How to enter dates in HypPlanning and make calculations

Hi,
Please help. I need to input two dates (with month and year only) using Hyperion Planning and make a calculations of the number of months that are between.
Example
Jan-2010 to Dec-2010 = 12 Months
Jan-2010 to Jul-20111 = 19 Months
Please any advice or best practices.
Kind Regards

Have a look at the following post :- Re: Days behaviour between two dates
Cheers
John
http://john-goodwin.blogspot.com/

Similar Messages

  • How to extract data via webservices and configure webservices in BI 7

    Hi to all,
    Can any body tell me How to extract data via webservices and configure webservices in BI 7.
    i have created a remote functionmodule which extract data from R/3 , now i want to upload data to BI 7 using that remote function module.
    i have use webservice (push) as adapter mode, as i want to connect function module with SOAP , via web services.
    please can any body tell how to do that.
    also how to configure the webserive , what is it .
    I SHALL BE THANKFULL TO YOU FOR THAT
    Regards
    Pavneet rana

    Hi,
    1. Using the function library (transaction SE37), call the Web service creation wizard.
    To do this, select the desired function module in the function library and choose Utilities ®Generate Web Service ® From the Function Module.
    2. Go through the following steps, shown in the wizard:
    a. Create a virtual interface.
    The virtual interface represents the interface between the Web Service and the outside.
    b. Choose the end point.
    The name of the function module that is to be offered as Web service is already entered here.
    c. Create the Web service definition.
    The Web service definition helps with assigning the Web service features, such as how security can be guaranteed in data transfer.
    d. Release the Web service.
    The wizard generates the object virtual interface and Web service definition in the object navigator.
    The function group that was generated when the XML DataSource was created is not transportable and is thus assigned to a local package. To prevent errors due to transports, make sure that the objects that were generated in the Web service creation wizard are assigned to a local non-transportable package.
    The Web service is released for the SOAP runtime.
    3. In the virtual interface for the import parameter DATASOURCE, define the name of the XML DataSource as the fixed value.
    A separate function group is generated for each XML DataSource. It makes sense to pre-assign the parameter DATASOURCE with the name of the XML DataSource in the virtual interface of the Web service for which the function group was generated.
    If you do not pre-assign the parameter, it will be necessary to transfer the data sent with the appropriate filled DataSource element, for example, by setting the value in the application that implements the Web service.
    a. In the object navigator, choose the name of the package in which the Web service was created and choose Enterprise Services ® Web Service Library ® Virtual Interfaces.
    b. Choose Change in the context menu for the virtual interface.
    c. For the virtual interface, remove the flags exposed and initial and enter the name of the XML DataSource in apostrophes, for example u20196ADATASOURCENAMEu2019.
    d. Activate the virtual interface.
    Regards,
    Marasa.

  • How do you sync voice memos and make CD's of them?

    How do you sync voice memos and make CD's of them?

    When you sync the phone with your computer voice memos are copied to your iTunes library with the Genre "Voice memo".
    To burn to CD you do it the same way you would any music; create a playlist of the memo(s), the right click on the playlist and choose "burn to CD".

  • How to change data source name and context root during deployment

    Hi,
    Env:
    WLS 10.1.3
    JDev 11.1.1.6
    Hudson
    I need to deploy two instances of my ADF application on the same development enviroment. We are using Hudson to deploy. My question is how to change data source name and application context root before second deployment.
    Kuba

    I don't believe there is an inbuilt facility to do this.
    Previously how I've done this is when checking files out using Hudson jovs, before the build I then use an Ant extension called XmlTask (http://www.oopsconsultancy.com/software/xmltask/) to modify the required XML files.
    Can I ask why you're doing this in the first place please? Multi-tenancy? 2 versions of the same app?
    CM.

  • How do I take a photo and make it the shape of the object I choose, eg. oval, etc?

    How do I take a photo and make it the shape of the object I choose, eg. oval, etc?

