How to Encrypt USB on Mac?

Can you please tell me how to encrypt a USB? I ultumately want to encrypt my sd chip for my android, but thought that I should test it out on a USB first.

on a empty usb stick - once connected to your Macbook - open disk utility.
select your usb - then select which format encryption you want. do realize however, doing it this way, your usb will only work on any macbooks running lion or mountian lion.
if that's not what you want - then download a file encryption software that is compatible to what you want to use it for.

Similar Messages

I am trying to connect a Windows 7 / 64 bit to an Epson printer on my Mac. The printer is hooked into the Mac via USB; the Mac is networked to a Linksys wireless router with an ethernet cable, as is the Windows box. Any tips on how to do this?

I am trying to connect a Windows 7 / 64 bit to an Epson printer on my Mac. The printer is hooked into the Mac via USB; the Mac is networked to a Linksys wireless router with an ethernet cable, as is the Windows box. I installed the current Bonjour printer services software on the Windows machine, and separately installed the driver software for the Epson printer on the WIndows machine. Running the bonjour wizard, I get an alert saying 'I don't have sufficient access to my computer to connect to the selected printer'.
The printer has 'sharing' turned on from the Mac end; this works with a Powerbook via the wireless connection. Sharing is also turned on in the Windows printer control panel for this printer (under properties). The Mac is a G5 running 10.5.8. When I try to print a page from the Windows machine it gets hung in the print queue.
Any advice how to proceed would be appreciated!
thx,

I am trying to connect a Windows 7 / 64 bit to an Epson printer on my Mac. The printer is hooked into the Mac via USB; the Mac is networked to a Linksys wireless router with an ethernet cable, as is the Windows box. I installed the current Bonjour printer services software on the Windows machine, and separately installed the driver software for the Epson printer on the WIndows machine. Running the bonjour wizard, I get an alert saying 'I don't have sufficient access to my computer to connect to the selected printer'.
The printer has 'sharing' turned on from the Mac end; this works with a Powerbook via the wireless connection. Sharing is also turned on in the Windows printer control panel for this printer (under properties). The Mac is a G5 running 10.5.8. When I try to print a page from the Windows machine it gets hung in the print queue.
Any advice how to proceed would be appreciated!
thx,

I install windows 8 via boot camp but its corrept so i recover this by the bootable usb which is helping me to install windows 8 but in recovery my osx is formatted automaticly now its become a pc how can i install my mac osx again?

i install windows 8 via boot camp but its corrupt so i recover this by the windows 8 by the help bootable usb which is helping me to install windows 8 but in recovery my osx is formatted automatically now its become a pc how can i install my mac osx again in my mac mini? please help me

If you have a Mid 2010 model: Computers that can be upgraded to use OS X Internet Recovery. If later then see below:
Install Mavericks, Lion/Mountain Lion Using Internet Recovery
Be sure you backup your files to an external drive or second internal drive because the following procedure will remove everything from the hard drive.
Boot to the Internet Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND-OPTION- R keys until a globe appears on the screen. Wait patiently - 15-20 minutes - until the Recovery main menu appears.
Partition and Format the hard drive:
Select Disk Utility from the main menu and click on the Continue button.
After DU loads select your newly installed hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Click on the Partition tab in the DU main window.
Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Click on the Options button, set the partition scheme to GUID then click on the OK button. Set the format type to Mac OS Extended (Journaled.) Click on the Partition button and wait until the process has completed. Quit DU and return to the main menu.
Reinstall Lion/Mountain Lion. Mavericks: Select Reinstall Lion/Mountain Lion, Mavericks and click on the Install button. Be sure to select the correct drive to use if you have more than one.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.
If you have an earlier model:
Clean Install of Snow Leopard
     1. Boot the computer using the Snow Leopard Installer Disc or the Disc 1 that came
         with your computer. Insert the disc into the optical drive and restart the computer.
         After the chime press and hold down the "C" key. Release the key when you see
         a small spinning gear appear below the dark gray Apple logo.
     2. After the installer loads select your language and click on the Continue
         button. When the menu bar appears select Disk Utility from the Utilities menu.
         After DU loads select the hard drive entry from the left side list (mfgr.'s ID and drive
         size.) Click on the Partition tab in the DU main window. Set the number of
         partitions to one (1) from the Partitions drop down menu, click on Options button
         and select GUID, click on OK, then set the format type to MacOS Extended
         (Journaled, if supported), then click on the Apply button.
     3. When the formatting has completed quit DU and return to the installer. Proceed
         with the OS X installation and follow the directions included with the installer.
     4. When the installation has completed your computer will Restart into the Setup
         Assistant. Be sure you configure your initial admin account with the exact same
         username and password that you used on your old drive. After you finish Setup
         Assistant will complete the installation after which you will be running a fresh
         install of OS X. You can now begin the update process by opening Software
         Update and installing all recommended updates to bring your installation current.
Download and install Mac OS X 10.6.8 Update Combo v1.1.

