How to Enable Week Level Planning instead of Day Level with ATPM

Hello Experts,
We've a requirement wherein, we would like to do Week Level Planning instead of Day Level.
But as soon as, we remove CALDAY from the DSO/aggregation level, the planning layout doesn't get rendered.
Hence we need to always add CALDAY in Planning DSO and Aggregation level.
How can we get rid of this?
We are on BW SP7.4 SP6.
It would be great, if you can share your expert opinion on this.
Thanks & regards,
Jomy

Hello Experts,
I was able to figure out how can we enable the week level planning. There are some more finer aspects which needs to be flushed out but atleast I can see that planning is possible on Week Level.
Thanks & regards,
Jomy

Similar Messages

How to enable automatic punctuation on a new MacBook Pro with retina?

Can you tell me how to enable automatic punctuation on a new MacBook Pro with retina? Thanks

In which application? (There is no system wide punctuation.)
And how is the computer supposed to know what is the correct punctuation? For example "Let's eat, Mom!" versus "Let's eat Mom!" (Sort of depends upon whether your computer has weathered the zombie apocalypse, I guess.)

Need idea on how to implement this - repeating monthly data on day level

Hi all, i had run into the following thing, this may soung easy, but i'm searching for the best solution:
i have a dataset per the stores of the customer, the dataset is an asset count on the end of the specific month. I must not sum the data between two/N months.
We they need to do several querries like
sales/assets/day
Sales/itemgroup/asset/day
sales/salesperson/asset/day
etc.
My problem is that i have this data on a month&store level, but i need to provide a solution, so it could be handled as a "global" value on that, so they can query it "almost any ways".
I don't really want to generate day/other level data based on this, so any tricks, how to repeat the data in all lines for that specific month on presentation/Business level?
All ideas are welcome.
Thanks&Regards,
D
Edited by: user8113564 on 2012.09.11. 4:52

Sorry if I took this wrong but are you try to do level based measured
Take the same physical column in the fact and have one aggregated at a month level and the other at a day level.
If yes, make sure you build a date dimension hierarchy and mapped at the correct level to the fact. Then take your measure and correctly define them at the correct level, day, month etc
This should sort it out

How to enable BPEL loggers at domain and system level ?

As far as I know there are two kind of BPEL loggers
- at domain and
- system level
Where EXACTLY can I enable/disable them resp. set them to e.g. DEBUG mode?
Peter

Apart from the posts mentioned above, please note that log4j-config.xml is the files that has these logging entries.
For domain level : SOA_ORACLE_HOME\bpel\domains\default\config\log4j-config.xml
For system level : SOA_ORACLE_HOME\bpel\system\config\log4j-config.xml
You set these loggers on domain level or system level depending on the information you are interested to see, so set that particular logger.

How to enable Party Information DFF at the branch level only in R12

As we all know now bank and branch information are stored at the HZ_Parties level. I want to have a DFF only at the branch level.
This DFF shouldn't appear in neither at bank level, customer maintence level or supplier level.
I tried to build by custom value set(CE_BANK_BRACHES_V) and attached to the above DFF context and still now luck to show the DFF at only the branch level.
Any ideas???
Thanks

Hi,
This can be done by personalize the BWC screen by clicking on the personalization at the top left corner.
Regards,
Kamal Khafagy

How can i calculate my planned and actual labour cost with fields from tab

Hi,
i want to calculate my planned labour cost for all operations in my production order. how can i retrive form the tables and how the actual planned cost gets calcualted. where can i see the overhed calcualtion of the material and labour.
please suggest.
regards
madan

Hi,
Planned cost is nothing but the Standard values which you give for each opearation in the routing.
The actual values from the confirmation for production order
The following table and fields you can get the values
PLPO, AFVC - look for setup time,labor time,machine time fields
AFRU - look for the required fields setup,labor,mcahine time etc
Thanks and regards
Murugesa

How to create 200 individual pdfs instead of 1 pdf with 200 pages? (Page breaks?)

