How to enter my passcode when activated the voice over

I activated the voice over and enter my passcode

Press the Home Button 3 Times
iPad: Configuring accessibility features (including VoiceOver and Zoom)

Similar Messages

How to unlock ipad with voice over?I even entered my correct password byt the voice over kept on saying it's wrong? 0409 is my password how come its wrong.. and the voice over kept on saying zero has no value?

how to unlock ipad with voice over and password? i already entered my correct password the voice over kept on saying its wrong..my password is 0409.. and the voive over says"zero" has no value?

Turn off VoiceOver
1. Press the Home button
2. Tap Settings.
3. Then double-tap Settings.
4. Tap General.
5. Then double-tap General.
6. Use three fingers on the screen to scroll to Accessibility
7. Tap Accessibility.
8. Then double-tap Accessibility
9. Tap VoiceOver
10. Then double-tap VoiceOver.
11. Tap "On" next to VoiceOver
12. Then double-tap "On" to turn it off.

I activated the voice over and now can not deactivate the voice response, phone does not scroll down keeps reading

i activated the voiceover feature and now i can not deactivate the feature. from general it keeps going reading and does not scroll

Turn it off using iTunes, as described here: http://support.apple.com/kb/HT3577. If your colors are inverted, also go to Settings>General>Accessibility and turn Invert Colors to Off.

I have the I pad 3. I have noticed that when in the voice over mode that I cannot Hear any clicks or boundary sounds. The VoiceOver works. Is there a setting that I can change to put these sounds back?

I don't hear the cursor sounds and boundary sounds while using voice over. Is there a way to fix this in settings? I have I Pad 3.

you need camera raw 6.7 or better.
i don't know what version of ps you have so i can't say if it can be updated to use that, but update anyway.
pre cc updates: http://www.adobe.com/downloads/updates/
cc updates: http://prodesigntools.com/adobe-cc-updates-direct-links-windows.html
cc 2104 updates: http://prodesigntools.com/adobe-cc-2014-updates-links-windows.html
if you can't update your cr sufficiently, use the dng converter. DNG Converters:
Win
Mac

I was updating my ipad 2 and got it disconnected and its not responding,giving a blank screen with apple logo. when i connect it to itunes then it is giving an error that enter your passcode but the screen is blank how can enter my passcode?

I was updating my ipad 2 and got it disconnected and its not responding,giving a blank screen with apple logo. when i connect it to itunes then it is giving an error that enter your passcode but the screen is blank how can enter my passcode?

What to Do When Your iPad Won't Turn On
http://ipad.about.com/od/iPad_Troubleshooting/ss/What-To-Do-When-Your-Ipad-Wo-No t-Turn-On.htm
iOS: Not responding or does not turn on
http://support.apple.com/kb/TS3281
iPad Frozen? How to Force Quit an App, Reset or Restart Your iPad
http://ipadacademy.com/2010/11/ipad-frozen-how-to-force-quit-an-app-reset-or-res tart-your-ipad
iPad: Basic troubleshooting
http://support.apple.com/kb/TS3274
iOS: Resolving update and restore alert messages
http://support.apple.com/kb/TS1275
iPad: Unable to update or restore
http://support.apple.com/kb/ht4097
 Cheers, Tom

How to enter a credit memo with the funds returning to the PO

Hi Guys,
This is my first post on here, not sure if I am posting this question in the correct area however hope you can help.
I have a number of credit notes from a vendor which need to be entered, we usually enter these in MIRO which is fine but what I am after is how to enter these credit notes so the funds return to the Purchase Order for further use.
For example, say the limits on the PO looked like this:
Overall limit: 10,000
Expected Value: 10,000
Actual Value: 10,000
So we have had invoices for the entire 10,000. Is there a way I can enter a credit for say 5,000 so the limits would then look like:
Overall limit: 10,000
Expected Value: 10,000
Actual Value: 5,000
We are hoping there is a way so we can avoid having the PR/PO increased, which has also gone above the contract ceiling.
Usually with credits we would enter them as a credit memo if we wanted to change the qty and price, and a sub credit if we just needed to amend the price leaving the qty as is. By doing it this way the funds don't actually return to the PO like in the example above, what does happen is when we pull up the PO in MIRO we can access the "credited" funds at that time. We would like to see the funds back on the actual PO, not sure if this can be done though, any help or suggestions would be appreciated.
Thankyou