How to replace usb port in mac air 13" mid 2011?

How to replace usb port in mac air 13” mid 2011?

Take the MBA to an Apple store or an Authorized Apple Service Provider. If you are contemplating doing it your self, examine the instructions on the iFixit.com web site.
Ciao.

TS1986 how to connect usb optical mouse with scroll to mac

hey its manish hea
please can i get to know how to connect usb optical mouse with scroll so tat it can be used for AUTOCAD 2011
i connected the mouse but its not working
please suggest

Welcome to the Forum!
Well, there is no big deal about USB mouse, it's plug and play.If your mouse doesn't work at all, then its broken, or it's not compatible with mac. Test it in a PC.

How can I make my Mac recognize my USB device when I plug it in?

How can I make my Mac recognize a USB device when I plug it in? When I plug in my flashdrive drive, the device doesn't show on my desktop, so I have to search for it...

You can try using 'NTFS-3G', its free and you can download it at: http://mac.softpedia.com/get/System-Utilities/NTFS-3G.shtml

How can i get my mac book pro to recognize a JVC camcorder?

How can I get my mac book pro to recognize a JVC camcorder using a Sony CAMERA USB cord??

Gotta say thank you — again. Sorry the posts were spread out over more than one location. I'll check and see if Third Party Software is considered a "peripheral", maybe that would have been a better single thread choice?
Definitely news we can use and the reference link is appreciated.
OT ~ We keep becoming more and more aware of how easy it is to lose one's bearings when it comes to keeping up with info tech. My husband and I are both official members of the geezer set and have been out of the work force for some years. You really do pick up so much just by being in the environment where people are using things to get work done. A couple of old MP3 players, PPC G5, and a vintage Inspiron 3800 that someone didn't want any more is about it. No cell phone, no iPod, no iPad, no home wireless network, no streaming media. Fixed income. So we do with what we can as long as we can. If we could get by without that Intel processor, we'd probably make do with what we've got. On the other hand, we've really wanted a notebook for a very long time and have to admit that needing to upgrade to accomodate my husband's project is pretty much just the "reason" we need. I really mean it when I say that we are beyond appreciative that users take the time to share info and patiently educate those of us who fall into the "slow tech" category.

My mac book air can't start installation, because i use windows installation in DOS to make partion, now no mac os on it. How to get back the mac os? i have a window based iso image from a friend, because in my country there is no Apple service.

my mac book air can't start installation, because i use windows installation in DOS to make partion, now no mac os on it. How to get back the mac os? i have a window based iso image from a friend, because in my country there is no Apple service.

It sounds like you destroyed your boot partition and the recovery partition. Depending on it's age, your MacBook Air might be able to do a net boot. Plug and ethernet connection into it and attempt to boot. If it has the right firmware, it will find a net boot configuration on the net and boot that. Then it will give you a Recovery Partition like display and allow you to reinstall the OS X version that came with it.... assuming that it was Lion or ML. If your computer came with Snow Leopard, then even the net boot won't work.
At that point you need a bootable USB Key, or an external DVD drive AND a Snow Leopard installation DVD.
An Apple Store, if there is one nearby, MAY be able to get you going again. However, whatever is on the SSD now will be toast too.

