How to enter BIOS on Satellite Pro NB10-A-100?

Hello,
I have a Toshiba Satellite Pro NB10-A-100 laptop and I want to enter to BIOS configuration and I can't.
What is the button combination to get in?
Thanks in advance.

Perform a complete shutdown in Windows 8 - http://aps2.toshiba-tro.de/kb0/TSB2B03EY0002R01.htm
Restart your machine and try to use F2 or F12. If you use F12 there should be option to enter notebook setup settings.
Please test it and send some feedback.

Similar Messages

  • How to enter Bios Setup Satellite 4030?

    I'm searching for Informations how to enter the Bios Setup.

    To enter BIOS settings use ESC button.

  • How to recover BIOS on Satellite Pro A60?

    Hello after flash procedure update, computer do not power on. (only 3 seconds)
    How to recovery bios ?
    Sorry for my English.
    Thank you for your help.
    +English language only!+
    +Message was edited by: ADMIN+

    Sorry to hear this. Unfortunately Im afraid BIOS is screwed up and you will not be able to recover it.
    On this forum I found one interesting thread - http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=54395
    Check it out. Maybe it will help. If not Im afraid you need professional help with it.

  • Cannot enter Bios on Satellite Pro 6000

    Hello from Norway . I have a SP6000 and i have a corrupt windowsinst. I have tryed to access the Bios settins by pressing esc and then the F1 key , but it switches right back to the Toshiba welcome screen and says press f12 to select boot order....
    Is there any way to get to the bios settings ? Hmmmmmmmmmm :-) Thanks in advance

    Ok heres what i had to do to make it to boot on a cd without setting it in bios........... On startup, unplugged the harddrive when the "press F12" key appeared on startup, and put it right in again when the cd starts to spin .... i had to do this many times so it detected the drive in bios ... hehe
    Now i have a fresh copy of windows again ;)
    case closed

  • How to enter BIOS settings on Satellite U200?

    How can I enter BIOS menu before windows started?
    When notebook starts, I push F2 so it give me chose device which need to read.
    In my other pc I push DEL and BIOS is there.
    I have Satellite U200. I se software called <TOSHIBA HWSetup> and there write BIOS version 1.10.04/03/2004
    There must be key to allow enter BIOS settings.
    In user??s manuals I didn??t find information about entering BIOS settings.
    [email protected]

    Hi
    To enter BIOS settings please press ESC button at start up. After that press F1.
    By the way: when you start notebook for a short moment you can see the message how to enter BIOS settings. It is displayer at the bottom left side at start up.
    Del button will be used on desktops, not on laptops.
    Bye

  • How to enter BIOS on new Satellite L300?

    Hi
    Just bought today.... I am anxious to install other operating systems but can't figure how to enter BIOS to enable it to boot from CD.
    Any help appreciated
    Daka

    Hi.
    Have you read the User Manual? I think it will be somewhere in the book. However, for this gen, you can access BIOS by F2 and boot up list with F12
    Enjoy.

  • How to enter BIOS in e450

    Just got this laptop.
    Can't enter BIOS. NO F1-F12 keys.
    On start up, it just gives Lenovo splash screen then boots windows 8. I am clicking F1 (also tried FN+F1) and nothing happens.
    How to enter bios...
    Thank you
    Solved!
    Go to Solution.

    Hi jimmyr, welcome to the forum.
         Please see this link, and it should answer the question for you.
    http://blog.lenovo.com/en/blog/how-to-enter-the-bios-setup-utility-or-boot-menu-with-windows-8-1/
    Cheers
    DragonRider
    I'm DO'ing IT
    Lenovo Y470 085525U 2nd generation Intel® Core™ i7-2630QM processor ( 2.00GHz 1333MHz 6MB )
    IdeaCentre A520 Intel® Core™ i5-3230M processor ( 2.60GHz 2600MHz 3MB )
    YOGA Tablet 2 Pro-1380F
    X1 Carbon 2nd Gen (20A8) ThinkPad + T420

  • How to enter BIOS settings on Equium L10?

    Please can someone tell me what button i press too get into the bios setup at the start when i switch my pc on cos i have tried every thing, but nothing works.