Hello Pistol,
This question is related to PO's then it belongs in one of the FI forums.
This is the forum for SAP Solution Manager which is the software SAP's support strategy is based upon.
You have posted in the wrong forum.
I would recommend closing this thread, and looking for a more appropriate forum to raise this question.
I hope this is helpful.
Regards,
Paul

HT1212 How do I reset passcode when ipad is disabled

how do I reset passcode when Ipad is disabled

Restore, if iTunes will let you. Everything except the password will be restored. Connect via cable to the computer that you use for sync. Be forewarned that it takes a long time. From iTunes, select the iPad/iPod and then select the Summary tab. Follow directions for Restore and be sure to say "yes" to the backup. You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod. Again, say "yes."
At the end of the basic Restore, you will be asked if you wish to sync the iPad/iPod. As before, say "yes." Note that that sync selection will disappear and the Restore will end if you do not respond within a reasonable time. If that happens, only the apps that are part of the IOS will appear on your device. Corrective action is simple - choose manual "Sync" from the bottom right of iTunes.
If you're unable to do the Restore, go into Recovery Mode per the instructions here. Also, if you have IOS-7, read this.

Javaw.exe hangs when activating the console

When activating the console in WebStart, it looks like WinXP doesn't release javaw.exe, even when the application gets closed. This never occurs when the console is not activated.
A possible bug ?
- Pierre-Yves

I have searched so many forums and every body (if any at all) state I need to edit my code to sort this out. Well here's a shocker! :) i dont write any code. I am installing J2RE1.4.1_02 and unfortunately due to our other applications, can only use this version. I am installing it on XP images and so far have only had a 60% success rate. Could there be an application installed or a process that is preventing the console from opening? I noticed the way the data is entered into the registry is slightly different from the successful ones. Is there a work around?
Please I am desperate as I am installing this onto 400 PC's.

How to enter a specific vendor for the delivery costs in purchasing order?

Now I want to create a purchasing order including planned deliver costs such as Freight, Coustoms ect, as the vendor of such planned deliver costs is different from the goods supplier, then How to enter a specific vendor for the delivery costs in purchasing order? That means the partner for invoice partner will be two vendors at least in one purchasing order. thanks very much.

No one would like to answer this question?
Message was edited by:
King Qi

hi,
You can have vendor at each condition record level.
try it out.
cheers
Rav

Error when activating the master data

Hi
I am getting the following error when activating the master data. when using IDOC as transfer method in transfer rules
Error while creating table 'EDISEGMENT' entry '/BIC/CIRB0CLASS_NUM_TEXT'
If anyone came across this kind of problem plz share the solution.
Regards
Annie

Hi
I solved the problem. AFter changing from PSA to IDOC, i just saved first and activated. it got activated. But thanks for the response.
There are no short dumps in ST22
Regards
Annie

Does anyone Know how to fix error 0xe8000065 when connecting the ipod touch 4g

does anyone Know how to fix error 0xe8000065 when connecting the ipod touch 4g

See:
iPhone, iPad, iPod touch: Unknown error containing '0xE' when connecting

HT1369 how to connect through itunes when activating?

how to connect through itunes when activating?

See if this helps
http://store.apple.com/us/help/iphone#carrier_info
Browse down to "Activate your iPhone"

How to hide system tables when using the Oracle SQL Developer?

Hi,
I would like to know how can I show only the tables that I created under the Tables tree? I didnt find a way to create a separate database using the Oracle Sql Developer. I see all the tables together, and would like to differentiate between different databases.
Can anyone explain to me how to do these things?
Thanks,

Hi,
I would like to know how can I show only the tables that I created under the Tables tree? Your posting is not clear,again tell something more on tables tree,what u want to achieve with it.
How to hide system tables when using the Oracle SQL Developer? if u connected with sys, system or user with dba role then u have a privilege to see these tables,so revoke the privilege/role from ur user to view this tables if ur connected other then sys,system,
I didnt find a way to create a separate database using the Oracle Sql Developer. DBCA is a tool for creating the new database.
Kuljeet

