How to enter a returnable packaging material during inbound delivery?

Hi,
How do you add a returnable packaging material from vendor as a line item in the inbound delivery? When I try to add a LEIH type material as a line item in the inbound delivery (VL32N), the following error is displayed:
"No item category exists (Table T184L EL VERP ELP)"
Thanking you in advance,
Sreelakshmi

HI.
Please reffer the below link.
ERROR : No item category exists (Table T184L LB VERP )
Error while creating I/B delivery: No item category exists (Table T184L EL)
1) EL = is the delivery type you are using for Returns to Vendors
2) VERP = is the Item Category Group in the material master of
3) ELP= Item Usage
You have to add the missing configuration as follow:
IMGLogistics ExecutionShippingDeliveriesDefine Item Category
Determination in Deliveries(Transaction 0184).
Create a new entry or copy from an existing one for VERP. NOTE: The Delivery Item Category RLLN is the standard defined by SAP, be
sure you enter the one defined in you company.
Thanking you

Similar Messages

How to trace Returnable packaging material pending with the Customer.

Hello Everyone,
In case of Returnable packaging,
Is there any standard procedure, by which system can give you number of returnable packaging material with the custome.
Client's requirement is to have number of pallets with the customer on the Invoice.
Regards
Trupti Deulkar

hi,
1.Returnable packging issue has a special stock indicator which will show in the Inventor stock with whom the returnable packging material lies in MMBE.
Follow the link
http://help.sap.com/saphelp_46c/helpdata/en/dd/560051545a11d1a7020000e829fd11/content.htm
Thanks
Shekar

Material type for Vendors Returnable packaging material

Dear all,
I have a scenario where in i am recieving co2 gas from my vendor against a PO.
He is supplying it with cylinders i want to keep track of the cylinders and afetr using the gas want to return the cylinder to vendor.
Now the doubt arises, under which material type should I create this cylinder.
Doubt 1
I thougt of creating under the material type : LEIH, but this material type also contains the purchasing, accounting, sales view and same time in the config of the material type LEIH, value updating is not ticked, which is making me confuse.
Doubt 2
What I felt is, LEIH should be used for the our owns company returnable packaging material , which will go to the customer , but again for this also, these material should be valuated, since they belongs to our own stock , so why in standard SAP, value updation is not there.
Doubt 3
Keeping above 2 points in mind, what should be material type for vendor's returnable packaging material , where I want only qty tracking.
Regards
Nitin

You can copy LEIH and create your own Materia Type say ZLEI. For this material type you can have only General Plant / Storage Data1 view enabled.
Remember, there are 2 materials here:
1. Gas
2. Returnable packaging (cylinder)
You can receive gas on unit basis if you dont want exact tracking (ie in KG). Use any procurement material type.
When you create the PO only mainitan Gas as the material.
When you do the goods receipt against this PO, Click on RTP button, this will create a new line item, automatically and will suggest movement type 501+M. Here enter the no. of cylinders.
You will be able to track the movement of cylinders.

Sales of returnable packaging material

Dear Experts,
Greetings!
My issue is how do I make a sell of returnable packing material? We are receiving the materials in forms of Bales(packagint unit).Now with those bales we get a wires as well.We may say it is a "Bailing wire".How do i get those bailing wire in stock so that I can sell it to the customer?
Plz advice.
Best Rgds
Nitin

I can understand the process, I just asked what this has to do with returnable packaging?
you dont have to return this to the vendors, you dont expect it returned from your customer. So why is it returnable packaging then?
I would not use returnable packaging material type for at least 2 reasons: it is a material type for a speical process in SAP, and you confuse the users putting materials in that material type but using then a different process.
In general you can sell anything. The big question is just how you want the material to be in your system.
should it be stock managed or not? should it be valuated or not.
if stock managed, then you have to create the stock yourself as you never ordered it. this can be done either with 501 movement, or as already mentioned by others with 202 movement, (561, 552 and inventory movement 70* are as well possible)

Enter chapter id for material during MIGO

Hi,
While doing MIGO for STO system is giving following error.
Enter chapter id for material during MIGO.But i have maintained chapter id and material combination in J1ID and also Excise duty
rates but when i enter excise invoice no in header only for one particular item chapter id is missing and some times chapter id is coming but AED, BED and SED (duties) are not being calculated.
Please do needful ASAP.
Thanks,
Santosh.

Hi
1) Check your chapter ID for supplying Plant It should be same as receiving plant in J1ID
2) I think at the time of outgoing excise invoice you have not maintain chapter Id for material of supplying plant ,later you maintain at time of MIGo thats why error is coming even you have maintain chapter Id in J1ID now
3) check your outgoing excise invoice document in table J_1IEXCHDR in t-code se16n
Regards
kailas Ugale

Enter item vategory or material during GR

Hi WM Gurus
I am getting an error "enter item category or material" while posting GR for Inbound delivery. But I have maintained item category in matreial master as well. the material is handling unit managed. is there any config settings to be done
Regards
Gayatri

Hi
I have done inbound delivery for a material and Packing material with HU being generated during inbound delivery. Then if I do GR with reference to the Inbound delivery and when i try to post I am getting the error "Enter material or item category".

