How to encode FCP files to Windows Media files by using Discreet Cleaner?

Do you know how to encode from FCP to Windows Media files in Discreet Cleaner 6.0?
Which is the right settings?
I got errors when I tries
In beforehand thank you very much for your answer

Hello Mikey
I have put up the following in the settings in Cleaner 6.0.1:
SETTING
Windows Media
OUTPUT:
Windows media
TRACKS:
Video media will be encoded into the output file
IMAGE:
- crop: manual
- image size: 320x240
- constrain aspect ratio: 4:3
- deinterlace: auto
Sharpen: radius: 1.5, amount: 50
Adaptive noise reducwe: mild
ADJUST:
- Gamma: 15
- Brightness: -5
- Contrast: 5
ENCODE:
- Windows Media Video V7
- Frame rate: 24 fps
- Insert Key frames: every 300 frames
- Video data rate: limit to 400 kbits/sec
AUDIO:
- Sample rate: 44.100 kHz
- Data rate: 48.0 kbits/sec
- Channels: stereo
BATCH> set default destination- her har jeg valgt en folder på harddisk
STATUS
- "Ready"
PLAY
I get the following message after to played:
"You need to clear the status and/or change settings for the media to begin encoding"
What is wrong with the settings or status?
Kind regards
mary Ann

Similar Messages

  • Converting a FCP sequence to Windows Media File - please help!

    Hi fellow mac users, please help if you can would mean the world to me! I'm trying to export an edited sequence (32mins in length) from FCP 5 using Quicktime conversion to a Windows Media File. Although I'm able to launch the process successfully, it just seems to convert the very first minute or two and not the entire thing! I'm not well versed in these technical issues, so have no clue how to figure this out. I've even tried in vain to compress the sequence first, import into FCP and then try to export as WM but no luck. My boss is away and client is pushing and I'm stressing!
    So if you can help, that would be fantastic!
    many thanks in advance.

    Cleaner and Sorenson are huge and complex transcoders. You just need time and a credit card to download and then lots of time to experiment and figure out the quirks of each application. You do not have this time. Telestream offers a competitor called Episode. it's cool.
    Get the full version of telestream's flip4Mac (if it was installed properly you can do this with a click on the system prerf panel for flip4mac). You will need a credit card. Be prepared for a very long transcode to WMP, even on a big Macintosh. I don't think you have the time for any of this nonsense.
    http://www.flip4mac.com/
    bogiesan
    Message was edited by: David Bogie Chq-1

  • How do I export into a windows media file ?

    I've been working on a project that requires both a quicktime and a windows media ( and /or real player) file to be made, so as to post on a website. I've got the quicktime file made, but what do I choose for a windows media file? - what options should I choose in export to make this happen?
    I'm on FCP 5.1
    and am using quicktime 7
    thanks!

    You need Flip4mac (the studio version ~$49US) to export windows media.
    It does a great job.
    good luck.
    x
    society of the dilletanti   Mac OS X (10.4.5)   T plus three and counting ...

  • Quicktime.mov file to Windows media file?

    Question what is the best settings to convert a Quicktime.mov file (40mb) done in HD 1080i wide formate to a windows media file so I can send in an email for review. I use FCE 3.5.1 apple G5 computer, I'm not sure of the settings in FCE for output to compres the file, I know it won't look very good it is just for a review of content
    Regards
    Merlote

    The settings will depend in part on how small you need to get the file. And exactly what format you want to use. Are you talking Windows Media literally (wmv) or just something that will open on a windows machine (such as mp4)

  • Converting Wav File to Windows Media File

    Hi
    Ive created some audio files that i would like to convert into Windows Media Files, is there any way of doing this in Logic 7
    Ive converted to MP3 successfully but cant find a way of converting to wma??
    Any Help gratefully received
    Jonny Spall

    You may want to look into WMV Studio Pro HD (but only God knows why you want this format).
    http://www.flip4mac.com
    jord

  • How to render and save a file as windows media file or mp3?

    I have worked in Sony Vegas 9 and I was hoping Adobe Premier Pro CC was similar--- but its not. I can't figure out how to render and save a file as a windows media or mp3 or in any format for that matter.

