How to enter individual defect and total defects for the same opeartion
Hi Gurus,
My client has a new requirement.
Currently we are entering results for an Chemistry operation with following characteristics.
Refusal Defects
AQL 0.10%
AQL 0.40%
AQL 0.65%
AQL 1.0%
AQL 4.0%
these characteristics are assigned with different sampling procedures with sampling schemes based on their AQL level.
But now my client wants to check each characteristics based on Individual defects ( 0.065 AQL) and Total permitted defects ( 0.25 AQL).
Please give your suggestions to map this scenario.
Thanks,
SDN.
Hi Sujit,
Yes. I could think of it. Thank you.
Can we do anything through config or Master data set up to accomplish this?
Regards,
SDN.
Similar Messages
-
ALV: how to display only subtotals and total rows in the output
ALV: how to display only subtotals and total rows in the output
i am getting output
i am getting subtotals for respective fields
but i want to display only subtotals and totals rows in the output
i have tried the
totals_only parameter in slis_layout_alv
but it is not working.hi,
For TOTAL
For the amount field / quantity field in the field catalog give DO_SUM = 'X' for WHOLE total
For SUBTOTAL
For subtotal you will have to create an internal table sort..Let's say you want to do subtotal for each customer..
DATA: lt_sort type SLIS_T_SORTINFO_ALV,
ls_sort type slis_sortinfo_alv.
CLEAR ls_sort.
ls_sort-spos = 1.
ls_sort-fieldname = 'Give the field name that you do the sum'.
ls_sort-up = 'X'.
ls_sort-subtot = 'X'.
APPEND ls_sort TO lt_sort.
fieldcatalog-do_dum = 'X'.
for subtotals
WA_SORT-FIELDNAME = 'ERSDA'.
WA_SORT-SPOS = '2'.
WA_SORT-UP = 'X'.
WA_SORT-SUBTOTAL = 'X'.
APPEND WA_SORT TO IT_SORT.
Refer
http://help.sap.com/saphelp_erp2004/helpdata/en/ee/c8e056d52611d2b468006094192fe3/content.htm
http://sap.ittoolbox.com/groups/technical-functional/sap-dev/doesnt-function-event-subtotal_text-in-alv-713787
regards,
Prabhu
reward if it is helpful -
How do i have landscape and portrait slides in the same keynote file?
how do i create landscape and portrait slides in the same keynote file?
You cant, its one or the other not both, the slide size setting is for the whole presentation, not for individual slides.
The slide format is chosen to match the display the presentation is shown on. I have presentations showing on vertical, horizontal, square, circular and iregular shaped screens with rear projection, but a single format must still be set. -
How to export an album and keep images in the same order in elements 11 mac
I made an album of my trip to Australia (lots of pictures) and changed the order of the images (not the same as shooting order) and when I export the images in the album to a folder or memorystick, the images are copied to that place but I lost the album order of the images.
How can I prevent that, without having to renumber al 500 images separatly?
Gr JosThanks for the tip, Michel
It worked like a charm…
cheers Jos
Op 28 okt. 2013, om 18:49 heeft MichelBParis <[email protected]> het volgende geschreven:
Re: How to export an album and keep images in the same order in elements 11 mac
created by MichelBParis in Photoshop Elements - View the full discussion
JosU a écrit:
I made an album of my trip to Australia (lots of pictures) and changed the order of the images (not the same as shooting order) and when I export the images in the album to a folder or memorystick, the images are copied to that place but I lost the album order of the images.
How can I prevent that, without having to renumber al 500 images separatly?
Gr Jos
The order in album is only kept in the organizer database, so the only way not to lose that order is to rename files.
If you are using the 'export' function, select your album in custom order, select all photos and in the dialog, choose to rename with a common base name.
Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/5794538#5794538
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/5794538#5794538
To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/5794538#5794538. In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Photoshop Elements at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746. -
Different LOVs in af:query and af:form for the same VO attribute
Hi,
We need to display different LOVs in af:query and af:form for the same attribute in VO.
Is it possible to use LOV Switcher for this ?
What condition can we use in LOV Switcher attribute to check if it is View Critearia row or VO row ?We have a VO attribute "User" which needs to be displayed as LOV in a Search Panel ( af:query component created using View Critearia ) and in a af:form.
When this VO attribute is displayed in search panel, in LOV, we need to show all users.
When this VO attribute "User" is displayed in a form for editing, in LOV, we need to show only active users.
For this, we created two LOVs "ActiveUsersLOV" ( which shows only active users ) and "AllUsersLOV" ( which shows all users ) on VO attribute "User".
