How to enchance a voice that sounds screechy

I know there is various ways to do this, but is there an easy approach to make a narrators voice sound less screechy? Preferably within STP or FCP.
It's a female voice and I can post a sample if needed.

Try boosting the bass around 200 Hz, using a parametric filter.
You could also use the parametric to boost a very narrow range of frequencies
in the upper midrange (1 kHz to 6 kHz, broadly speaking). Listen to the voice
as you sweep the frequency back and forth. Find the frequency that makes the
screechiness sound the worst. Then change the boost/cut control to cut instead
of boost.

Similar Messages

  • How can I turn a recorded voice into multiple voices that sound like a group of singers?

    I'm using Logic Pro 9. Could someone teach me how to turn a single recorded voice into multiple voices that sound like a group singing together
    by mixing or other techniques ? I don't have the luxury of a group singing together with me when I do recording. Advices would be much appreciated!

    By far the most natural way to achieve this is for the singer to perform multiple takes - even if you've only one singer. At it's simplest, you could just double track the vocal part, although I prefer 3 parts - panned centre, left & right. Then repeat this process for each harmony, & mix accordingly.
    Melodyne & some of the above methods do work on am single voice, but phase cancellation can be an issue if your not careful with each part's timing & panning. If you can only get a couple of decent takes from the singer, far better to perform any harmony/pitching techniques on the second take to avoid any phase issues. It's not uncommon for a singer to perform each vocal part 5-10 times, then comp (edit) the best takes so that you end up with 3 decent takes.
    If you've only only one voice to work with Antares Harmony EFX is a useful alternative.
    http://www.antarestech.com/products/harmony_efx.shtml

  • How to turn off tone that sounds when importing is done?

    Hello,
    Is it possible to stop iTunes from making the sound it does after I've imported a cd?
    I have Windows XP media center, and I went to the "Sounds and Audio Devices" folder in Control Panel, but it seems only Microsoft programs are listed there.
    Thanks!
    Dan

    According to Apple support, you cannot remove the phone on the device list under "find my iphone" until you turn it off and it goes offline.  (It also says the device will go back on "find my iphone" when it goes online again, which seems to mean you can successfully remove it, but as soon as you turn it back on it will be back on the list, and thus you will not be able to restore it.)  It's a bit of a conundrum.  In my case I couldn't for some reason turn off my phone  with the home/sleep buttons - nothing happens, the phone stays on.  While on a chat with Apple support, they got my iphone offline (I was able to turn it off by pressing the sleep button and swiping where the red "turn off iphone" arrow would have appeared) and removed it from "find my phone", but when I reconnected to itunes it turned on and reappeared in the "find my phone" list.  Luckily, the screen suddenly appeared (it had done this several times yesterday, just briefly), so I was able to turn off "find my device" from the phone.  I was then able to restore.  Unfortunately, this does not answer the question of how to remove the device from "find my iphone" and keep it off while connecting with itunes to restore (unless you have my good fortune of having the screen suddently reappear).  Apple support seemed puzzled that it had reappeared on the device list under "find my iphone".  Time will tell whether the restoration fixes the blank screen issue.

  • How to set up the default voice over sounds exactly like the Alex voice?

    Hi,
    Anyone know how can I find out the exactly settings of the New System Voice Over Sound that shipped with the v10.5 Leopard call Alex?
    When I first opened the Voice Over set up windows, a voice called Alex greeting me and said it is the new voice of 10.5, it sounds very natural with the exactly right rate, pitch and volume.
    But when I later try to go into the voice over set up menu to get the exactly sound as my default setting, I can't reproduce the same sound quality... can anyone know how to fix this?
    thanks in advance!!

    I did. Their technical team knows very little about iPhones, and tried to refer me to the local Israeli dealer (iDigital) which doesn't support iphones at all, so I'm kind of stuck.
    I found a few posts on the Interenet talking about using *5005*86 to program the iPhone's modem through them, but I couldn't figure what to type exactly to make it work...
    http://code.google.com/p/iphone-elite/wiki/iPhoneCodes
    Anyways, thanks for the help.
    B

  • How do I delete voice mail from my iphone 4s?  I am getting a message that my voicemail is 98% full.

    How do I delete voice mail from my iphone 4s? I keep getting a message that my voicemail is 98% full.

    i realised i have this 200mb of messages this morning & tried deleting my messages but it started to hang half way and my phone gets very hot. thn i do pressed my lock & home button to reset the phone, thn it cool atfer awhile but i got all my messges back lol..
    thn i found out, after deleting all the unwanted messages, sync to itunes, thn all the messages is gone for good. hope it helps?

  • I am trying to simulate the robot voice synthesizer sound that is produced by that electronic voice simulator after someone as had their voice box removed.   The vocal transformer insert in Logic Pro doesn't quite do it.   Suggestions?

    I am trying to simulate the robot voice synthesizer sound that is produced by that electronic voice simulator after someone as had their voice box removed.   The vocal transformer insert in Logic Pro doesn't quite do it.   Any Suggestions?

    Try one of the Audio Voice Effects like Alien / Cosmic / Robot… etc. to start with…
    Adjust the Settings in the Inspector to your liking…

  • The voice that was on when I first set up my ipad came back on and now I have to double click to get into my apps and can't use my apps because her voice is always talking.  How do I make her voice go away and my IPAD work like it should.

