How to enter BIOS settings on Equium L10?

Please can someone tell me what button i press too get into the bios setup at the start when i switch my pc on cos i have tried every thing, but nothing works.

Hello
Every time when you switch the notebook ON you can see at the bottom left hand site the short instruction how to enter BIOS settings. In your case you must use F2 button. Please keep it down immediately after switching the notebook ON.
Generally the Toshiba notebooks are delivered with two different BIOS versions (BIOS producer):
- TOSHIBA BIOS: enter using ESC and F1 button
- Phoenix BIOS: enter using F2 button.
According the specification your unit has Phoenix BIOS.
Bye

Similar Messages

  • How to enter BIOS settings on Satellite U200?

    How can I enter BIOS menu before windows started?
    When notebook starts, I push F2 so it give me chose device which need to read.
    In my other pc I push DEL and BIOS is there.
    I have Satellite U200. I se software called <TOSHIBA HWSetup> and there write BIOS version 1.10.04/03/2004
    There must be key to allow enter BIOS settings.
    In user??s manuals I didn??t find information about entering BIOS settings.
    [email protected]

    Hi
    To enter BIOS settings please press ESC button at start up. After that press F1.
    By the way: when you start notebook for a short moment you can see the message how to enter BIOS settings. It is displayer at the bottom left side at start up.
    Del button will be used on desktops, not on laptops.
    Bye

  • Satellite C55-A-19D - How to enter BIOS settings?

    Hello,
    I have recently bought a *Satellite C55-A-19D* notebook with no OS preinstalled, so I have installed Windows 8.1.
    My problem is that *I can not access to the BIOS menu*.
    I turn the computer on, but I can not see any invitation to "press the F2 key to enter setup". I am only receiving a screen that just has the +Toshiba Leading Innovation >>>+ notice, and then the Windows 8 spinning dots...
    I can tap or hold F2/F12/ESC/DEL but nothing is coming up. I have also tried to press Fn+F2 combination.
    What should I to get into the BIOS setup?
    Thanks in advance!

    Perform complete shutdown as described here - http://aps2.toshiba-tro.de/kb0/TSB2B03EY0002R01.htm
    After doing this start your notebook again and press F12. There you should have option to enter BIOS settings.
    Check it out.

  • How to enter BIOS settings on my Satellite 5205-S503?

    Ok I have a Satellite 5205t -S503. I want to boot using CD so it can install my WXP disc but it will not let me boot from the CD and I cant get to the BIOS.
    I tried the ESC F1 and it just says: set value (Y/N)
    When I type Y it just restarts and goes right back to the Toshiba screen.
    When I type N it says: NTLDR is missing press key to restart.
    When I also try the ESC with the power button it does the same thing.
    How can I get to the bios /and or boot from CD ?

    Hi
    As Im not mistaken the Satellite 52xx series was equipped with the Toshiba BIOS and the ESC button should works to access the BIOS default settings.
    Anyway, there is also another possibility to boot from the CD drive.
    You can press the F12 button immediately after notebook starting and then a boot menu should appear. Then you could choose the ODD as a booting source.
    But back to the error message NTLDR is missing press key to restart
    It looks like an HDD malfunction
    I have searched a little bit in the forum and found these useful threads:
    http://forums.computers.toshiba-europe.com/forums/message.jspa?messageID=88471
    Hopefully it helps
    Please report if you were successful
    Good luck

  • How to enter BIOS settings on my Satellite Pro S300?

    Hi
    It can look stupid but I'm trying to access to the BIOS menu on my TOSHIBA Satellite Pro S300-EZ1511 and i can't, i searched for that on the manual but i couldn't find anything.
    I need to go there so i can change the SATA settings to IDE so i can install windows XP system after i formatted the Vista.
    Thanks

    It should be in the Users Manual somewhere.
    Turn on the laptop, and hold down the ESC key. Then press F1 when it prompts you.

  • How to enter BIOS settings on my Satellite M40?

    How can I see the BIOS in my computer? I try in the begining but I cant do it.

    Hi
    As far as I know you must keep down ESC button after you start the unit.

