How to enter MR results only on one register even when other reg r MR relev

Hi All,
I have Device with 4 registers (1- Cummulative and rest are Balancing) . In the happy flow, i get the MR results from MDMR system and will be uploaded against the respective registers. So no problem.
But when i have exchange or removals, user will have only the register read for R1 to enter but not TOU values for 2/3 and 4 registers. Since 2,3 and 4 are also MR relevant, system will not allow to save without entering.
How to overcome this ?
Regards
Haricharan

HI,
You should load ZERO value consumption on R2, R3 and R4. Let the system load it.
At the end of your flow, update the MR status (EABL-ABLSTAT) for R2, R3, R4 to ZERO. Why this action your MR documents will be reset to MR Order status, with the exception on R1, which you which to keep.
Br,
André

Similar Messages

My laser Jet 1320 will only print one copy, even when asked to print mutiples. Any thoughts?

I have a Laser Jet 1320. I have windows Vista (I know!!!) It will only print one document despite being instructed to print 2 or more. I have tried re-installing the drivers but to no avail. Does anyone have any solution possibilities. Thanks

Then use the latest solution!
Which doesn't need specifying either.
Peter

How to approve the request only for one time for human task in BPM Worklist

Hi All,
I'm having a requirement where i have made the hierarchy in the .task file where in created two users for which i need an approval in a hierarchical manner. But when i'm approving the request from worklist app for one user and the request is going sucessfully to the second user and if i approve it over there it once again coming to first user where i have approve it once again to get the request processed. how to get request processed only for one time when it is approved. Do we need to customize anything
If you did it can anybody can share thoughts on this please. Your help is highly appreciated.
I am not able to see the rejected request at all. where to see the rejected request.
Regards,
CH

Hi,
Following are the some important points you should understand about ESS Leave Request Workflow
1. The Visualization ( how should it appear in UWL and what should happen when you click on a particular workitem) is defined in SWFVISU. Check for TS12300097. Generally, it invokes com.sap.xss.hr.lea.appl/LeaveRequestApprover Java WebDynpro application. Just check whether you are able to get the correct Leave Processing application called when you execute your workitem from UWL?
2. In general it should have option to process the leave request either approve/reject. When the leave request gets approved/rejected the status of the Leave Request document gets changed ( in workflow it is &REQ.STATUS&
3. There is a need to schedule a background job for program RPTARQPOST which will pick up all the documents in APPROVED status and creates an absence record for the same.
4. Apart from schedule job as mentioned above, you also have to schedule a background job for program RPTARQEMAIL, which is basically used to send e-mails for all the documents which are yet to be approved to correct manager.
as you say , you can not see Approve/Reject options from UWL, it looks to me that correct javawebdynpro application is not being called for this task. Just check this !!
Good Luck !!
Regards
Krishna Mohan

How do enter my product code into a trial version when I have a student copy of Adobe Photoshop CS6

How do enter my product code into a trial version when I have a student copy of Adobe Photoshop CS6

Redemption Code Help
Installing and Activating a Try & Buy product
Mylenium

How to transfer all lightroom settings from one pc to an other? Zsolt

How to transfer all lightroom settings from one pc to an other?

If you are talking about moving Lightroom and all your images to another PC, then this might help:
http://www.lightroomqueen.com/how-move-lightroom-to-new-computer/
If something different, please clarify what it is you are wanting to do.

How come Java methods can only return one variable?

Hi,
I am just curious, how come C/C++/Java methods/functions can only return one argument but can accept many parameters.
I know that the workaround is to return an object, but sometimes creating a class is just too much overhead.
Thank you in advance.

Hello,
It's an interesting discussion. To get the full answer to your question, you'd have to consult the library and find books on programming language design and implementation.
I believe the tradition goes all the way back to the first programming languages having subroutines/procedures/functions/methods in them: you can return nothing at all (void i Java) or a single value. The need for returning a single value, I guess, comes from the wish to embed calls in arithmetic expressions:
res = 2 * someObject.foo(x) - anotherObj.bar(a,b);To my knowledge, few languages allow you to return more values. One that does is BETA (see www.daimi.au.dk/~beta/). Though not indispensable, it's convenient sometimes. I don't know why it's not more widespread.
Yours,
Ole

How can I import my iphotos from one account to the other?

Someone knows step by step iphoto from one account to the other. I am admin but still I do not know how to bring my iphotos to a different account
thanks for help
marc

