How to ensure FundCenter selection = blank when running FM drilldown report

How to ensure blank value in the "Funds Center" selection parameter when running FM drilldown report 2FMB40* (Assigned Funds Report)?
We tried to save a report variant with protected blank value in the "&0FICTR" variable (hierarchy node), and we also used FMEV to turn-off default value for this variable. However, during report execution it still takes value from the user parameter "FIS".
To prevent the system from using "FIS", we can only save the report variant with Funds Center = * (or the top-most node). Unfortunately, these would give different extraction results which we do not want.
Any advice how to get round this?

Referring SAP Note 390953, I don't know how to apply the solution of "using generic symbol # as an initial value"....
(1) I tried to save a report variant with # in the Funds Center field, but got error message "no matching funds center found" and couldn't proceed.
(2) I also tried tcode FMEV to set the variables &0FICTR, &0FICTRA ... with default value # (in table TKESV), yet still got no effect ... as user parameter "FIS" was adopted during report execution.
Any further suggestion please?

Similar Messages

Getting the MDX query select error when running a webi report on BI query

Getting the following error when running a webi report on BI query :
A database error occured. The database error text is: The MDX query SELECT { [Measures].[D8JBFK099LLUVNLO7JY49FJKU] } ON COLUMNS , NON EMPTY [ZCOMPCODE].[LEVEL01].MEMBERS ON ROWS FROM [ZTEST_CUB/REP_20100723200521] failed to execute with the error Unknown error. (WIS 10901).
I have gone through many threads related to this error. But not able find the steps to follow for resoultion.
Please help in this regard.
Thanks,
Jeethender

The Fix Pack is also for Client Tools--it is a separate download. Please see the text below for ADAPT01255422
ADAPT01255422
Description:
Web Intelligence generates an incorrect MDX statement when a characteristic and a prompt are used.
The following database error happens: "The MDX query ... failed to execute with the error
Unknown error (WIS 10901)."
New Behavior:
This problem is resolved.
This information is also available in the Fixed Issues document for any Fix Pack greater than 2.2.

How to disable save button on selection screen (1000) run from other report

Hi Experts,
Can any one let me know how to disable save button on selection screen (1000) run from other report.
Say I am running from report R1 which submits report R2, but the save button should be disabled on
report R2(selection screen 100).
Thanks in advance.
Regards
RP.

Hi RPReddy16 ,
Try this:
DATA :BEGIN OF t_extab occurs 0,
fcode like rsmpe-func,
END OF t_extab.
REFRESH T_EXTAB.
MOVE 'SAVE' TO T_EXTAB-FCODE.
APPEND T_EXTAB.
CLEAR T_EXTAB.
SET PF-STATUS 'STATUS' EXCLUDING T_EXTAB.
Regards,
José

How to automatically open selected docs when turn on computer?

How to open automatically selected docs when turn on computer? (Text Edit docs particularly, and others)
I wist not that I must tediously select and open my same usual documents one by one, each time I turn on computer to work.
I either have to find my usual documents under "File/OpenRecent"
&/or search through the FINDER for them.
I wonder if anybody else has every had this problem before, and found a solution?
Has modern technology advanced to the point where this can be done automatically?
(Now it just occurred to me that
I could put my 'usual documents' (or Alias) into a separate Envelope
in the finder, and
then select them all at once and click to Open all at the same time.
But is that the best or only solution?)
There's a grateful thank you, two (2) "Helpful's", and 1 "Solver" award to be given out. Good luck.

Cool. Coolidge, indeed. So wise.
You ARE "THE SOLVER"
& entitled to all the rights and privileges accorded therein.
Sincere Thank yous, also,
oh, and Kudos to you.