LOVSwitcher attribute should return "ActiveUsersLOV" if the LOV is displayed in form and "AllUsersLOV" if the LOV is displayed in search panel. -
I am subscribed to Photoshop only and I want to know if I can change my subscription to have your new offer of Lightroom and Photoshop together for the same price that I am paying for Photoshop alone?
Contact sales support by web chat. They can cancel your current subscription and transfer you to the new one if you are within certain criteria. Otherwise you may need to wait until your subscription runs out and then sign up later.
Mylenium -
Enter more than one personnel number for the same confirmation in CO11N
More than one labor working on Machine work center simultaneously.
So that during production orders confirmation in CO11N we need to enter more than one personnel number for the same confirmation but in CO11N the system allow me to enter only one personnel number.
Note: I can not distinguish between the productions for each labor so that I can not enter separate confirmation for each labor.Hi,
You can use the User Exit: CONFPP07 Single Screen Entry: Inclusion of User-Defined Subscreens
for this purpose..
Take help from the ABAPer for this enhancement..
Regards,
Siva -
How do I make Organizer and Editor open at the same time?
I'm new to PSE 10 and want to know how to make Organizer and Editor open at the same time. I can get the Organizer up, but have to pick out a photo and click on Fix: Full Photo Edit to get Editor to open. Is that the only way to do it?
Thanks,
KCreate Desktop shortcuts for the Organizer and the Editor:
The Editor's executable is:
"C:\Program Files (x86)\Adobe\Photoshop Elements 10\PhotoshopElementsEditor.exe"
The Organizer's executable is:
"C:\Program Files (x86)\Adobe\Elements 10 Organizer\PhotoshopElementsOrganizer.exe"
Ken -
How to align output formatted and output text in the same line?
Hi All,
I want an output formatted label and a text on the same line,. I've surrounded these components wth a panel form layout and they automatically align one below the other. how do I kepe them in the same line?
Thanks.Try as per the code snippet below:
<af:document title="TestPage.jspx" id="d1">
<af:messages id="m1" inline="true"/>
<af:form id="f1">
*<af:panelGroupLayout id="pgl1" layout="horizontal">*
*<af:outputFormatted value="outputFormatted1" id="of1"/>*
*<h:outputText value="outputText1" id="ot1"/>*
*</af:panelGroupLayout>*
</af:form>
</af:document>
Thanks,
Navaneeth -
How to use Forms 5 and DevSuite 10g in the same machine
Hello everybody,
I have installed forms 5 and IDS 10g in one machine and both the versions of the forms were working simultaneously. Now I have un-installed both the versions of the forms and re-installed in the same machine. Installation was successful. but I am not able to connect to the database in forms 5. It shows TNS could not resolve service name. TNS is created in both the versions with same name as well as different name. The IDS is working fine. Please help.
Thanks and regards
Sukanta sarkarSukanto,
What error are you getting? One potential problem you will have with more than one version of Oracle Dev Suite installed is keeping the TNSNAMES.ORA synchronized. I've found the easiest solution to this problem is to add the TNS_ADMIN registry key to each Oracle Home so I can share a single copy of the TNSNAMES.ORA file. You can add this entry by starting the Window Registry editor (regedt32.exe or regedit.exe) and navigate to the following registry hive:
HKEY_LOCAL_MACHINE => SOFTWARE => ORACLE => HOME? (where ? represents the number of the Oracle Home, eg., 0-9).
In your example, Forms 5 should be in HOME0 and IDS 10g should be in HOME1. Open each home and add a new "String Value" and name it: TNS_ADMIN. After you have added the new String Value entry, edit the String Value and enter the path to the copy of your TNSNAMES.ORA that is working. Then do the same thing with HOME1 and exit the Registry. You should be able to connect to your database with Forms 5 and IDS 10g. Normally, changes to the registry do not require you to reboot your computer, but I have seen where this is necessary - though not very often.
Note: Always ensure you have a BACKUP of the Windows Registry before you make any changes. If you uncomfortable modifying the Windows Regisitry, then I don't recommend you make this change.
Hope this helps.
Craig... -
How to backup a MacBookPro and a Powerbook on the same external HD
I bought a 500GB LaCie FW800 external HD for making bootable backup of my MBP C2D and Powerbook Alu.
My idea was to create three partions - 120 GB for the MBP, 120 for the PB and 260 GB for the iTunes libraries and iPoto libraries of both portables.
I discover the different formatting needs requested for a bootable backup for Intel Macs and PowerPC Macs via Disk Utility cannot let me go ahead, and only one of the backup can be bootable at the end.
