How to enter BIOS mode on Satellite 5200?

Hello!
I own a Satellite 5200-801 and Ive recently bought a new CD/DVD - rom cause the original just died. The thing is that the drive I bought is from US market and my laptop is European. So Ive double checked all the serial numbers on it and everything was correct except the manufacture serial number that I suppose makes no difference to be different.
My problem is that when I install it the light indicator flashes normal but when it boots it shoes IDE error boot and windows doesnt see it at all. Do u know how can I enter BIOS setting to change master/slave cause I believe that there is a difference among them at this point....the original is master and the second is csel.
Also is there a key to enter BIOS because I cant enter at all no matter key combinations. Finally if I change the reading head of the DVD/ROM and put back the original would make the change I need?
THANKS FOR YOUR HELP!!!

As far as I know you cannot change anything in BIOS but check it again. To enter BIOS settings press ESC button at start up.
Good luck!

Similar Messages

  • How to enter BIOS settings on Satellite U200?

    How can I enter BIOS menu before windows started?
    When notebook starts, I push F2 so it give me chose device which need to read.
    In my other pc I push DEL and BIOS is there.
    I have Satellite U200. I se software called <TOSHIBA HWSetup> and there write BIOS version 1.10.04/03/2004
    There must be key to allow enter BIOS settings.
    In user??s manuals I didn??t find information about entering BIOS settings.
    [email protected]

    Hi
    To enter BIOS settings please press ESC button at start up. After that press F1.
    By the way: when you start notebook for a short moment you can see the message how to enter BIOS settings. It is displayer at the bottom left side at start up.
    Del button will be used on desktops, not on laptops.
    Bye

  • How to enter BIOS on new Satellite L300?

    Hi
    Just bought today.... I am anxious to install other operating systems but can't figure how to enter BIOS to enable it to boot from CD.
    Any help appreciated
    Daka

    Hi.
    Have you read the User Manual? I think it will be somewhere in the book. However, for this gen, you can access BIOS by F2 and boot up list with F12
    Enjoy.

  • Satellite T135 How to enter Safe Mode and HDD Recovery if "F8" doesn't work

    Hello everybody
    I have a Toshiba Satellite T135 Laptop and it has recently crashed. Since then, every time I switch it on, Startup Repair automatically gets enabled. But it fails repairing the error.
    I tried to resolve the problem with System Restore, but that didn't work either. So I think I have to go through the HDD recovery procedure.
    The problem is, that I have a lot of data on my laptop that I need to safe first. I wanted to do this via Safe Mode which I supposedly should be able to enter by pressing "F8" while initializing, when the Windows logo appears. But my laptop doesn't react when I press F8, but rather begins to make a alerting sound, if I press the button for a longer time.
    Apart from how to enter safe mode when pressing F8 while initializing doesn't work, I do have a second question: Is Toshiba Recovery Wizard the equivalent for HDD Recovery Procedure? That's the only similar option I've been able to find...
    Thank you very much for your advice.

    Hi buddy,
    Yes, the Toshiba HDD recovery option will wipe the *first* partition of HDD. Thats the partition where Windows is installed so all files on this partition will be deleted to restore the original out of box settings. If you have stored the data on this partition they will be deleted but all data on second partition will not be deleted.
    You can perform a backup if you buy an external HDD case as MisterX suggested. Put the notebook HDD into this case and connect it to another computer. Then you can back up all files that you need. :)

  • How to enter bios pavilion dv7

    I cannot figure out how to enter bios on my pavilion dv7-1135NR, i need to figure out how to change boot order!

    Tash2000 wrote:
    I have installed a new motherboard into my HP Pavilion.
    I have tried to update the BIOS for this motherboard and since doing this it is not possible to change the sata controller mode from RAID to anything ese - it will not save the settings.
    I have replaced the CMOS battery and changed the CMOS jumper but nothing has worked. Can anyone provide the original BIOS file so I can try and re-flash it?
    Or does anyone have any other suggestion?
    Many thanks
    Hello Tash2000.
    What is the product number for your computer?
    Please click the white star under my name to give me Kudos as a way to say "Thanks!"
    Click the "Accept as Solution" button if I resolve your issue.

