How to Enhance SPRO so that Config can be maintained in Production System

I have a requirement to Enhance the configuration nodes within SPRO so that the Client can directly edit specific configurations that would pose a risk to the business if they have to wait for the production release.
I have to enhance the following Node :
u2022 Advanced Planning & Optimization --> Supply Chain Planning --> Service Parts Planning (SPP) --> Monitoring --> Shortage Analysis -->Make General Settings for Shortage Analysis
u2022 Supply Network Collaboration --> Basic Settings --> Notes --> Define Reason Codes for Notes
The check box for "Current Setting" is input disabled for the above nodes in SPRO.
Please let me know if there is a SAP Note available to Enable "Current Settings" which will allow the Client to maintain settings directly in Production System.
If not , Please suggest any alternative solutions.
Thanks in Advance,
Vinit

Hi,
Your basis team should be able to help you to make changes directly in the production system.
Regards
Datta

Similar Messages

HT5312 I forget my answer of two security questions, there is a typo error in rescue email address. How to resolve this so that I can use my Apple ID for online shopping?

I forget my answer of two security questions, there is a typo error in rescue email address. How to resolve this so that I can use my Apple ID for online shopping?

You won't be able to change your rescue email address until you can answer your questions, you will need to contact Support in your country to get the questions reset.
Contacting Apple about account security : http://support.apple.com/kb/HT5699
When they've been reset you can then use the steps half-way down the HT5312 page that you posted from to correct your rescue email address for potential future use

I purchased the adobe pdf converter program, however, I am now using a new computer and I need to know how to retrieve it so that it can work on my new computer.

I purchased the adobe pdf converter program, however, I am now using a new computer and I need to know how to retrieve it so that it can work on my new computer.

What exactly did you purchase: Acrobat, or the ExportPDF / PDF Pack online service?

How to setup 9ias so that we can have different profile to cater for 2 DADs

Dear Sir,
How to setup 9ias so that we can have different profile to cater for 2 DADs with the same name pointing to different database.
For example:
/pls/users --> pointing to database 1
/pls/users --> pointing to database 2
I would like to know, how possible is it.
Reason being we would like to deploy both our live and demo plsql application on same application server without the need to change all the dad path to:
/pls/users -- pointing to database 1
/pls/usersdb2 -- pointing to database 2
In other words, we would like to preserve the same DAD name in both live and demo application to minimise unnecessary changes to application.
Please advise.
Thanks.

Follow the directions here:
http://support.apple.com/kb/ht2534

I have photoshop elements 11 installed on my desktop pc, I want to install it on my laptop as well, I read that it can be installed on two systems, but I get a message taht the redemption code has been used by another ID, please help

I have photoshop elements 11 installed on my desktop pc, I want to install it on my laptop as well, I read that it can be installed on two systems, but I get a message taht the redemption code has been used by another ID, please help

A redemption code can only be redeemed once. It is used to acquire a serial number. The serial number is what you need to activate the installed software. If you did not keep the serial number when you first installed, you might still be able to find it in your Adobe account online if you registered the software.

Using iPad mail program I have a draft of an email. I attempted to "cancel" and "delete draft" but it is still on my screen even after shutting down and restarting. How do I exit so that I can use other mail functions?

Using iPad mail program I have a draft of an email. I have attempted to "cancel" this and "delete draft" but the email stays on my screen. How can I exit this so that I can use other email functions?

Try closing the Mail app completely and see if it works properly when you re-open the app : from the home screen (i.e. not with the Mail app 'open' on-screen) double-click the home button to bring up the taskbar, then press and hold any of the apps on the taskbar for a couple of seconds or so until they start shaking, then press the '-' in the top left of the Mail app to close it, and touch any part of the screen above the taskbar so as to stop the shaking and close the taskbar.
If that doesn't work also do a reset : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.

How do I resize so that I can max and minimize the page again. I clicked on something and now can not see the ubuntu menu bar at the bottom of my screen while browser is openj

I cant resize, minimize/maximize because the top bar of the browser has disappeared and the browser window now occupies my entire screen, I can no longer tab back and forth using the ubuntu menu bar at the bottom of the screen. I have to pull down from File to quit, there is bar at the top that I can click on with my mouse. I did this accidentally and rather quickly by clicking with the mouse on something late last night, and I can't correct or even find out what I've done

My home page background has a design on it. How can I change it back to its original plain background.

Z Table which can be maintained in productional environment

How can i define a Z-table so that it is maintainable in production?

