How to enter BIOS at my P7010 and another problem

I have a Portege 7010 CT. What is the keyboard key to enter in bios? Cause I tried F1 F2 ecc but when I start my pc pushing the button it doesnt work .
Second problem: I ask u this thing cause I had a problem. I installed Virtual Cd 7 and I created a virtual cd (d:) when I start my pc a white text appears: no starter disk insert disk and push a button. What can I do thanx

Hi,
for entering BIOS you have to press ESC directly after pressing power button!
I have no experience with virtual CD but I use a tool called Daemon tools. With this tool you can use a hdd based CD image as normal CD during Windows!
Try it you will find it at google
Tanya

Similar Messages

How to enter bios, disable onboard sound, and install a sound card

How do I enter bios, disable onboard sound, and install a sound card?

Hi,
You may also have to disable, security for the PCIE x1 slot.
Windows 8.1 - Accessing the UEFI (BIOS) Setup
Regrads

How to enter BIOS in e450

Just got this laptop.
Can't enter BIOS. NO F1-F12 keys.
On start up, it just gives Lenovo splash screen then boots windows 8. I am clicking F1 (also tried FN+F1) and nothing happens.
How to enter bios...
Thank you
Solved!
Go to Solution.

Hi jimmyr, welcome to the forum.
Please see this link, and it should answer the question for you.
http://blog.lenovo.com/en/blog/how-to-enter-the-bios-setup-utility-or-boot-menu-with-windows-8-1/
Cheers
DragonRider
I'm DO'ing IT
Lenovo Y470 085525U 2nd generation Intel® Core™ i7-2630QM processor ( 2.00GHz 1333MHz 6MB )
IdeaCentre A520 Intel® Core™ i5-3230M processor ( 2.60GHz 2600MHz 3MB )
YOGA Tablet 2 Pro-1380F
X1 Carbon 2nd Gen (20A8) ThinkPad + T420

How to enter BIOS settings on Equium L10?

Please can someone tell me what button i press too get into the bios setup at the start when i switch my pc on cos i have tried every thing, but nothing works.

Hello
Every time when you switch the notebook ON you can see at the bottom left hand site the short instruction how to enter BIOS settings. In your case you must use F2 button. Please keep it down immediately after switching the notebook ON.
Generally the Toshiba notebooks are delivered with two different BIOS versions (BIOS producer):
- TOSHIBA BIOS: enter using ESC and F1 button
- Phoenix BIOS: enter using F2 button.
According the specification your unit has Phoenix BIOS.
Bye

How to enter bios Setup (not the F1 stuff, the splash screen display settings)

So I some how got into a seperate bios setting program by pressing ctrl S when some other bios utility was loading and changed the splash screen display (how long it shows the press enter stuff)
but now I have no idea how to get back into that configruator.
the Manual doesn't mention it, so question, how do I bloody do it?
T430S 2542 btw

Hello
Every time when you switch the notebook ON you can see at the bottom left hand site the short instruction how to enter BIOS settings. In your case you must use F2 button. Please keep it down immediately after switching the notebook ON.
Generally the Toshiba notebooks are delivered with two different BIOS versions (BIOS producer):
- TOSHIBA BIOS: enter using ESC and F1 button
- Phoenix BIOS: enter using F2 button.
According the specification your unit has Phoenix BIOS.
Bye

How to enter BIOS settings on Satellite U200?

How can I enter BIOS menu before windows started?
When notebook starts, I push F2 so it give me chose device which need to read.
In my other pc I push DEL and BIOS is there.
I have Satellite U200. I se software called <TOSHIBA HWSetup> and there write BIOS version 1.10.04/03/2004
There must be key to allow enter BIOS settings.
In user??s manuals I didn??t find information about entering BIOS settings.
[email protected]

Hi
To enter BIOS settings please press ESC button at start up. After that press F1.
By the way: when you start notebook for a short moment you can see the message how to enter BIOS settings. It is displayer at the bottom left side at start up.
Del button will be used on desktops, not on laptops.
Bye

How to enter BIOS on new Satellite L300?

Hi
Just bought today.... I am anxious to install other operating systems but can't figure how to enter BIOS to enable it to boot from CD.
Any help appreciated
Daka

Hi.
Have you read the User Manual? I think it will be somewhere in the book. However, for this gen, you can access BIOS by F2 and boot up list with F12
Enjoy.

