How to encrypt the text in password field in Oracle Forms version 6i

Need help!
How to encrypt the text in password field in Oracle Forms version 6i?
one way is to change the settings in the property palette. Can somebody provide me some script to be run while the form is running which will enable the password to be encrypted?
Thanks!

Hello,
Do you mean "hidden" (replaced with stars) or encrypted (that needs to be decrypted ?
Francois

Similar Messages

  • HOw to  find the text for PERSK field in infotype 0001

    hi all
    HOw to  find the text for PERSK field in infotype 0001

    Hi
    T503T : contained the similar informative text for PERSK . read this for T503T-PTEXT.
    ..lakhan

  • How to  adjust the text in input field

    Hi Expert,
    New in VC development. Can someone guide how to adjust the text in input field? Because of  long text length it  is not displaying fully in visual composer iView so user are not able to see the entire text in input fields

    HI Kundan,
    I assume that you have already tried different options perent in Label Postion for the field.
    If none of these options meet your requirement then you can try the following workaround:
    In the display properties, select label position as no label.
    In the form view add a new UI Control for Plain Text or HTML text and change its Label to "Material Number".
    Now place this new UI Control in before your actual Input field such that it appears as the field label.
    Hope this helps.
    Regards,
    Rk

  • How to change the text of a field in organisational assignment.

    hi gurus,
    how to change the text of field MSTBR (super visor) to a differnt name in info type pa0001.
    i have changed the field name in cmod , changed name appears in table.but it is not appearing in the info type screen 0001.
    how to resolve this pls help me..

    hi,
    The Field showing in the infotype 1 is FORPR.
    Change the text of this Field in CMOD.
    CMOD ->Go to ->tect Enhancements->keywords-> Change ->FORPR
    Change the text and check again.
    Regards,
    Manoj.

  • How to increase the width of a field in oracle reports 6i

    Hello,
    I'm facing a problem related to width of field. I have a table with field abc varchar2(1500) and when I try to show it in report. I'm unable to see complete data because field size in report is 300.
    Kindly guide me to increase the size/width of field in oracle report 6i
    thanks in advance
    sadiq

    Post your question on Reports forum
    Reports

  • How to use the userid and password infor from Oracle DB in BO

    Out client has the userid and passwords(encrypted) infomration stored in oracle table.
    Is it possible to import this useid and password information into BO .And use the same userid and password from Oracle table for its login authentication and for data security...?
    In other words can the userid/pwd info from Oracle Profile Table imported and re-used in BO Enterprise Edition.

    If the users/pw are in an Oracle LDAP v3 compliant server then you can import them via LDAP plugin, else you would need to bring them in an enterprise users via script. The Import wizard can do this and the SDK (see the SDK forums for more info on how)
    Maintaining the passwords would be difficult unless you are using and industry standard directory like LDAP.
    Regards,
    Tim

  • How to display the report output from a customized Oracle Form button

    Hi Gurus
    I developed a customized oracle form and one customized report. I want to run report from oracle customized form, for this i use one button to submit concurrent request for request.
    its successfully submitted and i can view output by using View ----> Request --------> Find -------------> Output...
    But problem is that how can i view output by using button not doing all steps to view output.
    Regards,

    Hi Haq Nawaz,
    Refer Here
    Regrads,
    Guru

  • How to validate a text item/display item in Oracle forms 9i?

    Hello Everyone,
    I have a form in which we have to type in a product_id as shown below in the screenshot. And when we type in, it has to get validated.
    If it is valid then ok, else display a message saying not valid.
    How do we achieve it on a text box/diaply item in the form shown below.
    Any kind of help would be really appreciated.
    Thanks in advance,
    Vishal

    Just create a when-validate-item trigger for that text item and write the code inside to validate it.
    Hope it helps.
    Navnit

  • How to display the report output from a standard Oracle Form

    Dear Members,
    I am calling a concurrent program (XML Report) from a standard form using form's personalization (special menu entry).
    I am able to successfully submit the concurrent program. Once it is submitted successfully user need to navigate to the Requests window to see the output.
    Instead of user navigating to the requests window to see the output, can we display it directly on the standard form itself after the completion of the report?
    Many thanks in advance.
    Best Regards,
    Arun Reddy.

    R4S,
    You might be able to Zoom to the view requests form to save your users a step.
    HTH,
    --Johnnie                                                                                                                                                                                                               

  • How to customize the applet's status bar in Oracle Forms 9i

    I extended the statusBar class to include our own message in the applet's status bar. Using JDeveloper I compiled the class and jared the class file. Eventhough I placed that jar file in the classpath, it is not shown in the "import java classes" dialog box.Could anyone help me. Thanks in advance.

