How to enhance lenovo G485 camera? and how to open communications settings?

So I recently installed a webcam software (youcam) and I noticed that the solution is not as good. When I tried the setting of youcam, it was already at its max solution which is 640x480. I was hoping if I can enhance my camera solution further through communications settings as I saw from youtube but I can't find it in my laptop. how can I enhance the solution of my camera or should I change my webcam software. What's a good one? Thanks

Swila, were your "other images" previously edited in Camera Raw? I.e., do they already have saved image settings? The defaults that you save via the flyout menu will only apply to new images, or if you reset an existing image to the defaults. (e.g., choose "Camera Raw Defaults" from the flyout menu).
Eric

Similar Messages

HT4623 my IPod Touch is a generation 3 with a camera and when i go into my settings and try to do what the instructions on your website say but in general i only have About and then the rest of the bars but i don't have one that says Software Update

my Ipod Touch is a generation 3 with a camera and when i go into the settings to look for the Software Update bar i don't have one

If you have cameras then you have 4G iPod. To update connect to your computer and update via iTunes
iOS 4: Updating your device to iOS 5 or later
- A 4G to 6.1.5 Requires iTunes version 10.7 or later. For a Mac, that requires a Mac with OSX 10.6.8 or later

New camera and can't open raw files..

I just upgraded my camera from a rebel xt to a T3i and now I am unable to open RAW files.
I am using PSE 5.0. Any advice?

Hi,
The T3i requires a minimum level of ACR 6.4 - which isn't supported by PSE 5
Your options are
1) Upgrade pse to PSE 9 or higher (PSE 12 will probably be out soon)
2) Use the Canon software that came with your camera
3) Download/Install the free Adobe DNG Converter to convert your CR2 files to DNG files - the DNG files can then be processed by PSE 5
If you consider upgrading, then you could download the trial version to see if you like it.
Brian

When I click the camera and when it opens it just black.

I was going to take a picture with my iPod & I saw a button option next to the main icon that is used when taking a picture I clicked it and the screen went all black. What can I do?I

Have you tried a Reset...
Press the sleep/wake button & home button at the same time, keep pressing until you see the Apple logo, then release the buttons...
Restart / Reset
http://support.apple.com/kb/ht1430

MS Vista Service Pack 2 and BB Desktop Mgr Communication Problem

I have recently update MS VISTA with Service Pack 2. Now the BB desktop manager will not sync with my BB 8320. Have there been any issues with this. Is there a resolution? If so what is it? Thanks!
Solved!
Go to Solution.

Perhaps...if you wish to do so, I suggest the following steps (insert plenty of reboots of your PC...not just restarts, but full power down reboots). Also, it is advised that you be logged into the PC on an account with full admin rights. Further, under Vista, use the "Run As Administrator" option for everything.
1) Remove your device OS update package from your PC (add/remove programs)
2) Cleanly uninstall the RIM DTM software:
KB02206 How to perform a clean uninstall of BlackBerry Desktop Software
3) Get a fresh download of the RIM DTM software:
http://na.blackberry.com/eng/services/desktop/
Choose the version that is newest and (if applicable) compatible with your PIM (if you are synchornizing via USB):
KB12268 Applications supported by BlackBerry Desktop Manager for synchronization
4) Download (to your PC) a fresh copy of your device OS package from your carrier:
http://na.blackberry.com/eng/support/downloads/download_sites.jsp
5) Install DTM to your PC
6) Install (also to your PC), the device OS package
7) Start the organizer configuration over:
KB17022 How to configure organizer applications for synchronization using BlackBerry Desktop Manager
Hopefully that will get things going again.
Good luck and let us know!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

HT5621 I changed my apple ID on my laptop and I can no longer sync calendars from my iphone4s to the Macbook. I went to settings and when I open iCloud account settings, my old apple id is grayed out and I can't tap it to change it. Any suggestions??

I changed my apple ID on my Macbook but I am unable to sync calendar from my iphone 4s. When I go to settings in the phone, my old ID is there, but it is greyed out and I can't change it. I was able to change the app store ID, but the one in iCloud settings seems stuck. Any suggestions??