Issue related with the Date Format --- error when activating the DSO

Hi Friends..
plz help me to fix the issue ...im getting when activating the DSO...
Actually im not getting error when loading the data thru DTP..im facing this issue while activating the DSO..
is there any routine to solve this or i have to go for data selection in info package ......
I have searched in the forum also..but im not able to fix..plz help
Error when assigning SID: Action VAL_SID_CONVERT, InfoObject 0CRMPOSTDAT*
Value '31122009' of characteristic 0DATE is not plausible
Error when assigning SID: Action VAL_SID_CONVERT, InfoObject ZKITRDT*
Value '01/20/20' of characteristic 0DATE is not a number with 000008 spaces
Error when assigning SID: Action VAL_SID_CONVERT, InfoObject ZMNS_DATE*
Value '20101502' of characteristic 0DATE is not plausible
Error when assigning SID: Action VAL_SID_CONVERT, InfoObject 0CRM_EXCDAT*
Value '31122009' of characteristic 0DATE is not plausible
Error when assigning SID: Action VAL_SID_CONVERT, InfoObject 0CRM_PRIDAT*
Value '31122009' of characteristic 0DATE is not plausible
Error when assigning SID: Action VAL_SID_CONVERT, InfoObject ZCOMPDAT*
Value '31122009' of characteristic 0DATE is not plausible
Error when assigning SID: Action VAL_SID_CONVERT, InfoObject ZDUEDAT*
Value '20101402' of characteristic 0DATE is not plausible
Thanks
Baskar
Edited by: tjgnanabaskar on Aug 6, 2010 5:35 PM

Hi Friends..
plz help me to fix the issue ...im getting when activating the DSO...Actually im not getting error when loading the data thru DTP..im facing this issue while activating the DSO..is there any routine to solve this or i have to go for data selection in info package ......I have searched in the forum also..but im not able to fix..plz help
Error when assigning SID: Action VAL_SID_CONVERT, InfoObject 0CRMPOSTDAT
Value '31122009' of characteristic 0DATE is not plausible
Error when assigning SID: Action VAL_SID_CONVERT, InfoObject ZKITRDT
Value '01/20/20' of characteristic 0DATE is not a number with 000008 spaces
Error when assigning SID: Action VAL_SID_CONVERT, InfoObject ZMNS_DATE
Value '20101502' of characteristic 0DATE is not plausible
Error when assigning SID: Action VAL_SID_CONVERT, InfoObject 0CRM_EXCDAT
Value '31122009' of characteristic 0DATE is not plausible
Error when assigning SID: Action VAL_SID_CONVERT, InfoObject 0CRM_PRIDAT
Value '31122009' of characteristic 0DATE is not plausible
Error when assigning SID: Action VAL_SID_CONVERT, InfoObject ZCOMPDAT
Value '31122009' of characteristic 0DATE is not plausible
Thanks
Baskar

How to raise mail notification when ever the new event is added to calendar list in sharepoint 2010?

Hi experts, I need guidance or the way how we can raise mail,
When ever the new item is added / updated / deleted / cancelled to a calendar list in SharePoint 2010.
Shall we achieve it through using SharePoint designer 2010.
If its help to fix the requirement.
Thanks and Regards,
Dhayanand Kalimidi

>I need to send the mail before 1 week from the date
This is different requirement. Initially you said you want send email when item is added / updated / deleted in list. For this you can use default alert to send instant email as suggested before.
Now if you want to send reminder email then you can use designer WF and calculate the due date by using variable. Refer this link for your ref:
http://mysharepointchronicles.wordpress.com/2012/11/05/sharepoint-list-with-workflow-email-reminder-set-to-send-30-days-from-created-date/
http://social.msdn.microsoft.com/Forums/sharepoint/en-US/3211ee00-92de-47f1-b611-4c9609f92ab7/how-do-i-set-sharepoint-2010-to-send-a-reminder-email-a-month-after-a-date-already-listed?forum=sharepointdevelopmentlegacy
Remember event receiver can not send reminder email or scheduled email so for this either use designer WF or create timer job.
Hope it could help
Hemendra:Yesterday is just a memory,Tomorrow we may never see
Please remember to mark the replies as answers if they help and unmark them if they provide no help

How to enter my passcode when activated the voice over

Similar Messages

Maybe you are looking for