    Hi,
    it needs to be in the path configured in the Forms_Builder_Classpath registry variable.
    Frank

  • Question on how to Hide the User Name, Password, and Domain fields in the MDT Wizard

    MDT 2012 U1
    Deploying Windows 7 via Offline Media (ISO) to MS Virtual PC's
    I am looking on how to Hide the User Name, Password, and Domain fields which are prepopulated in the MDT wizard via the CS.ini (Not so concerned about the Domain field as I am User Name and Password)
    We do need the Computer Name and OU fields to be seen, so skipping the wizard is not a option
    The client just does not want these fields to be seen by the end users, they dont want them to even know the account name used for adding the machine to the domain, of course the password is not displayed but it must not be displayed either.
    But since we use the fields they must still  be fuctional just not seen.
    Thanks.....
    If this post is helpful please click "Mark for answer", thanks! Kind regards

    You shouldn't have to edit DeployWiz_Definition_ENU.xml. You should only need to add "SkipAdminPassword=YES" to the CS.ini file and your authentication information.
    Example:
    [Settings]
    Priority=Default
    Properties=MyCustomProperty
    [Default]
    OSInstall=Y
    SkipCapture=NO
    SkipAdminPassword=YES
    UserID=<MyUserID>
    UserPassword=<MyPassword>
    UserDomain=<MyDomain.com>
    SkipProductKey=NO
    SkipComputerBackup=YES
    SkipBitLocker=NO
    -Nick O.
    Nick,
    SkipAdminPassword=YES is for:
    You can skip the Administrator Password wizard page by using this property in the
    customsettings.ini.
    I am hidding the Username/Password/and domain field in the computer name Wizard pane which is read from the cs.iniDomainAdmin=xxxxx
    DomainAdminPassword=xxxxx
    DomainAdminDomain=xxxxxx
    JoinDomain=xxxxxx
    If this post is helpful please click "Mark for answer", thanks! Kind regards

  • How to change the text of a user defined field in dynamic selections?

    Logical Database PSJ is used by t code CJI3 - we added a couple of user fields into the dynamic selections of CJI3.
    Now - how to change the text of this user filed (USR01 of structure PRSP_R in logical database PSJ)?
    Found an OSS note - 86980 - that tells that this is not possible.
    But when we read the documentation on the user field (CJI3 - dynamic selections  - double click on user field - F1), it shows the following text:
    User-defined field in which you can enter general information with a length of up to 20 characters.
    Dependencies
    The names (key words) for  user-defined fields depend on the field key.
    Now the question is where to change the field key..
    Thanks,
    Ven

    Madhu - you did not get the question I think.
    Anyways - I found an OSS note 1266643 - this code change should take care of the issue - it will then reflect the details maintained in custoizng at transaction code OPS1..
    Thanks,

  • How to populate the TEXT field in MIGO

    Hi folks,
    While creating material document in MIGO or MB01, i am inserting some data in TEXT ( Field in line item level ). This text data is disappearing , once mat doc is created.
    how to populate the TEXT field in MIGO?Is there any cusomisation?it's urgent .
    Regards
    pabi

    Hello Pabitra,
    I had a similar issue in my Project.
    Please verify if the SMOD enhancement MBCF0002 (EXIT_SAPMM07M_001) is active in your system.
    If this is the case, verify from two angles:
    a) Whether the Enhancement was accidentally activated - If yes, then De-activate the same
    b) If there is some logic coded in the User Exit, but, the Text is somehow not determined...even the existing content in the text field (input to EXIT_SAPMM07M_001) will get vanished.
    Hope that your problem will be resolved by this.  Pls reward points.
    With Regards
    Vijay Gajavalli

  • How to clear the text in the Text Editor

    Hi all,
    I created a Text editor and also i am having language field in the screen.
    whenever i change the language auomatically the text has to change when the text exists for that
    language.
    this is working fine, but when the Text exist , the text editor should be blank.
    But it is carrying the Previous editor text itself into it .
    How to clear the text in the Editor.
    Regards,
    Madhavi