You need to use the old ID and password to delete the iCloud account. After you delete the old account, you can sign in with the new ID in iCloud.
Have you seen this.
http://support.apple.com/kb/HT5796
iCloud
iOS 6 and later: Go to Settings > iCloud.
If you signed out before changing your Apple ID, enter your current Apple ID to sign in. The data from your iCloud account will download to your device.
If you're still signed in with your previous Apple ID:
Scroll down and tap Delete Account. Depending on what iCloud options are turned on, you'll be asked to confirm that you want to delete data from your device. To confirm, tap Delete. (If you're using iOS 7 and have Find My iPhone turned on, you'll be asked to enter the password for your previous Apple ID. Enter the password, then tap Turn Off.) The data will be deleted from your device, but not from iCloud.
Enter your current Apple ID to sign in. The data from your iCloud account will download again to your device.

Intensity plot and MSnode-window communication

Two questions:
1) Is there an intensity plot function that can be called from the mathscript window to display 2D arrays (such as a grayscale image), similar to the matlab function "image" or "imagesc"? The only options I saw were to display a 2D array on a 3D plot. Yes, I know the intensity plot is available in the variable display window, but I would really prefer a command-line option.
2) When I wire a variable to a matlab script node and run the VI, that variable becomes available in the matlab command-line window. I find this very convenient. Is it possible to do this (or something like this) with the mathscript node and window? I know I can communicate between the node and window with globals, but I have to go through the trouble of defining globals, and this only works if I create a project for my VI, which is just far too much overhead.
thanks.

Hello,
In response to your first question, we currently do not have such a function. However, such functionality is on the roadmap for a future release. As for the second question, each MathScript node is currently sandboxed -- that is, it has its own variable space. This was done so that there is no variable collision between different MathScript nodes. We will be improving the interaction between the MathScript node and the MathScript Window in the future and your suggestion is one idea we are considering. It would most likely be an option on the node and not enabled by default to prevent any variable collisions.
You do not need to create a project in order to use globals to share data between the MathScript node and the MathScript Window. However, the MathScript node and the MathScript Window need to be in the same application instance. Thus, if you are already using projects, make sure you launch the MathScript Window from the same project in which your VI is located. If you are using the default application context (no projects open), then you should be able to share a variable "a" between a MathScript node and the MathScript Window by typing in each:
global a
Grant M.
Staff Software Engineer | LabVIEW Math & Signal Processing | National Instruments

NB205 and the software Wireless Communication Switch

I have just upgraded my NB205-N210 from Windows XP to Windows 7. After running all the relevant Windows Updates and the Toshiba Software Installer for Windows 7, just about everything works great. (Note: my function keys do work in conjunction with the Flashcards utility.)
The one problem is wireless. Some people have posted a related problem, but I think I can pin down the source more precisely. Fn+F8 cannot enable wireless, and Flashcards give the error "Wireless communication is disabled. Please turn on the Wireless communication switch." The NB205 does not have a physical switch to turn on the wireless hardware. In Windows XP, the NB205 turned wireless on and off through a software switch. Is there a version of this software switch for Windows 7? If not, does anyone know a workaround?
(One more note, I have also tried uninstalling the adapter, but that made no difference.)
Solved!
Go to Solution.

I have same problem with my NB 205-N210, I Upgrade from windows xp to windows 7 ultimate but Fn key itsn't function, I cant use my wifi to conect, its always disable..,but now I found a solution, this is my step
1. I'm download & install ACPI Flash BIOS version 2.10 for mini notebook NB200/NB205 (PLL20U/23U/25U/28U)(v2.10; 06-25-2010; 4...
2. Im install util_tvap_TC00214700M (version 1.2.33
3. then Install Toshiba Flash Cards Support Utility for Windows Vista/7 (32/64) from here: http://www.csd.toshiba.com/cgi-bin/tais/support/jsp/modelContent.jsp?ct=DL&os=&category=&moid=246476...
now my NB205-N210 Fn key its going function & my wifi is enable and works great....