Create Table Maintenance generator for your Z table
Goto SE11 give ur table name then click Change
now goto Utilities and click Table Maintenance genrator .
Give Authorization Group,Function group and click Create icon to generate.
You need to provide SM30 authorization for the user for maintaining data in table.
Regards
Rajesh

How to Deploy OOB Webparts created in Sharepoint 2010 designer to production system

Hi,
Can anyone help me the process of deploying the OOB Webparts developed in Sharepoint 2010 designer to Production Server.
Actually i developed some OOB Webparts and Workflow using Sharepoint 2010 designer.
So, i want to move these OOB Webparts and Workflow to my Production System.
Please assist me what is the process?
Rama

Hi,
Thanks for posting your query,
There are a lot of mechanisms for doing this, but doing a simple export from your dev environment and then an import into your prod environment is probably a good place to start. You can move the whole site or just a list/library. You can do it via PowerShell
or Central Admin:
Export:
http://technet.microsoft.com/en-us/library/ee428301.aspx
Import:
http://technet.microsoft.com/en-us/library/ee428322.aspx
I hope this is helpful to you. Please mark it as
Answered. If this works
Regards,
Dharmendra Singh (MCPD-EA | MCTS )
Blog : http://sharepoint-community.net/profile/DharmendraSingh

How do I create forms that people can complete in more than one sitting i.e. save and submit?

Hi,
I have just bought formscentral and need advice to achieve my objectives:
Required:
Customer can part fill form, save and complete later on and submit for us to capture the data.
Customer can save or can access their completed form, as we need them to print it out, and physically sign a version for us for legal reasons
Several different people within the customer's business need to fill out different areas of the form, so they may need to e-mail the form bwtween each other or each logon and complete their section.
Are the above achievable? If so can I do as a web form or pdf? Are there any settings I need to apply to the form before or during creation? Are there only certain methods of distribution that will work?
Other concerns:
Our end customers are small traders that are not that computer literate and I worry that they won't have the latest adobe reader or the form won't be compatible with their Mac or firewalls etc and will struggle to be able to fill out, save and submit the forms for technical reasons. Are these concerns justified? If so, are there ways to minimise these issues?
Any guidance is much appreciated. The package also mentions it includes one to one support from Adobe - how do I access this support?
Thank you,
Rob

If a requirement is that the form be passed around to several users, I think that the PDF option is your only hope. It will indeed be a problem if users don't have Reader or some other forms-capable PDF viewer. You don't have to do anything special apart from enabling it with FormsCentral. This allows users with Reader versions prior to 11 to save the filled-in form. You'll just have to try to educate the users to use Reader (and NOT to use Preview on a Mac).

How to edit pdf so that you can save entered information in Reader?

I have Acrobat Professional 8 at home as part of Adobe CS3 but we only have acrobat reader at work.
My supervisor has an evaluation form that is setup in pdf format and has fillable information boxes such as name, job description, etc. However, you can not save the information you enter into the document. I need to know how I can alter the pdf in Pro 8 so that the information can be saved with just reader.
This is probably a simple one to those who use these programs a lot, but unfortunately I don't so I am kind of behind the learning curve here.
Any help????

When you are talking a business form, the application may be different than the original post. I would suggest you read part 15 of the AA9 EULA (license agreement) that is available from adobe.com. This is where the 500 use limit might apply.
Before you purchace AA9 for the feature, it would be wise to be sure your application would be in line with the EULA, or you will be real ticked at buying AA9 for the feature and then not being able to use it legally. You may want to indicate why you want folks to be able to save the form. If it will not be submitted, then I think you will be fine with AA9.
If it is for submission, then you may have a problem with the 500 use limit. However, saving is not needed to submit the data! The data can simply be imported to the PDF and so you don't need it in that form.

How to get around problem that you can't pass env between threads?

I get all the typical parameters in a JNI method call, but I need to display callback messages using these parameters from another thread. The main problem is saving the JNIEnv pointer for future use. How do you do that?
EX: - my C program that is turned into a dll:
static JNIEnv *m_env;
static jobject m_jobj;
first_method(JNIEnv* env, jobject jobj, ...) {
// I want to save the env and jobj globally
// so it can be used in callback
m_env = env;
m_jobj = env->NewGlobalRef(jobj);
// start the thread that generates callbacks
// callback method - called by another thread
second_method(...) {
// use the global variables to call a Java method
jclass clazz = m_env->GetObjectClass(m_jobj);
jmethodID mid = m_env->GetMethodID(clazz, ...);
jstring msg = m_env->NewStringUTF("A message");
m_env->CallVoidMethod(m_jobj, mid, msg);

You have to register each thread (there is a method.) Then there is another method (or maybe the same one) that returns the env for the thread.

Need to know how to free space so that I can download a movie?

I am trying to free storage space but no matter what i do I am not able to do so. I have 64 g on my iPad air, it that I don't have enough storage space to download a movie I have already purchased. It directs me to settings to manage storage but I can't figure out how to free more storage

