How to end jump after chapter

Ok, I'm sure this is simple, but I haven't been able to figure out how to do it. If I have a movie with 5 chapters, and my menu has a link to each chapter and a play all option, how do I tell DVD SP to jump bank to the main menu if someone only wants to view a specific chapter (eg Chapter "C") but not have it return them to the main menu at the end of "C" if they choose the play all option?

Definitely stories... but also scripting can work, have a look here:
http://www.editorsbin.com/apple/dvdsp/tutorials/playall/index.html

Similar Messages

End jump after each chapter

I have DSP 4.2.0
I want the DVD to jump back to the menu page after each chapter is finished.
Can someone direct me on how to do this? I tried under "connections" setting it up, but it didn't work.
Gerry

First off, there are three different layouts that you can use for DVDSP. The vast majority of people use the 'Advanced' layout which gives access to all of the tools and settings. Whilst it looks daunting, I recommend you switch to it. That way, you'll be seeing it the way others see it, and the instructions will make more sense to you.
You can add commands to lots of elements in your project. If you have a single video in your timeline and have put chapter markers along it, you can set an 'end jump' on each chapter marker by simply clicking on the marker once and looking in the property inspector for the 'end jump' setting. Use this to set each to go back to the main menu when it has played through.
However, this will not be the most reliable way to get this done. It will work on some players, but users will be able to skip through the track and bypass the end jumps. You can prevent this if you want, but an easier and more robust way to achieve this is to use stories.
If you look on the top bar of the app you'll see icons that enable you to add new elements to your project. Adding a story is as simple as clicking on the story icon.
A story is a container for chapters, and works like a play list in iTunes. You can add one or more chapters to the story, but in your case you only want to add one per story. Stories are also elements in your project and they can have end jumps on them. You add a story, and then in the story tab drag a single chapter from the list of chapters into the story container. You repeat this for every story you need. Then set the end jumps for the stories - click on a story in the outline view tab or graphical view and look in the property inspector... set the end jump for each story to go back to your menu.
The buttons on the menu now need to have the story container as the target and NOT the chapter inside them. This is crucial.
If you do this correctly it will work as you want it to, with just a single chapter playing and then the disc sending the viewer back to the menu.

Does track end jump trump chapter or story end jump?

I have a DVD with 1 menu & 3 tracks. Tracks 1 & 2 each contain l short video (different audio or video formats) and track 3 contains 3 short videos which I have broken into 1 story w/3 chapters. On track 1, there is 1 chapter marker and I have set its end jump back to the menu. The end jump for the track itself is set to Track 2. Button 1 connection is set to the chapter marker. Ditto for track 2 except its end jump is set to track 3 while its one chapter marker end jump is set to menu 1. Button 2 is targeted to track 2, chapter 1. Track 3 has 3 chapters. It's end jump is set to menu 1. The chapters within the story are also set to menu 1 and it works the way I want it to. Button 6 is a PLAY ALL button targeted to track 1. When I select button 1, the video ends and continues on to track 2 instead of going back to menu 1;. When I select button 2, it also contiunues on (to track 3) instead of jumping back to menu 1. My goal was to be able to access each individual video and then jump back to the main menu. I tried adding stories to each of Track 1 & 2 and making the story end jump go back to he main menu but it seems the track end jump trumps both chapter & story end jumps. Anybody have any solutions to my problem? thanks.
Steve

Hi:
You can do it using a script. Take the DVDSP User Manual and look for the topic Jumping to a Menu's Loop Point (Chapter 14 - Creating Scripts) and you'll find a detailed description of how to do it.
DVDSP User Manual download page
Hope it helps!
(1191)
Alberto

Chapter Markers End Jump Too Early-Problem

Folks, I am using DVDSP 4 and my chapter markers keep stopping too early from the burned DVD. When I play the Video_TS folder using Apple DVD player all is well. When I burn it and play it on a standard DVD player, all the chapter markers end jump earlier than they should - cutting off my full credit rolls on my video track.
All of my chapter markers came from Final Cut Pro where I initially made them.
Please advise.

Make sure you test this on more than one player if it is a "for real" project of replication or duplication. All players are not created equal and there are the real weird things that may show up on only one or two players, but you need to make sure. You may want to try the other methods and see if it helps on the problem player just for fun. (Yeah, I know does not sound like much fun, but it is sort of interesting I guess )

2 menus: how do I end jump back to the menu I was just in?

