How to enter option chosen during interactive VRS ...

Does anyone know how one can enter response when Voice Response System call asks "press 1 for English, press 2 for..."

If you take look at the screen during a call, you will see a keypad icon  , tapping on that icon will enable the numeric keypad, so you can press the required numbers.
The silence will fall

Similar Messages

  • How to Display "Advanced Startup Options" Menu during Boot (NOT Restart)

    How do I get to the "Advanced Boot Options" menu when booting WSE2012? I currently cannot boot from the system drive, the installation DVD or a bootable USB installation drive since the September 19 Microsoft updates were installed. I cannot
    do a "restart" to get there since I cannot get into WSE2012 at all in the first place. No matter how I boot the system, I can never get past the "logo/progress circle" screen. I want to restore a system backup from before September
    19 but cannot figure out how to do it since I cannot get to the "Advanced Boot Options" screen. I searched through my ASUS UEFI BIOS for an option to restart with the advanced menu displayed but could NOT find any setting for this. I am totally lost.
    How can I do a system restore (i.e., recovery)? Please HELP!
    Denis W. Repke

    I've pretty sure I read that Microsoft removed the "F8" feature in Windows 8 and Windows Server 2012. In any case, I did try "F8" a couple of times on WSE2012, pressing and releasing it numerous times during the boot process, starting well before Windows
    started to load -- and it did NOT do anything.
    I also was amazed that the system would not boot from the WSE2012 installation disk from either of my DVD drives nor from a bootable USB drive containing the install files. Until this incident, I never had a problem booting from a "bootable" DVD or
    USB drive on that server. It is also very easy to bring up the "Boot Menu" from my ASUS UEFI BIOS during the boot from which I can select precisely what boot device I want to use.
    As I explained in detail in my earlier post on this forum, the only way I was able to get to the "Advanced Startup Options" screen was by swapping SATA ports for my system disk which "somehow" caused the next boot to automatically start "Auto-Recovery" mode
    which finally allowed me to get to the "Advanced Startup Options" screen and recover the system files from an earlier date. After doing this, the system rebooted without issues. After booting, I ran a set of backups after using Windows Update. Then, I powered
    down,"unswapped" the SATA ports and rebooted. No problems.
    This was all very weird and frustrating. I still cannot believe that there is apparently no way to "directly" get to the "Advanced Startup Options" screen during a hard boot. If there was, recovery would have been simple instead of several days of frustration
    with a "dead" home server.
    Denis W. Repke

  • How to enter 2nd Electronic Signature?

    We recently instituted electronic signature for our Engineers using Acrobat X Pro and a third party certification. The plan is for the first engineer to sign the PDF document and email it to the second engineer for his signature and approval. The system works well when we convert a Word document to PDF, which shows the PDF Producer (File => Properties) as Adobe PDF Library. However, when we use an interactive Acrobat document generated by our publications department, it shows the PDF Producer as Adobe LiveCycle Designer ES 9.0. With the latter document, the first engineers can sign the document, but in the "Sign Document" dialogue box the "Lock Document After Signing" option is not available. As the result, the document is locked by the first person who signed it and the second person cannot sign it.
    Is there an option to select to enable the second person to sign the document if it is generated by Adobe LifeCycle Designer?

    George,
    Thank you for your reply. We ended up creating actual signature fields in Adobe LiveCyle on the documents and routed them to our engineers for their signatures. It worked great.
    Date: Wed, 2 Jan 2013 17:29:16 -0700
    From: [email protected]
    To: [email protected]
    Subject: How to enter 2nd Electronic Signature?
        Re: How to enter 2nd Electronic Signature?
        created by George Johnson in Security & Digital Signatures - View the full discussion
    I suspect you're dealing with a dynamic XFA form and attempting to place an additional signature, as opposed to signing a preexisting digital signature field. It should work if the form has as many digital signature fields as will be needed. It won't otherwise. Note that if the form is a dynamic XFA but it doesn't need to be (e.g., because you're not adding or autoexpanding fields at run-time), then you might be able to create it as a static XFA form and then users will be able to place as many signatures as is needed.
         Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/4963577#4963577
         Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4963577#4963577
         To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4963577#4963577. In the Actions box on the right, click the Stop Email Notifications link.
         Start a new discussion in Security & Digital Signatures by email or at Adobe Community
      For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

  • If physicaly checked the stock found zero. how to enter stock zero in systm

    if physicaly checked the stock found zero. how to enter stock zero in system
    thanx