Is there some way to find a solution to this?
Thanks
MacBookPro Core2Duo Mac OS X (10.4.8)Welcome to Apple Discussions!
This article explains how to partition with PowerPC and Intel Mac compatibility on the same drive:
http://www.macosxhints.com/article.php?story=2006061610374449 -
How to generate different report view in teststand for the same execution?
My requirment is to have two different view for the same report that gets generated during one execution using in TestStand OI(CVI)? One view would be summary view (displays only test step types, excluding action step types) and the other view is detail view that displays all the steps that are recorded. Data for all the steps needs to get recorded in database. Any suggestions are helpful!!
CLD,CTDHello.
I think you would have to create two separate reports, one as summary report and one as a 'full' report The viewers are just 'viewers' and simply display whatever you set to them.
I had display a text report that was basically a summary report ( failures only ) and then display an HTML report that contained all steps were set to be recorded. This required quite a bit of modifications on both the process model and the operator interface side. The operator interface (in LabVIEW ) had to contain 2 separate UIReportView controls.
Let me know if that is your desired direction and I could point you to some more ideas.
Thanks,
PH -
Stetting up FTP and SFTP adapters for the same interface
Experts-
I have a situation in which client has a requirement to setup both FTP and SFTP adapters (from adapetive adapters) for the same interface. They want to have a copy of file locally and also want a file to be sent out securly using SFTP. In my interface which was previously developed they have used one business system and added FTP and SFTP to the same. If try to add new Receiver Agreement it will say that the object already exists as the Interface Mapping is same.
Please send me any suggestions which would resolve my problemHi Hari,
As you cannot create two Receiver agreement using only one receiver interface , please create a new receiver Interface, add that in interface determination step and then assing a different channel to new receiver agreement.
If your requirement is to store the file ,i would suggest write the file in your unix directory using NFS( /usr/sap...). then run a AFT job (if already set up in your landscape) to transfer file securly to target destination.Not sure if its feasible in your case otherwise you can use SFTP for the secure transfer.
Best Regards
Srinivas -
How to print Individual mode and Collective Mode for Goods Receipt
Hi Friends,
Right now I am working on Smartforms on MIGO transaction.
My Client requirement is that all items that have been received should be printed on one form in
Collective mode.More specifically in the transaction MIGO only the items checked OK should print on
the form. It Should also allow the user to print Items in Individul mode.
Could anybody please specify on what basis( fileds ), I will be able to segregate the items.
how can I write the select stament so that when the user selects collective mode and accordingly
should print. same for individual mode.
Kindly help me.
Regards,
Xavier.PIn MIGO tcode you strcture like GOHEAD-XNAPR and GOHEAD-WEVER
if you check GOHEAD-XNAPR = X and select GOHEAD-WEVER Individual mode and Collective mode..... -
Why I pay for my Individual account and Creative Cloud for the team?
Hi,
I subscribe to Creative Cloud from last year. I started a company with two other partners. I registered us for Creative Cloud Team. I asked the tech support and I was not supposed to continue paying for the individual account.
However, I continue to pay for the old account and the Individual account team ... How not to pay for my personal account?
TanxHi JF-Grimard
I will cancel your personal account and refund the August & September charges as you started your Teams membership in August.
Thanks
Bev
Maybe you are looking for
-
Hi, Please provide an overview of AP payment run process. Thanks, Teo
-
Creation of GL for VAT Accounts
The client is paying VAT while purchase of Raw materials and charging VAT to its Customers while selling its products. The Input VAT is to be set off against Output VAT partially. So, how many GL accounts should be created for VAT ? Should it be sepa
-
There is no mode switcher on my Audio Console launcher.
I have the Soundblaster X-Fi Extreme card and downloaded some time ago the console launcher. The application on the site says the version currently available dates from 2007. I open up the launcher but do not have the modes tab at all. Why is that? H
-
Upgrade linux Red Hat version 4 to Red Hat version 5 on an appliance CWWLSE-1130-K9
Hi. I have a WCS 5.0 installed on an appliance CWWLSE-1130-K9 to Red Hat Linux 4.0. I need to upgrade to Linux Red Hat version 5 in order to use WCS version 6.0. Does anyone know the procedure to do it?
-
Can one get a bluetooth plantronics 510 voyager to work with skype?
I have a Bluetooth enabled Plantronics 510 voyager and was curious to find out if it is possible to work with skype on my macbook. If so, how? If not I guess that's why my macbook is not detecting the headset.