StageWebView(useNative = true) displays a blank when running on Mac OS if renderMode is set to direct or gpu

Dear Adobe AIR Team,
I've already submitted the bug report, and it's already got 10 votes and counting:
Bug#3829934 - StageWebView displays a blank when running on Mac OS if renderMode is set to direct or gpu
Please take 5 minutes of your time to look at this bug, thanks so much!
DarkStone
2014-09-24

Despite the fact that changing hostnames after the machine is booted is not a great idea, you're making it hard for yourself.
NetBoot already has the ability to set hostnames for each client. There's a clue in Apple's Knowledgebase Article on the subject, as well as in the Mac OS X Server manuals, namely:
Optional: Click Sharing Prefs and in the Computer Name field, type the name that the NetBoot or Network Install client gets after installation or booting. Note: Each client will have its computer name and local hostname set to the name you supplied plus the MAC address (without the colons) of the client. Note: Alternatively, type the path to a tab-delimited .txt or .rtf file that has a list of MAC addresses and their corresponding computer names and local hostnames. Each client will get the name that corresponds to its MAC address in the specified file.
So you just need to build a .txt file map of MAC addresses to hostnames, then point your NetBoot image to that.

Error has occurred when running internal order report

Error has occurred when running internal order report. Last month also used this report without any error.
Error #01: [ASE Error SQL422]Too many nested expressions or logical operators to compile. Try splitting query or limiting ANDs and ORs.
Error #02: SQL Error: 422
Error #03: An error occurred while reading the data; Navigation is possible.
Please guide me to solve this issue.

Please just say how you removed the CC version and did you remove the Preferences from Hidden User>Library??
https://helpx.adobe.com/lightroom/kb/preference-file-locations-lightroom-41.html
In here??
Sorry I'm trying to help but please answer the questions specifically... thanks.

How can I make signature darker when I print the report?

I need to put my manager's signature on the report. The signature is too light, How can I make it darker when I print the report?
I used file link and OLE, both did't make it.
Thanks.

No way to do it directly in the report. You need to work with signature image file using any graphic software to increase its contrast. The easiest probably would be to use Paintbrush and change the image to black-and-white, then save back as jpeg file.

How to disable the reminding dialog when close the webi report viewer

Dear all
How to disable the reminding dialog when close the webi report viewer
Background
When user close the webi report viewer in inforview by click the button in the right-top of the webi report viewer frame. It always prompt a dialog to remind user that the modification will be lost without saving.
But customer need to disable this dialog, and can clost the report viewer directly.
So is there any ways to modify this?
I think it shoule modify some .js file under tomcat, but can not find the solution.
Thanks a lot, any information woulde be appreciated.
David Zhang

I've had the same issue bugging me since installing Snow, er, lion, er, cat, er, cougar, er, Mountain Lion. Incredibly ANNOYING.
It's stupid stuff like this and reverse scrolling that really turn long-timer users off. I'm personally glad Forstall got fired for blunders such as these.
I'm serious peeved that turning off iCloud Documents & Data actually deletes documents and data locally. That's just incredibly stupid.
MANY thanks mende1 for the answer on how to fix it.

Win 7 automation error when running crystal 10 reports

I am getting automation and memory type errors when running crystal 10 reports through a VB6 application on WIN 7 32 bit PC...
does not happen on all win7 PCs, in fact, the reporting will work for a time and then errors, but once getting the errors, seems like the reports will not run again.

Honestly, not a clue. I've never even thought of putting CR 10 (designer or runtime) on WIN 7. Now I assume this is not CR 10.5 (bundles with .NET 2008).
See [this|https://wiki.sdn.sap.com/wiki/pages/viewpage.action?pageId=56787567] wiki.
Ludek

When the page will be load how to make the page blank in run time

Dear
when i will run the page the fields shoud come with blank Field.
i want to make it in runtime.
example- i have one page having employees data. but when i will run that page the data will not come only blank fields should come, after thar i will create.

duplicate how to make the page blank field in runtime

How to avoid IE pop-ups when running BIP reports(w/ SSO) from Oracle Forms?