Returnable packaging Material Flow

Hi,
I have setup Item Cateogry Grp as ZLEI (Copy of LEIH).
In the Delivery Item Cateogry determination, setup Item Cateogry ZZAL
(Copy of ZTAL) for delivery type ZLF and Item Cateogry Group ZLEI.
Completed the relevant settings for the determination of the returnable
packaging material in delivery through the packaging material type.
Still when I am picking the HU in my delivery, I am not able to get the
returnable packaging materials in my delivery after TO confirmation.
But if I change the Item Cateogry Group in material master as LEIH, it
works and I see my returnable packing materials in delivery.
Can somebody please advise why I am not able to use ZLEI (Copy of LEIH) item
cateogry group for determination of return materials in delivery.
Regards,
Harsh

Harsh,
The error is not in Item category group LEIH to ZLEI, it is in the item category From TAL to ZTAL.
Redo it slowly, the moment you copy TAL to ZTAL click tick mark then copy controls screen will apppear accept it by clicking ok.
Then Check Assignemnt of sales Document to item category check whether you are using the item category group you have created and item category assignemnt.
Check... Revert for Clarification
Regards
Sathya

Inspection lot problem during inbound delivery

Hi,
I am facing following issue during inbound delivery.
I have activated inspection type 01 in material master for a packing material. Created a PO for the material through ME21N. PO created. Now I am creating inbound delivery through VL31N with reference to PO no and vendor. When I am entering the storage location I am getting the below error..
Upon investigating the issue system is creating the inspection lot
But inspection lot is not showing in QA32/QA02.
checked various threads but not of much use. I am not able to proceed further.
Kindly help.
Thanks
Kumar

Hi Kumar,
Plz check in PO history, if GRN is done. If yes then plz check in GRN quantity tab, if inspection lot is created. IN QA32, in dynamic selection enter the inspection lot and click on 'select all inspection lot' and check if it is created in system. If lot is prepared then as per the error message someone from your department must be processing it.
In Your inbound delivery screen check your tab status overview if it is A: GR not made or C: GR completed.
Also during inbound delivery storage location is picked up in inbound delivery automatically from PO you need not to enter it again.
Plz check else post screen shot of PO history and QA32.
Regards,
Priti.

How to make Classfication entry pop up at Inbound delivery VL31N?

Dear All
I need to have the characteristics values of the class assigned to my material POP UP during the Batch Creation in Inbound Delivery (VL31N)
I have activated the necessary config and the batch number is able to generated successfully. However, the characteristic value does not pop up to ask me for entry.
I have also tried to make the characteristic value as Required Entry but it still does not pop up to ask me for entry, instead it just shows a general message as follows:
Status changed: missing values for required chars in EFASH12Z 0000001053
Message no. CL500
Diagnosis
You want to save an allocation to a class with released status. However, the class contains characteristics for which an entry is required.
System Response
The system changes the status of the allocation to incomplete.
Procedure
If you want to save the allocation with released status, first you must assign values to all the required characteristics. Then you can set the status you require.
Please advise. Thanks.
Point will be rewarded handsomely.
Edited by: Daimos on Nov 3, 2008 9:43 AM

Dear all
Hi, I have maintained the value as 3: Batch Installation, Classificaiton and SLED Check in the config
SPRO > Logistics Execution > Shipping > Deliveries > Define Batch Creation Controls in Inbound Deliveries. However, the Inbound Delivery VL31N are able to create batch but not able to create classification.
Batch Creation of Inbound Delivery (as shown follows) allows us to create batch during inbound delivery.
[Batch Creation of Inbound Delivery|http://img512.imageshack.us/img512/5332/inbounddeliverywithclasqd5.jpg]
However, Classification of this Material does not pop up as follows, and there is no Button to click for classification:
http://img512.imageshack.us/img51[classificaiton Tab not appeared at all|http://img512.imageshack.us/img512/2995/inbounddeliverywithclaslh5.jpg/]
Full marks will be awarded beautifully.
Thanks

Please Help me How write the BDC program for the MIGO inbound Delivery

Please help me how to write bdc program for the MIGO Inbound Delivery in 4.7EE Version. Please help me.
Not in LSMW. Required call transaction or Session Method. Please help me.
Mohan

Run transaction BAPI . Select Logistics Execution/Shipping/InboundDelivery/SaveReplica.. You can use function module BAPI_INB_DELIVERY_SAVEREPLICA in your ABAP program.