    Search for exporting in the help file
    Not all for PProCC, but The PPro/Encore tutorial list in message #3 http://forums.adobe.com/message/2276578 may also help, with more help in message #5
    PS - rendering is the process of creating temporary files to aid in timeline playback, while exporting creates new files

  • Windows Media file write failure

    Help, I'm using a Gateway computer with Windows XP Professional OS, version 2002 and Service Pack3. It has Intel Core CPU, 6600 @ 2.40GHz, 2.41 GHz, 2.00 GB of RAM. I have both Premiere Pro CS3 and CS4 installed. There's 54.1 GB of free space on my Hard Drive with 94.9 GB used.
    I used to create .wmv files without issue with CS3 but with CS4 there's a failure every time. The project exports to Media Encoder and Encoder goes through all of the process and even looks like it finishes up. But once it gets to the end, here's the message I get.
    Windows Delayed Write Failed
    Windows was unable to save all the Data for (my file) The Data has been lost. This error may be caused by a failure of your computer hardware or network connection. Please try to save file elsewhere.
    It also had this message in separate window:
    Adobe Media Encoder Debug Event
    Adobe Media Encoder has encountered an error.
    [..\..\src\Batch.cpp-186]
    I tried changing all of the variables I could in the Media Encoder for creating a Windows Media File. For ex. you can choose several presets: "NTSC source to high quality download" "NTSC Source to Download 1024kbps " and several others. I haven't tried changing anything on the Filters, Audiences, Video, Audio or Others tabs. I never had to with CS3. Plus I don't know much about the Codec for Video or Audio.
    Any help is appreciated.

    Rick,
    WMV is a very intense CODEC to work with. It requires power and time on either end - decoding or encoding. My guess would be that the throughput of the USB 2.0 connection just cannot keep up with that processing, where many other formats/CODEC's are easier to work with.
    As for the minimum requirements, we find that they are horribly light. To lift from Monty Python, "we blow our noses in their general direction." They are provided to tell a user what it takes to install and launch the program, but when it comes to using said program - well, that is usually another matter.
    If you have a desktop, and it has room in the case, you can most likely just add two more (2x is about the true min., and 3x is better) physical HDD's, of the controller type as your C:\. Depending on the MoBo, you probably have a SATA controller, and could add up to 3 additional drives, for basically the price of the drive, some cables, if not supplied, and a few screws. Most cases have the necessary mounting, or cages, for additional drives. Note the words "most," "probably," etc., as nothing in the PC world is created equal.
    Were I making the request, I'd propose adding 2 more HDD's, at 7200 RPM and of the same controller type as your C:\. I'd ask for a minimum size of 500GB, but shoot for 1TB for each. Do not know if you have a Fry's Electronics near you (they are a Western US retailer), but they constantly have at least one such HDD on sale per week, and at very good prices.
    Ignore SCSI. It's good and fast, but the drives are limited in size and the $/GB is not high. A RAID 0 array would be good for the media drive (actually it would be 2 HDD's), but to really benefit, one would do best with a hardware managed RAID, and most RAID controllers on MoBo's leave something to be desired. Harm makes recommendations for dedicated hardware RAID, but then you are talking having to do a real "dog & pony" show for you CFO, or Controller!
    Maybe Harm has some suggestions, considering that you are on a city's budget.
    Good luck, and glad that things are working for you. Think about relegating that USB 2.0 external to archiving Assets.
    Hunt

  • I have converted most of my windows media files to itunes. However I had to close it down about 3 quarters of the way through. It then processed the album art. How can I convert the files that it didn't finish doing the first time? thanks

    Hi there,
    hope you can help me. I helped my sister convert her window media files to itunes and set up an account for her. Unfortunately her computer is really slow and it was really late and we had to turn it off. It processed some of the album art for the files that it had converted. However, some songs were not converted and because there was quite a few left, I don't really know which ones did not get converted as I selected  all of the folders. How do I find out which ones I have left to convert and put the rest of the songs onto itunes for her please? Or are they on the itunes still as they showed up initially on itunes in the list to be converted.
    Thank you!