How to enter bios pavilion dv7

I cannot figure out how to enter bios on my pavilion dv7-1135NR, i need to figure out how to change boot order!

Tash2000 wrote:
I have installed a new motherboard into my HP Pavilion.
I have tried to update the BIOS for this motherboard and since doing this it is not possible to change the sata controller mode from RAID to anything ese - it will not save the settings.
I have replaced the CMOS battery and changed the CMOS jumper but nothing has worked. Can anyone provide the original BIOS file so I can try and re-flash it?
Or does anyone have any other suggestion?
Many thanks
Hello Tash2000.
What is the product number for your computer?
Please click the white star under my name to give me Kudos as a way to say "Thanks!"
Click the "Accept as Solution" button if I resolve your issue.

Migo(goods reciept), -- how to enter recd. qty.in nos. and kgs. of a matl.

Take an example of steel (angles, flats, plate or so). He receives in 5nos. and 200kgs.
In goods receipt how to enter the quantity in numbers and its weight both? In item detail, Quantity,of Migo screen there are 5 rows for entry. 1. Qty. in unit of entry. In this what we enter is going to maintain in 2. Qty. in sku with respect to its base unit of measure. Here the problem comes the qty. recieved may not be to the data mentioned in units of measure in material master. In practical it is different. If we mention the quantity received same as the sku(stock keeping unit) then the qty entered is ok. 3. Qty in PO price unit. The details in this is the quantity received and its payment. 4. Qty in delivery note. We mention the qty received in delivery note which is weight. 5. Qty ordered which is picking up from PO. Please give the solution where to enter nos? Thanking you,
Srinivas

Hi gurus,
In this case, can I use the KANBAN correction to increase the KANBAN bin qty?
Thanks
Lim
Singapore

Satellite L750D - BIOS update 2.1 and sound problem

Hello
I have little problem. I have been downloaded from your website BIOS 2.1 for Toshiba Satellite L750D (PSK32E).
I have been updated BIOS to 2.1 and start problem with sound. When I start game, music or something other only 2 first minutes sound plays properly but then it stops for no reason. No sound at all. I have been reinstalled op system but the problem is still there.
Sound works for 2 minutes only then is completely off. Every start application with sound plays 2 minutes and stop all quiet is. I have made a probe on my mother laptop its a twin laptop. I have been updated bios same problem 2 minutes and then no sound. My operating system is win 8 pro 64 my mother laptop is with win 7 x64 premium.
Two BIOS updated 2.1 ver on L750D and the problem is same. Please fix BIOS.

The BIOS seems to be very old. I was released nearly 1.5 years ago so to be honest I doubt its and BIOS issue.
I had the similar issue with my other notebook equipped with an Realtek sound card.
The sound appeared again after plugging and removing the headphone jack
But i could solve this installing the newest sound driver update from Realtek driver page.
But it seems that your Satellite does not support Realtek sound chip but Conexant sound chip.
Therefore the solution might not be useful for you.
However, I think you need to update the sound driver.I recommend you to google for Conexant SmartAudio HD driver and to test the newest available driver version.
In internet I could found the Conexant SmartAudio HD Driver version 8.65.9.51 for Win 7/ Win 8 / Win 8.1
Not quite sure if this is the newest version but you can test it.
In order to manually update your driver:
1. Go to Device Manager (right click on My Computer, choose Manage and then find Device Manager in the left panel)
2. Right click on the hardware device you wish to update and choose Update Driver Software
3. Choose to select the location of the new driver manually and browse to the folder where you downloaded the driver

How to enter bios and install multiple OS

I just bought a HP Envy 700 430 QE. I can't even get into my BIOS to change the order of boot and set up new hard drives. I have an OCZ 240 \GB PCI SSD and two Samsung SSDs. On my old Gateway, I could press Del to get into Bios and then F12 to select the hard drive I wanted. How do I get into the BIOS on this HP and can I set it u p like I had my old Gateway where I could pick anyone of four drives to boot up? rayboyusmc

Use the ESC after power on to bring up the Startup menu then F10 as recommended by Mumbodog. ----------------------------- BTW ---- Unplug the original boot drive until after the other OS is installed.