    I am not in front of a Mac at the moment but believe it is:
    select the image > Menu > Format > Mask with shape > choose oval
    Peter

  • How to sinck data between  production and R12 instance

    Hi,
    I am working on Oracle Apps up-gradation project.
    Now I have upgrade 11.5.7 to R12 (12.0.4) successfully. I started up-gradation task with 1 May of production data (backup) on new machine.
    Client wants to live R12 from 1/August/2009.
    Please suggest how to sinck data between production and R12 instance.
    Thanks
    Anup

    Hi,
    It is not possible to do what you propose (sync data from an 11.5.7 system to a 12.0.4 system). You will need to re-run the upgrade against the August 1 data, following your original upgrade procedures.
    Regards,
    John P.
    http://only4left.jpiwowar.com

  • How to clean up my mac and make it run faster

    I want to know how to clean up my mac and make it run faster.. seems very bogged down lately and doesnt do stuff very fast anymore..

    macworld.com/mac-troubleshooting-what-to-do-when-your -computer-is-too-slow.
    Basically... Make sure you have enough Free Hard Drive space for your Mac to Perform as expected...
    This is what Apple has to say.
    http://support.apple.com/kb/PH10798
    More Info Here...
    ds store  >  Why is my computer slow?
    Thomas A Reed  >  Mac Performance Guide
    To keep your Mac Happy... See Here...
    http://support.apple.com/kb/HT1147
    http://www.thexlab.com/faqs/maintainingmacosx.html
    Mac OS X: About background maintenance tasks

  • How to create website on iweb and make it public, and tell me how to put a password on it.

    Hi, can you tell me how to create website on iweb and make it public, and tell me how to put a password on it, thanks.

    Find a webhosting company :
    http://www.google.jo/search?q=webhosting+jordan
    They will provide the instructions how to password protect a directory (=folder)?
    Until you find one, you can practice on your own computer :
    http://www.wyodor.net/Tutorials/iWebDemo/sFTP.html
    Here's a some tutorials :
    http://www.apple.com/findouthow/web/

  • How to load data to dimensions and fact table is it simialr to sql server

    How to load data to dimensions and fact table in a data ware house environment, is it simialr to sql server, oracle?
    Never migrated or loaded data to datawarehouse server.
    I have an interview and am really confused if they ask anything related to the dataware house side elements.
    Coudl you please if you don't mind provide me some steps and dimension and fact table info, an example only.
    Atleast for my knowledge.
    Thank you very much for the helpful info.

    Some discussions in previous forums should help you
    http://forums.sdn.sap.com/thread.jspa?threadID=2019448
    http://forums.sdn.sap.com/thread.jspa?threadID=1908902
    In the SAP tutorial, you can see a sample example of making fact tables.
    http://help.sap.com/businessobject/product_guides/boexir32SP1/en/xi321_ds_tutorial_en.pdf
    Arun

  • Tcode to enter data in estmj and estrh tables?

    can any one know which tcode i have to use to enter data in estrh and estmj tables?

    It is actually telling me that CG01 is obselete in my 46c system, it will not l let me do anything else with that transaction.  I go to CG02, and I am able to create there.
    Regards,
    Rich Heilman

  • How to keep the Sonogram settings and make them "Sticky"?

    I am a Forensic Audio Examiner and would love to use Soundtrack Pro. Does anyone know how to keep the Sonogram settings and make them "Sticky" so you don't have to reset it every time you open up the project?
    Also the Sonogram loses it's frequency range settings while changing the zoom.
    Where is the feedback link for this application?
    Thanks

    are you talking about the spectrum analysis?

  • How to normalize data in BW and in Bex Report

    Hello Experts,
    Could you please clarify me with the followings please?
    1. How to normalize data in BW and in Bex Report?
    2. What are the best designs for data normalization and where?
    3. What are the advantages and disadvantages for BW data normalization / denormalization?
    Need your guidance and will appreciate help.
    Thanks in advance.
    Regards,
    Bhakta

    Hi,
    You can do this in the report. See here for details:
    http://help.sap.com/saphelp_nw04s/helpdata/en/1f/25883ce5bd7b1de10000000a114084/content.htm
    Hope this helps...

  • How to save a list template and make use of it in another website as webpart ?

    How to save a list template and make use of it in another website as webpart ?
    1. Save As "List A" as .STP
    2. Go to another website, in the document workspace I try to Add webpart -> Browse -> Upload the STP file, but after that the List A webpart still doesn't appear.
    Any clue which part went wrong? 

    Hi,
    firstly you need to upload the .STP file to a list solution gallery of the site and then you can add the list (under custom name) to the webpage
    see here for how to-
    http://office.microsoft.com/en-us/sharepoint-server-help/copy-or-move-a-list-by-using-a-list-template-HA101782479.aspx
    Hope this helps!
    Ram - SharePoint Architect
    Blog - SharePointDeveloper.in
    Please vote or mark your question answered, if my reply helps you

  • How can i repair my logo and make the fill transparent, in ID CC?

    I am first time user for InDesign CC how can i repair my logo and make the fill transparent, in ID CC?