How do I download the Mac App Store using OS X 10.5.8

how do I download the Mac App Store using OS X 10.5.8

Well, you can cancel your Snow Leopard order if it hasn't already shipped. You need not wait on it as you can download Mountain Lion now that you have a redemption coupon (I assume that's what you meant by the email.)
After Mountain Lion is installed you can download a free copy of Mavericks. This all assumes that your computer meets the requirements for Mountain Lion.
Before you do any upgrade I strongly urge you to do this:
Repair the Hard Drive and Permissions
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
Personally, I would erase the hard drive then install the new OS X version. First, make a backup of your files from which you can later restore.

MacBook pro does not start. How can I back to Mac OS X Lion?

I have a MacBook Pro. On my MacBook i made three partition, then I installed window 8. After that I started windos and try to delete third partition by Administrator tool from windows operating system. After that my MacBook does not start. How can I back to Mac OS X Lion?
After that I again install windows 8 from a DVD. Windows start well, but I can not start Mac OS system, may be it was 10.6. Sever times I tried to install OS X Lion 10.7 thought DVD, I could not. On MacBook I have a lot of important data.
What can I do. I want to a complete suggestion. Please help me to solve the problem.
My MacBook Pro model no. A1286.

You installed Windows improperly the result of which was to wipe out the bootloader for OS X. You can give this a try:
Boot Using OPTION key:
1. Restart the computer.
2. Immediately after the chime press and hold down the
"OPTION" key.
3. Release the key when the boot manager appears.
4. Select the OS X disk icon from which you want to boot.
5. Click on the arrow button below the icon.
If you are still unable to boot from the OS X volume then you will need to reinstall OS X:
Reinstall OS X without erasing the drive
1. Repair the Hard Drive and Permissions
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
2. Reinstall Snow Leopard
If the drive is OK then quit DU and return to the installer. Proceed with reinstalling OS X. Note that the Snow Leopard installer will not erase your drive or disturb your files. After installing a fresh copy of OS X the installer will move your Home folder, third-party applications, support items, and network preferences into the newly installed system.
Download and install Mac OS X 10.6.8 Update Combo v1.1.
This will destroy the Windows bootloader so you cannot boot into Windows. The solution is to remove all the partitions on the drive except the OS X partition, then expand the OS X partition to take up the entire drive.
Use Boot Camp Assistant in the Utilities folder to create a Windows partition on which you can install Windows. You cannot have any other partitions on the drive besides these two.
Now given all the above you may be able to install a third-party bootloader that would work with the setup you now have: Boot Runner 1.4.

HT5048 can i and if i can how do i update my mac os x 10.6.8 system to the mac os x 10.7??

can i and if i can how do i update my mac os x 10.6.8 system to the mac os x 10.7??

1)
OS X Lion system requirements
To use Lion, make sure your computer has the following:
An Intel Core 2 Duo, Core i3, Core i5, Core i7, or Xeon processor
Mac OS X v10.6.6 or later to install via the Mac App Store (v10.6.8 recommended); you can install without Mac OS X v10.6 by using an OS X Lion USB Thumb Drive, available on the Apple Online Store
7 GB of available disk space
2 GB of RAM
If your Mac does not meet these requirements, you will need to upgrade your Mac before installing Lion.
2)
The Mac APP Store.

Need 256 Bit AES Full Disk Encryption for a Mac. The other discussions regarding this issue are very old. Does anyone have any current advice regarding encryption software?

Does anyone have any advice regarding 256 bit full disk encryption software for Macs? The other discussions on the topic are years old, so I would like some current input. Thanks for your help in advance.

Depending on your Mac, you might not want to upgrade to OS X 10.7 or 10.8 as it will not run the PowerPC based software your currently using costing a bundle to replace it all, also they will slow down your machine if it's not a more recent issue. You don't want to upgrade OS X without AppleCare defending your possibly bricked logicboard that's for sure.
Filevault encrypts the boot drive, however in doing so makes it near impossible to fix if you have a software issue and need to recover files directly or by using specialty software. Also it robs the machine of performance even more than the Lions do. So you will really need a SSD to work best with 10.7/10.8 and Filevault, then it has to be freshly installed. Filevault needs 50% free space on the boot drive, then it's going to write to the slower 50% half of the hard drive where performance is terrible compared to the first 50%.
Also Filevault is cracked under certain conditions, and if someone gets their hands on the machine (like the law) and knows what they are doing.
If you take your Filevaulted machine to Apple to fix, they are going to require the password to fix the machine obviously.
Software based encryption is vulnerable, you might want to instead place your sensitive data on external self-encrypting hardware that doesn't rely upon software or computer hacks/bypasses (ike freezing the RAM) to get to it.
http://www.datalocker.com/products/datalocker-dl3.html
Iron Keys for portable USB self encryption, both work with any computer, so your not locked into one platform.
With the senstive data off the computer and on a external device, there is the option of removing, hiding and securing the device. If used with a computer that's never connected to the Internet, it's safe from snoopers, except from a survelliance van parked outside your door.