Workflow advice on matching different cameras and lenses

Greetings. I'm currently trying to match six cameras and all their different lenses to produce identical images and I need advice on fine tuning my workflow on making the camera profiles.
Me and my team are shooting weddings. We have Nikon D3s, Nikon D3, 2x Canon 5D mk III, Canon 1D mk 3, Canon 5D mk II with 17 lenses and I'm in the middle of the process of matching their colors so when we shoot together I don't go crazy trying to match the white balance between all the cameras in Lightroom.
The issue I have is that I managed to make all the colors, contrast, saturation and brightness for all cameras and lenses on daylight shots identical (with minimal differences) but shots under 2800k light are very different.
I'll explain what I've done so far so that you can find my error and hopefully decide to help me.
I bought a 24 patch color checker and took photos with all cameras - once with a 2800k halogen lamp and then with a 5500k strobe (Nikon SB-800 @ 1/16 power). I shot in RAW. The exposures are good - no blown highlights or unexposed parts. In Camera raw I applied the "Camera neutral" color profile for all cameras. I exported the shots in DNG. For each camera and lens I imported the halogen and flash lit file into DNG Profile editor.
In the chart section I created a color table for the "2850 K only" halogen lit shot and then for the flash lit shot choosing "6500 K only".
So far so good. The colors are good but to achieve them for the different cameras or lenses I need to input different color temperatures and tint. What I want is to set identical color temperature for all photos (say 5500k) and to get identical colors regardless of camera or lens.
So the next step I took to get at least the daylight shots identical is to play with the "White balance calibration" under the "Color matrices" tab. For instance - DNG Profile editor determines that the flash shot should be set to 6050k +8 tint. I move the "white balance calibration" sliders until I reach the numbers I want above the flash shot (5500k). Because the colors shift I press the "Create color table" button again. My goal is to show the program that I want these (calibrated) colors to be achieved at 5500k +0 tint and not 6050k +8 tint. I get the result I want but that affects the 2850k shot. If I readjust the "white balance calibration" sliders for the 2850k shot and use "create color table" again, that ruins the 6500k adjustment.
So using this workflow I get either the daylight shots right or the tungsten lit shots, but not both.
So in short my question is - How do I create proper profiles that produce identical colors among all cameras and lenses under all white balance settings?
Thanks in advance for your help and for your patience to read all this.
PS
I fear I may have put this topic in a wrong section. If you don't mind, I'd post it in the Lightroom section.

Greetings. I'm currently trying to match six cameras and all their different lenses to produce identical images and I need advice on fine tuning my workflow on making the camera profiles.
Me and my team are shooting weddings. We have Nikon D3s, Nikon D3, 2x Canon 5D mk III, Canon 1D mk 3, Canon 5D mk II with 17 lenses and I'm in the middle of the process of matching their colors so when we shoot together I don't go crazy trying to match the white balance between all the cameras in Lightroom.
The issue I have is that I managed to make all the colors, contrast, saturation and brightness for all cameras and lenses on daylight shots identical (with minimal differences) but shots under 2800k light are very different.
I'll explain what I've done so far so that you can find my error and hopefully decide to help me.
I bought a 24 patch color checker and took photos with all cameras - once with a 2800k halogen lamp and then with a 5500k strobe (Nikon SB-800 @ 1/16 power). I shot in RAW. The exposures are good - no blown highlights or unexposed parts. In Camera raw I applied the "Camera neutral" color profile for all cameras. I exported the shots in DNG. For each camera and lens I imported the halogen and flash lit file into DNG Profile editor.
In the chart section I created a color table for the "2850 K only" halogen lit shot and then for the flash lit shot choosing "6500 K only".
So far so good. The colors are good but to achieve them for the different cameras or lenses I need to input different color temperatures and tint. What I want is to set identical color temperature for all photos (say 5500k) and to get identical colors regardless of camera or lens.
So the next step I took to get at least the daylight shots identical is to play with the "White balance calibration" under the "Color matrices" tab. For instance - DNG Profile editor determines that the flash shot should be set to 6050k +8 tint. I move the "white balance calibration" sliders until I reach the numbers I want above the flash shot (5500k). Because the colors shift I press the "Create color table" button again. My goal is to show the program that I want these (calibrated) colors to be achieved at 5500k +0 tint and not 6050k +8 tint. I get the result I want but that affects the 2850k shot. If I readjust the "white balance calibration" sliders for the 2850k shot and use "create color table" again, that ruins the 6500k adjustment.
So using this workflow I get either the daylight shots right or the tungsten lit shots, but not both.
So in short my question is - How do I create proper profiles that produce identical colors among all cameras and lenses under all white balance settings?
Thanks in advance for your help and for your patience to read all this.
PS
I fear I may have put this topic in a wrong section. If you don't mind, I'd post it in the Lightroom section.