Hello,
I'm fairly new with DVD SP, but am happily hacking my way around. From what I've read, I believe the answer to my question lies with Scripts, which I'm not familiar with and found the official documentation on it a little thin.
Perhaps someone can help out with the following...
I have 2 menus pointing to the same Track. That Track has several elements in it, all Chapter Marked. On the two menus, the buttons point to each of those tracks, and the chapters play fine.
The problem is with the end jump of each chapter. Currently, I have it set to return to Menu 1, but ideally, if my last chapter was selected from Menu 2, I would like for the end jump to send the user back to Menu 2, not Menu 1.
Again, I'm totally novice with scripts. If this is too complicated to explain, can anyone direct me to some documentation somewhere that would narrow this technique down for me?
Thanks in advance,
Alain
MacBook Pro 2.16GHz Intel Core Duo Mac OS X (10.4.8) 2 GB Memory

Take a look here
http://dvdstepbystep.com/stories_details.php
You can set the stories so that each one jumps to a different place
1.) Remove all jumps from the markers outside the story
2.) Make the stories by dragging the markers you want to play (they can be identical, so each story can play marker 1,2,3 for instance)
3.) If story A called from menu 1, set end jump for story A to menu 1

How do I make track end jump go to menu and highlight next button.

I have a DVD with several programmes each with its own menu button, with track (button) one as the highlighted default. I would like the end jump of each programme to be back to the menu (easy) BUT with the button for the next track highlighted. How do I do that.

Click on the Track your want to jump from - then in the properties panel select "End Jump". A pop out menu will appear giving you the choice of where to go. Select the Menu you want and choose the Button you want to land on in the list.

How do I ignore end jumps on tracks?

I put end jumps on my tracks to get viewers back to one of the submenus that they chose the track from, but I want a play all function as well. How do I get all the tracks to play all the way through without them jumping back to a menu?

Stories or scripts, stories probably easier
http://dvdstepbystep.com/stories_details.php
http://dvdstepbystep.com/passelections.php
http://dvdstepbystep.com/stories.php
http://discussions.apple.com/thread.jspa?messageID=447
1104
http://discussions.apple.com/thread.jspa?messageID=454
8144
http://discussions.apple.com/thread.jspa?messageID=396
2038
http://discussions.apple.com/thread.jspa?messageID=329
5221
I have 27 tracks though, not just one. Can I still create stories?

Why my FaceTime will ended call after connecting? How to solve it.

This few day I keep on FaceTime but keep on fail. I using iOS 6 and FaceTime to my friend who using ios7. Be4 tat still okay. But this few day keep ended call after reconnecting. Wad going on. I reset network, change date to pass year and change back. After tat restart device and so on. But the problem still same. Help me

There seems to be some FaceTime problems. Check other posts like yours.
Many users have reported that updating to iOS 7.1 has solved the problem. You can try to see if the update will solve yours or wait for Apple to resolve the issue.

How to update Back end applications after successful message transport

Hi All,
Currently we have a SOA composite that reads failed messages(Msg type 3) from B2B JMS message queue and updates our business tables of any b2b failures. However we are not sure how to handle successful B2B message transport scenarios.
How back end applications(SOA composite) know b2b messages are handled successfully by B2B? How do we capture this successful scenarios? We don't have ack enabled.
Thanks,
Kathar

However is there any push mechanism from b2b for this scenario.Option#1-
B2B pushes messages details to BAM AQ (B2B_BAM_QUEUE in SOAINFRA schema) from where BAM picks up the details and uploads in it's data objects. If you are not using BAM then you may receive messages from this AQ. This is again a batch job and it is controlled by below two parameters -
Enable BAM
BAM Polling Interval
http://docs.oracle.com/cd/E23943_01/user.1111/e10229/bb_config.htm#CEGEADFJ
Option#2 -
Write your own DB job which pulls details from B2B_INSTANCEMESSAGE view and pushes it for you at desired location.
Only batch job is suitable for this scenario because B2B uses different set of intermediate states while message processing whereas you are only interested in one terminal state (MSG_COMPLETE)
Regards,
Anuj