    Hello Madhavi
    The simple report ZUS_SDN_TEXTEDIT_CONTROL shows how to switch the texteditor contents when changing the language.
    *& Report  ZUS_SDN_TEXTEDIT_CONTROL
    *& Thread: how to clear the text in the Text Editor
    *& <a class="jive_macro jive_macro_thread" href="" __jive_macro_name="thread" modifiedtitle="true" __default_attr="1145272"></a>
    *& By default the itab GT_OUTTAB contains texts in DE and EN.
    *& To switch the language directly enter into the command window:
    *& LANGU=DE, LANGU=EN or LANGU=FR
    REPORT  zus_sdn_textedit_control.
    TYPE-POOLS: abap.
    TYPES: ty_t_text     TYPE TABLE OF as4text
                         WITH DEFAULT KEY.
    TYPES: BEGIN OF ty_s_outtab.
    TYPES: language TYPE spras.
    TYPES: text     TYPE ty_t_text.
    TYPES: END OF ty_s_outtab.
    TYPES: ty_t_outtab    TYPE STANDARD TABLE OF ty_s_outtab
                          WITH DEFAULT KEY.
    DATA: gt_outtab       TYPE ty_t_outtab,
          gs_outtab       TYPE ty_s_outtab.
    DATA: gd_language     TYPE spras.
    DATA: go_docking      TYPE REF TO cl_gui_docking_container,
          go_textedit     TYPE REF TO cl_gui_textedit.
    DATA: gd_okcode       TYPE ui_func,
          gd_repid        TYPE syst-repid.
    START-OF-SELECTION.
      PERFORM fill_texts.
      gd_language = syst-langu.
      PERFORM init_controls.
    * Link the docking container to the target dynpro
      gd_repid  = syst-repid.
      CALL METHOD go_docking->link
        EXPORTING
          repid                       = gd_repid
          dynnr                       = '0100'
    *      CONTAINER                   =
        EXCEPTIONS
          OTHERS                      = 4.
      IF sy-subrc NE 0.
    *   MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
    *              WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
      ENDIF.
      PERFORM set_text_editor.
    * NOTE: dynpro does not contain any elements
      "       ok-code => GD_OKCODE
      CALL SCREEN '0100'.
    * Flow logic of dynpro (does not contain any dynpro elements):
    *PROCESS BEFORE OUTPUT.
    *  MODULE STATUS_0100.
    *PROCESS AFTER INPUT.
    *  MODULE USER_COMMAND_0100.
    END-OF-SELECTION.
    *&      Module  STATUS_0100  OUTPUT
    *       text
    MODULE status_0100 OUTPUT.
      SET PF-STATUS 'STATUS_0100'.  " contains push button "DETAIL"
    *  SET TITLEBAR 'xxx'.
    ENDMODULE.                 " STATUS_0100  OUTPUT
    *&      Module  USER_COMMAND_0100  INPUT
    *       text
    MODULE user_command_0100 INPUT.
      TRANSLATE gd_okcode TO UPPER CASE.
      CASE gd_okcode.
        WHEN 'BACK'  OR
             'EXIT'  OR
             'CANC'.
          SET SCREEN 0. LEAVE SCREEN.
        WHEN 'LANGU=DE' OR
             'LANGU=EN' OR
             'LANGU=FR'.
          PERFORM get_text_editor.
          SPLIT gd_okcode AT '=' INTO gd_okcode gd_language.
          PERFORM set_text_editor.
        WHEN OTHERS.
      ENDCASE.
      CLEAR: gd_okcode.
    ENDMODULE.                 " USER_COMMAND_0100  INPUT
    *&      Form  FILL_TEXTS
    *       text
    *  -->  p1        text
    *  <--  p2        text
    FORM fill_texts .
    * define local data
      DATA: ld_string   TYPE string.
      gs_outtab-language = 'EN'. REFRESH: gs_outtab-text.
      ld_string = 'Good morning'.
      APPEND ld_string TO gs_outtab-text.
      APPEND gs_outtab TO gt_outtab.
      gs_outtab-language = 'DE'. REFRESH: gs_outtab-text.
      ld_string = 'Guten Morgen'.
      APPEND ld_string TO gs_outtab-text.
      APPEND gs_outtab TO gt_outtab.
      gs_outtab-language = 'FR'. REFRESH: gs_outtab-text.
      ld_string = space.
      APPEND ld_string TO gs_outtab-text.
      APPEND gs_outtab TO gt_outtab.
    ENDFORM.                    " FILL_TEXTS
    *&      Form  INIT_CONTROLS
    *       text
    *  -->  p1        text
    *  <--  p2        text
    FORM init_controls .
      CREATE OBJECT go_docking
        EXPORTING
          parent                      = cl_gui_container=>screen0
    *      repid                       =
    *      dynnr                       =
    *      side                        = dock_at_left
    *      extension                   = 50
    *      style                       =
    *      lifetime                    = lifetime_default
    *      caption                     =
    *      metric                      = 0
          ratio                       = 90
    *      no_autodef_progid_dynnr     =
    *      name                        =
        EXCEPTIONS
          cntl_error                  = 1
          cntl_system_error           = 2
          create_error                = 3
          lifetime_error              = 4
          lifetime_dynpro_dynpro_link = 5
          OTHERS                      = 6.
      IF sy-subrc <> 0.
    *   MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
    *              WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
      ENDIF.
      CREATE OBJECT go_textedit
        EXPORTING
    *      max_number_chars       =
    *      style                  = 0
    *      wordwrap_mode          = wordwrap_at_windowborder
    *      wordwrap_position      = -1
    *      wordwrap_to_linebreak_mode = false
    *      filedrop_mode          = dropfile_event_off
          parent                 = go_docking
    *      lifetime               =
    *      name                   =
        EXCEPTIONS
          error_cntl_create      = 1
          error_cntl_init        = 2
          error_cntl_link        = 3
          error_dp_create        = 4
          gui_type_not_supported = 5
          OTHERS                 = 6.
      IF sy-subrc <> 0.
    *   MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
    *              WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
      ENDIF.
    ENDFORM.                    " INIT_CONTROLS
    *&      Form  SET_TEXT_EDITOR
    *       text
    *  -->  p1        text
    *  <--  p2        text
    FORM set_text_editor .
      BREAK-POINT.
      CLEAR: gs_outtab.
      READ TABLE gt_outtab INTO gs_outtab
           WITH KEY language = gd_language.
      CALL METHOD go_textedit->set_text_as_stream
        EXPORTING
          text            = gs_outtab-text
        EXCEPTIONS
          error_dp        = 1
          error_dp_create = 2
          OTHERS          = 3.
      IF sy-subrc <> 0.
    *   MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
    *              WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
      ENDIF.
    ENDFORM.                    " SET_TEXT_EDITOR
    *&      Form  GET_TEXT_EDITOR
    *       text
    *  -->  p1        text
    *  <--  p2        text
    FORM get_text_editor .
      CLEAR: gs_outtab.
      CALL METHOD go_textedit->get_text_as_stream
        EXPORTING
          only_when_modified     = cl_gui_textedit=>true
        IMPORTING
          text                   = gs_outtab-text
    *      is_modified            =
        EXCEPTIONS
          error_dp               = 1
          error_cntl_call_method = 2
          OTHERS                 = 3.
      IF sy-subrc <> 0.
    *   MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
    *              WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
      ENDIF.
      MODIFY gt_outtab FROM gs_outtab
        TRANSPORTING text
        WHERE ( language = gd_language ).
    ENDFORM.                    " GET_TEXT_EDITOR
    Regards
      Uwe

