How to enable USB drive and CDwrite in Trusted Solaris.
hello
I installed Trusted Solaris extensions in an X86 desktop and after that the cdwrite disappeared, the usb drive is not detected.
How do I enable the CD writer and the zip drive ? I have a file to be copied urgently, the USB drive doesn't work, the CD writer is not seen on the menu and internet / email is still not functional on this desktop
If there are some commands to be typed, please give me step by step instructions with command syntax and if there is a file to be altered please let me know where to find that file to be altered.
Thank you.
Hi Amit,
It's the same for Solaris. Take care about the line breaks in the document (sometimes one command seems to be two commands, it's one with parameters) and there is also a small bug: On page 6, step 5, it must read "Directory = topicmaps/example" (as printed in the screenshot).
Hope it helps
Detlev
Similar Messages
-
How to enable USB drive in Virtual Machine Oracle VM?
Hi,
I just create Oracle Enterprise Linux 5.3 and Windows server 2003 Virtual Machine in Oracle VM. I want to use USB drive in each virtual machine.
How to enable USB drive in Virtual Machine Oracle VM?
Thank you very much for your helping.
FujimaruHi,
Have you integrated VMM and SCOM?
Hope the links below could be helpful:
Operations Manager Integration and PRO Improvements in SCVMM 2012
http://blogs.technet.com/b/scvmm/archive/2011/04/14/operations-manager-integration-and-pro-improvements-in-scvmm-2012.aspx
Integrating VMM 2012 and OpsMgr 2012
http://blogs.technet.com/b/kevinholman/archive/2012/08/21/integrating-vmm-2012-and-opsmgr-2012.aspx
And please also search for "IP address Pool" under monitors or rules, hope you may find something related there.
Regards,
Yan Li
Please remember to mark the replies as answers if they help and unmark them if they provide no help. -
How do i get files larger than 2 gigs on a usb drive and still be able to use on a mac and pc?
how do i get files larger than 2 gigs on a usb drive and still be able to use on a mac and pc?
You can format the drive using ExFAT or you can format the drive NTFS then use third-party software on the Mac to enable writing to it: NTFS 11.2.443.
Disk Utility 12.x- Format a disk for Windows computers -
How to: Usb drive and folder uptodate?
Hey,
always on the go, and i have a usb drive and i'm trying to keep my school files updated from one to another with the most current version of the files.
trying to figured something out with Automator
ThanksAutomator, as you have probably figured out, does not have an action to specifically syncronize files found in two different locations.
If you are only moving files one way at any one time then you can piece together the following actions to do the job:
1) Find Finder Items (options for where to look and what to look for - multiple whose criteria are possible
2) View Results - good idea for seeing what is going on with the various selections you might want to use in step 1
3) Copy Finder Items - if you are copying to the Flashdisk you need to have it connected to select it in this step
You should build two of these, one for the computer -> flashdisk and one for the flashdisk -> computer activities.
Syncronizing both ways at the same time is much more problematic with Automator and if you are transferring files two directions within the same day I am not sure this set of actions will work.
PowerBook 12" Mac OS X (10.4.6) -
how to lock a drive and/or folder if there is no lock icon in the get info field?, how to lock a drive and/or folder if there is no lock icon in the get info field?
You can create an encrypted disk image.
http://www.macworld.com/article/1154559/password_protect_folders.html -
How to enable DDE communication and Network DDE DSDM on windows 7
How to enable DDE communication and Network DDE DSDM on windows 7
Hi,
For Network DDE to function, NetDDE.EXE needs to be installed and running on both machines before attempting to conduct a Network DDE conversation. NetDDE.exe is a Windows Service system file that is used to communicate the shared dynamic data exchange used
by Network DDE. It has no graphical user interface (it runs as a background Windows service).
For more information, please refer to this article:
http://www.citect-webhelp.schneider-electric.com/vijeo/Content/Starting_network_DDE_services.html
http://support.ge-ip.com/support/index?page=kbchannel&id=S:KB15377&actp=search
Please Note: Since the website is not hosted by Microsoft, the link may change without notice. Microsoft does not guarantee the accuracy of this information.
Karen Hu
TechNet Community Support -
How to mount usb drives in osx maverick?
Tried to connect external usb drive and got thel following message:
NTFS-3G could not mount /dev/rdisk5s1
at /Volumes/FreeAgent Drive because the following problem occurred:
/Library/Filesystems/fusefs.kext faailed to load - (libkern/kext) link error, check the system/kernel logs fir errors or try kextutil(8). the MacFUSE file system is not available (71)Other t han Paragon NTFS for OS X which has been supported and works fine the others have had trouble since 10.7.3 era.
