How To Enjoy Radio Economically?

I have searched and read various threads on here about using radio on BB.
I would like to listen to UK radio stations on my 8520. Most of the time I'm in my home office or car and tend to listen to the radio 15 hours per day but not, as yet, on the BB.
I have a 500Mb data allowance which, due to my use of wifi for the most part, I will not be using. During normal times ie not on holiday, the time I may want to use the BB to listen to the radio would be 3 hours per week. My question therefore has 3 parts.
1) Which is the best free app for the 8520 for UK radio enjoyment?
2) What data usage is likely to be incurred? Per hour or whatever you know your experience to be.
3) If taking your recommendation for an app, hou long would my data plan last before incurring additional cost?
I currently pay Orange UK £30/month plus VAT which includes free landline calls at all times and I do not want to increase this cost as I believe Orange are somewhat richer than I am
Blackberry Best Advice - Back-up weekly
If I have helped you please check the "Kudos" star on the right >>>>

The one I use is called Tune In Radio. Its great and gives you basically all UK radio stations. You just click on the city name and all the stations in that city are listed. As for cost? Well I remember seeing somewhere when I was installing it that is uses up to 100 mb per hour. I could be wrong about this. But I use this app quite a lot and it only has been using 30 mb per hour on average. I have a Curve 3G 9300 but my wife has the 8520 and has it installed on hers too and she finds the same. Hope this helps

Similar Messages

  • How do I connect to radio stations for free automatic afternoon or evening of my favorite music? Do I  forget about it on laptop, and plan to only enjoy radio music off my iMac desktop??

    Radio streaming is my preferred music system on desktop Mac OSX, but new birthday MacBook Pro does not understand this. So, I send this message from laptop, while listening to desktop. Please tell me how to get radio station lists on this laptop. I do not download, or purchase music -- only listen to it while doing other things (housework, art, journaling, and currently -- caregiving to 70-lb Toller/Retriever who busted his left rear knee.....).
    Please help -- my stress level does not need further elevation!
    Corkrin901

    Have you looked at iTunes>Radio?
    Ciao.

  • How to develop most economical source in BMM layer

    how to develop most economical source in logical table under BMM layrer->Logical Source

    Hi
    I have tried the below option , but it did not work . PS_D_PERSON
    PERSON_ID is char type in the data base oracle , and it is defined as varchar on the physical layer .
    So the table is loaded with space , i am not able to remove the space using trim both
    Thanks
    Sridhar.N

  • How to define RADIO BUTTONS in MODULE POOL PROG.?

    Hi Experts,
    I need to keep the RADIO BUTTONS in 1000_screen of my_module_pool prog., like,
    I hv 2 fields in this screen, as expected, the first shuld hv DEFAULT selection.
    So, I just simply, dragged & dropped 2 radio buttons from left menu of the screen builder & given them the  names as
    R_SUMMARY
    R_DETAIL
    Then i executed the transaction, but, these above 2 fields are getting selected, as default??
    I know that, if its a REPORT prog. we can define as w/ a GROUP, then the 1st one is hv the default selection.
    so,
    1  - How to define RADIO BUTTONS in this screen of a module pool prog.
    2 - How to use these names in the prog.(PAI - i guess)?
    thanq
    Edited by: Srinivas on Jul 12, 2008 11:59 PM

    Hi Srinivas,
    Please check this link
    Re: urgent:Regd radio buttons in module pool
    http://saplab.blogspot.com/2007/10/sample-abap-program-for-module-pool_18.html
    http://****************/Tutorials/ABAP/Checkbox/page1.htm
    http://****************/Tutorials/ABAP/Checkbox/page2.htm
    Best regards,
    raam

  • How to keep radio stations out of a smart playlist?

    how to keep radio stations out of a smart playlist

    A cleaner solution is to create a playlist with your running albums, then update the other smart playlists with "Playlist" not in "Running Albums".
    That way, you don't need to update each and every playlist when you add a new running album, you just need to put it in the Running Albums playlist.

  • How to edit radio station  in itunes 12

    how to edit radio station  in itunes 12

    Hi Erick dc,
    Welcome to the Apple Support Communities!
    Please refer to the Create and modify stations and Edit your stations sections of the attached article for information on editing your iTunes Radio stations. 
    Use iTunes Radio on your computer, iPhone, iPad, iPod touch, or Apple TV - Apple Support
    Have a great day,
    Joe

  • How To Install Radio In My Iphone 4S ?

