How to enter the BIOS in Satellite C50-A006

Hi!
I wanted to enter BIOS to select boot sequence in Satellite C50-A006 running with Win8, but I was unsuccessful. I tried pressing F2, F8, F12, ESC and DEL but no luck. Also tried googling, also no luck.
Please help.
Thank you!

Hi
At first you must perform complete shutdown. After doing this you can start machine and enter BIOS settings.
How to perform complete shutdown you can read on - http://aps2.toshiba-tro.de/kb0/TSB2B03EY0002R01.htm
Try it please.

Similar Messages

  • How to enter the BIOS settings on my Satellite L50-A-k4W?

    Help me pls!! How to enter the BIOS settings? I do not know, and Google does not help me =((

    At first you have to perform an complete shutdown.
    Here an HowTo:
    http://aps2.toshiba-tro.de/kb0/TSB2B03EY0002R01.htm
    The point is that Win 8 does not shut down the notebook but the unit performs hybrid shutdown to boot faster. So unit needs to be shut down in order to access the BIOS.
    Start notebook again and press F12 to enter boot menu. Thee you can find option for BIOS settings. You can also try with F2 at start up.

  • Sat 4070cdt: How to enter the BIOS?

    Hi i have a satellite 4070cdt, am I able to enter the bios, if so how please

    Hello Steve
    As far I know it should be possible to enter the BIOS by pressing the ESC and then F1 button.
    Bye

  • Dynabook: How to enter the BIOS settings?

    I have a Dynabook V2/470 CRC. How can I enter the BIOS
    settings on this laptop?

    Hello
    This unit is not known to me but I assume that you can enter BIOS setting pressing F2 button or maybe ESC in combination with F1.
    Bye

  • Tecra 8000 doesn't boot from CD - how to enter the BIOS?

    Hello,
    i have a 2nd hand tecra 8000.
    Now it dont boot from CD? i dont know why... but he question is how to enter on BIOS setup, because is not possible with F2 key.
    How to enter on BIOS?
    Thanks too much
    Francisco
    ([email protected])

    Hi
    Please check this Toshiba FAQ document:
    How to access to the BIOS Setup - instructions for most models
    http://support.toshiba-tro.de/kb0/FAQ6401G1000DR01.htm

  • How to access the BIOS on Satellite A500-1G2

    Hi
    Could you tell me how do you enter the BIOS. I have A500-1G2 laptop. I've upgraded the Bios and i can't get in. Please help me.
    Czarek

    Hi
    You can access the BIOS pressing F2 button immediately after the notebook has been powered up (after power button has been pressed).
    You can press F2 several time to be 100% sure that this worked

  • How to access the BIOS and Satellite L40

    I need to go into the BIOS. How can this be accomplished?
    Cheers,
    Chris

    > Booting from the Win XP CD does not work, regrettably. Something with the SATA driver. Looks like a play to force end users to buy Vista.
    BIG NONSESE!!!!
    You need SATA drivers before you would continue with XP installation!
    I think you should read some threads here before making some assumptions
    On the Toshiba page you will find a Intel Storage Manager
    This package includes the SATA drivers!

  • Toshiba P875 S7102 How To Enter The Bios Setup

    I have been tring everything to get to the bios screen of the computer.  I have tried holding Esc, F1, F2, F10, F12, Delete, but that has not worked.  I have found a toshiba manual that said to hold F2 until you see the toshiba logo then release it.  Nothing has worked, it just continues to boot to windows 8.
    I have searched and searched, this forum and the web, but I have not found anything that has worked to get into the BIOS setup screen.
    What is the proper key stroke to get into the bios screen for P875 S7102 laptop?
    Thanks.