  • How to enter BIOS in e450

    Just got this laptop.
    Can't enter BIOS. NO F1-F12 keys.
    On start up, it just gives Lenovo splash screen then boots windows 8. I am clicking F1 (also tried FN+F1) and nothing happens.
    How to enter bios...
    Thank you
    Solved!
    Go to Solution.

    Hi jimmyr, welcome to the forum.
         Please see this link, and it should answer the question for you.
    http://blog.lenovo.com/en/blog/how-to-enter-the-bios-setup-utility-or-boot-menu-with-windows-8-1/
    Cheers
    DragonRider
    I'm DO'ing IT
    Lenovo Y470 085525U 2nd generation Intel® Core™ i7-2630QM processor ( 2.00GHz 1333MHz 6MB )
    IdeaCentre A520 Intel® Core™ i5-3230M processor ( 2.60GHz 2600MHz 3MB )
    YOGA Tablet 2 Pro-1380F
    X1 Carbon 2nd Gen (20A8) ThinkPad + T420

  • How to enter BIOS settings on Equium L10?

    Please can someone tell me what button i press too get into the bios setup at the start when i switch my pc on cos i have tried every thing, but nothing works.

    Hello
    Every time when you switch the notebook ON you can see at the bottom left hand site the short instruction how to enter BIOS settings. In your case you must use F2 button. Please keep it down immediately after switching the notebook ON.
    Generally the Toshiba notebooks are delivered with two different BIOS versions (BIOS producer):
    - TOSHIBA BIOS: enter using ESC and F1 button
    - Phoenix BIOS: enter using F2 button.
    According the specification your unit has Phoenix BIOS.
    Bye

  • How to enter bios Setup (not the F1 stuff, the splash screen display settings)

    So I some how got into a seperate bios setting program by pressing ctrl S when some other bios utility was loading and changed the splash screen display (how long it shows the press enter stuff)
    but now I have no idea how to get back into that configruator.
    the Manual doesn't mention it, so question, how do I bloody do it?
    T430S 2542 btw

    Hello
    Every time when you switch the notebook ON you can see at the bottom left hand site the short instruction how to enter BIOS settings. In your case you must use F2 button. Please keep it down immediately after switching the notebook ON.
    Generally the Toshiba notebooks are delivered with two different BIOS versions (BIOS producer):
    - TOSHIBA BIOS: enter using ESC and F1 button
    - Phoenix BIOS: enter using F2 button.
    According the specification your unit has Phoenix BIOS.
    Bye

  • How to enter Bios Setup Satellite 4030?

    I'm searching for Informations how to enter the Bios Setup.

    To enter BIOS settings use ESC button.

  • Satellite C55-A-19D - How to enter BIOS settings?

    Hello,
    I have recently bought a *Satellite C55-A-19D* notebook with no OS preinstalled, so I have installed Windows 8.1.
    My problem is that *I can not access to the BIOS menu*.
    I turn the computer on, but I can not see any invitation to "press the F2 key to enter setup". I am only receiving a screen that just has the +Toshiba Leading Innovation >>>+ notice, and then the Windows 8 spinning dots...
    I can tap or hold F2/F12/ESC/DEL but nothing is coming up. I have also tried to press Fn+F2 combination.
    What should I to get into the BIOS setup?
    Thanks in advance!

    Perform complete shutdown as described here - http://aps2.toshiba-tro.de/kb0/TSB2B03EY0002R01.htm
    After doing this start your notebook again and press F12. There you should have option to enter BIOS settings.
    Check it out.