Hi,
Is there a way to create multiple reports using SQL Reporting Services (2008 R2) using one dataset, instead of one long report.
For example, running a batch of customer statements or bills etc.
At the moment, our report runs well but creates one pdf with 200 pages, instead of 200 individual pdfs with each page being for a different customer.
I was thinking there might be a page break setting to create separate outputs but haven't been able to find anything.
Any advice appreciated
Thanks!
Lea

Hi Lea,
If we want to export the report to the multiple PDF files based on each page, I suggest you can use data-driven subscription which provides a way to use dynamic subscription data that is retrieved from an external data source at run time. For more detail
information about data-driven subscription, please refer to the following document:
http://msdn.microsoft.com/en-us/library/ms159150(v=sql.110).aspx
Besides, we can also use the SQL Server Reporting Services web services to render reports to specify folders. For more details, please see the similar thread:
http://social.msdn.microsoft.com/Forums/sqlserver/en-US/ecef8799-a0a5-42dd-97f8-bc269a7daa87/ssrs-multiple-pdf-files-for-a-single-report-agent-commision
Hope this helps.
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support

How to enable AMD Radeon R9 M295X on 5K iMac with Premiere Pro CC

Hello everyone,
I realize that the graphics card which comes with the 5K iMac (AMD Radeon M290X and M295X) is not one of the recommended cards for Adobe Premiere according to the System Requirements page on Adobes website. At this point, I have not been able to enable the R9 M295X in Premiere. What is the step by step process to accomplish this?
Thank you very much,
LC

There isn't a real "process" like there was in the CS-days. Then, there was a list put on your computer that PrPro read, and if the card it found was on the list, it used it. So ... if yours wasn't, you could find that file, edit it (it was a basic txt file) and add in the official hardware name of your card.
There is no such list for the CC versions of the Adobe DVA's. PrPro uses any card it recognizes has some usable parts for the work it's doing. So that part isn't "fixable". What you can do is check to see if you have the correct settings enabled for the card ... I think the nVidia cards use OpenGl and AMD OpenCL ... something like that? You do need to make sure that the correct one is enabled on your computer.
Neil

How to enable bluetooth icon in task bar in rmbp with windows 8

The bluetooth icon dose not be showed in task bar in rmbp with windows 8.
The device of bluetooth dose not work correctly in device manager of windows 8 with the yellow exclamation mark.
The windows system event log shows BTHUSB alerts and error with code of 3 and 17. The driver is unloaded.
Some apple magic mouse's functions can work, without sliding to navigate.
The current OS is in bios enumeration mode with MBR and The logged user is in the normal account and the bootcamp is newest.
I have remembered that the bluetooth was good without above problems when the windows 8 was installed firstly and the bootcamp can not work in administrator account. After being restored NVRAM with option+command+p+r and reinstalled windows 8 enterprise 64 completely again, it shows these problems when the bootcamp works well.
Except the first windows installation, the second time is selecting EFI boot and the last time is in normal mode, which has no difference in the bluetooth problem. In a normal or administrator account, the same problems appear.

The bluetooth drive problems have disappeared after the following steps:
reset intel SMC
remove the bluetooth device with yellow mark.
scan system device changes. find 3 devices without any yellow mark: (a) Apple Broadcom Built-in Bluetooth, (b) Microsoft Bluetooth Enumerator, (c) Microsoft Bluetooth LE Enumerator.
find magic mouse and it works well with all functions. and the icon appears in the taskbar.
no BTHUSB error is in system log.
I don't know the right reasons. Maybe the efi windows installation has changed rmbp efi settings.

How to enable SSID broadcast? (E4200 Cloud f/w)

I got E4200 v.2 with the latest cloud firmware. On the previous (non-cloud) firmware there was an option to enable or disable SSID broadcast, and I disable it. Now I want to enable it back, but can not find this option in Cisco Connect Cloud.
So there is a question: how to enable SSID broadcast on the E4200 v.2 with Cisco Connect Cloud firmware?
wbr, bg

In your case, you need to reset the router to factory defaults, at which point the SSID will be set to broadcast and it cannot be disabled. To know more about why there is no option to disable the SSID broadcast anymore on the Cloud firmware, click here.

How can i check the planned data vs actual data

How can i check the planned data vs actual data with the infocubes?

Hi Srinivas,
You create one cube for plan data and create another cube for actual data.
Create a multiprovider and give comparision report. this is betterway.
Or you can also load actual and plan data in one cube but you need to maintain one character like version to seperate atual and plan data.This is not a good work.
Regards,
Vijay.