    Hi
    You can follow the following physical Inventory transaction for updating ZERO stock in the system.
    Please go with following transaction
    MI01>Create physical inventory document>Enter Document Date>Planned count date>Plant Code>Storage Location>Click on Enter button>you will get the separate screen>Enter material code>and click on SAVE button (Ctrl+S)>you will get Physical inventory document number. (MI02-Use for delete)
    (After getting Physical inventory document number you go with MIO4)
    MI04>click on enter button>you will get "Enter inventory count screen>Enter Phys. inventory doc.no>Fiscal year>Count date>click on enter button>you will get separate screen>Enter physical qty>and click on save button ((Ctrl+S)>you will get massage from the SAPu201D Count entered for phys. inv. doc. 100000112"
    (After completed above transaction you please go with MI07)
    MI07>you will get Post inv.differences: initial screen>Enter Phys. inventory doc.> Fiscal year> Posting date>click on enter button>you will get separate screen with deference qty>click save button (Ctrl+S)> you will get document number generated from the system (Diffs in phys. inv. doc. 100000112 posted with m. doc. 4900001246)
    Physical Inventory:
    Physical Inventory is a business process in which physical stock is matched with book (system) stock. It is legal requirement to carry out physical inventory at least once in a year.
    Physical inventory can be carried out both for a companyu2019s own stock (Unrestricted, Quality, Blocked Stock) and for special stocks (Customer Consignment stock, Vendor consignment stock from vendor, Returnable packaging). This inventory is carried out saperately for both type of stocks.
    Physical Inventory Processes:
    Several inventory processes available for physical inventory which includes as follow:
    1. Periodic Physical Inventory
    o All stocks of the company are physically counted on the balance sheet key date
    o Every material must be counted
    o Entire warehouse must be blocked for material movements during count.
    2. Continuous Physical Inventory
    o Stocks are counted continuously during the entire fiscal year.
    o It is important to ensure that every material is physically counted at least once during the year.
    3. Cycle Counting
    o In this method of physical inventory, inventory is counted at regular intervals within a fiscal year.
    o These intervals (or cycles) depend on the cycle counting indicator set for the material in Material Master record as CC indicator in plant view data.
    o With this Cycle Counting Method of Physical Inventory allows fast-moving items to be counted more frequently than slow-moving items.
    4. Inventory Sampling
    o Randomly selected stocks of the company are physically counted on the balance sheet key date.
    o If found not much variance between the counted stock and the book book stock, it is presumed that the book inventory balances for the other stocks are correct.
    Physical Inventory Process Cycle Flow
    1. Creation of physical inventory document
    - Physical inventory document(s) is created individually or using the batch program, click for more information
    - The transaction codes for creation physical inventory are as follow
    Individual Inventory documentation creation
    MI01 - Individual physical inventory creation
    MIS1 - Inventory Sampling document creation
    MICN - Cycle count inventory document creation
    Collective Inventory document creation
    MI31 - Own stock without special stock
    MIK1 - Vendor consignment
    MIQ1 - Project stock
    MIM1 - Returnable Transpiration material
    MIW1 - Customer Consignment stock
    MIV1 - Returnable material with customer
    MIO1 - Material provided to Vendor (Subcontracting material)
    2. Print physical inventory document
    - Physical Inventory document can be printed based on the physical inventory document status and or item status
    - Transaction code MI21 is used to print the inventory document where print default value can be populated
    3. Count the physical stock
    - Based on the inventory document printout, the warehouse person will check the stock of material physically and note that on print out. This is completely physical process.
    4. Enter count in system
    - On completion of physical count, the count result is needs to be entered in the system. This can be with reference (using Tcode MI04) or without reference (using Tcode MI04) to the physical inventory document.
    - If count quantity for that material is ZERO then select ZC (zero count) column instead of putting 0 in qty field. If 0 is used for zero count then systm will consider that as "not counted"
    5. Analyze difference
    - Once count is posted in the system, difference analysis can be carried out using transaction MI20
    - The output gives information based on the input criteria i.e. physical inventory document, plant, material etc.
    - The output gives information about the book quantity, Counted quantity, difference in quantity and value.
    - From this output list, you can carry out further process ie initiate recount, change count quantity, post difference
    6. Initiate recount and follow the steps 3,4,5
    - If found unacceptable difference, recount is initiated using directly from difference analysis list (transaction code MI20) or using transaction code MI11.
    - New inventory document will be created for selected items or for entire document
    - The original document items will be deactivated once recount is initiated so original document will not be available for further process.
    - On initiating recount, you need to process same as for new count document.
    7. Post the difference
    - Several options are available for posting difference
    - Post difference after count is posted using transaction code MI07
    - Posting the count and inventory differences using transaction code MI08, here you have created physical inventory but not counted so with this you can count and post difference in sinle step.
    - Entering the count without a document reference using trasnaction code MI10, with this you can create inventory document, enter the count and post difference in single step.
    some more points for posting difference
    - Posting period must be open to post inventory difference.
    - The fiscal year is set by specifying a planned count date when creating a physical inventory document.
    - Tolerence to crear difference per user group can be set in customization.
    - The system will generate material document for the difference qty and post the value to appropriate account (for valuated stock)
    - The movement type in material document will be 701 or 702 based on gain or loss of material.
    Serial Numbers in Physical Inventory
    If material is managed with serial number then it is possible to carry out physical inventory for material with serial number. There are some pre-requisite before you carry out physical inventory for serialized materials.
    - Serial number profile must be maintained in the material master.
    - the serialization procedure MMSL (maintaining goods receipt and goods issue documents) has to be assigned to serial number profile.
    - The stock check indicator in the serial number profile should be configured.
    - Maintain basic settings for the serial numbers in customization for Serial Number Profile.
    - Configure serial number management for physical inventory in the Settings for Physical Inventory step in Customizing for Inventory Management.
    Blocked Stock Returns are the stock which is return stock from Customer or the stock which can be return back to vendor. To restrict the usage of this stock mostly business do transfer posting for this mateial as BLOCKED stock
    Thanks & Rgds,
    Rajesh