    The "secret" is what you do when shutting down before attempting to access the BIOS.  Press the shift key as you click Shutdown. Then on startup, tap F2 to take you to the BIOS screen.
    This applies to Toshiba laptops that came PRE-INSTALLED with Windows 8. It does NOT apply to Windows 7 machines or those that were UPGRADED from Windows 7 to Windows 8.
    C.B.
    Toshiba Sat. C75D-B7260 Win 8.1 64 Bit--Toshiba Sat. L775D-S7132 Win 7 HP SP1 64 Bit and Win 10 PRO Technical Preview--Toshiba Sat. L305-S5921 Win Vista SP2 32 Bit

  • I can't enter to the Bios - Toshibe Satellite C55-B5287

    Hello,
    I could enter the Bios in the past, but after I installed a new windows, I can't enter to the Bios.
    I tried to click F1-F12 (I know that I need to click F2 or F12, but those keys doesn't work).
    I did a lot of tries, but it isn't working for me.
    Someone know how to solve this problem?
    P.S. - I have the minimum requirments for the game "Titanfall", but when I run it, it's working very slow...
    I have another computer which has low Specifications more than this computer, and titanfall works like a charm there...
    Why does it happen to me?
    Thanks!
    Solved!
    Go to Solution.

    Try this. After starting the laptop so it's begun booting, hold the power button for 10+ seconds to force a hard shutdown. Hold the F2 key down and press the power button to start the computer again. Continue holding F2 even after you pressed the power button. It might take a couple tries.
    - Peter

  • How to access the BIOS setting for H330 to verify VT setting?

    How to access the BIOS setting for H330 to verify VT setting?

    Hello Rho2019 and welcome to community,
    To enter into BIOS, Press and hold the F1 key then turn on the computer. When you hear multiple beeps, release the F1 key.
    Best Regards,
    Tanuj
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution".! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
    Follow @LenovoForums on Twitter!

  • How to enter the values in JTable in runtime

    how to enter the values in JTable in runtime

    Basically you need a vector of vectors or an array of arrays. Example (off the top of my head):
    With Arrays
    String[] cols = { "colone", "coltwo", "colthree", "colfour", "colfive" };
    String[] numbers = { "one", "two", "three", "four", "five" };
    String[] letters = { "A", "B", "C", "D", "E" };
    String[][] data = { numbers, letters };
    //make sure that the table has a scroll pane wrapped around it otherwise the header is not displayed
    JScrollPane scroll = new JScrollPane(new JTable(data, cols));
    With Vectors
    Vector cols = new Vector();
    cols.addElement("colone");
    cols.addElement("coltwo");
    cols.addElement("colthree");
    cols.addElement("colfour");
    cols.addElement("colfive");
    Vector numbers = new Vector();
    numbers.addElement("one");
    numbers.addElement("two");
    numbers.addElement("three");
    numbers.addElement("four");
    numbers.addElement("five");
    Vector letters = new Vector();
    numbers.addElement("A");
    numbers.addElement("B");
    numbers.addElement("C");
    numbers.addElement("E");
    numbers.addElement("F");
    Vector data = new Vector();
    data.addElement(numbers);
    data.addElement(letters);
    //make sure that the table has a scroll pane wrapped around it otherwise the header is not displayed
    JScrollPane scroll = new JScrollPane(new JTable(data, cols));The array or vector can be easily populated at runtime.
    Regards
    Riz

  • How to enter the database in oracle 11g!!

    Hi all,
    I have installed Oracle 11g , and the SCOTT,SYS,SYSTEM account are locked ( I guess) as i am UNABLE TO ENTER THE DATABASE.
    When I open SQL+ , a cmd prompt will appear requesting username ( for which I tried SYS,SYSTEM,SCOTT) upon pressing enter, it request's password ,HERE IS THE PROBLEM .What every i try to enter in the password field, doesn’t get displayed there ,I thick its not accepting anything at all.
    I tried sys as sysdba as the username ,didn't work either(insufficent privilages)(windows info: OS-XP sp2, account- administrator),as I am new to SQL Kindly ,SUGGEST ME , HOW TO ENTER THE DATABASE.
    Thanks & Regards
    keerthi kumar