How to open Import Browser options?

Can someone help me to figure out how to open my Import Settings Browser? Only "file" shows up and no other options.
I must have pushed a wrong button but can not figure out how to reset it.

What menu commands or toolbar icons are you using to import? What do you mean "only 'file' shows up"?
Can you not click the "Import" icon on the Toolbar?
Can you not execute the menu command "File➞Import➞ ... "?

How to use Camera and Wifi in G580

Hi,
I have bought a new lenovo laptop g580, i5, Os WIndow 7 32bit
The problem is i have install all the driver but haven't find any option to start camera and wifi
Please guide me how to do that

Hi sunilgupta91 and welcome to the community,
Here's your user manual . Page 23 shows the commands for turning on the wireless, (Fn +F5) and the camera, (Fn +Esc).
Normally, Psxsage would be right in turning the wireless on with a dedicated switch, but I don't see one for your machine. I don't see a dedicated camera program listed in your driver list so he would also be right in saying that you need a program, (like Skype) to use the camera.
There are free camera programs out there, I'll find you one.
Edit: Here's one that other users have recommended: yawcam
Here's one with effects: manycam
Dave
T430u, x301, x200T, x61T, x61, x32, x41T, x40, U160, ThinkPad Tablet 1838-22R, Z500 touch, Yoga Tab 2 Windows 8.1, Yoga Tablet 3 Pro
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!
If someone helped you today, pay it forward. Help Someone Else!
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество

I am having macbook air recently my iphotos did not open and was showing report apple and reopen but i came to know that by pressing alt and iphotos i open an new photo library and stored the pics but now how can i get the pics which i had in the earlier

i am having macbook air recently my iphotos did not open and was showing report apple and reopen but i came to know that by pressing alt and iphotos i open an new photo library and stored the pics but now how can i get the pics which i had in the earlier photo please help me to recover my photos

Well I'll guess you're using iPhoto 11:
Option 1
Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Repair Database. If that doesn't help, then try again, this time using Rebuild Database.
If that fails:
Option 2
Download iPhoto Library Manager and use its rebuild function. (In early versions of Library Manager it's the File -> Rebuild command. In later versions it's under the Library menu.)
This will create an entirely new library. It will then copy (or try to) your photos and all the associated metadata and versions to this new Library, and arrange it as close as it can to what you had in the damaged Library. It does this based on information it finds in the iPhoto sharing mechanism - but that means that things not shared won't be there, so no slideshows, books or calendars, for instance - but it should get all your events, albums and keywords, faces and places back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.
Regards
TD

How to capture an image from my usb camera and display on my front panel

How to capture an image from my usb camera and display on my front panel

Install NI Vision Acquisition Software and NI IMAQ for USB and open an example.
Christian

I uploaded pictures from a second camera and my iphoto created a second library, how do i get back to the first library?

I uploaded pictures from a second camera and my iphoto created a second library, how do i get back to the first library? Can anyone help?

I have no idea what you did or what happened - but I can assure you that loading from a different camera does not create a new library
So you need to supply information and someone here will assist you in sorting this out and figuring out what you really did
What version of iPhoto do you have? What version of the OS? Why do you think that a second library has been created? What do you see when you launch iPhoto with the optipon kep depressed and use the select library option? Where is your iPhoto library normally?
Anything else you can tell us that might help?
LN

I am trying to attach multiple photos to an email from my ipad 2. I can see how to do it from the camera and camera roll option,but not from the photos program. What am I missing? Thanx so much!

I am trying to attach multiple photos to an email using ipad 2. I can see how to do it using the camera and camera roll ap...
But not using the photos ap..which is where the photos are. Any help would be appreciated.!

In an album in Photos touch the Edit button and then touch the desired photos (up to 5). A blue check appears in each selected photo. Next touch the Share button at the upper left and select Mail. This starts a email with the photos attached.

How to enhance lenovo G485 camera? and how to open communicat​ions settings?

Similar Messages

Maybe you are looking for

How to enhance lenovo G485 camera? and how to open communications settings?