  • Create a dynamic form where selected text boxes appears, based on options chosen in a drop-down box

    HELP!!! Can anyone please provide some guidance on how to create a dynamic form where selected text boxes appears, based on options chosen in a drop-down box.
    I have a form which – based on the department that's selected from a drop-down box – will have different form fields/text boxes, etc, made available.
    Is this possible in LiveCycle, if so, can you please provide the script/info - as needed.
    Thanks,

    In the preOpen event of the second dropdown list you put something like (in formCalc):
    if (dropdown1 == 1) then
    $.clearItems()
    $.setItems("Year, 2 Year,  3 Year")
    elseif (dropdown1 == 2) then
    $.clearItems()
    $.setItems("3 Year,  4 Year")
    endif

  • How to create optional parameters in discoverer 10.1.2

    I am new to discoverer, Can any one tell me how to create optional parameters in Discoverer desktop edition in 10.1.2
    I looked at the following thread which says optional parameters can be created in 10.1.2 but doesn't tell how tro create it
    How to create optional parameters in Discoverer
    Thanks in Advance

    Hi.
    In the thread you quoted Michael Armstrong-Smith says that optional parameters can be created in Plus but not in Desktop and that's true.
    So your question "how to create optional parameters in Discoverer desktop" is already answered in that thread.
    Assume that it is a typo and you wanted to ask how to create optional parameters in Plus.
    Then the answer is simple: Just uncheck the "Require users to enter a value" checkbox when creating new parameter.
    Regards Jakub

  • How to Enter Text in Report Painter

    Dear Sap Guru's
    I am new to Report Painter i want to add some text under the lead column and then i want to choose Characteristics which i had done but i am not getting any option to simply insert some text under the Lead column in between the Rows.Example.
    Lead Column      Period1 Period2 Period3
    Current Account
    5149107             20,000   10,000 5,000
    5149106             2000       3000   40000
    PRofit Center Account
    254136               4000      2000   1000
    254137               3000      2000    5000
    Please let me know how to Enter Text : Current Account and Profit Center Account in the Report.
    Please send the reply as early as possible as i have to submit the report today.Thanks in advance.
    Regards,
    Abhishek

    Sorry, but this is not related to SAP on Oracle.
    I would try ABAP forum instead.

  • HT5858 ipad ask to enter passcode to restore my ipad. how to enter passcode.

    passcode problem
    ipad ask to enter passcode to restore my ipad. how to enter passcode.

    If the iPad was running iOS 7,  iCloud: Find My iPhone Activation Lock in iOS 7
    http://support.apple.com/kb/HT5818
    How can I unlock my iPad if I forgot the passcode?
    http://www.everymac.com/systems/apple/ipad/ipad-troubleshooting-repair-faq/ipad- how-to-unlock-open-forgot-code-passcode-password-login.html
    iOS: Device disabled after entering wrong passcode
    http://support.apple.com/kb/ht1212
    How can I unlock my iPad if I forgot the passcode?
    http://tinyurl.com/7ndy8tb
    How to Reset a Forgotten Password for an iOS Device
    http://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Device
    Using iPhone/iPad Recovery Mode
    http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
    Saw this solution on another post about an iPad in a school environment. Might work on your iPad so you won't lose everything.
    ~~~~~~~~~~~~~
    ‘iPad is disabled’ fix without resetting using iTunes
    Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
    I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
    Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
    1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
    2. Open iTunes with the iPad disconnected.
    3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
    4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
    5. Click ‘Setup as new iPad’ and then click restore.
    6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
    7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
    8. The first stage in the restore process unlocks the iPad, you are basically just cancelling out the restore process as soon as it reactivates the iPad.
    If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
    ~~~~~~~~~~~~~
    Try it and good luck. You have nothing more to lose if it doesn't work for you.
     Cheers, Tom

  • I installed windows 7 in macbook pro. but its booting only by windows not by mac. how to enter in mac?i installed windows 7 in macbook pro. but its booting only by windows not by mac. how to enter in mac?

    i installed windows 7 in macbook pro. but its booting only by windows not by mac. how to enter in mac?

    Hold Option key when starting - that gives you the option to choose between startup disks.

  • How to add new product in interactive demand planning(IDP)

    Hi gurus,
    How to add new product in interactive demand planning(IDP), can you suggest me, when i click data view in IDP, it will show new product.
    Regards
    babu

    Hi Raj,
    Since the New Product is already in MPOS what you need to do in your Data view is to go to "Selection Window" on the left side of the screen(make sure you dont click on the existing selection ids). Select Product at the top, the planning version will come in the next row and then you again select the Product as charateristic and enter the New product name against the Product(Characteristic) and then save it in case you want it to use for your future references. When you will double cilck on the newly made selection id you will be able to see you product with the keyfigure details in right side.
    Please let me know if it works.
    Thanks,
    Anand.