Just the Photos?
Export them from iPhoto to a folder on the desktop
Put that folder in the Users/Shared folder.
Switch User.
Drag the folder from the Shared folder to whereever you want it.
Share the Library?
For iPhoto 09 (version 8.0.2) and later:
What you mean by 'share'.
If you want the other user to be able to see the pics, but not add to, change or alter your library, then enable Sharing in your iPhoto (Preferences -> Sharing), leave iPhoto running and use Fast User Switching to open the other account. In that account, enable 'Look For Shared Libraries'. Your Library will appear in the other source pane.
Any user can drag a pic from the Shared Library to their own in the iPhoto Window.
Remember iPhoto must be running in both accounts for this to work.
If you want the other user to have the same access to the library as you: to be able to add, edit, organise, keyword etc.
Quit iPhoto in both accounts. Move the Library to the Users / Shared Folder (but note: some users find ongoing permissions issues with the Library in this location. It might be better to use an external HD set to ignore permissions, a Disk Image or even partition your Hard Disk.)
In each account in turn: Double click on the Library to open it. (You may be asked to repair the Library Permissions.) From that point on, this will be the default library location. Both accounts will have full access to the library, in fact, both accounts will 'own' it.
However, there is a catch with this system and it is a significant one. iPhoto is not a multi-user app., it does not have the code to negotiate two users simultaneously writing to the database, and trying will cause db corruption. So only one user at a time, and back up, back up back up.

My pic 3 has suddenly started draining the battery in only a few hours even when I am not using it. Might this mean something is running all the time? I recently downloaded Dropbox. How do I check? What do I do about it? Or is battery faulty? Tim

My ipad 3 has suddenly started draining battery in only a few hours. Even if not in use. Might this be because a programme is running in he background? I recently downloaded Dropbox. Might my photos still be downloading after a few days? How do I check? What do I do about it? Or might my battery be faulty? Thanks, Tim.

Using the battery level meter in this manner is comparable to using your car's fuel gauge to calculate miles per gallon. The only thing that matters is the total amount of operating time from full charge to auto-shutdown.
Use the wall-mount charger that came with the iPad and charge overnight. Admittedly the labeling is hard to read but, if you use a magnifier and squint your eyes, you'll see "Output 5.1V, 2.1A." The symbol between volts and amps is the symbol for DC. Do NOT use an iPhone charger. Do NOT use an iPod charger. Then, operate it normally until auto shut-down (ignore any low level alerts that may appear). An irony is that doing that test to determine the total operating time is also the exact procedure necessary to calibrate the battery level meter.
I'm not claiming that you do not have a problem. I am stating, however, that we don't yet know whether or not a battery problem exists.
According to Apple:
Use Your iPad Regularly
For proper reporting of the battery’s state of charge, be sure to go through at least one charge cycle per month (charging the battery to 100% and then completely running it down).
Elsewhere, Apple elaborates and explains that two half-discharges (or four quarter-discharges, etc.) equals one full discharge.

How to make a JDialog scrolling from one position to the other.

Hi all,
I want to move a JDialog from one position to the other(actually I want to scrolling/moving as messenger notification appear on top of the system tray) on the desktop.
Anyone of you can give me a clue.
Thanks

Ok here what I have try up to now. First make the initial position of the JFrame as follows.
    private void SetWindowLocation()
        final int screenHeight = Toolkit.getDefaultToolkit().getScreenSize().height;
        final int screenWidth = Toolkit.getDefaultToolkit().getScreenSize().width;
        final int frameHeight = this.getHeight();
        final int frameWidth = this.getWidth();
        int _y = (screenHeight - frameHeight - 32);
        int _x = (screenWidth - frameWidth);
// Initial location
        this.setLocation(_x, _y);
}This code place my Frame in the lower-right corner on top of the system-tray.
Then as you guys says, try to work on a Timer. Now I'm stuck with the action listener. I try to move the frame to upper-right corner.
    private void SetWindowLocation()
        final int screenHeight = Toolkit.getDefaultToolkit().getScreenSize().height;
        final int screenWidth = Toolkit.getDefaultToolkit().getScreenSize().width;
        final int frameHeight = this.getHeight();
        final int frameWidth = this.getWidth();
        int _y = (screenHeight - frameHeight - 32);
        int _x = (screenWidth - frameWidth);
// Initial location
        this.setLocation(_x, _y);
        _timer = new javax.swing.Timer(100, incrementYPosition);
ActionListener incrementYPosition = new ActionListener() {
        public void actionPerformed(ActionEvent evt) {
                   while(_y > 0){
                        // do the processing here.
                        // reduce the _y value and set the new location with _x
                };I'm stuck with that how to involve with the ActionListener here. :(:( After set the initial location how to deal with the ActionListener.
Any help.

I have time machine saving onto two usb drives. The backup is 4.6TB. Each drive is 6TB. Why is time machine only updating one drive? (The other has been the same for two weeks.)

I have time machine saving onto two usb drives.
The total size of the files being backed up is 4.6TB.
Each external USB drive is 6TB. So I have 12 TB of space for Time Machine.
Why is time machine only updating one USB drive? (One drive has been the same for two weeks.)
I have selected both drives in the Time Machine settings panel.
My understanding was that it would do a full backup, and then incremental backups of changed files, getting rid of old copies as needed, and alternate between the two drives.
But it looks like drive A has one complete backup, dated two weeks ago, and drive B is the only one getting action.
There is a red icon on drive one that says the drive needs 120GB more space to do a backup -- which is strange since the whole backup set is only 4.6TB in size, and the drive is 6TB in size...

