How to enter Bios Setup Satellite 4030?

I'm searching for Informations how to enter the Bios Setup.

To enter BIOS settings use ESC button.

Similar Messages

  • How to enter bios Setup (not the F1 stuff, the splash screen display settings)

    So I some how got into a seperate bios setting program by pressing ctrl S when some other bios utility was loading and changed the splash screen display (how long it shows the press enter stuff)
    but now I have no idea how to get back into that configruator.
    the Manual doesn't mention it, so question, how do I bloody do it?
    T430S 2542 btw

    Hello
    Every time when you switch the notebook ON you can see at the bottom left hand site the short instruction how to enter BIOS settings. In your case you must use F2 button. Please keep it down immediately after switching the notebook ON.
    Generally the Toshiba notebooks are delivered with two different BIOS versions (BIOS producer):
    - TOSHIBA BIOS: enter using ESC and F1 button
    - Phoenix BIOS: enter using F2 button.
    According the specification your unit has Phoenix BIOS.
    Bye

  • How to enter BIOS on Satellite Pro NB10-A-100?

    Hello,
    I have a Toshiba Satellite Pro NB10-A-100 laptop and I want to enter to BIOS configuration and I can't.
    What is the button combination to get in?
    Thanks in advance.

    Perform a complete shutdown in Windows 8 - http://aps2.toshiba-tro.de/kb0/TSB2B03EY0002R01.htm
    Restart your machine and try to use F2 or F12. If you use F12 there should be option to enter notebook setup settings.
    Please test it and send some feedback.

  • How to enter BIOS setup in IdeaPad S10's boot boost mode ?

    Maybe you're using hibernation? Try simply log into sytem and then shut down (not hibernate). After this maybe the issue will go away.

     AR15 wrote:I had exactly the problem you described. It happened after I told Windows to "turn off" but then immediately closed the lid (sending it to sleep instead of turning it off).  I then installed a new hard drive.  When I powered back on, the machine would no longer display the prompt to press F2 on the Lenovo POST screen.  I'm guessing that this is so the computer will resume Windows as quickly as possible. I tried removing the battery, hard drive, leaving it unplugged for a while, etc.  Nothing helped. I put in the original hard drive, resumed Windows, and did a proper shut down in Windows. When I powered back on, the F2 prompt returned!    As to what you should do...I'm guessing you too should try to boot back into Windows and do a proper shut down.  Then see if the F2 prompt returns. Let us know how you make out! my case is similar to yours, but i have reformatted the original hdd.  and i tried a shutdown and turn on, it didn't work.

  • How to enter BIOS settings on Satellite U200?

    How can I enter BIOS menu before windows started?
    When notebook starts, I push F2 so it give me chose device which need to read.
    In my other pc I push DEL and BIOS is there.
    I have Satellite U200. I se software called <TOSHIBA HWSetup> and there write BIOS version 1.10.04/03/2004
    There must be key to allow enter BIOS settings.
    In user??s manuals I didn??t find information about entering BIOS settings.
    [email protected]

    Hi
    To enter BIOS settings please press ESC button at start up. After that press F1.
    By the way: when you start notebook for a short moment you can see the message how to enter BIOS settings. It is displayer at the bottom left side at start up.
    Del button will be used on desktops, not on laptops.
    Bye

  • How to enter BIOS on new Satellite L300?

    Hi
    Just bought today.... I am anxious to install other operating systems but can't figure how to enter BIOS to enable it to boot from CD.
    Any help appreciated
    Daka

    Hi.
    Have you read the User Manual? I think it will be somewhere in the book. However, for this gen, you can access BIOS by F2 and boot up list with F12
    Enjoy.

  • How to enter BIOS in e450

    Just got this laptop.
    Can't enter BIOS. NO F1-F12 keys.
    On start up, it just gives Lenovo splash screen then boots windows 8. I am clicking F1 (also tried FN+F1) and nothing happens.
    How to enter bios...
    Thank you
    Solved!
    Go to Solution.

    Hi jimmyr, welcome to the forum.
         Please see this link, and it should answer the question for you.
    http://blog.lenovo.com/en/blog/how-to-enter-the-bios-setup-utility-or-boot-menu-with-windows-8-1/
    Cheers
    DragonRider
    I'm DO'ing IT
    Lenovo Y470 085525U 2nd generation Intel® Core™ i7-2630QM processor ( 2.00GHz 1333MHz 6MB )
    IdeaCentre A520 Intel® Core™ i5-3230M processor ( 2.60GHz 2600MHz 3MB )
    YOGA Tablet 2 Pro-1380F
    X1 Carbon 2nd Gen (20A8) ThinkPad + T420

  • How to enter BIOS settings on Equium L10?

    Please can someone tell me what button i press too get into the bios setup at the start when i switch my pc on cos i have tried every thing, but nothing works.