DVDSP - End Jump to Menu 1 and Chapters Markers from Final Cut Pro 5.0.4

I went to the Final Cut Forum and they sent me here:
Final Cut 5.0.4
DVD Studio Pro 4
I got to the point where I set the end jump back to Menu 1 for each of the two films listed with buttons on Menu 1 of my DVD.
One film has no chapter markers and the other has 4 chapters that I set up in Final Cut Pro, edited as Chapters and Saved for DVD Studio Pro when exporting the Quick Time. This functionality is great and very nice. At the end one does return to the (main menu) from both short films.
What I found, as stated in the manual, was the first chapter marker is automatically put in by DVD Studio Pro. On the film with 4 chapters by depressing the button on the remote one can skip ahead. When on reaches the 4th chapter one does not have a 5th marker for the end and one has to watch the 4th chapter to reach the end and then go back to the main menu. What I was trying to put in was a 5th chapter marker, or a marker at the end of each film where if one wanted to go back to the Main Menu before the film time had elapsed, one could hit the chapter ahead button and reach the end of the film, and be returned to the Main Menu.
When I put in end markers in DVD Studio Pro, the build stops stating there is a GOP boundry problem. After reading the manual I went back to end chapter markers in Final Cut, but these do not come through. I tried more than one second from the end of the movie but this does not seem to be the answer.
thanks in advance for your help.
Bill

Yes, the end marker is the solution, and it does need to be a certain distance from the end of the media. If placing markers in FCP, I put it 1:03 from the end. If you need to you can extend the FCP sequence, or even the track in DVDSP with a little black. In DVDSP, if I don't have an embedded end marker in my asset, I use the little "clicker" arrows next to the time fields in the marker inspector to move the marker two GOPs or "clicks" from the very end of the asset or track.
Hope this helps -
Max Average

Marker/End Jump Question??

Hi,
I'm creating a menu where I have 10 buttons that link to a solid video track with 9 commercials on it. There are markers in DVDSP before each commercial. The first button is "PLAY ALL" which, when clicked, will of course play the whole video track of all 9 commercials. The following 9 buttons are each of the names of the commercials and when clicked, it takes the viewer to the marker in front of the corresponding commercial. I figured out that if I set the "End Jump" of the marker back to it's button in the menu, it does so. The only problem is that if I set the marker to end jump back to the menu, when the "PLAY ALL" button is selected, it still "end jumps" back to the menu after the first commercial. Is there any way to have the "PLAY ALL" button bypass the marker end jumps? Is the only work around to also have separate tracks each with separate commercials on them? I will have 4 menus and a total of about 35 video clips if I do this and will take forever and also take up a lot of space on the DVD.
Let me know if anyone knows a way around this.
Thanks in advance,
Eddie

no - you should be able to see and hear the result in simulator.
You could try building the project to your hard drive and using DVDPlayer to open the Video_TS folder and test it from there.
Did you create 9 stories with a chapter in each (removing the end jump command on each chapter marker), or did you add one story and add all 9 chapter entry points to is as your play all?
In my opinion, the latter is the better way to go.

Wait for end of DVD chapter

Hi,
How can I play a DVD chapter but only until it ends and then
jump back
to a frame in my Director movie?
I know that I can use:
member("DVD").play([#title:1, #chapter:1])
Will that pause at the end of chapter 1?
Does anything special have to be encoded into the DVD chapter
at the
end?
How can I tell if chapter 1 is done?
At the moment I have a DVD that at the end of a chapter that
i want to
play, it jumps to a menu in the DVD. I want it to jump to my
Director
menu page. Can I do this without changing anything on the
DVD.
Thanks in advance
John

Encore doesn't offer a feature that would pause at the end of a chapter.
It could be done with a workaround, but instead of pressing the Play button, the user would have to press the Next button if a timeline or chapter playlist is used, or the Enter button if a menu is used.

Easy Question about end jumps

Here is my menu lay out. Three buttons.
Play all (Want it to play enire movie)
Play part one ( Play up to track 6 and return to menu)
Play part two (Play from track 7 to end)
Can someone please tell me how to do this correctly? What am I doing Wrong

Hi Deon - it's hard to say what you are doing wrong if you don't tell us what you are doing!
What I would do to set this up is place all the footage into a single track, set markers between each section and use stories to define which chapters play when each button is pressed. Your 'play all' button would point to the track itself. Your 'Play part 1' button would point to a story container, inside which I would place chapters 1 to 6. Finally, the remaining chapters would be in a second story and this would be the button target for 'Play part 2'.
You do not need to have the assets in separate tracks at all - if you want to play a single clip it can be in a single story with just one chapter marker in - each story can have an end jump setting to return back to the menu...
Hopefully this will help get you on the way, but if not please give as much info about what you have already done so we can start to troubleshoot it with you.

