How to Enable XMP in BIOS of TS140 Server 70A4 00HUX

I installed 4X8GB DIMM's pc3-12800 ddr3-1600 in a TS 140.   I am running Win 7 64-bit Pro OS to use it as a HTPC/Media Server.   The WEI should be maxed out but it is only 7.4.   I was checking other sites which suggest that the clock speed may be set to 1333MHz instead of the 1600MHz that these DIMM's are capable of.
I checked the BIOS and there are no settings which will enable Intel XMP or allow me to manually set the clock speed or timing for these DIMM's.
Can someone tell me how/where to access and change this in the BiOS?   I have a 70A4 00HUX model

Quote from: rp00 on 03-June-15, 22:47:43
but if you set your mem settings to auto, it should pick up 1866 speed from SPD
Check with CPU-Z
Such is not possible. Programmed SPD settings to be used depend on the abilities of the memory controller (here means the cpu) used. The maximum specified memory support of an i7 4790K is DDR3 and DDR3L 1333/1600 (http://ark.intel.com/products/80807/Intel-Core-i7-4790K-Processor-8M-Cache-up-to-4_40-GHz). It is therefor impossible to run memory without an XMP extension (like the Fury sticks) on the platform in question above ddr3 1600 without setting speeds and timings manually.

Similar Messages

How to Enable Lync Windowphone agent on Lync Server 2010

How to Enable Lync Windowphone agent on Lync Server 2010 ?

Can you please elaborate. Do you mean to enable a Lync user to use the Lync Mobile Client for Windows mobile devices in a Lync 2010 environment?
If so, in Lync 2010 there is no special enable setup other than allow the user to have remote access. Of course the MCX service needs to be working.
Look forward to more details
Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question, please click "Mark As Answer"
Lync Sorted blog

[Troubleshoot] MSI Gaming 7 ~ How to enable XMP with HyperX Fury RAM?

Hi folks,
First time posting here and new to the MSI brand with a Gaming 7 and MSI GTX 970 Gaming 4G GPU. They are quite awesome so far.
Anyway, I'm also new to the intel world after using AMD chips for the past number of years and I am wondering what is this buzz about XMP profiles? My new RAM sticks support XMP according to their website. But I'm not sure how to enable them in the UEFI Bios. Videos show that there should be a button right above the GENIE OC but I dont see one. Can someone help me understand how to enable it?
Spec info:
Intel 4790k
Gaming 7 Motherboard
HyperX Fury RAM, 2x8GB (16GB) 1866mhz
EDIT: I cannot share external links but if you search xmp hyperx certifications you'll see that the RAM is XMP ready.
Thanks!

Quote from: rp00 on 03-June-15, 22:47:43
but if you set your mem settings to auto, it should pick up 1866 speed from SPD
Check with CPU-Z
Such is not possible. Programmed SPD settings to be used depend on the abilities of the memory controller (here means the cpu) used. The maximum specified memory support of an i7 4790K is DDR3 and DDR3L 1333/1600 (http://ark.intel.com/products/80807/Intel-Core-i7-4790K-Processor-8M-Cache-up-to-4_40-GHz). It is therefor impossible to run memory without an XMP extension (like the Fury sticks) on the platform in question above ddr3 1600 without setting speeds and timings manually.

Can't Enable XMP after BIOS flash to V1.4 on P55-GD85

I didn't put this in the BIOS section because while the BIOS is involved, I don't think it's necessarily a BIOS issue. However, if it should go there please move it.
While not new to computers by any stretch I committed the cardinal sin of updating my BIOS when I didn't absolutely have to. While their were some issues I'd hoped would be fixed with a new BIOS revision, they weren't critical.
I have a i7 860 Lynnfield system running Win 7 Home Premium 64 with a MSI P55-GD85 mobo which has been running fine since being built in March of this year. This was the first BIOS flash since I've built the system. The system came with either V1.0 or V1.1 (I think it was V1.1). I checked using Live Update (yes, I now know this is bad) and found there had been several udpates since my current version. I went ahead and used Live Update to flash the BIOS (yes, I know...not a good idea). Contrary to the horror stories the flash itself went fine. I watched it flash the BIOS and everything verified fine. Of course after the update I had to reset my BIOS settings to get the system to run which went fine. The problem is that the one thing I can't do is enable the XMP option for the memory without the system crashing. If I enable this option the system will POST and then do a memory dump before ever getting to the desktop. Without turning this option on I can't take full advantage of my RAM. I am running G.SKILL Trident 4GB (2 x 2GB) 240-Pin DDR3 SDRAM DDR3 2000 (PC3 16000) which are XMP compliant and ran without issue up until the BIOS update. It is possible that there is some other setting that I didn't reset after the BIOS change to allow this to work that I am missing. I know I did a bunch of tweaking and changing of settings trying to get things to run correctly when I first built the system. I've gone over and over the BIOS and can't find anything else to try to get me to allow to enable the XMP option without crashing. By simply enabling that option my system would normally run stable at about 3.6-3.7GHz.
Does anyone have any ideas as to why this might be happening or what I can do about it? About the only other thing I can think of is to reflash the BIOS back to a previous version to see if that helps. I am sure there is something I am missing as there is no reason the BIOS shouldn't allow the XMP feature to be enabled without crashing. Any help would be most appreciated. Thanks.