How to enter bios on a Pavillon p7-1459

I am installing a new HDD and I want to install windows 8 with my recovery discs.
So ,how can i enter bios to format the new HDD and start the recovery from mi discs.
Thanks for any help.

Cucutitos, welcome to the forum.
You will not have to enter th BIOS to format the new HDD. Here is what you have to do:
System Recovery: This option reformats the system drive (usually C:\), reinstalls the original operating system, and reinstalls all the original hardware drivers and software.
Warning:If the size of the OS partition (usually C:\) was reduced below a minimum size requirement, other user-created partitions will be removed and stored data will be destroyed.
Also, here is a guide to give you further help. Make certain that the new HDD is the same size of larger than the current HDD.
Note: To enter the BIOS begin immediately tapping the "esc" key when the computer begins to boot.
Please click the "Thumbs up + button" if I have helped you and click "Accept as Solution" if your problem is solved.
Signature:
HP TouchPad - 1.2 GHz; 1 GB memory; 32 GB storage; WebOS/CyanogenMod 11(Kit Kat)
HP 10 Plus; Android-Kit Kat; 1.0 GHz Allwinner A31 ARM Cortex A7 Quad Core Processor ; 2GB RAM Memory Long: 2 GB DDR3L SDRAM (1600MHz); 16GB disable eMMC 16GB v4.51
HP Omen; i7-4710QH; 8 GB memory; 256 GB San Disk SSD; Win 8.1
HP Photosmart 7520 AIO
++++++++++++++++++
**Click the Thumbs Up+ to say 'Thanks' and the 'Accept as Solution' if I have solved your problem.**
Intelligence is God given; Wisdom is the sum of our mistakes!
I am not an HP employee.

How to enter BIOS on Qosmio G50-12Q?

Good Morning
I have a PC Qosmio G50-12Q - OS is Window Vista 32 bit
How I make to enter in the BIOS of the system ?
Which are the keys to press ?
Tank you

Hello
I asked a friend of me because he has Qosmio G50 and you have to press F2 key to enter BIOS setup.
By the way: If you press F12 you can select the boot device. Therefore its not necessary to enter the BIOS. :)

How to enter bios on a HP Envy TouchSmart 15t-j000?

I have a HP Envy TouchSmart 15t-j000 and I want to enter bios. When I restart the computer just the HP logo appears.I've tried to press ESC, F1 - F12, insert, delete, home, end... Nothing works.Do you know how I can do this?Thanks

Marius_Paval wrote:
I have a HP Envy TouchSmart 15t-j000 and I want to enter bios. When I restart the computer just the HP logo appears.I've tried to press ESC, F1 - F12, insert, delete, home, end... Nothing works.Do you know how I can do this?ThanksHi, Marius. Here is how: 1. Press the Shift key as you shut down your laptop normally.2. Wait at least 10 seconds with the laptop off.3. Press the Power button and then immediately press the ESC key on the upper left of your keyboard, about once per second. You will soon see a Recovery screen menu that instructs you to press the F10 button to go directly to your BIOS menu. Pressing the ESC key is easy to remember; that way, you don't have to memorize the other F button choices. Easy! Good luck!

How to enter BIOS mode on Satellite 5200?

Hello!
I own a Satellite 5200-801 and Ive recently bought a new CD/DVD - rom cause the original just died. The thing is that the drive I bought is from US market and my laptop is European. So Ive double checked all the serial numbers on it and everything was correct except the manufacture serial number that I suppose makes no difference to be different.
My problem is that when I install it the light indicator flashes normal but when it boots it shoes IDE error boot and windows doesnt see it at all. Do u know how can I enter BIOS setting to change master/slave cause I believe that there is a difference among them at this point....the original is master and the second is csel.
Also is there a key to enter BIOS because I cant enter at all no matter key combinations. Finally if I change the reading head of the DVD/ROM and put back the original would make the change I need?
THANKS FOR YOUR HELP!!!

As far as I know you cannot change anything in BIOS but check it again. To enter BIOS settings press ESC button at start up.
Good luck!

How to enter BIOS at my P7010 and another problem

Similar Messages

Maybe you are looking for