DVD Studio Pro end jump

Hi I'm having a problem doing a custom build for a DVD
I want to create a fairly simple dvd with a play all function that links to a track with multiple chapters.
I also want a second menu that allows you to choose to watch an individual chapter without playing all the following chapters in the track.
I have tried setting up end jump functions on individual chapters or tracks but the end jump works on the play all option. So for example if at the end of chapter one I have an end jump back to menu 2 if I then map the play all option to the whole track the end jump at the end of chapter 1 still takes you back to menu 2. I can't seem to make the end jump work on one and not the other, short of having two sets of tracks in the project... but this is not possible as there is just over an hour of footage, so if I have a duplicate of the track the quality and operation of the disk is compromised.
Any help please.... Super urgent!

Welcome to the boards
As Tony said, stories are an option
Take a [look here|http://dvdstepbystep.com/stories_details.php] for some info on stories. You can ignore the part about the langauge and subtitles, but look at the sectioning.
Play All story will have all the markers, just section 1 will have section 1 marker (whatever you name it) and so on. At the bottom of that link if you look there will be a creen with targets listed and how to set them...

End jump for Play All not working

Below is my question on an earlier post, followed by an answer from a forum member, which I thought was the solution. I followed his suggestion to link the play all button to Track 1, and then clicked in the track to get the track inspector and linked the end jump to Menu 1. It must have worked in the simulator, because I marked Steve's answer 'solved', but now when I play the discs I've burned, the play all button plays only the first selection and then return to the menu. Same thing happens in the simulator.
So please tell me how to get that play all button to really play all. It's driving me crazy, and I have to recall 2 discs I sent out to clients so far. If someone could walk me through it, I'd really appreciate it, thanks!
MY POST: I have 9 markers on the track for 8 selections, the 9th was added so that the track would play all the way through when the Play All button on the menu was clicked. When the user clicks on any one selection it plays through and returns to the menu. I can't get the Play to do that, it just stops at the end and the user has to click play to get the menu back on the screen. Again, the manual on page 490 mentions setting end jumps and says the end jump for the last marker is not linked to any targets, and must be set yourself. So I have tried several times to do this in an number of ways as suggested by the book. No go.
Again, simplest possible explanation, please, as I've used a lot of time on this, and have lost most of my concentration and patience(!)
thanks
Dual 1.25 GHz PM/G4 Mac OS X (10.3.x) DVDSP3
Steven Cohen
Posts: 103
Registered: Jul 10, 2001
Re: End Jump Setting for Play All
Posted: Aug 19, 2008 1:43 AM in response to: Keith Rodan
Solved
Click to reply to this topic Reply email Email
Link the "Play All" button to the track, not the first chapter marker. Then click on the track. In the inspector, settings for the track will appear. For end jump, select menu 1. (or whatever you want it to jump to.) If you want each segment on the track to play individually and then jump back to the first menu, easiest way to do that is with stories. Check manual or do search of this forum on ways to do that. Hope that helps.
Steve

Hi Keith - there are several ways to do this. By far the simplest is to use stories, but there are two ways of doing that, too.
Here's one way:
Make sure you have the 8 markers that you need, and make sure that each marker has got an end jump on it to return you to your menu and the button for that section. Now add a single story and add ALL of the markers to that (drag them over from the story editor window left to right). You'll notice that the markers are labelled 'Chapter 1 Entry', which means you are not adding the end jumps to the story... each marker will play and then go on to the next in the sequence, ignoring any end jumps you have already put on the markers.
Now set your play all button on your menu to go to the story container (NOT chapter 1 inside the story). All you other buttons should point to the relevant markers on the track and not in the story.
Set the end jump for the story to go back to the 'play all' button on your menu, and set the menu call for the story to do the same. You can set the menu call for the markers as you want, too.
You should now have a single track, eight markers with end jumps, a single story with 8 chapter entry markers in it and a disc that alows you to play a single marker or the entire lot.
The alternative way to do this is to add your 8 markers as before (no need for 9), make sure there are NO end jumps on the markers and then add 8 stories. Put one marker into each story and set the end jumps on each story to go back to the relevant menu button. Set the menu calls for each story to do the same.
Now set your single chapter play menu buttons to the relevant story container (and NOT the chapter inside it), and your pay all button to the track itself. Set the end jump and menu call for the track to go where you want them to.
There are then at least two other ways to do this using scripts... but I figure these here should cover what you need right now! I'd recommend using the first method - it's quicker to set up and more simple to implement.

How to end jump after chapter

Similar Messages

Maybe you are looking for