    Hello
    Every time when you switch the notebook ON you can see at the bottom left hand site the short instruction how to enter BIOS settings. In your case you must use F2 button. Please keep it down immediately after switching the notebook ON.
    Generally the Toshiba notebooks are delivered with two different BIOS versions (BIOS producer):
    - TOSHIBA BIOS: enter using ESC and F1 button
    - Phoenix BIOS: enter using F2 button.
    According the specification your unit has Phoenix BIOS.
    Bye

  • How to enter BIOS on Qosmio G50-12Q?

    Good Morning
    I have a PC Qosmio G50-12Q - OS is Window Vista 32 bit
    How I make to enter in the BIOS of the system ?
    Which are the keys to press ?
    Tank you

    Hello
    I asked a friend of me because he has Qosmio G50 and you have to press F2 key to enter BIOS setup.
    By the way: If you press F12 you can select the boot device. Therefore its not necessary to enter the BIOS. :)

  • MOVED: What we need - a guide on how to flash bios, setup bios, and raid

    This topic has been moved to AMD64 nVidia Based board.
    What we need - a guide on how to flash bios, setup bios, and raid

    Like How to Flash Bios NVidia 64 & Award Bios
    Syar2003 has also documented flashing methods in the Bios Collection. *Updated * 7025 1C3 EasyBIOS [r.2] thread
    BIOS Guides pretty complete as far as Neo3 250/Ultra but as none of the pps who have been involved in the stickies have neo4's that chipset is lacking.
    Raid Guide
    If any1 wants to re-write /update these please feel free to write up the topic as a new thread  thread & if popular we can add a link to the thread.
    Volunteers welcome 

  • How to Enter Bios on Toshiba E45T-B4204

    Hi, i have Toshiba E45T-B4204
    I want to enter Bios Setup, i tried Hold F2 or tap repeat F2 and it didn't work
    is there any solution for this issue?
    Thanks

    Satellite E45t-B4204
    The easiest way to enter the UEFI is from within Windows.
       Settings > Change PC settings > Update and recovery tab > Recovery tab > Restart now button > Troubleshoot > Advanced options > UEFI Firmware Settings
    F2 on boot works when you shut down Windows completely, but Windows 8.x does not do that by default. (It hibernates the kernel instead.) One way to shut down completely is to depress Shift while you click on Shut down. Restart also shuts down completely during the process.
    -Jerry

  • How to enter bios pavilion dv7

    I cannot figure out how to enter bios on my pavilion dv7-1135NR, i need to figure out how to change boot order!

    Tash2000 wrote:
    I have installed a new motherboard into my HP Pavilion.
    I have tried to update the BIOS for this motherboard and since doing this it is not possible to change the sata controller mode from RAID to anything ese - it will not save the settings.
    I have replaced the CMOS battery and changed the CMOS jumper but nothing has worked. Can anyone provide the original BIOS file so I can try and re-flash it?
    Or does anyone have any other suggestion?
    Many thanks
    Hello Tash2000.
    What is the product number for your computer?
    Please click the white star under my name to give me Kudos as a way to say "Thanks!"
    Click the "Accept as Solution" button if I resolve your issue.

  • 990FXA-GD80 V2 - can't enter BIOS setup

    This board has mostly been working fine. I have a FX-8150 in it, and I switched out the fan for a Coolermaster. Now, it boots, but when I try to enter BIOS setup, it hangs on "Starting setup..." (or something like that) at the bottom of the screen.
    I have tried clearing the CMOS (including unplugging) a couple times. Not sure what else to try...

    Quote from: flobelix on 21-June-13, 03:30:41
    Try with the board outside case on a non conductive surface and basic setup (one mem stick, cpu/cooler, psu, vga). Remove all drives and USB devices.
    That worked. Thank you. I am able to enter the BIOS setup. But will it still work in the case?
    EDIT: I did some searching and this is probably a case shorting. I noticed that one of the brass standoffs had come loose and was still attached to the screw when I took it out. I'm guessing that's what caused the short. I'll be more careful with the standoffs and see if that helps. Thanks for your help.

  • How to recover Bios on Satellite A300

    How to recover bios on satellite A300 laptop?

    > Somebody told me that the bios must have infected and asked me to rewright the bios.
    So this someone hasn't got much savvy.
    Sorry mate but this issue has nothing to do with BIOS. BIOS is saved on the ROM module the virus cannot affect the ROM module since it needs to be flashed and I dont think that this a case on your notebook.
    You just deleted something in registry?? Im afraid this is not enough to get rid of a virus
    The best solution is to format the HDD and to reinstall the system once again
    Use the recovery disk because the recover would delete all partitions and would reinstall the system, drivers and tools again

  • Cant enter bios setup on K8N NEO2 Platinum

    I have just finished building new box, loading XP, all my core programs , used live bios to update to 1.b and left for 3 days to burn cpu in (using folding program, stable and no heat problems encountered), now i cant enter bios setup , when i hit del to enter bios setup, i get a flashing cursor top left of a black screen and it just hangs there, no key commands work and it requires a reboot , all programs and bench tests are working correctly, i just cant get into bios to start tweaking. Any ideas or solutions would be appreciated.

    here you go:
    https://forum-en.msi.com/index.php?topic=88211.msg632728#msg632728

Maybe you are looking for