    No I did it InDesign CC, ill try illustrator, but I was able to fill in with a light grey that made the other parts of logo stand out, so I may just leave it that way.

  • New HD- how do I copy orig HD and make it the master?

    Hi everyone,
    I just installed an internal 160GB Seagate drive into my computer which is running 10.2.8, on 12GB original hard drive.
    I just placed it in there and plugged it in. Machine was shakey on startup, but it finally showed me the desktop, but no icon for the new disk on there. but luckly, It showed up in system profiler (it says I have 120GB, I know I need a ata thing, but that's fine for now)!
    I got into disk utility and partitioned it into 2 parts for (graphics mainly) applications and hard drive info- 60GB. I'll use the other half for storage. Both partitions now appear on my desktop-whew.
    how should I go about making the new drive- disk utilities says it's the slave- into the master? (12GB original HD vs. 60GB partition)
    Should I just drag and drop files to the new partition? I DL'd that "super duper!" program, should I use that?
    and after I do that, should I switch the jumpers on both hard drives to make 120GB the master?
    Does it have to be the master to be the startup disk?
    why does it have to be the master?
    thank you. I love this forum, and I tell everyone about it.

    Hi,
    You need Carbon Copy Cloner.
    Here is a post that I made for another user.(who had a laptop)
    In X you cannot drag and drop the system like you could in preX systems.
    You have to use a program like Carbon Copy Clone or Super Duper or the restore function in Disk Utility. Each has its benefits and liabilities.
    My favorite is Carbon Copy Clone. Here is a post I made to another thread on this topic.
    A clone is just what it says. It is an exact copy of the parent.
    Unlike the mac os's prior to X, you cannot just drag and drop your system or many of it's folders to another hard drive/partition to copy them. There are invisible files and links between files that have to be maintained. No problem, you just use a program for cloning. I have used Carbon Copy Clone for years and for making a simple clone it is easy and works well.
    To start with, you need another hard drive. You will need an external firewire drive to make it bootable (a combo firewire/usb is fine but just usb won't work on our macs. The newer Intel macs are usb bootable but ours just work on firewire). Once you have the external drive plug it in, turn it on and format it using Disk Utility to hfs+ journaled. If you want to split the drive in 2 or more parts you can do it now. Keep in mind that you need at least as much space on the clone as the parent takes. To split the drive later would require erasing it's contents so decide if you want to have more than one copy of your system (one for testing the other for backup or what ever). This is all done with Disk Utility.
    Now that you have the destination for cloning download CCC
    http://www.versiontracker.com/dyn/moreinfo/macosx/13260
    (This site is also a great one for downloading share ware, updates, etc. so book mark VersionTracker.com).
    First open your preferences and select Energy Saver. Set it to a couple of hours or just turn it off. You don't want to sleep during the clone process. You might also want to plug your laptop into the power supply.
    Once downloaded, drag CCC to the Applications folder, start it and you will get the panel for cloning. Click the preferences and select "repair permissions before cloning and make bootable".
    Close the preferences and on the main panel your source is your current hard drive. The destination is the external drive (or one of it's partitions if you decide to split the hd). Click the lock at the bottom to bring up the authentication window, enter your name, click the clone button and go watch tv or something.
    When it is finished you will get a window telling you so. Don't do web surfing or Photoshop work while cloning. If you can't remember what programs are running before cloning then just restart your mac and go directly to CCC or whatever program you decide to use (some like SuperDuper also available on VersionTracker.com. Just enter "clone" in the search window).
    When it is all done try booting from your clone. You hold the option key down at boot and with the firewire drive on you should get a screen with both the laptop's hard drive and your external drive as valid start drives. Select the external and it should boot. If it does not go back to your main drive, open preferences and select Startup Disk. Your clone should appear there. Select it and restart. If it still does not work then your clone is bad but in 3 years of cloning I think that this happened one time.
    If you ever mess up the main laptop drive or it dies you can start your laptop off the clone, start CCC, erase the laptops messed up/or new drive and clone your backup to the laptop. Now a catastrophic failure of the system or the hard drive won't cost you any lost info and time.
    I keep several clones on several drives for backup. Every few months I use dvd's to back up critical customer files but in the interim it is clones of the main drive. When major updates to the system come along and I'm going to install them it is never without making sure that I have an up to date clone to fall back on. Years ago I had a drive fail that I thought was backed up on cd's. It was an expensive lesson in backing up. Since then I have had half a dozen hard drives fail so my paranoia with multiple clones. Cloning is the easiest way to make sure everything is backed up.
    Message was edited by: Carl Jerris

Maybe you are looking for