How to enter BIOS and boot menu on Satellite C50-A-1GZ?

Hi,
that is, how can I start the BIOS and the boot menu of my Toshiba C50-A-1GZ?
Thank you

Hi
At first you must perform complete shutdown. How to do this you can read on http://aps2.toshiba-tro.de/kb0/TSB2B03EY0002R01.htm
Restart your notebook and press F12. There you should find setup options for BIOS settings.

Similar Messages

  • Z87-G45 will not boot unless I enter BIOS or boot menu

    Hi,
    I v got some problem with my Z87 - unless I enter BIOS or boot menu(F11), I v got error message "Reboot and select proper boot device....".
    When I enter BIOS(or boot menu), and dont change anything, exit&save it boots just OK.
    The boot priority is simply the OS drive as 1st and everything else disabled. Every single driver is up to date (using supplied live uptade for board (v1.7 bios), and official inter drivers for OS drive (intel SSD), sound, graphics,... everything). Nothing but mouse, keyboard and LCD is connected to the PC. No DVDs inserted, no USB flash drives. Win7 64-bit clean(except drivers ofc) installation.
    Any ideas what might be the problem?

    Quote from: ondrej.byrtus on 09-May-14, 01:57:58
    Hi,
    I v got some problem with my Z87 - unless I enter BIOS or boot menu(F11), I v got error message "Reboot and select proper boot device....".
    When I enter BIOS(or boot menu), and dont change anything, exit&save it boots just OK.
    The boot priority is simply the OS drive as 1st and everything else disabled. Every single driver is up to date (using supplied live uptade for board (v1.7 bios), and official inter drivers for OS drive (intel SSD), sound, graphics,... everything). Nothing but mouse, keyboard and LCD is connected to the PC. No DVDs inserted, no USB flash drives. Win7 64-bit clean(except drivers ofc) installation.
    Any ideas what might be the problem?
    I am under the impression that this not a fresh build...did you remove recently any drives....do you have dual boot....?

  • How to enter bios and install multiple OS

    I just bought a HP Envy 700 430 QE.  I can't even get into my BIOS to change the order of boot and set  up new hard drives.  I have an OCZ 240 \GB PCI SSD and two Samsung SSDs.  On my old Gateway, I could press Del to get into Bios and then F12 to select the hard drive I wanted. How do I get into the BIOS on this HP and can I set it u p like I had my old Gateway where I could  pick anyone of  four drives to boot  up? rayboyusmc

    Use the ESC after power on to bring up the Startup menu then F10 as recommended by Mumbodog.  ----------------------------- BTW ---- Unplug the original boot drive until after the other OS is installed.

  • How to enter BIOS in e450

    Just got this laptop.
    Can't enter BIOS. NO F1-F12 keys.
    On start up, it just gives Lenovo splash screen then boots windows 8. I am clicking F1 (also tried FN+F1) and nothing happens.
    How to enter bios...
    Thank you
    Solved!
    Go to Solution.

    Hi jimmyr, welcome to the forum.
         Please see this link, and it should answer the question for you.
    http://blog.lenovo.com/en/blog/how-to-enter-the-bios-setup-utility-or-boot-menu-with-windows-8-1/
    Cheers
    DragonRider
    I'm DO'ing IT
    Lenovo Y470 085525U 2nd generation Intel® Core™ i7-2630QM processor ( 2.00GHz 1333MHz 6MB )
    IdeaCentre A520 Intel® Core™ i5-3230M processor ( 2.60GHz 2600MHz 3MB )
    YOGA Tablet 2 Pro-1380F
    X1 Carbon 2nd Gen (20A8) ThinkPad + T420

  • U310 encrypted w/ PGP WDE can't get to BIOS or boot menu

    The Lenovo U310 Touch was encrypted using PGP Symantec Encryption Desktop 10.3.2. Everything seemed to work fine until I used a windows 7 repair CD to restore an older system image back to this drive. 
    Now when the ideapad starts up, I still get a symentec encryption username and passphrase screen. When enter in the username and passphrase, I get past it but I see Windows Boot Manager, Windows failed to start. Statux 0xc000000f and then anything that I do, I get thrown back to the PGP screen, and this error screen.
    If I use Fn+f12, or Fn+f2, or Fn+f11, I again and thrown back to the PGP screen.
    If I shut the system off, and start it with the novo button, I see a menu that says Normal startup, bios setup, boot menu, system recovery. All 4 options return me back to the PGP Encryption screen, and then back to Windows Failed to start. 
    How can I get to the BIOS, or sys recovery, or even boot from external CD drive so I can get a clean build of an OS?