  • Hi..how we enter standard text for smartform using include text

    hi
    guru
    ..how we enter standard text for smartform using include text..
    i know only using so10 we write text..
    in smartform it asking text-object
                                     text-id,
    so what values we should give to get text

    Hi,
       Do u want to print Standard Text or the Texts that are maintained at the Transaction level.
    If it is standard text , then u use text id as ST or if it is Texts that are maintained at the Transaction level then u have to go to that specific transaction and check for that text , then go to text editor ,in the goto menu u have header data where u get the Text id , text name.... , use them in ur smartform in the INCLUDE text.
    Further u have the option of text modules in smartforms which act as standard texts, so if u r going for creation of standard texts then its better to use text modules.
    Regards,
    Shafivullah Mohammad

  • Workspace : Unexpected error during interactive component execution

    Hi !
    During execution, we have random events where this error appears. It appears for different field names and objects. The error code is displayed in the workspace and this is an excerpt of the workspace log.
    We have 2 workspaces using websphere. We noticed that in the past, a few times this was solved by synchronizing the nodes. I does not get fixed like that anymore.
    Any clues? this same deployed application worked in the past, it was not updated.
    THANKS,
    Regards,
    Matias
    <W>, "May 11, 2011 2:04:59 PM", Default, Main, <2> WebContainer : 0, "Error workspace-1305483686838
    Unexpected error during interactive component execution.
    Caused by: Invalid type for field newProduct . Expected : 'xobject.company.BusinessObjects.Product'. Received : 'Lxobject/company/BusinessObjects/Product;' .
    fuego.web.execution.exception.UnexpectedExecutionException: Unexpected error during interactive component execution.
         at fuego.web.papi.TaskExecutor.execute(TaskExecutor.java:187)
         at fuego.workspace.servlet.ExecutorServlet.doAction(ExecutorServlet.java:117)
         at fuego.workspace.servlet.BaseServlet.doPost(BaseServlet.java:229)
         at fuego.workspace.servlet.BaseServlet.doGet(BaseServlet.java:220)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:743)
         at fuego.workspace.servlet.AuthenticatedServlet.service(AuthenticatedServlet.java:83)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:856)
         at com.ibm.ws.webcontainer.servlet.ServletWrapper.service(ServletWrapper.java:1146)
         at com.ibm.ws.webcontainer.servlet.ServletWrapper.service(ServletWrapper.java:1087)
         at com.ibm.ws.webcontainer.filter.WebAppFilterChain.doFilter(WebAppFilterChain.java:118)
         at com.ibm.ws.webcontainer.filter.WebAppFilterChain._doFilter(WebAppFilterChain.java:87)
         at com.ibm.ws.webcontainer.filter.WebAppFilterManager.doFilter(WebAppFilterManager.java:837)
         at com.ibm.ws.webcontainer.filter.WebAppFilterManager.doFilter(WebAppFilterManager.java:680)
         at com.ibm.ws.webcontainer.servlet.ServletWrapper.handleRequest(ServletWrapper.java:588)
         at com.ibm.ws.wswebcontainer.servlet.ServletWrapper.handleRequest(ServletWrapper.java:524)
         at com.ibm.ws.webcontainer.webapp.WebAppRequestDispatcher.forward(WebAppRequestDispatcher.java:321)
         at fuego.web.execution.servlet.ServletExternalContext.forwardInternal(ServletExternalContext.java:197)
         at fuego.web.execution.servlet.ServletExternalContext.finishExecution(ServletExternalContext.java:103)
         at fuego.xobject.runtime.components.XObjectHtmlRuntimeController.service(XObjectHtmlRuntimeController.java:342)
         at fuego.web.execution.servlet.ServletRedirector$ControllerRedirector.forward(ServletRedirector.java:197)
         at fuego.web.execution.servlet.ServletRedirector.redirect(ServletRedirector.java:58)
         at fuego.web.papi.TaskExecutor.processRedirect(TaskExecutor.java:224)
         at fuego.web.papi.TaskExecutor.execute(TaskExecutor.java:104)
