How to enable wi-fi calling on iPhone 6 with Metro PCS

I have been with Metro PCS for about a month now. I purchased my iPhone 6 directly through Apple and it came with a T-Mobile sim card preinstalled. For a few months, I had T-Mobile as my provider and I was able to use Wi-Fi calling. However, with Metro PCS, I am currently having some issues. When I go to Phone and then the Wi-Fi calls option, I turn the Wi-Fi option on and a page pops up that is T-Mobile branded asking me to enter my E911 address. I do as requested and hit Save at the bottom of the page. When I get a message that it had been saved successfully, I click on the close button at the bottom of the page. Once the page closes, the Wi-Fi calls option is still not enabled. This does this to me every time. I have called MetroPCS numerous times and all they tell me is that they will update the address on their system and that it should work. It has never worked for me. MetroPCS has also refreshed my data settings and that still didn't solve my problem. I am completely clueless on what to do because MetroPCS is owned by T-Mobile, so I would assume that the Wi-Fi calling would work just as it does with T-Mobile.

Other than using voice over IP (Skype, etc) there is no WIFI calling capability on any iPhone.

Similar Messages

  • How to enable adobe reader8 call webservice

    i use livecycle to created blank form
    and connected to webservice by using wsdl file
    i drag and drop textboxs and button to use them to send and recive data from webservice
    it's work good on adobe pro 8 good but not work on adobe reader 8
    how to enable reader to call webservice

    And you need to add those Form Export Rights with an Adobe LiveCycle Reader Extensions Server.

  • How do I sync iMail on my iPhone with my iMac?

    How do I sync iMail on my iPhone with my iMac? I allways have to delete messages twice, once on my iPhone and once on my iMac. Can I sync them trough iCloud? I don't have a me.com email. Or is there another way?

    Maybe this will help:
    http://support.apple.com/kb/PH12117

  • In SQLScript, how to use EXEC to call another procedure with parameters in procedure?

    Hi experts,
    In SQLScript, How to use EXEC to call another procedure with input and output parameters in procedure?thanks very much

    Hi Sagar,
    thank you! I generate another procedure with an input parameter and an output parameter in a procedure. Then i need to call the generated procedure using EXEC. Here is my code:
    create procedure ftest1(out sum_num bigint)
    as
    begin
    declare fa_output bigint;
    declare v_sql_drop varchar(200);
    declare v_sql varchar(500);
    declare cursor c_cursor1 for select num from TABLE1;
    --v_sql_drop := 'drop procedure fe';
    --exec v_sql_drop;
    v_sql := 'create procedure fe(in i_num bigint,out o_num bigint) as begin';
    v_sql := :v_sql || ' o_num := :i_num * 2 + :i_num * :i_num;';
    v_sql := :v_sql || ' end';
    exec v_sql;
    open c_cursor1;
    for c_item as c_cursor1 do
    exec 'call fe(c_item.num,o_num=>fa_output)';
    if sum_num is null then
    sum_num := fa_output;
    else
    sum_num := :sum_num + fa_output;
    end if;
    end for;
    close c_cursor1;
    end;
    The underline code is using exec to call the generated procedure. But this method cannot work. Any suggestion? thanks again!

  • How do i change apple ID on iPhone with OS5?

    how do i change apple ID on iphone with os5?

    You delete and redownload those applications; they have an Apple ID stored inside them.
    (120924)

  • Good Morning.  How do I delete directly from the iPhone, with out synching, movies and/or tvshows?

    Good Morning.  How do I delete directly from the iPhone, with out synching, movies and/or tvshows?

    I had the same problem with Iphone 5 iOS 8, none of the methods described above were successful.
    Finally, Iexplorer helped to solve my problem.
    http://iexplorer-support.macroplant.com/customer/portal/articles/1325738-how-to- delete-all-photos-from-an-iphone-or-ipad
    best regards,
    salad

  • I recently bought a new iphone 5s from UAE , but unfortunately i did not find the facetime on my new iphone, how come that i bought a new iphone with missing options , please help

    i recently bought a new iphone 5s from UAE , but unfortunately i did not find the facetime on my new iphone, how come that i bought a new iphone with missing options , please help

    Your earlier phone must have been originally intended for sale in another country and must have been purchased from somewhere other than an authorized Apple retailer. Phones that are intended to be sold in the UAE have FaceTime permanently disabled. The option is not there and cannot be made to work.

  • How to use facetime to call my iphone 4s?

    I have an ipad2 & i cant used facetime to call my iphone 4s & vice versa.

    Are the two devices using two seperate Apple IDs? You can't call yourself on facetime as far as I know. Someone else has to call you and the call is sent to your Apple ID (and any Mac OS or iOS devices that use the same ID).