    Welllllllllllllllllllllllllllllllllllll llll, the thing was booting so fast I never caught the real problem.  (Almost ashamed, since I used to do this in a former life 20 years ago).  The keyboard was DOA.
    I finally caught it when I quit looking at the screen trying to syncronize hitting keys.  No lights flashed on the keyboard. 
    Since I don't have spare anything here, I took it down to my friends office, plugged into his old (WIN  98!!) machine and got a "bad or missing keyboard" at boot.  Off to Wally World for a terrible, cheap HP KB that got it going.
    Once I got everything going, I now have a new issue (hijack my own thread).  BSOD with two different errors.
    Thanks to all.  It was one of those "until 4 A.M." things for me.
    Seth

  • How to enter BIOS settings on Satellite U200?

    How can I enter BIOS menu before windows started?
    When notebook starts, I push F2 so it give me chose device which need to read.
    In my other pc I push DEL and BIOS is there.
    I have Satellite U200. I se software called <TOSHIBA HWSetup> and there write BIOS version 1.10.04/03/2004
    There must be key to allow enter BIOS settings.
    In user??s manuals I didn??t find information about entering BIOS settings.
    [email protected]

    Hi
    To enter BIOS settings please press ESC button at start up. After that press F1.
    By the way: when you start notebook for a short moment you can see the message how to enter BIOS settings. It is displayer at the bottom left side at start up.
    Del button will be used on desktops, not on laptops.
    Bye

  • How to enter BIOS on new Satellite L300?

    Hi
    Just bought today.... I am anxious to install other operating systems but can't figure how to enter BIOS to enable it to boot from CD.
    Any help appreciated
    Daka

    Hi.
    Have you read the User Manual? I think it will be somewhere in the book. However, for this gen, you can access BIOS by F2 and boot up list with F12
    Enjoy.

  • How to enter bios pavilion dv7

    I cannot figure out how to enter bios on my pavilion dv7-1135NR, i need to figure out how to change boot order!

    Tash2000 wrote:
    I have installed a new motherboard into my HP Pavilion.
    I have tried to update the BIOS for this motherboard and since doing this it is not possible to change the sata controller mode from RAID to anything ese - it will not save the settings.
    I have replaced the CMOS battery and changed the CMOS jumper but nothing has worked. Can anyone provide the original BIOS file so I can try and re-flash it?
    Or does anyone have any other suggestion?
    Many thanks
    Hello Tash2000.
    What is the product number for your computer?
    Please click the white star under my name to give me Kudos as a way to say "Thanks!"
    Click the "Accept as Solution" button if I resolve your issue.

  • How to enter BIOS settings on Equium L10?

    Please can someone tell me what button i press too get into the bios setup at the start when i switch my pc on cos i have tried every thing, but nothing works.

    Hello
    Every time when you switch the notebook ON you can see at the bottom left hand site the short instruction how to enter BIOS settings. In your case you must use F2 button. Please keep it down immediately after switching the notebook ON.
    Generally the Toshiba notebooks are delivered with two different BIOS versions (BIOS producer):
    - TOSHIBA BIOS: enter using ESC and F1 button
    - Phoenix BIOS: enter using F2 button.
    According the specification your unit has Phoenix BIOS.
    Bye

  • How to enter bios Setup (not the F1 stuff, the splash screen display settings)

    So I some how got into a seperate bios setting program by pressing ctrl S when some other bios utility was loading and changed the splash screen display (how long it shows the press enter stuff)
    but now I have no idea how to get back into that configruator.
    the Manual doesn't mention it, so question, how do I bloody do it?
    T430S 2542 btw

    Hello
    Every time when you switch the notebook ON you can see at the bottom left hand site the short instruction how to enter BIOS settings. In your case you must use F2 button. Please keep it down immediately after switching the notebook ON.
    Generally the Toshiba notebooks are delivered with two different BIOS versions (BIOS producer):
    - TOSHIBA BIOS: enter using ESC and F1 button
    - Phoenix BIOS: enter using F2 button.
    According the specification your unit has Phoenix BIOS.
    Bye

  • Need help with how to reset bios and admin password to reformat hard drive in 8440p elitebook.......

    need help with how to reset bios and admin password to reformat hard drive in 8440p elitebook? removal of cmos, resetting laptop, using cccleaner, windows password recovery and hiren's was noneffective, any help is appreciated. thanks

    Hi,
    As your notebook is a business class machine, security is more stringent - the password is stored in non-volatile memory and there are no 'backdoor' passwords.  Your best option would be to contact HP regarding this.
    Regards,
    DP-K
    ****Click the White thumb to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    ****I don't work for HP****
    Microsoft MVP - Windows Experience

  • How to enter bios, disable onboard sound, and install a sound card

    How do I enter bios, disable onboard sound, and install a sound card?