         at fuego.workspace.servlet.ExecutorServlet.doAction(ExecutorServlet.java:117)
         at fuego.workspace.servlet.BaseServlet.doPost(BaseServlet.java:229)
         at fuego.workspace.servlet.BaseServlet.doGet(BaseServlet.java:220)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:743)
         at fuego.workspace.servlet.AuthenticatedServlet.service(AuthenticatedServlet.java:83)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:856)
         at com.ibm.ws.webcontainer.servlet.ServletWrapper.service(ServletWrapper.java:1146)
         at com.ibm.ws.webcontainer.servlet.ServletWrapper.service(ServletWrapper.java:1087)
         at com.ibm.ws.webcontainer.filter.WebAppFilterChain.doFilter(WebAppFilterChain.java:145)
         at fuego.web.filter.SingleThreadPerSessionFilter.doFilter(SingleThreadPerSessionFilter.java:64)
         at fuego.web.filter.BaseFilter.doFilter(BaseFilter.java:63)
         at com.ibm.ws.webcontainer.filter.FilterInstanceWrapper.doFilter(FilterInstanceWrapper.java:190)
         at com.ibm.ws.webcontainer.filter.WebAppFilterChain.doFilter(WebAppFilterChain.java:130)
         at fuego.web.filter.CharsetFilter.doFilter(CharsetFilter.java:48)
         at fuego.web.filter.BaseFilter.doFilter(BaseFilter.java:63)
         at com.ibm.ws.webcontainer.filter.FilterInstanceWrapper.doFilter(FilterInstanceWrapper.java:190)
         at com.ibm.ws.webcontainer.filter.WebAppFilterChain.doFilter(WebAppFilterChain.java:130)
         at com.ibm.ws.webcontainer.filter.WebAppFilterChain._doFilter(WebAppFilterChain.java:87)
         at com.ibm.ws.webcontainer.filter.WebAppFilterManager.doFilter(WebAppFilterManager.java:837)
         at com.ibm.ws.webcontainer.filter.WebAppFilterManager.doFilter(WebAppFilterManager.java:680)
         at com.ibm.ws.webcontainer.servlet.ServletWrapper.handleRequest(ServletWrapper.java:588)
         at com.ibm.ws.wswebcontainer.servlet.ServletWrapper.handleRequest(ServletWrapper.java:524)
         at com.ibm.ws.webcontainer.servlet.CacheServletWrapper.handleRequest(CacheServletWrapper.java:90)
         at com.ibm.ws.webcontainer.WebContainer.handleRequest(WebContainer.java:751)
         at com.ibm.ws.wswebcontainer.WebContainer.handleRequest(WebContainer.java:1478)
         at com.ibm.ws.webcontainer.channel.WCChannelLink.ready(WCChannelLink.java:125)
         at com.ibm.ws.http.channel.inbound.impl.HttpInboundLink.handleDiscrimination(HttpInboundLink.java:458)
         at com.ibm.ws.http.channel.inbound.impl.HttpInboundLink.handleNewInformation(HttpInboundLink.java:387)
         at com.ibm.ws.http.channel.inbound.impl.HttpICLReadCallback.complete(HttpICLReadCallback.java:102)
         at com.ibm.ws.tcp.channel.impl.AioReadCompletionListener.futureCompleted(AioReadCompletionListener.java:165)
         at com.ibm.io.async.AbstractAsyncFuture.invokeCallback(AbstractAsyncFuture.java:217)
         at com.ibm.io.async.AsyncChannelFuture.fireCompletionActions(AsyncChannelFuture.java:161)
         at com.ibm.io.async.AsyncFuture.completed(AsyncFuture.java:136)
         at com.ibm.io.async.ResultHandler.complete(ResultHandler.java:196)
         at com.ibm.io.async.ResultHandler.runEventProcessingLoop(ResultHandler.java:751)
         at com.ibm.io.async.ResultHandler$2.run(ResultHandler.java:881)
         at com.ibm.ws.util.ThreadPool$Worker.run(ThreadPool.java:1497)
    Caused by: java.lang.ClassCastException: Invalid type for field newProduct . Expected : 'xobject.company.BusinessObjects.Product'. Received : 'Lxobject/company/BusinessObjects/Product;' .
         at fuego.io.ObjectSerialization.resolveFieldValue(ObjectSerialization.java:434)
         at fuego.io.ObjectSerialization.customReadObject(ObjectSerialization.java:290)
         at xobject.Moving.BusinessObjects.Agreements.Agreement.readObject(Agreement.xcdl)
         at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
         at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:79)
         at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43)
         at java.lang.reflect.Method.invoke(Method.java:618)
         at java.io.ObjectStreamClass.invokeReadObject(ObjectStreamClass.java:1036)
         at java.io.ObjectInputStream.readSerialData(ObjectInputStream.java:1848)