    You could convert them all again and then dedupe, or use a Windows search to reveal all the WMA files and then try to work out which still need to be converted. If you're lucky iTunes would have processed the imports in alphabetical path order so it would just be a matter of working out where it had got up to...
    tt2

  • How to convert WMA files (from Windows Media Player) to play in iTunes

    How do I convert WMA files (from Windows Media Player) to now play in iTunes?

    Use Edit > Preferences > General tab > Import Settings to set your desired import format and bitrate. Note there is no point converting 128k wma into 320k mp3, you'll just get bigger files with no improvement in quality. Once you have set your import settings just drag & drop the files you want converted into iTunes.
    tt2

  • How to play MOV files inside Windows Media Center Edition

    I've installed QT Pro, but am not able to play MOV files inside Windows Media Center Edition (MCE). Under "My Videos" from the MCE main interface, I can see the files, but once selected, error message indicates unknown/unplayable file type.
    How do I get my MOV files to play inside Windows MCE??
    Marc

    Quote from: cosmosk on 05-April-05, 22:29:47
    I don't use MSI's MC application so I can't directly answer your question.
    However both Win DVD 6 and PowerDVD6 play them just fine by launching the ts.ifo file.
    Yes, I know that, but that means that I should use at least two applications. I need only one front end to launch all my media files, inluding ripped DVD files, not as separate VOBs but as whole movies decribed in IFO files.
    Kiero

  • Help with encoding windows media file

    Hello, I have recently stared using After effects to edit some movies.  Basically I am importing some .wmv videos (with sound), adding some visual effects to them and and want to export them just like they were but with the effects.  After that I will then want to copy the videos to an external hard drive and be able to connect it to a Sony blu ray player and watch them on the tv.  The entire process works fine with the videos before all the editing happens.  But something happens to the audio.  It plays fine on the PC but when I play it through the blu ray player, there is no sound and it says it is"this audio type is not supported."
    My best guess is that it looks like AE wants to encode the audio with Windows Media Audio 10 Professional by default and it's possible that the bluray player can't play that. Does this sound right to you?
    I know you can choose Windows Media Audio 9 and 9.2. for the output but 9 played back in slow motion sound and I'm currently waiting for 9.2 to export.
    Any advice for using another codec like AVI or FLV?  Or maybe something else?
    Thanks so much for any help!!!!
    Cheers,
    Aaron

    I suggest exporting your files through Adobe Media Encoder (AME). It has Blu-ray encoding presets, as well as handling WMV encoding better than After Effects.
    Here is the AME forum:
    https://forums.adobe.com/community/ame

  • How to convert windows media file to QT?

    Quality issues aside, I have been given a windows media file to put on DVD. What program can convert it to QT so I can bring it in to FCP?
    Regards to all.

    flip4mac wmv components
    http://www.flip4mac.com/wmv.htm

  • Importing Windows Media file into FCP

    I have a Windows Media file, that I want to put into FCP for later export to DVD.
    QuickTime cannot open the file, nor can Cleaner. Windows Media Player for Mac plays the file fine, but there are no export options.
    Any ideas? Help greatly appreciated.

    Did some Googling and just a minute ago I downloaded the software.
    Looks like it's working. Exporting the file to QuickTime DV now.
    Thanks for your help!

  • How to play .wma and other Windows Media Player-format files/videos on Mac?

    Hi again,
    I will be asking stupid questions as I'm a newbie to Mac, so please bear with me. There are some video format that QuickTime player doesn't play e.g. .wma files. I tried a couple of times to download Windows Media Player for Mac but it doesn't install on my Mac! Do I require a software similar to Zipfile or does Mac has it all build in?
    PS - What is the coequal of "delete" button here in Mac (keyboard)?

    Download and install Flip4Mac - VersionTracker or MacUpdate - to play Windows Media files via Quicktime. Also get Perian to provide additional codecs for other video formats.
    The Delete key is on the keyboard next to the "=" key.

  • How to control the speed of video file in Window media player

    Hello
        I had worked on LabView for a week & i am new to LabView.i am working on Labview 8.5 and i want to control the speed of video file in windows media player on front panel.
    Is it possible?and if yes send me some examples for this & steps to do this.
    Thank You.

    few minutes back only i posted a reply to similar question here

Maybe you are looking for