You could try a clone instead.
Clone - Carbon Copy Cloner (Often recommended as it has more features than some others)
Clone – Data Backup
Clone – Deja Vu
Clone - SuperDuper
Clone - Synk
Clone Software – 6 Applications Tested
Time Machine Versus Clones and Archives
Commonly Used Backup Methods

I have a regular ipod and a ipod touch... how do I transfer the songs from one ipod to the other??

I have a regular ipod and a ipod touch... how do I go about transferring music from one ipod to the other?

Sync both with iTunes.

How to copy records from 2 file (one file depending from other file)

In fact I have 2 files orders (1 heading, 1 detail):
- COM_COMMANDES = heading,
- COM_COMMANDES_LIGNES = D2TAIL,
COM_COMMANDES_LIGNES depends on COM_COMMANDES.
When I make an INSERT INTO in COM_COMMANDES, it makes me creation well.
On the other hand, when I make an INSERT INTO in COM_COMMANDES_LIGNES, it creates me a recording BUT not with the identifying good (that created in COM_COMMANDES).
Result: I have well the order copied but without the lines.
Thank you to help me because I do not manage to regulate this problem.

Hi,
I have developed a example form and tested, and its works as your requirement.
i have created a table with three three fields and the same data as u mentioned in post.
I the button just paste the code and hope it will work.
declare
     cursor c_test is select name,city,group_no from TEST_EXAMPLE;
begin
     go_block('XXNEXTBLK');
for C_test_rec in C_test
loop
     :XXNEXTBLK.NAME := C_test_rec.name;
     :XXNEXTBLK.CITY := C_test_rec.city;
     :XXNEXTBLK.GROUP_NO :=C_test_rec.group_no;
     next_Record;
end loop;
FIRST_RECORD;
--go_block('LC_REQ_BLK');
Exception
     when too_many_rows then
     null;
     when others then
     null;
end ;
declare
cursor c_test1 is select name,city,group_no from TEST_EXAMPLE;
begin
     go_block('XXNEXTBLK');
if :XXNEXTBLK.GROUP_NO =1 then
     last_record;
     create_record;
          for C_test1_rec in C_test1
loop
     :XXNEXTBLK.NAME := C_test1_rec.name;
     :XXNEXTBLK.CITY := C_test1_rec.city;
     :XXNEXTBLK.GROUP_NO :=C_test1_rec.group_no+1;
     next_Record;
end loop;
FIRST_RECORD;
end if;
end;
Check it, if any issue just send a mail to [email protected], ill forward the fmd to you.
Thanks & Regards
Srikkanth.M

I only get one audio channel when i make a rough cut.

Hey everyone,
when I'm making a rough cut with my subclips in Adobe Prelude, he combines my two audio channels into one track. Even when i export my subclips to Premiere Pro I also get one audio track with two audio channels in it. What am I doing wrong?
I'm working on Mac and Prelude CC 2014 and Premiere Pro CC v8.1.
Can somebody help me?
Sven Jansen
Junior Video Editor
The Netherlands

Hi Sven,
You are doing nothing wrong here. If you will expand the audio track in both Prelude and Premiere, you can see that both the audio channels are in place. Its just the difference in the way the channels are being represented in Prelude timeline and rought cut.
Please let me know if you are loosing any of your audio channel.
Thanks,
Ramesh.

Only internal mic reords even when line in selected

Hi all
I hope some one cane help with this frustrating problem, I have purchased a 15" MacBook Pro with 2gig HDDR, I have recorded guitar successfully in the past, but recently updated GBand to 3.0.4 (104.7) now when I select an instrument channel, it only records from the internal Mic even when I select, Line In from the System Prefrences, the input registers on the input level meter in the system prefrences pane, but not in the Garageband mixer display, and when I press record GBand only records from interlnal Mic. I have selected all inputs on track info, and have moved slider as far as I can, but still no sound is registered on track, I did notice when I came back to do some more work on one project a panel popped up to say that song had not been saved in iLife? it asked if I wanted to do so so I pressed ok, hope this did not cause problem?
MacBook pro Mac OS X (10.4.8) 2GB 667 MHz DDR2 SDRAM

You have to select line-in in GarageBand's
preferences. (That's a difference between Intel Macs
and Power PC Macs.)
Hi Christoph,
I've had the Apple set up for a few weeks, I'm trying ti figure things out for myself. I'm a bit stumped...
I've got this same prob (amongst a few others...) I've got the iMac, and can't turn the internal mic off either. I'm a wee bit lost mate, have you any ideas?
Thanks for your time...

Why is my battery life so short? Like one day, even when I'm not using it.

I've had this I phone only a little over a month and hardly used it at all. The battery is lasting a shorter and shorter time. Now it's down to about a day and a half, even when only on standby.

You say you've had the phone a little over a month, but your profile says it's an iPhone 3G. Did you mean 3Gs? The iPhone 3G came out in 2008 and hasn't been sold in over a year. If you got it used, it's entirely possible the battery is losing its ability to hold a charge. They can only take so many charge cycles.

How to enter MR results only on one register even when other reg r MR relev

Similar Messages

Maybe you are looking for