How to enter K210 BIOS?

I've been there, I know I have, I just can't remember how I got there in the first place.
Can anyone tell me the key (or combination) to enter the K210 ideaCenter's BIOS?  I'm guessing the boot screen tells me somewhere, but my monitor takes a second to sync, and the first thing I see is the Winows boot screen.  Very annoying.  I need to get this PC to boot from the CD-ROM first..
Thanks!
Solved!
Go to Solution.

Ah, never mind - F1.  Got it.

Similar Messages

  • Tecra 8000 doesn't boot from CD - how to enter the BIOS?

    Hello,
    i have a 2nd hand tecra 8000.
    Now it dont boot from CD? i dont know why... but he question is how to enter on BIOS setup, because is not possible with F2 key.
    How to enter on BIOS?
    Thanks too much
    Francisco
    ([email protected])

    Hi
    Please check this Toshiba FAQ document:
    How to access to the BIOS Setup - instructions for most models
    http://support.toshiba-tro.de/kb0/FAQ6401G1000DR01.htm

  • How to enter the BIOS settings on my Satellite L50-A-k4W?

    Help me pls!! How to enter the BIOS settings? I do not know, and Google does not help me =((

    At first you have to perform an complete shutdown.
    Here an HowTo:
    http://aps2.toshiba-tro.de/kb0/TSB2B03EY0002R01.htm
    The point is that Win 8 does not shut down the notebook but the unit performs hybrid shutdown to boot faster. So unit needs to be shut down in order to access the BIOS.
    Start notebook again and press F12 to enter boot menu. Thee you can find option for BIOS settings. You can also try with F2 at start up.

  • How to enter a BIOS/UEFI password in T420?

    Hello, I don't need to remove the UEFI supervisor password, I know what it is. The problem is that I can't get it to prompt me for that password! Pressing Thinkvantage button + F1 just prompts for the power-on password, and I'm never asked to enter the supervisor password so that I can enable the VT & VT-d settings. This is really critical, I can't run VirtualBox without it.
    Can anyone explain how to enter it? Am I getting to the BIOS settings the wrong way?
    Solved!
    Go to Solution.

    Power off, start it up, enter Supervisor password at Power On password prompt.
    Hope this helps!
    I don't work for Lenovo. I'm a crazy volunteer!

  • Dynabook: How to enter the BIOS settings?

    I have a Dynabook V2/470 CRC. How can I enter the BIOS
    settings on this laptop?

    Hello
    This unit is not known to me but I assume that you can enter BIOS setting pressing F2 button or maybe ESC in combination with F1.
    Bye

  • Sat 4070cdt: How to enter the BIOS?

    Hi i have a satellite 4070cdt, am I able to enter the bios, if so how please

    Hello Steve
    As far I know it should be possible to enter the BIOS by pressing the ESC and then F1 button.
    Bye

  • How to enter to BIOS for the Qosmio F20-137

    F1-F12 which key enter to bios, if i want doing something at bios setting.

    Qosmio has Toshiba BIOS and every unit with Toshiba BIOS can be enter using ESC > F1 key.
    Some Toshiba units have Phoenix BIOS and it can be enter using F2 button at the startup.

  • How to enter the BIOS in Satellite C50-A006

    Hi!
    I wanted to enter BIOS to select boot sequence in Satellite C50-A006 running with Win8, but I was unsuccessful. I tried pressing F2, F8, F12, ESC and DEL but no luck. Also tried googling, also no luck.
    Please help.
    Thank you!

    Hi
    At first you must perform complete shutdown. After doing this you can start machine and enter BIOS settings.
    How to perform complete shutdown you can read on - http://aps2.toshiba-tro.de/kb0/TSB2B03EY0002R01.htm
    Try it please.

  • Toshiba P875 S7102 How To Enter The Bios Setup

    I have been tring everything to get to the bios screen of the computer.  I have tried holding Esc, F1, F2, F10, F12, Delete, but that has not worked.  I have found a toshiba manual that said to hold F2 until you see the toshiba logo then release it.  Nothing has worked, it just continues to boot to windows 8.
    I have searched and searched, this forum and the web, but I have not found anything that has worked to get into the BIOS setup screen.
    What is the proper key stroke to get into the bios screen for P875 S7102 laptop?
    Thanks.