Hi all,
We have an OID/SSO integrated Oracle Forms and BI Publisher environment in place. We/users expect the same behavior when running Oracle Reports or BIP reports from Oracle Forms... which means receiving no intermediate pop-ups and simply getting the report output to appear in the relevant target application(PDF, EXCEL, etc). Currently we get multiple security warnings when running BIP reports from Oracle Forms.
Here's a list of Pop-ups contents:
1. "File Download - Security Warning" Do you want to open or save this file? -> OPEN
2. "File Download" Do you want to save this file? Name = ma01r500.pdf -> YES
3. "Save AS" -> pick desktop and save.
4. "Download Complete" -> OPEN
We have experimented with setting various IE security settings to LOW/enabled and still get these pop-ups.
Any suggestions is much appreciated.
Thanks,
Yahya

FYI... Metalink Note 282996.1 has resolved the bigger issue with the extra pop-ups with SSO enabled environment.
Cause:
Internet Explorer (IE) has to cache PDF files in a temporary directory prior to opening the file. Without this IE cannot process PDF files. With SSO protected pages, the header cache settings are set to no-cache which prevents IE from downloading PDF files.
Solution:
In mod_osso.conf use the entry "OssoSendCacheHeaders off" which tells mod_osso to turn off all no-cache related headers, which the enables Internet Explorer to be cache the file in a temporary directory.
Now I am not sure if anybody has any thoughts/suggestions as how we might be able to resolve this issue where Oracle Reports WEB.SHOW_DOCUMENT calls have no pop-ups so ideally BIP reports WEB.SHOW_DOCUMENT calls should behave the same as both are calls from Oracle Forms.
But at least now our SSO enabled environment and un-secure DEV/UAT behave the same with a single pop-up. Ideally the users shouldn't have to come across this intermediate pop-up to open(save/cancel being the other options) the document(just like Oracle Reports calls).
Yahya

How restet field-content selection-screen when I return to screen 1

Hi!
My case!
0) Abap report pgm with selection-screen fields.
1) I have a screen where the user send in information in
   X fields.
2) The content is shown as an ALV list.
3) Table will be updated.
4) Return to first screen where screen-output has been
   set to zero.
5) <b>HOW DO I CLEAR THE REAL CONTENT OF THEESE FIELDS?
   WHERE CAN I SEE THE CONTENT?</b> When I debug they are ' '.
Please give me some input. The content is somewhere but I don't know where ...
Regards Christina

For example, see this progam, I enter values in the selection screen, and execute, after displaying the list, I hit Back, and the selection screen comes with no values.
report zrich_0001.
parameters: p_chk1 type c,
            p_chk2 type c,
            p_chk3 type c.
start-of-selection.
write:/ p_chk1, p_chk2, p_chk3.
free memory.
Welcome to SDN! Please be sure to award points for helpful answers and mark your post as solved when solved completely. Thanks.
Regards,
Rich Heilman

