How to encrypt the document number in URL
Hi All,
I am working on a project where I need to send a URL to the user in his email, the URL contains the document number in it. when the user clicks on that URL a webdynpro application will open with data prepopulated based on the document number, now what I want his how can encrypt the document number in the URL when sending it to the user. so basically the user who gets the URL should not be able to see the document number in the URL.
Please advise.
Thanks,
Rajat Garg
Thanks again for the reply and now I am able to encrypt and decrypt my document number... one more question please : will it be possible to chnage the whole URL to some basic message type URL for eg:
let's say our URL is "http://testdoc/post?mssg" and I want to change this to as "OPEN DOCUMENT" and when user clicks on ""OPEN DOCUMENT" it will still direct to the original destination that is our original URL.
I have been told that we don;t want to maintain custom table until and unless it's our last choice.
Thanks,
Rajat
Similar Messages
-
How to get the document number for a ware house order.
Hello gurus,
how to get the document number for a ware house order. [if GI is posted refering that WH order] .. is there any report?
Thanks in advanceThere are several options. When you post a Goods Movement, you can use LB12 -display Transfer Requirement for material document or LB11 Display TR for material.
Depending on how your system is set up you may have gotten a Transfer Order automcatically. In this case you can look at LT24 - Transfer Order for material. -
How to include the document number in SM20 or SLG1 ?
Hi every one ,
i want to dispaly the actions made by the user so i sed transaction SM20 and SLG1 but they doesn't display the Document number created by the user ..
How can i include the document number in e result of SM20 and SLG1 ?
Thanks in advanceI have to configure SM19 first then SM20
THanks -
How to find the document number generated by F-53 Tcode.
Hi expert,
I am using user exit EXIT_XFMPR1_001, at this point I want to export document number, vendor number , vendor name, Vendor address, invoice number, invoice date, invoice amount, WHT, and net amount.
I get these, than I will transport it into text format file.
Thanks
Syed Tayab ShahHi,
What is ur requirement? why do you need to download/transfer to txt format?
Still want to do it? then try INDX table to export your contect.
And then read the table later...
If the hint is usefulu2026 Say thanks by rewardu2026.
Regards,
Prabhu Rajesh -
How to get/view document number for KP06 Planning upload
Hi,
I have uploaded excel for Cost center/cost element Planning in KP06 using exccel planning.Now i want the document number which for which i have posted in KP06-Plan values using excel upload.
Kindly advice me how to get the document number for CO-OM(Cost center/Cost element planning) in KP06?
Thanks
SupriyaHello,
Please execute report KSBL. It should be useful.
Regards,
Ravi -
How to hide the PORT NUMBER from the URL
Hi,
We have Application on Node 1 and Database on Node 2
Apps Version: 11.5.10.2
DB: 9.2.0.6
We recently added a new node to act as web server for iSupport.
Now we are able to access the url using public Ip-address which looks like
http://<Internet Ip-Address>:<PORT NUMBER>
Eg: http://******.com:8000
But we dont want the *'PORT NUMBER(8000)'* to be displayed.
How to hide the port number ?..
Thanks in Advance,
MaheshHi Hsawwan,
Can you plz explain me the steps how to hide the port number from the url as our network administrator is not aware of this.
Regards,
Mahesh -
How to do Check in the files for the document number?
Hi ,
By using BAPI_DOCUMENT_CHECKIN2 Function module I am uploading the Files for the Document number.
My problem is - After uploading the files to the document number the files are not in check in status.
I want the files to be checked in after uploading the from the FM.
Can anyone tell me what I am missing ? How to do check in the files.
I am passing the following values to FM.
ls_files-SOURCEDATACARRIER = ls_file-DATA_CARRIER.
ls_files-WSAPPLICATION = ls_file-application.
ls_files-DESCRIPTION = ls_file-file_desc.
ls_files-STORAGECATEGORY = ls_file-category.
ls_files-DOCFILE = ls_file-doc_path.
ls_files-CHECKEDIN = 'X'.
CALL FUNCTION 'BAPI_DOCUMENT_CHECKIN2'
EXPORTING
DOCUMENTTYPE = ls_file_data-dokar
DOCUMENTNUMBER = ls_file_data-doknr
DOCUMENTPART = ls_file_data-doktl
DOCUMENTVERSION = ls_file_data-dokvr
IMPORTING
RETURN = ls_return
TABLES
DOCUMENTFILES = lt_files
COMPONENTS =
DOCUMENTSTRUCTURE =
I appriciate you response on this.
Thanks in advance.Any answers for this?
Thanks. -
How to get the Page Number in CS3 with VB?
Hi, Everybody
I use the Visual Basic to read the words and their page number where the Words are at. I want to do it according to Story. Some TextFrame of the Story waw placed in other pages: How can I get the Page number according to the Word that is selected?
For myStoryCounter = 1 to Document.Stories.Count
Set myStory = Document.Stories.Item(myStoryCounter)
For myWordCounter = 1 to myStory.Words.Count
Set myWord = myStory.Words.Item(myWordCounter)
myWordContents = myWord.Contents
Rem ** How to Get the Page Number according to the Word ***
Next
Next> But I don't understand why Item(1) are set.
because Word can have more than one parent TextFrame - when split across TextFrames
only Character have one ParentTextFrame accessed also by ParentTextFrames.Item(1)
> why Story.TextFrames.Count alway is 0, Is it bug?
no - it's not bug
in older IDs - Story.TextFrames collection refer to all TextFrames as containers for Story text
but in CS3 - collection Story.TextFrames contain all TextFrames inserted as InLine/Anchored objects - same like Story.Rectangles or Story.Ovals
in CS3 - when you want to refer to TextFrames as containers for Story text - you need to use Story.TextContainers - because now you can link TextFrame and Text-On-Path as Story - Text-On-Path isn't TextFrame
robin
www.adobescripts.com -
How to reverse the Batch number which was enter wrongly during GRN posting
Hi Folk,
How to reverse the Batch number which was enter wrongly during GRN posting .