Add material to Inbound Delivery

Dear SAP Guru,
I have a question from my client.
As for Transfer Order creation, we used Inbound Delivery as reference document. But in some cases when the material arrived from Vendor, some materials are not in the Inbound Delivery.
Can we add a new material to Inbound Delivery and the material is reference to Purchase Order Line Item as Predesessor Data.
Thanks in advanced for any reply
Best Regards,
Sugiharto

Hi,
From a business point of view, you dont want this:
the vendor just ships stuff that you've never ordered and you just allow this;
even if you agree to keep the stuff, the vendor will send an invoice for this and without a PO, you dont have a reference;
The normal process would be, put the stuff in the 902, check whether you want to keep the stuff or not and add the materials to the PO and create an additional inbound delivery. You could also do a GR in blocked stock for this.
But in case you really wna this, go to customizing of the delivery type and set there that there is no need for a reference to a PO. This will allow you to add items or create inbound deliveries without reference to a PO.
MdZ

Issue with Message Type Triggering during Inbound Delivery Creation

Hi Experts,
Hi Experts,
Currently we are facing issue with message type triggering during inbound delivery creation:
In NACE transaction for Inbound delivery we have 3 custom output types:
Pricing Procedure Used is standard one -> E10001
Z140 Inbound Delivery Create (This should get triggered when IB delivery is created)
Z141 Inbound Delivery Change (This should get triggered when IB Delivery is changed)
Z142 Inbound Delivery Delete(This should get triggered when IB Delivery is deleted).
At present if i check delivery in VL33 -> Extras -> Delivery Output
Both Z140 and Z141 are being triggered during IB delivery creation. While it should be only Z140.
Could you please suggest that are we missing any configuration in SPRO or we need to create any custom routine (requirement) to handle this?
Thanks

Hi,
There is no fine-tuned control for inbound delivery messages as for Purchase order. Hence I guess to meet your above requirement, you have to go for a custom solution similar to the PO fine tune control settings.
Thanks,

Returnable Package material

Hi Friends,
Need your help,
We purchase oil in drum and per pallet can hold 4 drums, after usage of oil we will send few drums and pallets back to vendor.
Questions I have :
Assumption :
1 Drum = 100 Lts
1. Do I need to create PO for Oil, drums and pallet, because while making receipt for 10,000 Lts of oil, system must understand I have received 100 drums and 25 pallets, there must not be any manual intervention in the process.
2. While returning, how I can handle partial return of empty Drums and pallets.
Thanks in Advance,
Ravi

Hi,
You can use HUM for this purpose.
In the inbound delivery based on your settings and master data system can:
- automatically pack the main items
- generate the packaging material items (drum & pallet in your case)
- post them to stock during GR.
You can achieve this by the use of nested handling unit (oil --> drum --> pallet).
http://help.sap.com/erp2005_ehp_04/helpdata/EN/09/4b2268d27211d3b4f7006094b9b9dd/frameset.htm
http://help.sap.com/erp2005_ehp_04/helpdata/EN/0e/b5d25ba71211d2b44e006094b9b9dd/frameset.htm
Regards,
Csaba

Inspection type for customer return of returnable package material

Hi Guys,
I send the returnable package to the customer , while reciving that material to my stock (when the customer return to me ) i want to create outbound delivery with out order refference .
I want system to create inspection lot after doing PGR of the outbound delivery .
The inspection lot sould have the option of result recording and stock posting when i do usage decission
This requirement not met by inspection type 06 , i want to create new inspection type to met above mentioned all requirement .
please provide the steps to be performed to met the same.
Thanks and regards
Thamizhchelvan G

Hi,
The 06 - Inspection type is not stock relevant and also it is not possible to change because it is SAP std.
1. If you want inspection for Customer with stock, active 05 - Inspection type in Material Master, and move the stock from customer return to QI by using MB1B with Movement type 457 Stock transfer returns to QI. After that system will create the Inspection lot in 05 Inspection type.
2. If don't want stock for inspection and directly post to Unrestricted using MB1B with movement type 453 Transfer posting to returns from customer to Unrest.
3. Customer return to Blocked stock using MB1B with mvt type 459 Stock transfer returns to blocked
Case2.
Inspection type 05 is a stock relevant inspection type.
To use 05 you must assign the 05 inspection type to the delivery item in configuration.
Follow this path.
Tcode vov6 - there will be schedule line category DN.
go to details of DN.In Business data, check which movement type is assigned here.
I think in your case it will be 651.
Change it to 655 and try now.
hope it will work.
Thanks
Vinay

How to enter initial balance for material with moving average price

We have an issue where the customer wants to split one material into three materials. We are thinking of posting goods issue for the original material and post goods receipt for the new three materials. But how to enter the initial balance since these three materials must have moving average price.

Hi,
If you create material first time in system with the help of MM01 then specify the price this will gets affect on moving price.
and if the material is created with ZERO price then use the option MR21 which is said by Jürgen
Reagrds
Sandesh

How to enter a returnable packaging material during inbound delivery?

Similar Messages

Maybe you are looking for