ABAP dump when running an ALV report in a portal

Hi,
I have an ABAP report created in SAP R/3 4.7. Am using the ALV function module REUSE_ALV_GRID_DISPLAY to display the output. The programs runs correctly when run in R/3 using the SAP GUI.
When the report is run in the portal, I get a runtime error 'MESSAGE_TYPE_X'.
Please let me know if anybody has faced such issues.
I checked the OSS note 702732 which talks about increasing the threshold value of the start parameter. But this is not agreed by the BASIS team.
Thanks,
Best regards,
Ajith
The ST22 error log is as follows:
What happened?
The current application program detected a situation which really
should not occur. Therefore, a termination with a short dump was
triggered on purpose by the key word MESSAGE (type X).
What can you do?
Print out the error message (using the "Print" function)
and make a note of the actions and input that caused the
error.
To resolve the problem, contact your SAP system administrator.
You can use transaction ST22 (ABAP Dump Analysis) to view and administer
termination messages, especially those beyond their normal deletion
date.
Error analysis
Short text of error message:
Data volume (84.550.400 bytes) is too large. (abap/alvgrid/size_nodod_mb
Technical information about the message:
Diagnosis
     You tried to send a data record to the front-end that contains
     84.550.400 bytes. However, the data volume is restricted to
     52.428.800 bytes.
System Response
     The running application program was terminated with a runtime
     error.
Procedure
     Restrict the data selection if possible or contact your system
     administrator.
Procedure for System Administration
     You can set the maximum size of these data volumes using the kernel
     parameter 'abap/alvgrid/size_nodod_mb' (in megabytes).
Message classe...... "S>"
Number.............. 890
Variable 1.......... "84.550.400"
Variable 2.......... "52.428.800"
Variable 3.......... " "
Variable 4.......... " "
How to correct the error
Probably the only way to eliminate the error is to correct the program.
You may able to find an interim solution to the problem
in the SAP note system. If you have access to the note system yourself,
use the following search criteria:
"MESSAGE_TYPE_X" C
"SAPLAWRT" or "LAWRTU22"
"ITS_CHECK_ALV_DATA_SIZE"
If you cannot solve the problem yourself, please send the
following documents to SAP:
1. A hard copy print describing the problem.
   To obtain this, select the "Print" function on the current screen.
2. A suitable hardcopy prinout of the system log.
   To obtain this, call the system log with Transaction SM21
   and select the "Print" function to print out the relevant
   part.
3. If the programs are your own programs or modified SAP programs,
   supply the source code.
   To do this, you can either use the "PRINT" command in the editor or
   print the programs using the report RSINCL00.
4. Details regarding the conditions under which the error occurred
   or which actions and input led to the error.
Information on where terminated
The termination occurred in the ABAP program "SAPLAWRT" in
"ITS_CHECK_ALV_DATA_SIZE".
The main program was "Z_BW_RECON_INV_RPT ".
The termination occurred in line 25 of the source code of the (Include)
program "LAWRTU22"
of the source code of program "LAWRTU22" (when calling the editor 250).
Source code extract
000010   FUNCTION ITS_CHECK_ALV_DATA_SIZE.
000020   *"
000030   ""Lokale Schnittstelle:
000040   *" IMPORTING
000050   *"     REFERENCE(DATA_TABLE) TYPE TABLE
000060   *"
000070
000080     data n type i.
000090     data currsize type i.
000100     statics maxsize type i.
000110     data par_value(56).
000120     if maxsize is initial.
000130       sy-subrc = 0.
000140       CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'abap/alvgrid/size_nodod_MB'
000150                           id 'VALUE' field par_value.
000160       if sy-subrc ne 0.
000170         maxsize = 52428800.       " Default 50 MB
000180       else.
000190         maxsize = 1048576 * par_value.
000200       endif.
000210     endif.
000220     describe table data_table lines n.
000230     currsize = sy-tfill * sy-tleng.
000240     if currsize gt maxsize.
     >       message x890(s>) with currsize maxsize.
000260     endif.
000270   ENDFUNCTION.

HI,
This is a Memory problem.
System is allocated with a Max Memory of 50 MB,(see the dump code, in the last it is hardcoded in the std code)
The data of your report is coming around 83 MB.
Restrict your selection criteria of the Object and run the same report and see. it will work.
Regards,
Anji