         at java.io.ObjectInputStream.readOrdinaryObject(ObjectInputStream.java:1755)
         at java.io.ObjectInputStream.readObject0(ObjectInputStream.java:1341)
         at java.io.ObjectInputStream.access$300(ObjectInputStream.java:212)
         at java.io.ObjectInputStream$GetFieldImpl.readFields(ObjectInputStream.java:2108)
         at java.io.ObjectInputStream.readFields(ObjectInputStream.java:548)
         at fuego.io.ObjectSerialization.customReadObject(ObjectSerialization.java:197)
         at xobject.Moving.BusinessObjects.AccountAgreement.readObject(AccountAgreement.xcdl)
         at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
         at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:79)
         at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43)
         at java.lang.reflect.Method.invoke(Method.java:618)
         at java.io.ObjectStreamClass.invokeReadObject(ObjectStreamClass.java:1036)
         at java.io.ObjectInputStream.readSerialData(ObjectInputStream.java:1848)
         at java.io.ObjectInputStream.readOrdinaryObject(ObjectInputStream.java:1755)
         at java.io.ObjectInputStream.readObject0(ObjectInputStream.java:1341)
         at java.io.ObjectInputStream.readObject(ObjectInputStream.java:378)
         at java.util.ArrayList.readObject(ArrayList.java:617)
         at sun.reflect.GeneratedMethodAccessor15.invoke(Unknown Source)
         at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43)
         at java.lang.reflect.Method.invoke(Method.java:618)
         at java.io.ObjectStreamClass.invokeReadObject(ObjectStreamClass.java:1036)
         at java.io.ObjectInputStream.readSerialData(ObjectInputStream.java:1848)
         at java.io.ObjectInputStream.readOrdinaryObject(ObjectInputStream.java:1755)
         at java.io.ObjectInputStream.readObject0(ObjectInputStream.java:1341)
         at java.io.ObjectInputStream.access$300(ObjectInputStream.java:212)
         at java.io.ObjectInputStream$GetFieldImpl.readFields(ObjectInputStream.java:2108)
         at java.io.ObjectInputStream.readFields(ObjectInputStream.java:548)
         at fuego.io.ObjectSerialization.customReadObject(ObjectSerialization.java:197)
         at xobject.Moving.BusinessObjects.Account.readObject(Account.xcdl)
         at sun.reflect.GeneratedMethodAccessor347.invoke(Unknown Source)
         at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43)
         at java.lang.reflect.Method.invoke(Method.java:618)
         at java.io.ObjectStreamClass.invokeReadObject(ObjectStreamClass.java:1036)
         at java.io.ObjectInputStream.readSerialData(ObjectInputStream.java:1848)
         at java.io.ObjectInputStream.readOrdinaryObject(ObjectInputStream.java:1755)
         at java.io.ObjectInputStream.readObject0(ObjectInputStream.java:1341)
         at java.io.ObjectInputStream.readObject(ObjectInputStream.java:378)
         at java.util.HashMap.readObject(HashMap.java:1318)
         at sun.reflect.GeneratedMethodAccessor12.invoke(Unknown Source)
         at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43)
         at java.lang.reflect.Method.invoke(Method.java:618)
         at java.io.ObjectStreamClass.invokeReadObject(ObjectStreamClass.java:1036)
         at java.io.ObjectInputStream.readSerialData(ObjectInputStream.java:1848)
         at java.io.ObjectInputStream.readOrdinaryObject(ObjectInputStream.java:1755)
         at java.io.ObjectInputStream.readObject0(ObjectInputStream.java:1341)
         at java.io.ObjectInputStream.access$300(ObjectInputStream.java:212)
         at java.io.ObjectInputStream$GetFieldImpl.readFields(ObjectInputStream.java:2108)
         at java.io.ObjectInputStream.readFields(ObjectInputStream.java:548)
         at fuego.io.ObjectSerialization.customReadObject(ObjectSerialization.java:197)
         at xobject.Moving.BusinessObjects.Person.readObject(Person.xcdl)
         at sun.reflect.GeneratedMethodAccessor348.invoke(Unknown Source)
         at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43)
         at java.lang.reflect.Method.invoke(Method.java:618)
         at java.io.ObjectStreamClass.invokeReadObject(ObjectStreamClass.java:1036)