I use both Paragon NTFS and also their HFS+ for Windows. The demo is fully functional for 10 days and is under $20 (may be on sale too).
The software that some drive cases come with are often the source of trouble and best not to install, and to reformat the drive as well.
I believe Paragon has a utility to convert a drive to/from NTFS and HFS but check their site.
www.paragon-software.com -
Can anyone tell me how to setup odbc driver and configure in the setup
Can anyone tell me how to setup odbc driver and configure in the setup
You can't switch languages in OS X programs, just in the OS itself. Insert the Leopard OS X disc, and choose your new preferred language when prompted.
-
How to Enable/Disable suppressUpload and suppressDownload
my xml doesnt have this attribute
how to enable /disable supressUpload and suppressDownload.
<?xml version="1.0" encoding="utf-8" ?>
- <MeRepApplication schemaVersion="1.1" id="ZAM_09" version="09">
<Property name="CLIENT.BUILDNUMBER" />
<Property name="C_APPLRESOLVE" />
<Property name="DATA_VISIBLE_SHARED">X</Property>
<Property name="E_APPLRESOLVE" />
<Property name="FACADE_C_CLIENT">X</Property>
<Property name="FACADE_E_CLIENT">X</Property>
<Property name="HOMEPAGE.INVISIBLE" />
<Property name="INITVALUE" />
<Property name="RUNTIME">JSP</Property>
<Property name="TYPE">APPLICATION</Property>
- <SyncBO id="ZAM_09" version="2" type="twoWay" allowCreate="false" allowModify="true" allowDelete="false" reqDirectSync="true" downloadOrder="1">
- <TopStructure name="TOP">
- <Field name="SYNC_KEY" type="N" length="10" decimalLength="0" signed="false" isKey="true" isIndex="true">
<Input type="create">false</Input>
<Input type="modify">false</Input>
</Field>
- <Field name="BUKRS" type="C" length="4" decimalLength="0" signed="false" isKey="false" isIndex="false">
<Input type="create">false</Input>
</Field>
- <Field name="ANLN1" type="C" length="12" decimalLength="0" signed="false" isKey="false" isIndex="false">
<Input type="create">false</Input>
</Field>
- <Field name="ANLN2" type="C" length="4" decimalLength="0" signed="false" isKey="false" isIndex="false">
<Input type="create">false</Input>
</Field>
- <ChildStructure name="010">
- <Field name="SYNC_KEY" type="N" length="10" decimalLength="0" signed="false" isKey="true" isIndex="true">
<Input type="create">false</Input>
<Input type="modify">false</Input>
</Field>
- <Field name="BUKRS" type="C" length="4" decimalLength="0" signed="false" isKey="false" isIndex="false">
<Input type="create">false</Input>
</Field>
- <Field name="ANLN1" type="C" length="12" decimalLength="0" signed="false" isKey="false" isIndex="false">
<Input type="create">false</Input>
</Field>
- <Field name="ANLN2" type="C" length="4" decimalLength="0" signed="false" isKey="false" isIndex="false">
<Input type="create">false</Input>
</Field>
- <Field name="KOSTL" type="C" length="10" decimalLength="0" signed="false" isKey="false" isIndex="false">
<Input type="create">false</Input>
</Field>
- <Field name="WERKS" type="C" length="4" decimalLength="0" signed="false" isKey="false" isIndex="false">
<Input type="create">false</Input>
</Field>
- <Field name="STORT" type="C" length="10" decimalLength="0" signed="false" isKey="false" isIndex="false">
<Input type="create">false</Input>
</Field>
- <Field name="TXT50" type="C" length="50" decimalLength="0" signed="false" isKey="false" isIndex="false">
<Input type="create">false</Input>
</Field>
- <Field name="TXA50" type="C" length="50" decimalLength="0" signed="false" isKey="false" isIndex="false">
<Input type="create">false</Input>
</Field>
</ChildStructure>
</TopStructure>
</SyncBO>
</MeRepApplication>Just adding on to Nameeta's post, there is a supress download checkbox in the advanced setting s link(Settings -> Advanced Settings) on the client, this will supress downloads for all syncbos and not just for any one syncbo. Also there are no tools in the middleware to add these settings, the only way to do this is to modify the xml manually.
Best Regards,
Karthik
Message was edited by:
Karthik V Setty -
How to enable ws-addressing and set ws-Reply to & message-Id ??
How to enable ws-addressing and set ws-Reply to & message-Id and all related properties. ???
I looked at the documentation but not sure how to do this.