Please revert.
Thank you.You can either do a transfer posting and move quantity from this batch to another batch e.g. in MB1B with movement 311, or you cancel the entire material document using MBST transaction and redo your receipt correctly.
Then you can flag the wrong batch for deletion in MSC2N.
The batch itself gets deleted physically with the archiving transaction SARA object MM_SPSTOCK -
How to get the delivery number for the sales order
hi
how to get the delivery number for the sales orderHi,
1. IN VA03, enter the sales order and click on the document flow button. From there you can check the delivery document.
2. In SE11, enter VBFA(Document flow) table and enter the sales order in VBELV field and in VBTYP_N field enter 'J' to specify that you want to check if there is already a delivery document for that sales order.
Hope it helps...
P.S. Please award points if it helps... -
FM module not returning the document number
Hi all,
I am using FM PRELIMINARY_POSTING_FB01 to park a document, it's working perfectly fine and I am able to park the document as well but at the end of the FM it's not returning me the document number, so can you please tell me how can I get the document number which I parked using this FM at the end of the program.
Thanks,
Rajat GargHi, Can you please expalin a little more, This is what I am passing:
call function 'PRELIMINARY_POSTING_FB01'
exporting
i_tcode = 'FV60'
I_XCMPL = 'X'
I_TCODE_INT = 'FV60'
IMPORTING xepbbp = l_xepbbp
tables
t_bkpf = lt_bkpf
t_bseg = lt_bseg
t_bsec = lt_bsec
t_bset = lt_bset
t_bsez = lt_bsez
exceptions
error_message = 1.
p_return-id = sy-msgid.
p_return-type = sy-msgty.
p_return-number = sy-msgno. -
How to control Held documents number ranges
Hi Gurus.,
pls tell me How to control Held documents number ranges.,
its urgent .one of my client asking separate number ranges for held documents
with regards
rameshDude,
I understand you are refering Hold Document not Park document. Becoz Park document use the same number range which is used for normal document posting. However, for Hold Document Number ranges, i advice you to liaise with your Abaper for BADI/Exit/ or etc etc.....for maintaing a specific number range or validation of number given.
pls assign point if useful -
How to get Accounting document number from billing document number
Hi,
How to get Accounting document number from billing document number i.e. from VBAK- VBELN.
Cheta PantHi,
VBAK is the Sale Order header table, Billing document table is VBRK.
Sales tables (VBAK,VBAP,VBRP,VBRK) do not store accounting document numbers.
You do other way around. Just go to SE16 and enter the Billing document number in field Billing document VBELN in BSEG or BSID or BSAD table and execute, you will find the accounting document number.
If you just want collect this information once then you can use table BSEG, but if you think to develope a report then use table BSID and BSAD.
Regards,
Chintan Joshi -
How to delete the Request Number
Hi all,
How to delete the Requset Number in Development Client.Already i transported this Req. Number to Tesing Client.For what purpose, deleting the request number won't restore your dev system. You can remove the request from the import queues via transaction STMS to insure it will not be accidentally imported.
You can usually only destroy a request in source system if it has not been released and all objects are unlocked, but this is risky in some cases and may cause a loss of information or coherence.
Regards -
How to encrypt the text in password field in Oracle Forms version 6i
Need help!
How to encrypt the text in password field in Oracle Forms version 6i?
one way is to change the settings in the property palette. Can somebody provide me some script to be run while the form is running which will enable the password to be encrypted?
Thanks!Hello,
Do you mean "hidden" (replaced with stars) or encrypted (that needs to be decrypted ?
Francois
Maybe you are looking for
-
Spotlight constantly indexing in a never ending loop
I've upgraded my older Aluminium iMac Early 2008 model from Tiger to Snow Leopard to Lion and then Mountain Lion. Since Mountain Lion, I've been having indexing problems. The mds process just doesn't want to stop. I have tried all the solutions. Turn
-
Hi , I am getting the following problem in my FAST ESP 5.3 , after recently updating the new Index profile. It was a Hot Update. Have already reset the index, but still this message keeps coming every 6 hrs. Please suggest. Its a 2 node setup with 5
-
How to know the which week in GregorianCalendar API
Dear all does someone know that way when i use GregorianCalendar this API to know the which week is for example in this month has 6 week and 2008/08/27 is week 5 , dose any idea i can know it in this program import java.util.Calendar; import java.uti
-
[ANN] Run Forms and Reports on the Web for $5,000
A new time limited price promotion for customers looking to upgrade Oracle Forms to the Web is now offered. Get a restricted license to use Oracle9iAS Forms Services and Oracle9iAS Reports Services only for $5,000 per CPU (or $100 per named user). Or
-
Adapters for Salesforce Integration
Hi All, I am working on Integrating Salesforce with legacy applications, and looking for some adapters by which I can establish a communication channel between SOA and Salesforce. Are there any Salesforce adapters available from oracle or Third party