    Dear Sir,
    I have use iPhone 4S
    first i install 7.0.3 and music icon show radio
    i am touch radio but not show propar
    so i close apps and re start
    and this time no show radio
    show pls tall me how to show radio & play,

    Are you in the US? If not, you won't have Radio. Currently, US only.

  • How to disable radio on the AP

    need help on how to disable radio on the AP 1140 from NCS script .
    Thank you
    Ambuj

    Well... When I say scripting its not really a script language I use for this. It's an excel spreadsheet that I build and use it at our company that is a spreadsheet that you collect information and it populates the WLC config and AP config. So we scan in all the AP's serial and MAC address and this allows use to rename them from the default, set location. IP address, h-reap mapping, all the info to completely configure an AP. So since I have the ap name, I also have configuration to enable/disable radios and or admin status.
    This is how I "script it" cut and paste. So when we are done priming the AP's they mount it and we have no other configurations to do. I update this almost every week to add features or fix formulas that I have enters wrong. I can do up to 4000 AP's and 20 WLC and can easily add to this. Well at least it's easy for me.
    Sent from Cisco Technical Support iPhone App

  • How to create radio button in reports

    Hi Friends,
    Can any body please tell how to create radio button in reports.
    Thanks,
    Nagendra

    Hi Nagendra,
        But why do u need a single radio button, any specific reason...
      try this
    REPORT  ZCHA1.
    PARAMETERS : P_RAD1 RADIOBUTTON GROUP RAD,
                 P_RAD2 RADIOBUTTON GROUP RAD.
    AT SELECTION-SCREEN OUTPUT.
      LOOP AT SCREEN.
        IF SCREEN-NAME = 'P_RAD2'.
          SCREEN-INVISIBLE = '1'.
          MODIFY SCREEN.
        ENDIF.
      ENDLOOP.

  • How i activate radio in my iphone 3gs

    sir,
    how i activate radio on my iphone 3gs?

    Type this into google...   App Store iPhone Radio Apps

  • How to create radio button between two slection screen

    hello all.
    could you please guide me how to create radio button between two SELECTION-SCREEN  in screen painter.
    Thank you,
    srinivas

    hi
    SEE THIS CODE
    REPORT  ZNNR_REPORT NO STANDARD PAGE HEADING MESSAGE-ID ZNNR LINE-SIZE 100 LINE-COUNT 65(4).
    ******DATA DECLARATIONS**********
    DATA : BEGIN OF IT_PLANT OCCURS 0,
            MATNR LIKE MARA-MATNR,
            WERKS LIKE MARC-WERKS,
            PSTAT LIKE MARC-PSTAT,
            EKGRP LIKE MARC-EKGRP,
           END OF IT_PLANT.
    DATA : BEGIN OF IT_PONO OCCURS 0,
            EBELN LIKE EKKO-EBELN,
            EBELP LIKE EKPO-EBELP,
            MATNR LIKE EKPO-MATNR,
            WERKS LIKE EKPO-WERKS,
            LGORT LIKE EKPO-LGORT,
           END OF IT_PONO.
    TABLES EKKO.
    ********END OF DATA DECLARATIONS*********
    ********SELECTION SCREEN DESIGN ***********
    SELECTION-SCREEN BEGIN OF BLOCK B1 WITH FRAME TITLE TEXT-001.
    PARAMETER : P_WERKS LIKE MARC-WERKS MODIF ID S1.
    SELECT-OPTIONS : S_EBELN FOR EKKO-EBELN NO INTERVALS MODIF ID S2.
    SELECTION-SCREEN END OF BLOCK B1.
    SELECTION-SCREEN BEGIN OF LINE.
    PARAMETERS : R3 RADIOBUTTON GROUP G2 DEFAULT 'X'.
    SELECTION-SCREEN COMMENT 5(20) TEXT-003 FOR FIELD R3.
    SELECTION-SCREEN END OF LINE.
    SELECTION-SCREEN BEGIN OF LINE.
    PARAMETERS : R4 RADIOBUTTON GROUP G2.
    SELECTION-SCREEN COMMENT 5(20) TEXT-004 FOR FIELD R4.
    SELECTION-SCREEN END OF LINE.
    SELECTION-SCREEN BEGIN OF BLOCK B2 WITH FRAME TITLE TEXT-004.
    SELECTION-SCREEN BEGIN OF LINE.
    PARAMETERS : R1 RADIOBUTTON GROUP G1 DEFAULT 'X'.
    SELECTION-SCREEN COMMENT 5(20) TEXT-002 FOR FIELD R1.
    SELECTION-SCREEN END OF LINE.
    SELECTION-SCREEN BEGIN OF LINE.
    PARAMETERS : R2 RADIOBUTTON GROUP G1.
    SELECTION-SCREEN COMMENT 5(20) TEXT-003 FOR FIELD R2.
    SELECTION-SCREEN END OF LINE.
    SELECTION-SCREEN END OF BLOCK B2.
    ******END OF SELECTION SCREEN DESIGN****************
    <b>rEWARD IF USEFULL</b>