    Hello
    Every time when you switch the notebook ON you can see at the bottom left hand site the short instruction how to enter BIOS settings. In your case you must use F2 button. Please keep it down immediately after switching the notebook ON.
    Generally the Toshiba notebooks are delivered with two different BIOS versions (BIOS producer):
    - TOSHIBA BIOS: enter using ESC and F1 button
    - Phoenix BIOS: enter using F2 button.
    According the specification your unit has Phoenix BIOS.
    Bye

  • How to enter bios Setup (not the F1 stuff, the splash screen display settings)

    So I some how got into a seperate bios setting program by pressing ctrl S when some other bios utility was loading and changed the splash screen display (how long it shows the press enter stuff)
    but now I have no idea how to get back into that configruator.
    the Manual doesn't mention it, so question, how do I bloody do it?
    T430S 2542 btw

    Hello
    Every time when you switch the notebook ON you can see at the bottom left hand site the short instruction how to enter BIOS settings. In your case you must use F2 button. Please keep it down immediately after switching the notebook ON.
    Generally the Toshiba notebooks are delivered with two different BIOS versions (BIOS producer):
    - TOSHIBA BIOS: enter using ESC and F1 button
    - Phoenix BIOS: enter using F2 button.
    According the specification your unit has Phoenix BIOS.
    Bye

  • How to enter bios pavilion dv7

    I cannot figure out how to enter bios on my pavilion dv7-1135NR, i need to figure out how to change boot order!

    Tash2000 wrote:
    I have installed a new motherboard into my HP Pavilion.
    I have tried to update the BIOS for this motherboard and since doing this it is not possible to change the sata controller mode from RAID to anything ese - it will not save the settings.
    I have replaced the CMOS battery and changed the CMOS jumper but nothing has worked. Can anyone provide the original BIOS file so I can try and re-flash it?
    Or does anyone have any other suggestion?
    Many thanks
    Hello Tash2000.
    What is the product number for your computer?
    Please click the white star under my name to give me Kudos as a way to say "Thanks!"
    Click the "Accept as Solution" button if I resolve your issue.

  • How to recover Bios on Satellite A300

    How to recover bios on satellite A300 laptop?

    > Somebody told me that the bios must have infected and asked me to rewright the bios.
    So this someone hasn't got much savvy.
    Sorry mate but this issue has nothing to do with BIOS. BIOS is saved on the ROM module the virus cannot affect the ROM module since it needs to be flashed and I dont think that this a case on your notebook.
    You just deleted something in registry?? Im afraid this is not enough to get rid of a virus
    The best solution is to format the HDD and to reinstall the system once again
    Use the recovery disk because the recover would delete all partitions and would reinstall the system, drivers and tools again

  • How to enter BIOS settings on my Satellite Pro S300?

    Hi
    It can look stupid but I'm trying to access to the BIOS menu on my TOSHIBA Satellite Pro S300-EZ1511 and i can't, i searched for that on the manual but i couldn't find anything.
    I need to go there so i can change the SATA settings to IDE so i can install windows XP system after i formatted the Vista.
    Thanks

    It should be in the Users Manual somewhere.
    Turn on the laptop, and hold down the ESC key. Then press F1 when it prompts you.

  • How to enter BIOS mode on Satellite 5200?

    Hello!
    I own a Satellite 5200-801 and Ive recently bought a new CD/DVD - rom cause the original just died. The thing is that the drive I bought is from US market and my laptop is European. So Ive double checked all the serial numbers on it and everything was correct except the manufacture serial number that I suppose makes no difference to be different.
    My problem is that when I install it the light indicator flashes normal but when it boots it shoes IDE error boot and windows doesnt see it at all. Do u know how can I enter BIOS setting to change master/slave cause I believe that there is a difference among them at this point....the original is master and the second is csel.
    Also is there a key to enter BIOS because I cant enter at all no matter key combinations. Finally if I change the reading head of the DVD/ROM and put back the original would make the change I need?
    THANKS FOR YOUR HELP!!!

    As far as I know you cannot change anything in BIOS but check it again. To enter BIOS settings press ESC button at start up.
    Good luck!

  • Satellite C55-A-19D - How to enter BIOS settings?

    Hello,
    I have recently bought a *Satellite C55-A-19D* notebook with no OS preinstalled, so I have installed Windows 8.1.
    My problem is that *I can not access to the BIOS menu*.
    I turn the computer on, but I can not see any invitation to "press the F2 key to enter setup". I am only receiving a screen that just has the +Toshiba Leading Innovation >>>+ notice, and then the Windows 8 spinning dots...
    I can tap or hold F2/F12/ESC/DEL but nothing is coming up. I have also tried to press Fn+F2 combination.
    What should I to get into the BIOS setup?
    Thanks in advance!

    Perform complete shutdown as described here - http://aps2.toshiba-tro.de/kb0/TSB2B03EY0002R01.htm
    After doing this start your notebook again and press F12. There you should have option to enter BIOS settings.
    Check it out.

  • No AHCI in BIOS in Satellite Pro A200

    I just installed an ssd and would like to change the bios utility to ahci however there isnt an area that i am able to do this. the Computer is a Toshiba Satellite Pro A200 (psfa1a-003002).
    Do I need to update the BIOS? Where do I get the update and how do I update it?

    As far as I know BIOS update doesn't offer some additional options. Please check BIOS settings again. In advanced BIOS options there should be SATA option and there you can change between compatibility and AHCI mode.
    I have it on my P200. It is almost identical machine but 17 and your is 15 model.

Maybe you are looking for