    The "secret" is what you do when shutting down before attempting to access the BIOS.  Press the shift key as you click Shutdown. Then on startup, tap F2 to take you to the BIOS screen.
    This applies to Toshiba laptops that came PRE-INSTALLED with Windows 8. It does NOT apply to Windows 7 machines or those that were UPGRADED from Windows 7 to Windows 8.
    C.B.
    Toshiba Sat. C75D-B7260 Win 8.1 64 Bit--Toshiba Sat. L775D-S7132 Win 7 HP SP1 64 Bit and Win 10 PRO Technical Preview--Toshiba Sat. L305-S5921 Win Vista SP2 32 Bit

  • How to enter BIOS in e450

    Just got this laptop.
    Can't enter BIOS. NO F1-F12 keys.
    On start up, it just gives Lenovo splash screen then boots windows 8. I am clicking F1 (also tried FN+F1) and nothing happens.
    How to enter bios...
    Thank you
    Solved!
    Go to Solution.

    Hi jimmyr, welcome to the forum.
         Please see this link, and it should answer the question for you.
    http://blog.lenovo.com/en/blog/how-to-enter-the-bios-setup-utility-or-boot-menu-with-windows-8-1/
    Cheers
    DragonRider
    I'm DO'ing IT
    Lenovo Y470 085525U 2nd generation Intel® Core™ i7-2630QM processor ( 2.00GHz 1333MHz 6MB )
    IdeaCentre A520 Intel® Core™ i5-3230M processor ( 2.60GHz 2600MHz 3MB )
    YOGA Tablet 2 Pro-1380F
    X1 Carbon 2nd Gen (20A8) ThinkPad + T420

  • How to enter Bios Setup Satellite 4030?

    I'm searching for Informations how to enter the Bios Setup.

    To enter BIOS settings use ESC button.

  • How to enter bios on Qosmio E10?

    I only need to know how to enter the BIOS on Qosmio E10!
    Thanks in advance
    globii

    You can enter the BIOS with ESC.
    Press ESC directly after power on the notebook.
    Good luck!

  • How to enter BIOS settings on Equium L10?

    Please can someone tell me what button i press too get into the bios setup at the start when i switch my pc on cos i have tried every thing, but nothing works.

    Hello
    Every time when you switch the notebook ON you can see at the bottom left hand site the short instruction how to enter BIOS settings. In your case you must use F2 button. Please keep it down immediately after switching the notebook ON.
    Generally the Toshiba notebooks are delivered with two different BIOS versions (BIOS producer):
    - TOSHIBA BIOS: enter using ESC and F1 button
    - Phoenix BIOS: enter using F2 button.
    According the specification your unit has Phoenix BIOS.
    Bye

  • How to enter BIOS on NB100?

    How do I enter IOS set up?
    I read on the web that this is done on the NB100 by holding down the power on buttone and esc. Thjen pressing F1 but this doesn't work.
    What am I doing wrong please?

    On the Linux version you press F2 to enter the BIOS setup, and F12 to choose which drive to boot from.
    It shows this on the bottom of the screen when it starts up. You have to be quick, it's only on for a couple of seconds.

  • How to enter bios Setup (not the F1 stuff, the splash screen display settings)

    So I some how got into a seperate bios setting program by pressing ctrl S when some other bios utility was loading and changed the splash screen display (how long it shows the press enter stuff)
    but now I have no idea how to get back into that configruator.
    the Manual doesn't mention it, so question, how do I bloody do it?
    T430S 2542 btw

    Hello
    Every time when you switch the notebook ON you can see at the bottom left hand site the short instruction how to enter BIOS settings. In your case you must use F2 button. Please keep it down immediately after switching the notebook ON.
    Generally the Toshiba notebooks are delivered with two different BIOS versions (BIOS producer):
    - TOSHIBA BIOS: enter using ESC and F1 button
    - Phoenix BIOS: enter using F2 button.
    According the specification your unit has Phoenix BIOS.
    Bye

Maybe you are looking for

  • Can I startup with Leopard from Mac Mini using iMac G5 as display?

    I'm considering a mac mini purchase after the release of leopard. I have a iMac G5 that is not cutting it for film rendering. I would like to use it as a display for my Mac mini. Can I use Startup disk and work in the Mac Mini's OS?

  • Banding attribute in data table not working

    Hi all, I am using the table for displaying rows of data from the backing bean. I set the banding attribute to be "row" and the bandingInterval="1",but I don't see the effect of these attributes when the table is rendered. Anything I miss in the back

  • Jsp:useBean

    I really shouldn't be trying to use JSP any more ... I have been having problems using JavaBeans in JSP pages now - every time a problem is solved, that other little thing that always wanted a go at annoying me arrives ... The code is: <jsp:useBean i

  • Project Siena app Publish Issue

    Hi all, I have just started creating Siena App and created simple translator app, its working fine but when I try to publish it using File-->Publish it shows me a warning prompt saying "Download Update require" when I click on "Download" the another

  • Delete all the database table content

    Hello Friends, I have a z table with 5 fields (all the key fields) and I want to delete all the table content and load fresh content from internal table. I tried using syntax 'delete ztable' but sy-subrc value is coming as 4, means no table content i