         at java.io.ObjectInputStream.readSerialData(ObjectInputStream.java:1848)
         at java.io.ObjectInputStream.readOrdinaryObject(ObjectInputStream.java:1755)
         at java.io.ObjectInputStream.readObject0(ObjectInputStream.java:1341)
         at java.io.ObjectInputStream.access$300(ObjectInputStream.java:212)
         at java.io.ObjectInputStream$GetFieldImpl.readFields(ObjectInputStream.java:2108)
         at java.io.ObjectInputStream.readFields(ObjectInputStream.java:548)
         at fuego.io.ObjectSerialization.customReadObject(ObjectSerialization.java:197)
         at xobject.Moving.BusinessObjects.Account.readObject(Account.xcdl)
         at sun.reflect.GeneratedMethodAccessor347.invoke(Unknown Source)
         at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43)
         at java.lang.reflect.Method.invoke(Method.java:618)
         at java.io.ObjectStreamClass.invokeReadObject(ObjectStreamClass.java:1036)
         at java.io.ObjectInputStream.readSerialData(ObjectInputStream.java:1848)
         at java.io.ObjectInputStream.readOrdinaryObject(ObjectInputStream.java:1755)
         at java.io.ObjectInputStream.readObject0(ObjectInputStream.java:1341)
         at java.io.ObjectInputStream.access$300(ObjectInputStream.java:212)
         at java.io.ObjectInputStream$GetFieldImpl.readFields(ObjectInputStream.java:2108)
         at java.io.ObjectInputStream.readFields(ObjectInputStream.java:548)
         at fuego.io.ObjectSerialization.customReadObject(ObjectSerialization.java:197)
         at xobject.Moving.Views.AbstractView.readObject(AbstractView.xcdl)
         at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
         at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:79)
         at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43)
         at java.lang.reflect.Method.invoke(Method.java:618)
         at java.io.ObjectStreamClass.invokeReadObject(ObjectStreamClass.java:1036)
         at java.io.ObjectInputStream.readSerialData(ObjectInputStream.java:1848)
         at java.io.ObjectInputStream.readOrdinaryObject(ObjectInputStream.java:1755)
         at java.io.ObjectInputStream.readObject0(ObjectInputStream.java:1341)
         at java.io.ObjectInputStream.readObject(ObjectInputStream.java:378)
         at java.util.HashMap.readObject(HashMap.java:1318)
         at sun.reflect.GeneratedMethodAccessor12.invoke(Unknown Source)
         at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43)
         at java.lang.reflect.Method.invoke(Method.java:618)
         at java.io.ObjectStreamClass.invokeReadObject(ObjectStreamClass.java:1036)
         at java.io.ObjectInputStream.readSerialData(ObjectInputStream.java:1848)
         at java.io.ObjectInputStream.readOrdinaryObject(ObjectInputStream.java:1755)
         at java.io.ObjectInputStream.readObject0(ObjectInputStream.java:1341)
         at java.io.ObjectInputStream.defaultReadFields(ObjectInputStream.java:1947)
         at java.io.ObjectInputStream.readSerialData(ObjectInputStream.java:1871)
         at java.io.ObjectInputStream.readOrdinaryObject(ObjectInputStream.java:1755)
         at java.io.ObjectInputStream.readObject0(ObjectInputStream.java:1341)
         at java.io.ObjectInputStream.readArray(ObjectInputStream.java:1670)
         at java.io.ObjectInputStream.readObject0(ObjectInputStream.java:1335)
         at java.io.ObjectInputStream.readObject(ObjectInputStream.java:378)
         at fuego.papi.impl.j2ee.Marshaller.unmarshall(Marshaller.java:46)
         at fuego.papi.impl.j2ee.EJBTaskExecutionResult.unmarshall(EJBTaskExecutionResult.java:73)
         at fuego.papi.impl.j2ee.EJBExecution.next(EJBExecution.java:204)
         at fuego.web.execution.InteractiveExecution.process(InteractiveExecution.java:177)
         at fuego.web.execution.impl.WebInteractiveExecution.process(WebInteractiveExecution.java:54)
         at fuego.web.execution.InteractiveExecution.process(InteractiveExecution.java:223)
         at fuego.web.papi.TaskExecutor.processResult(TaskExecutor.java:266)
         at fuego.web.papi.TaskExecutor.execute(TaskExecutor.java:101)
         ... 59 more
    "