HT1178 how to add usb drives to time capsule after initial setup

How to add USB hard drives to TC after TC is already setup then access the usb drives by both PC and mac?

1. Just plug them in. The drives need to be formatted as FAT16, FAT32, or Mac OS Extended (Journaled), and may need to be connected through a powered USB hub.
2. Click here for information.
(82647)

How can I fix my mac mini g4 1.5ghz which gets the must reboot message? what is the reason?

How can I fix my mac mini g4 1.5ghz with 2gig ram which gets the must reboot message randomlly? what is the reason? Hard disk has no errors.

Based on your description, you are having a kernel panic.
Can you post some of your crash logs? Might be a clue. See Mac OS X: How to log a kernel panic http://support.apple.com/kb/HT2546
Understanding crash logs isn’t easy and it’s hard (sometimes impossible) to decipher the cause of the problem. Take a look at Apple’s Crash Reporter document at http://developer.apple.com/technotes/tn2004/tn2123.html Also look at Tutorial: An introduction to reading Mac OS X crash reports
http://www.macfixit.com/article.php?story=20060309075929717
Kernel panics are usually caused by a hardware problem – frequently RAM, a USB device or a Firewire device. What external devices do you have connected? When trying to troubleshoot problems, disconnect all external devices except your monitor, keyboard and mouse. Do you experience the same problems?
To eliminate RAM being the problem, Look at this link: Testing RAM @ http://guides.macrumors.com/Testing_RAM Then download & use Memtest & Ramber.
Do you have an Apple Hardware Test disc (the AHT is on the Install/Restore DVD that came with your Mac)? Running the Apple Hardware Test in Loop Mode is an excellent troubleshooting step for finding intermittent hardware problems. It is especially useful when troubleshooting intermittent kernel panics. If Loop Mode is supported by the version of the Apple Hardware Test you are using, you run the Extended Test in Loop Mode by pressing Control-L before starting the test. Looping On should appear in the right window. Then click the Extended Test button.The test will run continuously until a problem is found. If a problem is found, the test will cease to loop, indicating the problem it found. If the test fails, be sure to write down the exact message associated with the failure.In some cases, RAM problems did not show up until nearly 40 loops, so give it a good run.
May be a solution on one of these links.
http://docs.info.apple.com/article.html?artnum=106227 What's a "kernel panic"? (Mac OS X)
http://www.macmaps.com/kernelpanic.html Mac OS X Kernel Panic FAQ
http://www.index-site.com/kernelpanic.html Mac OS X Kernel Panic FAQ
http://www.thexlab.com/faqs/kernelpanics.html Resolving Kernel Panics
http://www.macfixit.com/article.php?story=20060911080447777 Avoiding and eliminating Kernel panics
http://macosg.com/group/viewtopic.php?t=800 12-Step Program to Isolate Freezes and/or Kernel Panics
 Cheers, Tom

How do I get my Mac to recognize external drive filled with 5 projects, created at Apple Store?

How do I get my Mac to recognize external drive filled with 5 projects, created at Apple Store? I created 6 hrs worth of projects on computer in apple store with my external. came home my computer did not recognize it at all. went back to apple, they said oh click the news reel bottom left that will do it, came back home and nope....not recognizing it, in fact it says no events exist on this disc. I want to get the 5 projects and put up on vimeo tonight. ugh.

Hi Tom,
I'm so impressed with how you help everyone solve their problems. I will do my best here, but my husband will be home soon and knows how this large external is formatted.
How late do you all work there? I'm on east coast. Is the screen shot you wanted? I opened up external and
this is what I see.
Drive is connected to usb in back of computer. N

How to Encrypt USB on Mac?

Similar Messages

Maybe you are looking for