  • How to Enable Full text search in UCM with Oracle 10g

    Hi,
    Can you please guide me on how to enable full text search in UCM after I have installed it. My database is Oracle 10g. It would be great if you could guide me through the steps since I am very new to this product.
    Regards
    Ashish

    Hi
    Are you sure that your indexer is finishing without any errors? Check activeindex.hda under \search directory to see what is the variable set for activeindex variable? If Oracle Text is the indexer search enabled then the variable activeindex should either OTS1 or OTS2. If anything else then you have indexer problems that is not indexing documents.
    Check the CS log file to see if indexer errors are shown there. If yes, then put it over here so that we can analyse it.
    Hope it helps
    Thanks
    Srinath

  • How can I reset and clear my iphone with no wifi

    How can I reset and clear m iphone without any wifi

    Settings > General > Reset > Erase All Content & Settings

  • How to sync the calendar of my iPhone with I pad

    How to sync the calendar of my iPhone 4s with my ipad

    See this http://www.apple.com/icloud/setup/

  • How to find the perticular call is made with in +30 or -30 minutes.

    hello masters ,
      i got a repoting requirement such that i have to track the "calls made with in +30 or -30 minutes".

    Hi
    Pls provide more info. You mean to say you have to track the calls made 30 minutes prior and 30 minutes afterwards...how you know that afterwards calls which will be made..
    Regards
    N Ganesh

  • HT4061 I have an iPhone 3G , it is not connected to any Company, but before was in AT&T.- and i want to connect it with Metro PCS, I follow all instruction for unblocked but the IMEI doesn't appear on the Screen phone.- In the card the number is 15 digit

    I have a iPhone 3G,.- I has been a gift from my son who bought another model more sofisticated.
    I wish to unlock it and pass from AT&T to metro PCS because I use so much my phone for business issue and it is more economic for me use Metro. ok
    I paid around $ 20.00 for unlocked and the company requested a number that must to appear when I dial *#06#.- I did it but nothing wrong.- The Company told me  "remove the card in the top" but the number has more than 15 digits : (20 digits) so, I got the first 15, but the company said those are not right.-
    In a conversation with them, they recommended to go to the Apple page in the web, and I have been travelling and I found to be member of this group, because I think, after that, i can help others too,
    i am electrical Engineer since 1974 and recently finished an Associated in electronic.- I am 63 years old and love to work in Industrial System in Power, Control and Electronic.- Although I have my own business, i want to work for a company because I love the industry, and , in order to get the money from customers, is each day harder, so, I prefer to work in the Industry System and do my own projects in my extra time since I never ever think in retairement because my work is a pleasure.

    ONLY AT&T can legally/legitimately unlock it.  No one else at all.

  • TS4268 How to make cellular video call in iPhone 4S

    How to make video call in my iPhone 4S

    Did you purchase from an authorized source? I ask, because FaceTime is banned in some Middle East countries, and if you purchase from a non-authorized source, odds are you're gonna get an iPhone that originated in a country where FaceTime is banned. I suspect this is the case with your phone.

  • How to retrieve  part missing call list iphone 5

    can anyone tell me how to retieve missing call times from my iphone 5

    Sorry, I don't understand what you think is missing.
    The recent calls list holds the last 100 calls. If you need to go back further, check the detailed billing from your carrier.

Maybe you are looking for

  • Making subtitles in FCE4, titles suddenly need to be rendered

    If anyone out there can explain this it would be great. I am using FCE4, making subtitles using Text / Outline Text in the pulldown menu of the viewer window. I create my text and then pull it down using the wireframe so it sits i the lower third and

  • QaaWS End Point Support in XI 3.1 SP3

    Based on the BOE XI 3.1 SP3 Supported Platforms documentation, Xcelsius Query As A Web Services EndPoint is no longer supported for WebLogic 10.3, WebSphere 7, Oracle App Server, or Tomcat 6.  Does anyone know if this support will be "restored" in a

  • Converting data through mapping table

    Member names of account dimension in our Essbase will be changed totally.In Excel we have a mapping table which tells how new accounts corresponds to old accounts. Number of accounts is about 800.How this conversion procedure should technically be do

  • Preview Problem - Fine When Uploaded

    I'm working on this page: http://www.autosurftech.info/pift Looks great... but when I preview it in Dreamweaver it looks like this:

  • Differences in Data Source Navigation Path

    Can anyone tell me why some instances/implementations of WebLogic have different navigation paths to Data Sources? I've seen the following: Example 1: Domain Structure > Services > Data Sources (Console version 12.1.1.0) Example 2: Domain Structure >