    The voice that was on when I first set up my ipad came back on and now I have to double click to get into my apps and can't use my apps because her voice is talking.  How do I make the voice stop and my IPAD work again. 

    If you've turned VoiceOver on then see if triple-clicking the home button turns it off, and then change what Settings > General > Accessibility > Triple-Click Home is set to.
    Otherwise, via 'the touch to select double-tap to activate' process you need to go into Settings > General > Accessibility > VoiceOver and turn it off
    The manual (http://support.apple.com/manuals/#ipad) also says that you should be able to switch voice-over off by connecting to your computer's iTunes :
    Turn VoiceOver on or off in iTunes: Select iPad in the iTunes sidebar. In the Options section of the Summary pane, click Configure Universal Access. Select VoiceOver, then click OK.
    So select Configure Universal Access at the bottom of the Summary tab and set Seeing to Neither

  • How do I get rid of a voice that speaks everything you are touching.

    How do I get rid of voice that speaks everything you are touching?

    Check: Settings - General - Accessibility - VoiceOver = Off.
    Please note you will need to use 3 fingers to scroll to various menu items.

  • HT1551 How do I get rid of the audio voice that announces everything?

    How do I get rid of that auto voice that announces everything?

    Settings>General>Accessibility>Voice Over
    AC

  • How do I stop a sound file that is playing while Firefox is open that sounds like a PacMan Game?

    How do I stop a sound file that is playing while Firefox is open that sounds like a PacMan Game? It started when I downloaded the current Adobe DLM, but continues when disable. It begins playing each time I open FireFox, but gets interferred with when opening a web page.
    == This happened ==
    Every time Firefox opened
    == 1520 hours, Central Time

    See [[Firefox makes random sounds]]

  • I just installed Apple TV...how can I turn off the "voice" that reads everything to me on the menu?

    I Just installed Apple TV....it works great but I want to turn off the "voice" That reads all the menu items to me. How do I do that?

    Settings>General>Accessibility>Voice Over change to off.
    PJRS

  • A black box keeps popping up on my screen with a voice that describes what I'm a doing. How do I get rid of it? I have no idea how it got here.

    BSD
    I've never had this before and I don't know how it happened.
    Everywhere I type there is a moving black text box. As well on the computer screen there is a black box with text that describes exactly what i am doing and a voice that reads it out.
    Extremely annoying. How do I get rid of it???

    Turn off VoiceOver in the Universal Access or Accessibility pane of System Preferences.
    (94078)

  • How do I get website backround sound to play when I go to that site?

    New to Firefox. Installed version 3.6.
    How do I get the background sound to play when I go to a web site that has background sound/music?

    If a website uses bgsound then it will only work in IE.<br />
    Bgsound is not compatible with other browsers like Firefox.
    * http://kb.mozillazine.org/Background_music_does_not_play
    See:
    *http://allwebco-templates.com/support/S_script_music.htm

  • How can i turn off the annoying voice that is there whenever you enter a command

    How can I turn off the annoying voice that is there whenever you enter a command.

    Settings > General > Accessibility > VoiceOver > Off

  • When I was setting up the language Setting, I pressed the play/pause button three times and now the voice that talks you through everything speaks extremely fast. How do I get her to speak slower?

    When I was setting up the language Setting, I pressed the play/pause button three times and now the voice that talks you through everything speaks extremely fast. How do I get her to speak slower?

    Hi Magsrobby,
    Welcome to the forum and thanks for posting. I'm really sorry to hear you've had so many problems. I can look into this for you if you wish. Drop me an email with the details. You'll find the "contact us" form in the about me section of my profile. Once I have the details we'll take it from there.
    Cheers
    David
    BTCare Community Mod
    If we have asked you to email us with your details, please make sure you are logged in to the forum, otherwise you will not be able to see our ‘Contact Us’ link within our profiles.
    We are sorry but we are unable to deal with service/account queries via the private message(PM) function so please don't PM your account info, we need to deal with this via our email account :-)

Maybe you are looking for

  • No SDO Communication Using CAN over EtherCAT (CoE) with 3rd Party Slave

    Dear all We are trying to establish an EtherCAT communication between a cRIO 9024 as EtherCAT master with a 3rd party frequency comverter (bmaxx 4432) as EtherCAT slave. CanOPEN over EtherCAT is industry standard. The slave device has a CAN in Automa

  • 100% reduction in standby power for DVR, etc. Who do I contact?

    Our company is CSI Assoc. (we perform direct certification assistance and product homologation type approvals for electronics and telecommunications products). One of our strategic business partners has invented a circuit chip. It will eliminate the

  • Problems with servlet filters

    Hello, I'm trying to implement filters for some of the examples presented in the j2ee tutorial. Thus, I've realized a very simple filter that works very well for the Converter example (mapped to the index.jsp URL). But this filter doesn't work with t

  • Replacement of com.sap.aii.messaging.lang.Binary;  in PI7.11

    Hi, After upgrade to PI7.11 from XI3.0,I am trying to adapt an adapter module which uses following import statement: import com.sap.aii.messaging.lang.Binary; But I am not able to find the equivalent in PI7.11. Can anyone please let me know. Thanks.

  • Deleting multiple messages in X6

    how can i delete multiple msgs on the X6 at one go? say if i have 50 msgs and i need to delete 20 together. there is only an option to mark all msg or mark each msg separately!