  • How to install recovery image on Satellite 5200 using USB DVD drive

    Hello,
    I have this problem with a Satellite 5200-902 that has the DVD-ROM corrupt and I don't find the part to change. (model DVD: uj-810b)
    But I would like to reinstall the notebook with the CD recovery and I don't be able to enter in the BIOS for change the boot order and start with a USB DVD-ROM.
    I removed the HDD and reinstall the WXp Prof by another machine but when I restart the 5200 I read this message " errore nel caricamento del sistema operativo".
    When turn on I press F2-F10-F12 but if I select another peripheral for boot the notebook start only by network.
    Can you help me to recover this notebook by an external USB DVD-ROM?
    Thanks
    Andrea

    I have an usb floppy drive model ibm TEAC FD05pub, I think it's incompatible or the notebook don't has the power in the usb port because the led of the floppy is of.
    When I tried to press ESC + F1 in the bios I set only the date and the password but no the boot order and other function.
    I really do not know what to do and how to solve.
    I can not execute any BIOS update I can only do so because the boot from network or DVD-ROM (unfortunately broken).
    I installed the operating system by connecting the hard disk on another machine but when I go to connect to my notebook S5200 gives me error.
    Andrea

  • How to install wireless on a Satellite 5200-903?

    Due to a very bad virus I recovered Windows on a Satellite 5200-903 of a friendly businessman. But back home he saw: no wireless LAN could be used... It seems, that cause the WLAN-switch was "off" no WLAN-driver was installed/recovered...
    Now he wants to come to me again tomorrow or the day after tomorrow - and I MUST know, how to install everything until then... he also will bring me his router, so I can configure everything for him on the notebook AND router (WPA, if possible).
    But I found TWO drivers: one was a direct download of a small file of "Agere" - wlesslan-xp-7620390.zip
    The other is from "Atheros", and the download is a links to another website "Toshiba EMEA - Wireless LAN Driver Portal" http://aps2.toshiba-tro.de/wlan/?page=downloads , where I have to identify the WLAN adapter... But: on the first download-site (I mean BEFORE redirected to "Toshiba EMEA") there is at the list "Model" NOT any Satellite 5200.
    Which driver is correct? Are there different WLAN-adapters in the 5200-903 series? Is it possible to find out the adapter model BEFORE he gives me the Notebook?
    And in the list of drvers for the 5200-903 there was a download "WLAN hotkey" wlkey-xp-2003.zip ? Do I need that too? Do I need any other things?
    And does such an "older" WLAN-Access work in another way than the integrated WLAN of a centrino e.g. ? I just know how to log into a WLAN with newer notebooks: button "wireless networks" on the right buttom oft windows, then chose the WLAN name to connect and type in the key, if needed.
    Please help me, he lives 100 miles away from me and has not much time, he comes again to me just for that matter, and of course he was not amused when he returned home and couldn't connect to the internet... and he's an ABSOLUTE noob in technical things, so I cannot tell him how to do it on his own and need your help quickly.
    Thanks a lot!

    Hello Herb
    I just want to make the whole story short and simply. After installing OS install drivers for hardware components. According the notebook specification for Satellite 5200-903 it is WLAN ready model and I do not know which WLAN card is inside. You friend should have info about that.
    If there is Atheros WLAN card the right driver you can find HERE
    After driver installation install all Toshiba designed tools and utilities starting with COMMON MODULES. It must be installed at first. WLAN-hotkey utility is important because using FN+F8 key combination you can enable/disable WLAN card.
    WLAN software (Atheros WLAN client utility) is not necessary because for WLAN you can use WXP WLAN settings. You can use it if the WLAN card is activated properly.
    So I hope you will set WLAN properly and if you need more assistance please write again.
    Bye and good luck!

  • How to enter Enhancement Mode of ABAP OO Classes: Add Methods, Pre-Methods.

    Hello,
    do you know how to enter the enhancement mode of the class builder?
    I want to enhance a standard global ABAP OO class by implicit enhancements for inserting methods, attributes or pre- and post-methods - as described in  <a href="http://help.sap.com/saphelp_nw70/helpdata/en/58/4fb541d3d52d31e10000000a155106/content.htm">Online help</a>.
    I start the SE24 on my NW 7.0, but there is no menu <i>Edit-> Enhancement Operations-> Enhance Class/Interface </i> as written in <a href="http://help.sap.com/saphelp_nw70/helpdata/en/86/b83142680d5c33e10000000a155106/content.htm">Online Help</a>.
    When I press the <i>Display</i> button, there is no enhancement button (the spiral), and the sub entries of menu <i>Edit-> Enhancement Operations</i>, like <i>Insert Pre-Method</i> are inactive (gray).
    In SE80 I don't find them too. The only implicit enhancements I found are on the beginning and end of methods implementation code.
    Do you have experience enhancing classes?
    Best regards
    Michael Umlauff