  • How to enter bios Setup (not the F1 stuff, the splash screen display settings)

    So I some how got into a seperate bios setting program by pressing ctrl S when some other bios utility was loading and changed the splash screen display (how long it shows the press enter stuff)
    but now I have no idea how to get back into that configruator.
    the Manual doesn't mention it, so question, how do I bloody do it?
    T430S 2542 btw

    Hello
    Every time when you switch the notebook ON you can see at the bottom left hand site the short instruction how to enter BIOS settings. In your case you must use F2 button. Please keep it down immediately after switching the notebook ON.
    Generally the Toshiba notebooks are delivered with two different BIOS versions (BIOS producer):
    - TOSHIBA BIOS: enter using ESC and F1 button
    - Phoenix BIOS: enter using F2 button.
    According the specification your unit has Phoenix BIOS.
    Bye

  • How to enter BIOS mode on Satellite 5200?

    Hello!
    I own a Satellite 5200-801 and Ive recently bought a new CD/DVD - rom cause the original just died. The thing is that the drive I bought is from US market and my laptop is European. So Ive double checked all the serial numbers on it and everything was correct except the manufacture serial number that I suppose makes no difference to be different.
    My problem is that when I install it the light indicator flashes normal but when it boots it shoes IDE error boot and windows doesnt see it at all. Do u know how can I enter BIOS setting to change master/slave cause I believe that there is a difference among them at this point....the original is master and the second is csel.
    Also is there a key to enter BIOS because I cant enter at all no matter key combinations. Finally if I change the reading head of the DVD/ROM and put back the original would make the change I need?
    THANKS FOR YOUR HELP!!!

    As far as I know you cannot change anything in BIOS but check it again. To enter BIOS settings press ESC button at start up.
    Good luck!

  • How to enter Bios Setup Satellite 4030?

    I'm searching for Informations how to enter the Bios Setup.

    To enter BIOS settings use ESC button.

  • How to enter bios pavilion dv7

    I cannot figure out how to enter bios on my pavilion dv7-1135NR, i need to figure out how to change boot order!

    Tash2000 wrote:
    I have installed a new motherboard into my HP Pavilion.
    I have tried to update the BIOS for this motherboard and since doing this it is not possible to change the sata controller mode from RAID to anything ese - it will not save the settings.
    I have replaced the CMOS battery and changed the CMOS jumper but nothing has worked. Can anyone provide the original BIOS file so I can try and re-flash it?
    Or does anyone have any other suggestion?
    Many thanks
    Hello Tash2000.
    What is the product number for your computer?
    Please click the white star under my name to give me Kudos as a way to say "Thanks!"
    Click the "Accept as Solution" button if I resolve your issue.

  • How to enter BIOS in e450

    Just got this laptop.
    Can't enter BIOS. NO F1-F12 keys.
    On start up, it just gives Lenovo splash screen then boots windows 8. I am clicking F1 (also tried FN+F1) and nothing happens.
    How to enter bios...
    Thank you
    Solved!
    Go to Solution.

    Hi jimmyr, welcome to the forum.
         Please see this link, and it should answer the question for you.
    http://blog.lenovo.com/en/blog/how-to-enter-the-bios-setup-utility-or-boot-menu-with-windows-8-1/
    Cheers
    DragonRider
    I'm DO'ing IT
    Lenovo Y470 085525U 2nd generation Intel® Core™ i7-2630QM processor ( 2.00GHz 1333MHz 6MB )
    IdeaCentre A520 Intel® Core™ i5-3230M processor ( 2.60GHz 2600MHz 3MB )
    YOGA Tablet 2 Pro-1380F
    X1 Carbon 2nd Gen (20A8) ThinkPad + T420

  • How to enter BIOS on new Satellite L300?

    Hi
    Just bought today.... I am anxious to install other operating systems but can't figure how to enter BIOS to enable it to boot from CD.
    Any help appreciated
    Daka

    Hi.
    Have you read the User Manual? I think it will be somewhere in the book. However, for this gen, you can access BIOS by F2 and boot up list with F12
    Enjoy.

  • Hp Probook 4730s" No Battery Is Detected" How to Replicate BIOS Settings ?