How to delete content you've downloaded from the iTunes Store, App Store, iBooks Store, or Mac App Store
http://support.apple.com/kb/HT5772http://support.apple.com/kb/HT5772
How much space is used by your Other? You may be able to reduce.
How Do I Get Rid Of The “Other” Data Stored On My iPad Or iPhone?
http://tinyurl.com/85w6xwnhttp://tinyurl.com/85w6xwn
How to Remove “Other” Data from iPhone, iPad and iPod Touch
http://www.igeeksblog.com/how-to-remove-other-data-from-iphone/http://www.igeeksblog.com/how-to-remove-other-data-from-iphone/
With an iOS device, the “Other” space in iTunes is used to store things like documents, settings, caches, and a few other important items. If you sync lots of documents to apps like GoodReader, DropCopy, or anything else that reads external files, your storage use can skyrocket. With iOS 5/6/7, you can see exactly which applications are taking up the most space. Just head to Settings > General > Usage, and tap the button labeled Show All Apps. The storage section will show you the app and how much storage space it is taking up. Tap on the app name to get a description of the additional storage space being used by the app’s documents and data. You can remove the storage-hogging application and all of its data directly from this screen, or manually remove the data by opening the app. Some applications, especially those designed by Apple, will allow you to remove stored data by swiping from left to right on the item to reveal a Delete button.
 Cheers, Tom

How to certificate a Form, that i can use xfa.host.importData("");?

Hello!
I´ve got made a Form that can import an XML Document. For this feature i use the javascript function
xfa.host.importData(""); <-- empty String to open the OpenFileDialog
the form works in Adobe Acrobat Reader 7.05 fine, but now i have updated my Adobe Acrobat Reader to 7.07 and nothing happend. A first look in the JavaScript Debbuger says me, that there is an security problem. So i have searched for this problem here in the forum and found an answer that this is only working with a certificated document/form.
Is that right? I think its a bug, because why shoudt i certificate a document for Adobe Reader 7.07 and not for 7.05?
My question is, how do i certificate the Form and what do i need to configure in the adobe reader that my document is working?

[email protected] wrote:
> Eva,
>
> While it's technically possible to attach files to an XFA-PDF form (a form designed in LiveCycle Designer (XFA) and saved as a PDF document) using Acrobat Pro, for example, it's really not recommended. An XFA form saved as a PDF document really a PDF with a thin wrapper around an XFA document. When the PDF document is opened in Designer, the PDF wrapper is discarded and therefore any annotations (such as bookmarks, attachments, comments, etc.) that you might have added to the PDF document using Acrobat are lost. Fortunately, we have a great solution for this in an upcoming release but I can't really give any details on it at the moment.
>
> As far as digital signatures go, I'm not really an expert in that area so I can't speak to whether attachments get signed or not. This might be a good question to post on an Acrobat Forum
or the Reader Extension Forum
>
> Stefan
> Adobe Systems
Stefan,
I'll have to disagree with you...I don't see the use of file attachments within an XFA form as an
issue. Sure, the attachments will be discarded when you open them in Designer, but the purpose of
Designer is for designing the form template, not as a client application for
viewing/filling/distributing forms. The same could be said for form data or digital signatures...as
soon as you open up a PDF file containing saved form data in Designer, you lose that information as
well.
As far as the digital signatures go...the attachments are included as part of the information
that is signed. If you add or remove an attachment, the signature validation icon will display a
yellow exclamation mark indicating that something in the form has changed.
Justin Klei
Cardinal Solutions Group
www.cardinalsolutions.com

How do I incorporate video that EVERYONE can see? Quicktime redirect to Flash page???

I created a website for my video production company using Dreamweaver 8 (http://www.playroomcreative.com/production.html). I have average web design knowledge.
The sample videos of my work are all MP4 (H.264/AAC) which is compatible with Quicktime and Flash, however I am using JW Flash Player on my website because most people have Flash installed on their computers. I even have a message that prompts people to download the newest version of Flash when the video doesn’t appear.
My question is; what do I do about people that use iphones and ipads that can’t run Flash?
I would assume that I should change the way I have it now and put a Quicktime video embedded page FIRST, then use the “Check Plugin” Dreamweaver behavior to detect if they don’t have Quicktime and redirect them to the Flash video page. Then, if they don’t have the proper version of Flash they will be prompted to upgrade.
If I did it the opposite way (Flash page first that redirects to a Quicktime page when no Flash plugin is found) than the Flash page would never have a chance to offer it’s upgrade prompt if the user doesn’t have the proper version Flash.
Am I approaching this the right way?
Is there a better way (besides the use of YouTube or Vimeo type video hosting sites)?
Thanks in advance!

Introduction to HTML5 Video
http://dev.opera.com/articles/view/introduction-html5-video/
Building a custom HTML5 player with CSS3 and jQuery -
http://dev.opera.com/articles/view/custom-html5-video-player-with-css3-and-jquery/
"With Google recently releasing the VP8 codec, and the WebM project coming into existence. Opera, Firefox, Chrome and IE9 all have support in final builds, developer builds, or at least support announced for this format, and Flash will be able to play VP8. This means that we will soon be able to create a single version of the video that will play in the <video> element in most browsers, and the Flash Player in those that don't support WebM natively."
Video For Everybody!
http://camendesign.com/code/video_for_everybody
Nancy O.
Alt-Web Design & Publishing
Web | Graphics | Print | Media Specialists
http://alt-web.com/
http://twitter.com/altweb

How to Enhance SPRO so that Config can be maintained in Production System

Similar Messages

Maybe you are looking for