Have you try to increase your RAM voltage to 1.55v ~1.6v?

No Virtualization Enable Setting in BIOS for TS140?

There is no Virtualization Setting in the BIOS (version 48A released date 8/26/13) of the new TS140. I have installed server 2012 but not able to install Hyper-V option. Called Lenovo Tech Support but he told me that if the Intel Chipset driver is installed then Virtualization is enabled. I double checked that it has the correct software driver installed but see no possibility of enabling VTx from within server 2012 OS. I hope this message would go to the LENOVO support guru and Please let me know if the VTx enabling setting will be implemented in the future releases of the BIOS. Thank you.
Solved!
Go to Solution.

Lenovo Tech Support Dale found out that the BIOS setting is under Advanced - CPU setup <enter> then Virtualization setting is in there. It works now! It was me who missed it while navigating several time into its BIOS...

Dv6-6135dx - How to Enable AHCI in bios for use in Windows 7 64bit

I bought the dv6-6135dx notebook some time back.
I recently got a Solid State Disk and I would like to turn on the Trim, feature.
To turn Trim on I need to enable AHCI. There is no such option in bios. How can I turn AHCI on?
I found an unlocked version of the bios that turns on apparently disabled menus, but that may or may not corrupt the bios and I'd like to not have to resort to that.

Hi,
It's there by default, why do you need to enable it ?
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

How to enable RewriteLog in Apache on OSX Server 4

Hi,
I'm having a hard time trying to enable RewriteLog in OS X Server 4 configuration file. It simply makes the server not responding after configuration files change.
I want to put these lines:
RewriteLog "/var/log/apache2/rewrite_log"
RewriteLogLevel 3
I tried to put these in different locations like in:
/Library/Server/Web/Config/apache2/sites/0000_any_80_.conf
or in
/Library/Server/Web/Config/apache2/httpd_server_app.conf
And in the host config but it doesn't work.
I touched and changed the mode of the file /var/log/apache2/rewrite_log to 777 in case ... still not working
As soon as I put theses lines the web server seems to be crashed even though it states to be restarted with a green light on the UI.
'serveradmin status web' reports it to be running.
Now if I remove the 2 lines and restart the server the server responds again to http requests but I have no debug log of the rewrite rules.
It looks like the apache config is not well parsed or something. 'serveradmin settings web' does not mention the RewriteLog path.
So what should I do to have RewriteLog working in OS X Server?
Thanks for any help.

Ok so I make this reply to myself for anyone who could encounter the same issue.
Server 4.0 comes bundled with Apache 2.4.9 and since 2.4 the mod_rewrite logging config is now a bit different, thus, the RewriteLog* statements are not recognized anymore by apache. The correct syntax is for example:
LogLevel alert rewrite:trace3
The files to put this on are the ones I mentioned in my post.
One last side note, it would be very handy to be able to do a syntax check of the apache conf like with 'apachectl -S' on the server. But I've not found how one would do that with serveradmin. If anyone knows I'd be very pleased to know how.

How to enable Portfolio Analysis Feature for Project Server 2010?

Hi,
We have a Project Server 2010 instance. We now want to Use the Portfolio Analysis on our server. How can we enable the feature on our existing environment without disturbing any current feature that we have ?
If someone can provide with the detailed steps for the configuration process that will be helpful.
Thanks

Hi ,
The portfolio feature is part of the out of the boxProject Server 2010 solution. Maybe you just have to unhide the links in the quick launch menu. It will not disturb any of your current configuration.
Please find here a couple of links:
https://login.live.com/login.srf?wa=wsignin1.0&rpsnv=12&checkda=1&ct=1397216770&rver=6.0.5276.0&wp=MCLBI&wlcxt=technet%24technet%24technet&wreply=http%3a%2f%2ftechnet.microsoft.com%2fen-us%2flibrary%2fgg715564%2528v%3doffice.14%2529.aspx&lc=1033&id=254354&mkt=en-US
http://azlav.umtblog.com/2012/04/10/resource-plans-and-portfolio-analysis/
Hope this helps.
Guillaume Rouyre - MBA, MCP, MCTS

How to enable report print or configure print server

Hi All.
Currently using lastest Apex version (4.1.x) with 11g XE.
Where can i find info, example etc. to enable report printing? When i access this attribute section, i get a red warning message saying there is no print servver configure.
Regards, Luis ....!