SAP B1 Closes when Running the Crystal Report

Hi SAP Expert,
I have a problem during running the customized report i've created in Crystal. I created a stored procedure please see my code below. The Crystal Report is running during development but when i exported to SAP B1 and run the report. The SAP Business One will terminated. Any help please...
CREATE PROCEDURE [dbo].[SP_ACTUALPURCHASESV3]
     -- Add the parameters for the stored procedure here
     @FROM DATETIME,
     @TO DATETIME
AS
BEGIN
     SET NOCOUNT ON;
     SET @FROM = CAST(CAST(MONTH(@FROM) AS NVARCHAR) + '/' +
                    CAST(DAY(@FROM) AS NVARCHAR) + '/' +
                    CAST(YEAR(@FROM) AS NVARCHAR) + ' 00:00:00:000' AS DATETIME)
     SET @TO = CAST(CAST(MONTH(@TO) AS NVARCHAR) + '/' +
                    CAST(DAY(@TO) AS NVARCHAR) + '/' +
                    CAST(YEAR(@TO) AS NVARCHAR) + ' 23:59:59:000' AS DATETIME)
     SELECT
          (SELECT DocEntry FROM OPOR WHERE OPOR.DocNum = PDN1.BaseRef) as PODocentry,
          PDN1.BaseRef AS PONum,
          OPDN.DocEntry,
          OPDN.DocNum,
          OPDN.DocType,
          (select ocrd.lictradnum from ocrd where ocrd.cardcode = opdn.CardCode) as LicTradNum,
          OPDN.CardCode,
          OPDN.CardName,
          OPDN.DocDate,
          CASE WHEN PDN1.WhsCode IS NULL THEN PDN1.AcctCode ELSE PDN1.WhsCode END AS WhsCode,
          CASE WHEN PDN1.WhsCode IS NULL THEN (SELECT OACT.AcctName FROM OACT WHERE OACT.AcctCode = PDN1.AcctCode) ELSE (select OWHS.WhsName from OWHS where OWHS.WhsCode = PDN1.WhsCode) END AS WhsName,
          CASE WHEN PDN1.ItemCode IS NULL THEN 'N/A' ELSE PDN1.ItemCode END AS ITEMCODE,
          PDN1.Dscription,
          PDN1.Quantity,
          PDN1.unitMsr,
          PDN1.Price,
          PDN1.PriceBefDi,
          PDN1.PriceAfVAT,
          CRD4.WTCode,
          OWHT.RATE,
          (case when pdn1.quantity > 0 then (pdn1.Price * pdn1.Quantity) else PDN1.Price end ) * (OWHT.rate/100) as EWTVALUE
     FROM OPDN JOIN PDN1 ON OPDN.DOCENTRY = PDN1.DOCENTRY left join CRD4 on OPDN.CardCode = CRD4.CardCode left join OWHT on OWHT.WTCode = CRD4.WTCode
     WHERE OPDN.DocDate BETWEEN @FROM AND @TO and OPDN.CANCELED = 'N'
     --WHERE OPDN.DocNum = 2542
     ORDER BY OPDN.DocDate
END

Hi,
Does it means we are allowed to create stored Procedure inside the Company Database. We only use selecting and joining tables and somehow some complex sql procedures to meet our requirements.
Thanks, but my question is if there's nothing wrong with it why my SAP B1 Closes when previewing the Crystal Report. Im running on Windows 7 64-bit, i will not imagine that the capacity of memory of my Terminal Unit is not enough because my memory is 8GB. I run crystal report but it shows the record, but when running the Cystal Viewer inside SAP B1 it illegally terminated.
Thanks for clarifying the creation of Stored Procedure.
Ben

How to hide some select-option of Logical Database in report?

How to hide select-option of Logical Database in report?eg . In Logical Database 'PNP' , my code is 'GET PERNR' , excute the report , select-screen is displayed . I want to hide some select-options , such as PNPPERNR-LOW .
Edited by: rongrong wang on Mar 26, 2008 9:31 AM

U need to write code in initialization as
initialization.
loop at screen.
if screen-name = 'PNPPERNR-LOW'.
screen-active = '0'.
modify screen.
endif.
if screen-name = 'PNPPERNR-HIGH'.
screen-active = '0'.
modify screen.
endif.
endloop.

How to ensure FundCenter selection = blank when running FM drilldown report

Similar Messages

Maybe you are looking for