Manage Day Level in BPC Dimension

Hi Experts,
Need your external point of view and analysis,
A client need to manage their Gross Sales at Day Level.
we though to manage this in a specific model , by using a standard Time Dimension , and then a User defined Dimension to manage the day level by using generic day.
With this way of working, we could avoid duplicating 365 day split by year, considering that the calendar should be managed by transactional data to,for example, take in consideration bixestil year or calendar day offset between years, using EVCOM function to make dynamic description.
What should be your recommandations ?
Tks a lot,

Try this:
1) Select "Month" in your Column Selector.
2) Now go to Criteria mode. The "Month" column from the Column Selector should be there. Click on the Column Properties of the column and set Value Interaction to "No Interaction."
3) Save your report.
4) Go back to Results tab and re-select your "default" column in the column selector and Save report again.
Edited by: David_T on May 17, 2010 12:03 PM

How to perform high-level planning without doing full costctr-level rollup

I am wondering what my options are for this effort - we want to start our 2009 budget season by first preparing a high-level 2009 plan. To do the high-level plan we'd like to avoid building and interfacing workbooks at the cost center level; instead, to get started, we want to look at groups of cost centers that represent the different lines of business of the Bank (retail, credit, etc).
Here's my question:is it possible to build planning workbooks not at the cost center level, but at a cost center rollup level? That is, we'd like to avoid having 10 workbooks at the cost center level that make up the rollup "Mortgage Lending"; instead we want one workbook for Mortgage lending that includes data for all 10 of those CC's.
Please let me know if you have any ideas as to how to do so, thanks, W

I am wondering what my options are for this effort - we want to start our 2009 budget season by first preparing a high-level 2009 plan. To do the high-level plan we'd like to avoid building and interfacing workbooks at the cost center level; instead, to get started, we want to look at groups of cost centers that represent the different lines of business of the Bank (retail, credit, etc).
Here's my question:is it possible to build planning workbooks not at the cost center level, but at a cost center rollup level? That is, we'd like to avoid having 10 workbooks at the cost center level that make up the rollup "Mortgage Lending"; instead we want one workbook for Mortgage lending that includes data for all 10 of those CC's.
Please let me know if you have any ideas as to how to do so, thanks, W

How to enable Billing plan tab in sales order (lean) with NWBC

Dear All,
The Billing plan tab in sales order (lean) is not availabe with NWBC. How to enable this tab?
Is there is any documentation to do the modifications of NWBC's webdynpro screens?
for example, there is a standard webdynpro screen in NWBC from SAP best practices to create sales order (lean). The lean sale order screen having restricted elements and tabs when compare with standard SAP GUI (t code va01).
So I want to include the few missing tabs for data entry.
any documentation or solution?
thanks in advance,
Suresh Yerra.

Dear All,
Is there is any documentation to do the modifications of NWBC's webdynpro screens?
for example, there is a standard webdynpro screen in NWBC from SAP best practices to create sales order (lean). The lean sale order screen having restricted elements and tabs when compare with standard SAP GUI (t code va01).
So I want to include the few missing tabs for data entry.
any documentation or solution?
Thanks,
Suresh Yerra.

How to enable "top level navigation " in portal

Hi all,
I am unable to see the "top level Navigation" once I logged on to portal
Previously I was able to see that
I performed the following steps thats the reason why I am unable to see "top level navigation"
1 Logged on to portal
2 Content administration
3 Expanded Poratl Content
4 Expanded Content Provided by SAP
5 Expanded End User Content
6 Expanded Standard Poratl Users
7 Selected "Default Frame work Page"
8 In that selected Top Level navigation Iview and the iveiw properties I changed the property "Number of Display Levels " to "0" and choose save
As I have set "Number of Display Levels" to "0" I am unable to see "top level Navigation" Now,I want to change it to 2 for that I need to see the Content Administration role in the "Top Level navigation" Can anyone help me out how to enable "Top level Navigation"
Thanks in advance

undo the changes what you have done.
after you logon to the portal try the url below...this should take you to content admin directly from there modify the framework page and reset the property of TLN
http://yourserver:port/irj/servlet/prt/portal/prtroot/com.sap.portal.pagebuilder.IviewModeProxy?iview_id=pcd%3Aportal_content%2Fadministrator%2Fsuper_admin%2Fsuper_admin_role%2Fcom.sap.portal.content_administration%2Fcom.sap.portal.content_admin_ws%2Fcom.sap.portal.portal_content&iview_mode=default
Thanks
GLM

How to Enable Week Level Planning instead of Day Level with ATPM

Similar Messages

Maybe you are looking for