    How to Replicate BIOS Settings ? for hp probook 4730s ?
    my Battery Is no Detected ? after latest bios update ?? 
    F.60 Rev.A31 Mar 2015
    but i want  Replicate old BIOS
    F.40 12 Mar 2013
    to make a battery work and Detected ??
    notes : im traing more methods in web sit no success ??

    Hello @assail_hawk
    To get your issue more exposure I would suggest posting it in the commercial forums since this is a commercial product. You can do this at Commercial Forums.
    Even though this is a Commercial product, I recommend to restore the BIOS defaults with this document selecting the reloading the BIOS default settings. This will restore the original BIOS.
    Thanks.
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

  • How to enter BIOS and boot menu on Satellite C50-A-1GZ?

    Hi,
    that is, how can I start the BIOS and the boot menu of my Toshiba C50-A-1GZ?
    Thank you

    Hi
    At first you must perform complete shutdown. How to do this you can read on http://aps2.toshiba-tro.de/kb0/TSB2B03EY0002R01.htm
    Restart your notebook and press F12. There you should find setup options for BIOS settings.

  • How to enter bios on a Pavillon p7-1459

    I am installing a new HDD and I want to install windows 8 with my recovery discs.
    So ,how can i enter bios to format the new HDD and start the recovery from mi discs.
    Thanks for any help.

    Cucutitos, welcome to the forum.
    You will not have to enter th BIOS to format the new HDD.  Here is what you have to do:
    System Recovery: This option reformats the system drive (usually C:\), reinstalls the original operating system, and reinstalls all the original hardware drivers and software.
     Warning:If the size of the OS partition (usually C:\) was reduced below a minimum size requirement, other user-created partitions will be removed and stored data will be destroyed.
    Also, here is a guide to give you further help.  Make certain that the new HDD is the same size of larger than the current HDD.
    Note: To enter the BIOS begin immediately tapping the "esc" key when the computer begins to boot.
    Please click the "Thumbs up + button" if I have helped you and click "Accept as Solution" if your problem is solved.
    Signature:
    HP TouchPad - 1.2 GHz; 1 GB memory; 32 GB storage; WebOS/CyanogenMod 11(Kit Kat)
    HP 10 Plus; Android-Kit Kat; 1.0 GHz Allwinner A31 ARM Cortex A7 Quad Core Processor ; 2GB RAM Memory Long: 2 GB DDR3L SDRAM (1600MHz); 16GB disable eMMC 16GB v4.51
    HP Omen; i7-4710QH; 8 GB memory; 256 GB San Disk SSD; Win 8.1
    HP Photosmart 7520 AIO
    ++++++++++++++++++
    **Click the Thumbs Up+ to say 'Thanks' and the 'Accept as Solution' if I have solved your problem.**
    Intelligence is God given; Wisdom is the sum of our mistakes!
    I am not an HP employee.

Maybe you are looking for

  • IPod no longer connects over FireWire

    I have a 20 GB iPod with click wheel, which I think I purchased in 2004. I sync it with a Power Mac G5 dual 2.5GHz. I've never been able to sync it over USB, and according to Apple that's a known problem with this iPod and a G5...but up until a week

  • Cannot output Reports pdf directly to content area

    I have registered a report (Oracle Reports rdf) as a portal component. It is included in a content area. I can execute the report and the output file is created (pdf) - but it is not loaded automatically into the content area folder that I specified

  • CFIMAGE question

    Hello, I am using CFIMAGE to grab a dynamically generated jpg image from a internal server, converting it to a gif and then adding a watermark image on top of it using imagepaste. The code seems to work fine for one URL, but not another (the url cont

  • Movie events possible?

    I have an 'event' of movies in iPhoto. Can this be published to Web gallery? If so, how? I tried but no way did the movies upload to my iDisk. I have 20 movies, each about 20 MB. Yes, large, but they are my student projects and i want to put them onl

  • EPS Files Do Not With Correct Parent Application

    I already posted this question in the Install & Setup Forum on April 3. But no response since then. I also posted this question on the Adobe Forum. So far no response there either. I am hoping someone in this Using Mac OS X Tiger forum might be able