    Hallo Michael,
    You first have to go in se80 or se24
    Then menu Class-> Enhance
    Then you will be able to use Edit-> Enhancement Operations-> Insert Pre-Post Methodes
    Regards,
    Walter

  • How to enter bios on a Pavillon p7-1459

    I am installing a new HDD and I want to install windows 8 with my recovery discs.
    So ,how can i enter bios to format the new HDD and start the recovery from mi discs.
    Thanks for any help.

    Cucutitos, welcome to the forum.
    You will not have to enter th BIOS to format the new HDD.  Here is what you have to do:
    System Recovery: This option reformats the system drive (usually C:\), reinstalls the original operating system, and reinstalls all the original hardware drivers and software.
     Warning:If the size of the OS partition (usually C:\) was reduced below a minimum size requirement, other user-created partitions will be removed and stored data will be destroyed.
    Also, here is a guide to give you further help.  Make certain that the new HDD is the same size of larger than the current HDD.
    Note: To enter the BIOS begin immediately tapping the "esc" key when the computer begins to boot.
    Please click the "Thumbs up + button" if I have helped you and click "Accept as Solution" if your problem is solved.
    Signature:
    HP TouchPad - 1.2 GHz; 1 GB memory; 32 GB storage; WebOS/CyanogenMod 11(Kit Kat)
    HP 10 Plus; Android-Kit Kat; 1.0 GHz Allwinner A31 ARM Cortex A7 Quad Core Processor ; 2GB RAM Memory Long: 2 GB DDR3L SDRAM (1600MHz); 16GB disable eMMC 16GB v4.51
    HP Omen; i7-4710QH; 8 GB memory; 256 GB San Disk SSD; Win 8.1
    HP Photosmart 7520 AIO
    ++++++++++++++++++
    **Click the Thumbs Up+ to say 'Thanks' and the 'Accept as Solution' if I have solved your problem.**
    Intelligence is God given; Wisdom is the sum of our mistakes!
    I am not an HP employee.

  • How to enter BIOS on Qosmio G50-12Q?

    Good Morning
    I have a PC Qosmio G50-12Q - OS is Window Vista 32 bit
    How I make to enter in the BIOS of the system ?
    Which are the keys to press ?
    Tank you

    Hello
    I asked a friend of me because he has Qosmio G50 and you have to press F2 key to enter BIOS setup.
    By the way: If you press F12 you can select the boot device. Therefore its not necessary to enter the BIOS. :)

Maybe you are looking for

  • Send Email from Alternate Address or at least Repl...

    I'm coming from the world of blackberries, so pardon my frustration.  I've tried to find a solution for this and am coming up empty.  My situation:  I have a work email, however, it is a Pop account (nothing I can do about that).  I am out of the off

  • Why Certified Freshers are not considered for Job Openings?

    Hi I am Mohan. I got certified in FI Module and updated my profile in all the job sites but I didn't got any call from any rectuiter. Why is the situation like this?

  • Outbound DID change | ring group

    1. We have CCUM 8.6, and 50 DID that are by provider tight to main number. I have one user requesting his number shows up as external line was set up on his phone.  I think I should go with different route pattern than 9.@ so for example I can choose

  • IMG - View maintenance  - View suppress existing entries and do not save

    Hi there, within the customizing maintanence I wanted to change a view cluster with an existing view (within transaction /simgh). But after replacement of the vc with the view the view do not show any existing entries and do not save my new entries.

  • Imovie keeps quitting unexpectedly

    I have successfully downloaded movies from my JVC GZ-MG20U before, to my Macbook Pro through imovie. Tried to do same today and keep getting the message "application iMovie quit unexpectedly". Not sure what's different this time? Can anyone tell me?