    Hi
    Please let me know, how your exception got resolved ?
    Thanks,
    Brijesh Kumar Singh

  • How to create Option Boxes IN A SELECTION SCREEN

    How to create Option Boxes IN A SELECTION SCREEN.
    Thanks!

    Hi Rajesh,
    The following explanation gives clear picture of what is mean of check box and radio button with coding.....................
    <b>CHECK BOX :</b>
    AS CHECKBOX [USER-COMMAND fcode]
    Effect:
    This addition specifies that the input field in the first position of the selection screen is displayed as a checkbox, with the corresponding description next to it on the right. The checkbox is selected if the value of para is "X" or r "x". Otherwise, it is not selected.
    The parameter must be created with the type c and length 1. An explicit length len is not permitted. If the addition TYPE is used, this can only be followed by the generic type c or a non-generic data type of type c and length 1.
    The addition USER-COMMAND can be used to assign a function code fcode to the parameter. The function code fcode must be directly specified and may have a maximum length of 20 characters. To evaluate the function code, an interface work area of the structure SSCRFIELDS from the ABAP Dictionary must be declared using the statement TABLES. When the user selects the checkbox on the selection screen, the runtime environment triggers the event AT SELECTION-SCREEN and transfers the function code fcode to the component ucomm of the interface work area sscrfields.
    Notes
    If the TYPE addition is used to make a reference to a data type in the ABAP Dictionary of type CHAR and length 1, and for which t the valid values in the domain are defined as "X" and " ", the parameter is automatically displayed as a checkbox on the selection screen.
    If the addition USER-COMMAND is specified without the addition AS CHECKBOX, and the parameter is of type c with length 1, it is also displayed as a checkbox.
    The addition USER-COMMAND can, for example, be used for screen modifications with the addition MODIF ID (see example).
    <b>Coding :</b>
    PARAMETERS show_all AS CHECKBOX USER-COMMAND flag.
    SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME.
    PARAMETERS: p1(10) TYPE c,
                p2(10) TYPE c,
                p3(10) TYPE c.
    SELECTION-SCREEN END OF BLOCK b1.
    SELECTION-SCREEN BEGIN OF BLOCK b2 WITH FRAME.
    PARAMETERS: p4(10) TYPE c MODIF ID bl2,
                p5(10) TYPE c MODIF ID bl2,
                p6(10) TYPE c MODIF ID bl2.
    SELECTION-SCREEN END OF BLOCK b2.
    AT SELECTION-SCREEN OUTPUT.
      LOOP AT SCREEN.
        IF show_all <> 'X' AND
           screen-group1 = 'BL2'.
           screen-active = '0'.
        ENDIF.
        MODIFY SCREEN.
      ENDLOOP.
    <b>RADIO BUTTON COMMAND :</b>
    RADIOBUTTON GROUP group [USER-COMMAND fcode]
    Effect:
    This addition specifies that the input field is displayed as a radio button in the first position on the selection screen, and the output field is displayed next to it on the right. The radio button is selected if the value of para is "X" or "x". Otherwise, it is not selected.
    group is used to define the radio button group for the parameter. The name group is entered directly as a character string with a maximum of 4 characters. Within a selection screen, there must be a minimum of two parameters in the same radio button group. There cannot be more than one radio button group with the same name in one program, even if they are defined in different selection screens.
    The parameter must be specified with the type c and length 1. Explicit length specification using len is not permitted. If the addition TYPE is used, it can only be followed by the generic type c or a non-generic data type of type c and length 1.
    In a radio button group, only one parameter can be defined with the addition DEFAULT, and the specified value must be "X". By default, the first parameter in a radio button group is set to the value "X", and the rest are set to " ".
    The addition USER-COMMAND can be used to assign a function code fcode to the first parameter in a radio button group. The function code fcode must be specified directly, and have a maximum length of 20 characters. To evaluate the function code, an interface work area of the structure SSCRFIELDS from the ABAP Dictionary must be declared using the statement TABLES. When the user selects any radio button of the radio button group on the selection screen, the runtime environment triggers the event AT SELECTION-SCREEN and transfers the function code fcode to the component ucomm of the interface work area sscrfields.
    Note:
    It is recommended to define the radio buttons of a radio button group directly underneath each other. If the selection screen also contains other elements, it is recommended to define each radio button group within a block surrounded by a frame.
    <b>CODING :</b>
    tables : mkpf,mseg,ekko.
    SELECTION-SCREEN BEGIN OF LINE.
    SELECTION-SCREEN BEGIN OF BLOCK B1 WITH FRAME TITLE TEXT-001.
    PARAMETER : P_WERKS LIKE MARC-WERKS MODIF ID S1,
                c as checkbox.
    SELECT-OPTIONS : S_EBELN FOR EKKO-EBELN NO INTERVALS MODIF ID S2.
    SELECTION-SCREEN END OF BLOCK B1.
    SELECTION-SCREEN BEGIN OF BLOCK B2 WITH FRAME TITLE TEXT-004.
    SELECTION-SCREEN BEGIN OF LINE.
    PARAMETERS : R1 RADIOBUTTON GROUP G1 DEFAULT 'X' USER-COMMAND UC1.
    SELECTION-SCREEN COMMENT 5(20) TEXT-002 FOR FIELD R1.
    SELECTION-SCREEN END OF LINE.
    SELECTION-SCREEN BEGIN OF LINE.
    PARAMETERS : R2 RADIOBUTTON GROUP G1.
    SELECTION-SCREEN COMMENT 5(20) TEXT-003 FOR FIELD R2.
    SELECTION-SCREEN END OF LINE.
    SELECTION-SCREEN END OF BLOCK B2.
    write :/ p_werks,
           / s_ebeln.
    AT SELECTION-SCREEN OUTPUT .
    LOOP AT SCREEN .
    IF R1 EQ 'X' AND SCREEN-GROUP1 EQ 'S2'.
    SCREEN-INPUT = 0.
    SCREEN-REQUIRED = 1.
    clear s_ebeln[].
    clear p_werks.
    MODIFY SCREEN.
    ENDIF.
    IF R2 EQ 'X' AND SCREEN-GROUP1 EQ 'S1'.
    SCREEN-INPUT = 0.
    SCREEN-REQUIRED = 1.
    clear s_ebeln[].
    clear p_werks.
    MODIFY SCREEN.
    ENDIF.
    ENDLOOP.
    Let me knwo if any doubts.
    <b>Reward with points if it helpful</b>
    Regards,
    Vijay

  • How we enter text for materials in purchase order smartform

    hi guru
    how we enter text for materials in purchase order smartform
    my requirement is create smartform for purchase order.
    in this i have to create item-text, by using which tcode we can give item data
    plz give more expalnation for this plzzzzzzzzz

    Hi,
           You can use read_text function module for readind text of material and store this value in internal table later pass this internal table to smartform will solve your problem.
    otherwise there is direct option for text element property that is include text u can use that also
    Regards
    Gagan

  • How to enter the special character ALT225 - the double S in Germany

    Hi,
    I use the double S of the German keyboard in my wifi password.
    Any idea how to enter it ?
    This is this one : ß
    Thanks,
    Patrick

    touch and hold the "S"...you will get different options for the letter...it must be a lowercase "s" and not and uppercase "S" otherwise you won't get what you are looking for. So, make sure the arrow isn't highlighted

Maybe you are looking for