Any Help is appreciated.No it is not possible to add the xml file to the already compiled war and not compiling again.
There are only two ways to add the policy file to weblogic deployed web service.
1: through the policy annotation in the web service java file.
2: through the admin console if the web service is deployed as a separate war.
thanks,
sandeep -
everytime i go to plug my ipod 5 in with the charger in to the mac desktop computer a message says "USB DEVICE DISABLED" "unplug the device using to much power to re-enable usb devices" and ever since i had got that message my charger had stopped working even plug into a wall outlet
ps.its my only charger and i need to know if i can fix this problem or my mac broke my chargerHey HoustonSmith, using to much power generally means a short. Do not use this cable, the lighting cables have a history of failure; shorting out. If within one year of purchase date take it to Apple, the cable also has a one year warranty, if short is do to manufacturing flaw and not abuse Apple will replace it free! Otherwise a new cable is around $30. You could also try a reset or restore, but don't think a glitch is your problem. If you do try to restore, just remember to make backup copies of all the info / data on this iPod to your computer first, then attempt to restore. Good luck. Cheers.
-
How to copy a networked TimeMachine backup to a USB drive and restore from it?
Hi,
I backup my MacBook Air with TimeMachine to my QNAP NAS which offers a TimeMachine backup service and I can restore data from it OK.
Working in IT, and being a bit paranoid about important data loss, I am concerned that if I was robbed or my house burnt down I would most likely lose both the MacBook and the TimeMachine Backup on my NAS :-(
To protect against this I have backup my (linux based) NAS to an external drive that I keep offsite. This drive is encrypted to keep my data secure with a Linux form of encryption (cryptsetup) and hence can't be plugged into a MacBook to try and restore from it - I doubt this would work either as the TimeMachine data is not located in the root of the drive.
So what I have done to test my restore process is to mount the encrypted NAS backup that include the TimeMachine backup folders on a Linux machine and then copy the TimeMachine data to the root of an HFS+ formatted external USB drive.
But, now I am stuck as how to try and restore something from this to my MacBook to see if the copy of the TimeMachine backup is good. If I press the Alt key on the TimeMachine icon, I can select an alternate backup device and when I enter TimeMachine to browse the data, I can browse the structure but there is no option to go back in time !! It seems like it is not possible to restore from this copy of the TimeMachine backup.
Does anyone know if this should be possible, and if so, what am I doing wrong here?
Rgds
GaryFor anyone else that may be in a similar situation, I can confirm that this does actually work.
I am unsure why I was not able to mount the original sparseimage that I copied to the USB drive before, but I have gone through the entire process again and I could successfully mount the TM sparseimage onto my MacBook and restore files from within it using TimeMachine to my Mac.
This is a Disaster Recovery solution only needed for if both my NAS and Macbook get stolen or damaged so I am happy with this solution for now.
I will try the restore process several more times from my monthly backups to reassure myself that the first failure to mount the sparse image was an anomaly.
This is the process that I have tested:
Configure MacBook to backup to TimeMachine Service running on QNAP NAS device.
Perform regular backup of QNAP NAS Device (Linux) including the TimeMachine backup data to an external USB drive with encryption enabled and store this device safely off-site
In time of loss of both NAS and MacBook, Time Machine data can be recovered to another Mac without the need of the NAS using the following process:
Mount the external drive containing the backup of the NAS filesystem (ext4) which is encrypted onto a Linux host so it is readable - use the cryptsetup luksOpen options to access the encrypted filesystem then mount it.
Mount a n empty HFS+ formatted USB drive on the Linux host
Use Rsync to copy the sparsebundle from the external NAS drive backup disk to the root of the USB Drive
Insert the HFS+ formatted USB containing the sparesbundle into the Mac's USB port
Double click the sparsebundle to mount it onto the Mac as a Volume
Using Alt button and the TimeMachine icon, select use alternative backup disk and you should see the TM backup in the sparsebundle
Enter TimeMachine and you should be able to restore any/all files
Hope that helps someone else and thanks to LaPastenague for pointing me in the direction of some of the answers I needed.
Rgds
Gary -
How to import m4a files in a USB drive and play them using iTune?
I have set the target directory of iTune to that USB drive, iTune just does not play them. The length of the playing is awful long. But in reality , they are merely 1min long reading when I listen to them using Window Media Player.
CS4 is much older than Windows 8. CS4 is meant to work on XP or Vista. Getting it to run on Windows 7 was a bit of an issue, so I'm pleasantly surprised to hear that you have CS4 running on Windows 8 at all.
It's also possible that a new camera records in a codec that such an old version of AE doesn't understand.