    SET
    sqlplus
    / as sysdba
    startup
    exit
    THE RESULT FROM THE cmd PROMPT FOR THE ABOVE LINES....
    Microsoft Windows XP [Version 5.1.2600]
    (C) Copyright 1985-2001 Microsoft Corp.
    C:\Documents and Settings\KEERTHI KUMAR>SET
    ALLUSERSPROFILE=C:\Documents and Settings\All Users
    APPDATA=C:\Documents and Settings\KEERTHI KUMAR\Application Data
    CLIENTNAME=Console
    CommonProgramFiles=C:\Program Files\Common Files
    COMPUTERNAME=KEERTHIKUMAR
    ComSpec=C:\WINDOWS\system32\cmd.exe
    DEFAULT_CA_NR=CA18
    FP_NO_HOST_CHECK=NO
    HOMEDRIVE=C:
    HOMEPATH=\Documents and Settings\KEERTHI KUMAR
    LOGONSERVER=\\KEERTHIKUMAR
    NUMBER_OF_PROCESSORS=1
    OS=Windows_NT
    Path=E:\app\KEERTHIKUMAR\product\11.2.0\dbhome_1\bin;C:\WINDOWS\system32;C:\WIND
    OWS;C:\WINDOWS\System32\Wbem;C:\Program Files\Common Files\Teleca Shared;C:\Prog
    ram Files\Smart Projects\IsoBuster;
    PATHEXT=.COM;.EXE;.BAT;.CMD;.VBS;.VBE;.JS;.JSE;.WSF;.WSH
    PROCESSOR_ARCHITECTURE=x86
    PROCESSOR_IDENTIFIER=x86 Family 15 Model 44 Stepping 2, AuthenticAMD
    PROCESSOR_LEVEL=15
    PROCESSOR_REVISION=2c02
    ProgramFiles=C:\Program Files
    PROMPT=$P$G
    P_SCHEMA=D:\Solid Edge V18\etc\UGSchemas
    SESSIONNAME=Console
    SystemDrive=C:
    SystemRoot=C:\WINDOWS
    TEMP=C:\DOCUME~1\KEERTH~1\LOCALS~1\Temp
    TMP=C:\DOCUME~1\KEERTH~1\LOCALS~1\Temp
    USERDOMAIN=KEERTHIKUMAR
    USERNAME=KEERTHI KUMAR
    USERPROFILE=C:\Documents and Settings\KEERTHI KUMAR
    windir=C:\WINDOWS
    C:\Documents and Settings\KEERTHI KUMAR>sqlplus
    SQL*Plus: Release 11.2.0.1.0 Production on Sun Aug 1 07:26:30 2010
    Copyright (c) 1982, 2010, Oracle. All rights reserved.
    Enter user-name: / as sysdba
    ERROR:
    ORA-12560: TNS:protocol adapter error
    Enter user-name: startup
    Enter password:

  • How to enter the currency value Flex mobile

    Hi, friends, I type from Brazil
    how to enter the currency value in textinput
    format BR ( Brazil )?:
    Thank's

    Hello Ashok,
             Using the same BAPI , set the field R_3_USER of the tables parameter TELEFONDATA to 3 to save the mobile number.
    Hope it helps.
    Thanks,
    Sriram S

  • Nokia 1650 - how to enter the person's 2 [two] con...

    i have purchase nokia 1650. I want to know how to enter the phone-numbers or details of person? [like office,home,mobile, email, etc]

    goto particuler contact name->Details->Options->Add Number.
    You can do this only for the contacts which r saved in phone memory. If you have contacts in SIM, you have to move it to phone memory before doing this.

  • Hello. Tell how to enter the program and to start working in it.  I paid, loaded and installed the program Photoshop CC

    help please to start working... with English at me in any way without translator... if somebody can explain in Russian as to start the program, I will be very grateful
    Tell how to enter the program and to start working in it.  I paid, loaded and installed the program Photoshop CC

    Online Chat Now button near the bottom for Activation and Deactivation problems may help
    http://helpx.adobe.com/x-productkb/policy-pricing/activation-deactivation-products.html

Maybe you are looking for