  • How to install radio fm

    how to install radio fm

    iPhones don't have FM radio receivers (and never will).  You can install many apps that stream radio stations over the internet.

  • How to restore radio streams-

    i doubled clicked one of the triangles and the category disappeared

    karol wrote:
    I'm sorry, looks like the Banshee Wiki is disabled at the moment.
    Arch wiki should cover everything Arch-specific and some other things *users find useful*. Arch specific means pacman, not Banshee. Do you know how do you write a wiki? You search for the relevant information and put it in there yourself, so that others could benefit. You've noticed that the wiki is lacking info about how to play radio streams in Banshee or Exaile. Great, go and find that info (read the FAQ on Banshee's site, google, read MLs) and be sure put a nice HOWTO into the Arch wiki when you find the answer.
    Radio streams don't play in Exaile either. It does show that it's playing but no sound.
    Doesn't  anybody here use Exaile or Banshee?
    I can play the streams going to radiocrazy.ch or somafm.com and then opening them with VLC.
    Why would it play that way and not throught one of the other programs?

  • How to get radio behavior for multiple embedded movies on a single page?

    Hi,
    I've got a single XHTML page with multiple embedded movie objects. The movies all play fine. I would like to convert the page to achieve a radio-style behavior for the movies so only one is running at any time. That is, if I click on a movie that's not running, the movie that is running will stop before the new movie begins. Any ideas on how this can be achieved? This might be more of a javascript question, but I was hoping somebody might have already done something similar. Thanks.
    Paul

    Roy,
    It's an ugly solution but you can always add a hidden dummy structure item or KF and add all variables in the first executed query in the workbook.
    - Find the query that has the most of the infobjects used in the other queries.
    - Make sure this query is executed first in WB by removing/adding it in WB.
    - Create the hidden dummy KF and add all the extra variables to this KF.
    Solution usually works fine for me, but its not really feasible if the queries are have to many different infoobjects.
    BR //Joakim

  • HT1918 How to find radio in iTunes on my iPad 2 with iOs 7.0.2?????????

    I just bought itPad 2 but I can't find online radio in iTunes??? Where is it? How to activate? Why it's not there??

    Please see the  More Like This  section on the right.

Maybe you are looking for

  • Quota credit on 1st of calendar year for existing employees and for new joinees on prorata basis

    Dear All, we are having an issue in quota generation, where casual leave quota should get credited on 1st of every calendar year and for mid month joiners on prorate basis. If we select calendar year it is crediting on 31st of calendar year, but we n

  • Cant install new pse 9 actions

    I have tried to install a number of free actions and have placed them in C:\ Program Data\ Adobe\Photoshop Elements\9.0\Photo Creations\Photo Effects with no avail....help!

  • Media Card Reader

    Pavilion 17 Notebook. Brand new. Windows 8.1. Tried to copy pictures from a Memory Stick Duo (in adaptor) but computer does not load or show drive in My Computer when Memory Stick is inserted.

  • IPad apple I'd not working

    Hi Why doesn't the iPad accept my apple I'd but my laptop does? Apple can not help me, waiting for iTunes to respond. Resetting, syncing and updating has no affect. iTunes issue apparently? Any advice would be helpful - brand new iPad yesterday

  • Import Project Structure (Business Blueprint) into Solution Manager

    Hi, we are searching for a way to import a project or process structure from external formats like MS Visio, BPML, XML into Solman SOLAR01. I think there should be a possibility via XML. Anybody knows how to import xml-files into SolMan Blueprint and