  • How to print the texts retrived by using READ_TEXT fun module in Smartform

    Please tell me how to print the text which is rertrived by using the READ_TEXT function module in smartform.
    I have coded all things in the program lines and in that i am retriveing the long texts.
    I am getting the text lines in my internal table clearly, the thing is that I am not able to pass these lines to the text.
    I have to print the trouble ticket. in that the notes log I have to pass.
    its urgent. Points will be rewarded for any type of clue. whether it will work or not.

    There are a few ways to do it. If you need to take all of the text in the text type, in your SF text element choose "Include Text".
    Populate the fields with the data that corresponds to the text type. It is similar to the interface to the FM "Read_Text.
    Text Name
    Text Obje
    Text ID 
    Language
    Encase any variables with the "&" symbol.
    If you have already coded the call to the FM "READ_TEXT" and loaded the text into an internal table, create a loop and loop through the itab. Inside of the loop create a text element and add a variable in the text element for the field you are looking to output.

Maybe you are looking for

  • Create sales order with ref to quotation - usage of line items not copied

    hi i have created a quotation for which the first line item(higher level item) is a configurable item for which the value of the field use (vbap-vkaus) is blank  and the line items the use field is given as  'HIDE DISCOUNT'. when i created a order wi

  • Best solution for customers to edit InDesign files within a browser????

    I have done a lot of research of some of the companies out there now that do this (one2edit, wealledit, chilli publishing, etc.) and none are really what we are looking for.  To begin, we are a publishing company that produces custom academic plannin

  • How i can fix the blue screen issus.

    Hello , i had iphone 5s , my i phone got blue screen and he always want me connect to itunes , when i did "update and backup" my iphone go to the loading screen and got blue screen ... i tried from another computer and i fixed the problem , i used my

  • Order of portal roles in navigation menu

    Hi portal experts, Do you know that how the portal chooses that in which order the roles are in the portal navigation menu/area? I have a role which I would like to always display as the last entry in the navigation area? So e.g. first I would have E

  • Why won't my iCloud sign in?

    After I properly use my Apple I.D. and password, I get this following message.. errorcom.apple,appleaccount.error.403 So, what does this mean and why is this keeping me from using the iCloud function of my phone? And of course, how do I resolve this