    Hi,
    You may also have to disable, security for the PCIE x1 slot.
    Windows 8.1 - Accessing the UEFI (BIOS) Setup
    Regrads

  • How to enter BIOS at my P7010 and another problem

    I have a Portege 7010 CT. What is the keyboard key to enter in bios? Cause I tried F1 F2 ecc but when I start my pc pushing the button it doesnt work .
    Second problem: I ask u this thing cause I had a problem. I installed Virtual Cd 7 and I created a virtual cd (d:) when I start my pc a white text appears: no starter disk insert disk and push a button. What can I do thanx

    Hi,
    for entering BIOS you have to press ESC directly after pressing power button!
    I have no experience with virtual CD but I use a tool called Daemon tools. With this tool you can use a hdd based CD image as normal CD during Windows!
    Try it you will find it at google
    Tanya

  • How to enter ICH5R RAID SETUP MENU?

    It is said USE "CTRL+I" enter ICH5R RAID SETUP MENU,but when my computer boot up , there only show press "CTRL+F" for promise 378 raid setup,not "CTRL+I"
    even you press "CTRL+I" for many times,when computer is power on,it is nothing happen. If you don't install S-ATA harddisk ,you may not enter ICH5R RAID SETUP MENU? isn't it?
    I can use "CTRL+F" enter promise 378 raid setup menu,and how can I enter ICH5R RAID SETUP MENU as the explanatory book said??

    In BIOS set S-ATA as RAID, after that you will be able to enter the ICH5R-BIOS with ctrl+I. It appears after the promise BIOS.

  • How to enter BIOS settings on my Satellite 5205-S503?

    Ok I have a Satellite 5205t -S503. I want to boot using CD so it can install my WXP disc but it will not let me boot from the CD and I cant get to the BIOS.
    I tried the ESC F1 and it just says: set value (Y/N)
    When I type Y it just restarts and goes right back to the Toshiba screen.
    When I type N it says: NTLDR is missing press key to restart.
    When I also try the ESC with the power button it does the same thing.
    How can I get to the bios /and or boot from CD ?

    Hi
    As Im not mistaken the Satellite 52xx series was equipped with the Toshiba BIOS and the ESC button should works to access the BIOS default settings.
    Anyway, there is also another possibility to boot from the CD drive.
    You can press the F12 button immediately after notebook starting and then a boot menu should appear. Then you could choose the ODD as a booting source.
    But back to the error message NTLDR is missing press key to restart
    It looks like an HDD malfunction
    I have searched a little bit in the forum and found these useful threads:
    http://forums.computers.toshiba-europe.com/forums/message.jspa?messageID=88471
    Hopefully it helps
    Please report if you were successful
    Good luck

Maybe you are looking for

  • CS4 Problem with Acrobatinfo.exe

    I'm having a really obnoxious problem with CS4 (as far as I can tell, every part of it, tested with InDesign, Acrobat, Illustrator and Photoshop). Every time I open an Adobe application and every 30 second to 3 minutes thereafter, my system hangs for

  • HT2534 How to edit my phone no.for iMessage

    Please help guys my iMessage is not working I used to put two phone nos when I made an apple id account N now I'm not using the other one but the other one is not working and I don't know how to delete the other no fr other account because I don't re

  • Sql developer only showing package header not package body

    I have set up users with debug any procedure, debug connect session on 2 databases both 9.2.0.5. When execute is granted on another users package 1 database displays both the header and body the other database displays just the header. I can't find a

  • Ultiroute says "Check user authorization"

    My Ultiroute has suddenly started giving me a "Please check your User Authorization" error message when I try to route a board. Ultiboard runs fine, the internal rip-up router seems to be OK, but Ultiroute won't run any more. I can't find any way of

  • SocialMiner bulk transcript export

    Does someone knows if you can export all chat transcripts on Social Miner 10.6(1) in bulk? Thanks Alex