Make sure you're running the latest update to your version of AE. You're on version 9, so make sure you've run the Adobe After Effects CS4 9.0.3 Update (I would not suggest updating in the middle of a project though, as any changes might break AE). I would like to reiterate: you're running a version that was released six years ago on an operating system that was released much more recently. So, be careful how you tread. However, if you're not running 9.0.3, you're missing some bug fix updates that might solve your problem.
I would suggest upgrading to a newer version of AE.
That being said, as Dave mentions, CS4 and earlier had lots of trouble with MPEG-4 and other codecs that used interframe compression. Can you open the files in your version of Premiere? If so, you can use Premiere or the Adobe Media Encoder to convert to a proper intermediate codec. MOV is just a container format. QuickTime with the PNG codec will work in After Effects CS4 with no problems as will the other codecs Dave mentions. -
How to Enable USB Internet Dongles and only Block USB storage device from Group Policy
Hi ,
I have a very urgent requirement , Is there a way to disable the USB and only enable to Internet Dongle using Group policy.
Regards,
Schan.Hi,
Checkout the below link for restricting the access for USB devices using Group Policy,
http://www.windowsecurity.com/articles-tutorials/authentication_and_encryption/Control-USB-Devices-Group-Policy.html
Checkout the below thread on similar discussion,
http://social.technet.microsoft.com/Forums/en-US/89c8a8f0-da98-4cc9-8044-1e457e26840e/how-to-disable-usb-internet-dongle-datacard-from-group-policy-server-2008-r2?forum=winserverGP
Regards,
Gopi
www.jijitechnologies.com -
NEED HELP BADLY W/ USB DRIVE AND iBOOK!!!
I have an ibook 1.2 ghz and store everything (music,pics,etc.) on a Seagate USB 100 GB hard drive. Well, last night, the usb plug came out of the hard drive and now my ibook does not recognize my drive. When I plug in my drive, it says " THE DISK YOU INSERTED IS NOT READABLE BY THIS COMPUTER" and 3 choices INITIALIZE , IGNORE or EJECT. However, I downloaded a demo called Filesalvage, and it showed all of my files were still on my drive. Everything I own is on this drive 60 gigs of music, 15 gigs of photos. Can someone please shed some light on whats going on and how I can restore my drive back to normal?
I do own Tech Tool Pro 4. Can I use Tech Tool without spending 90 bucks on File Salvage? Any help is greatly appreciated.I opened Disc Utility and none of the repair option buttons are available. Is their maybe another repair utility? Here is the disc info:
Name : ST910021 A Media
Type : Disk
Disk Identifier : disk1
Media Name : ST910021 A Media
Media Type : Generic
Connection Bus : USB
Connection Type : External
USB Serial Number : CBA987786118
Partition Type : FDiskpartitionscheme
Writable : Yes
Ejectable : Yes
Mac OS 9 Drivers Installed : No
Location : External
Total Capacity : 93.2 GB (100,030,242,816 Bytes)
S.M.A.R.T. Status : Not Supported
Disk Number : 1
Partition Number : 0
Disk Identifier : disk1s1
Mount Point : Not mounted
Connection Bus : USB
Partition Type : WindowsFAT32
Writable : Yes
Capacity : 93.2 GB (100,027,597,824 Bytes)
Owners Enabled : No
Can Turn Owners Off : No
Can Be Formatted : No
Bootable : No
Supports Journaling : No
Journaled : No
S.M.A.R.T. Status : Not Supported
Disk Number : 1
Partition Number : 1
Maybe you are looking for
-
Can i use Stored procedures and triggers with SDK
hi all How to use the stored procedure and Triggers with SDK, can i get a sample code Regards Salah
-
How to implement a inputText include suggestion when input
Hi guys, In ADF, How to implement a inputText include suggestion when input, just like google suggestions ( when you type a char at inputText, it will give you relative suggestions for you to select ). Is there any ADF tag or other way to get that ?
-
Incorrect IDoc type ZSBB010 in the ALE defintion of the source system.
Hi, We have done client copy of BW production system into BW test system. I am getting following error while checking Test R/3 system in BW Administrator workbench. Diagnosis Incorrect IDoc type ZSBB010 in the ALE defintion of the source system. Syst
-
How come twitter doesn't go to the homepage since the iOS 5 update?
Ever since the ios5 update, I can't get on twitters homepage just the mobile page pulls up! Help!
-
Where are my title presets?
Well, actually I know they are on the hard drive, I found them. I can import them individually into my project from the hard drive. Why don't they show up as options in the titler where I can pick & choose? CS4/mac