Here is a whitepaper that should answer your questions..
http://www.oracle.com/technetwork/developer-tools/apex/application-express/configure-printing-093060.html
Thank you,
Tony Miller
Dallas, TX

How to enable fastcgi on sun one web server 6.1 SP6

Hi, all
I fail to install fastcgi on sun one web server 6.1 SP6. When i access php page, the following errors are displayed in error log.
[18/Oct/2006:14:08:45] failure (21781): for host x.x.x.x trying to GET /chkwww.php, responder-fastcgi reports: FCGI1062: Stat failure
[18/Oct/2006:14:08:45] failure (21781): for host x.x.x.x trying to GET /chkwww.php, responder-fastcgi reports: FCGI1073: Unable to service the request even after trying 0 times
The following is the environment:
Web Server path: /i03_01/SUNWebSP6
PHP 4.4.2 installation path: /i03_01/php-fcgi
PHP library path: /i03_01/php-lib
PHP configuration: ./configure prefix=/i03_01/php-fcgi enable-fastcgi with-mysql=/i03_01/tmp/mysql-standard-4.1.12-sun-solaris2.8-sparc enable-mbstring=all enable-mbregex enable-exif with-gd with-png-dir=/i03_01/php-lib with-zlib-dir=/i03_01/php-lib with-jpeg-dir=/i03_01/php-lib with-t1lib=/i03_01/php-lib with-freetype-dir=/i03_01/php-lib
libfastcgi.so path: /i03_01/SUNWebSP6/bin
The following is my configuration:
In mime.types, add this line at the bottom:
type=magnus-internal/fastcgi exts=php,php3,php4
In magnus.conf, add this line at the bottom:
Init fn=load-modules shlib="/i03_01/SUNWebSP6/bin/libfastcgi.so"
In obj.conf, add these lines at the top.
<Object name="default">
Service type="magnus-internal/fastcgi"
fn="responder-fastcgi"
app-path="/i03_01/php-fcgi/bin/php"
min-procs="1"
app-env="PHP_FCGI_CHILDREN=1"
app-env="PHP_FCGI_MAX_REQUEST=200"
app-env="PHPRC=/i03_01/SUNWebSP6/https-www/config"
</Object>
Anyone can help me? Thanks.
Message was edited by:
polyuitjerry

Stat failure is caused when either Fastcgistub or app-path is not accessible.
Is "Fastcgistub" executable too in /i03_01/SUNWebSP6/bin directory ? If not, then copy it to that directory. Make sure it has exec permission.
Do you see Fastcgistub process ? If yes, then check the app-path (/i03_01/php-fcgi/bin/php). Is it accessible ?
And also, check "Fastcgistub.log" file under <webserver-temp-dir> directory for any error msgs.

How to enable Reverse Proxy in Oracle HTTP Server ?

What modules need to Loaded? What configure need to be done to enable Reverse Proxy in OHS.
I tried many times but impossible to enable it.

I have done it!
after follow this guide :D
http://mjohal.wordpress.com/2007/01/17/configuring-reverse-proxy-in-front-of-oracleas-10g-sso/

How to enable the memory remapping in the bios?

How to enable the memory remapping in the bios?
my laptop: m100 psmaaq-00s003

Without removing a specific Windows Update KB Patch, and two registry keys, you CANNOT uninstall the Flash Player ActiveX Plug-in for IE in Win 8.
Microsoft released a new update for Flash Player in IE just the other day.
Have you run Windows Update recently?

How to enable LCD sensor in Satellite C850-B374 after BIOS update?

Hi, friends
I m currently a satisfied Toshiba customer since april 2013. I have been using laptops since 2007 having used various brands I found Toshiba to be good one.
I have recently updated the Bios from 6.0 to 6.50 from the Toshiba service station.
Update was successful and the computer works fine.
But after rebooting the LCD sensor which activates the Power button in this specific model of laptop is not working. After entering the bios setting utility i came to know that ec version is 6 and bios version 6.50 At this point How to enable the lcd sensor to automatically boot while i open the lcd
Ashik

>How to enable the lcd sensor to automatically boot while i open the lcd
You want to boot up the notebook by opening the lid. Right?
In this case you have to enable the option within the Windows 8 system settings
[Why does my Windows 8 notebook start automatically when opening the display lid?|http://aps2.toshiba-tro.de/kb0/FAQ2C03FA0001R01.htm]
You have to look for the option called: +Panel Open - Power On" feature+
This option needs to be enabled in order to boot up the computer automatically when the display lid is open

How to Enable Quick post in BIOS setup?

Hi anyone,
does anyone know how to Enable Quick post in BIOS setup? This option does not seem to be there in setup or maybe Im not going about it the right way. Any help would be appreciated.
Cheers
muks

Quick post option does not exist and there is nothing to do. All you can try is to use some hardware diagnostic tool.

Unable to enable XMP on H81M-E34 and bios E7817IMS.H10

Brand new box with 4th GEN I3 haswell and corsair vengeance memory that will only run 1600mhz with XMP enabled. In bios, I can view XMP settings but not enable...please advise.

Yes, thanks for the suggestion - but the option is simply not available. I can view the modules XMP information, but there is no line or setting to enable it.
The memory modules 100% have XMP: http://www.corsair.com/en-us/vengeance-16gb-single-module-ddr3-memory-kit-cmz4gx3m1a1600c9
I have attached picture of the BIOS settings below:
Note: Only what is in [brackets] can be changed. Everything else auto adjusts based on other settings.
Note where it says X.M.P Support Information - This screen just shows the XMP timings with no option to change

How to Enable XMP in BIOS of TS140 Server 70A4 00HUX

Similar Messages

Maybe you are looking for