How to enter the domain name in MS Exchange account

When I want to connect my macbook with the companies e-mail what is on an MS Exchange Server I am missing the filed for entering the domain name. This is available in IOS 6 on ipad and iphone but where it is on the OS X?
..by the way: how do I enter an backslash?
Thanks

Hi,
You should not need the domain if you use the recent Exchange server 2007 or 2010.
However if those are not confugured properl and you do need to put it in you should try:
domain\username
( \ is next -left- to the Enter key on your MBP :-)
You may have to use [email protected]
This all is not great though.
Also worth mentioning that you will not be able to connect to Exchange 2003.
Let m kenow if you have more questions.

Similar Messages

How to change the Domain name of portal

Hi All,
We've developed an application using the WDA(Web Dynpro for ABAP) on BI 7.0 and in this we are displaying the BI reports as well. This whole appliaction works fine when we run this on the BI portal 7.0. But when we run it from the Enterprise Portal 6.0
the reports don't show up and it goes in the never ending loop. After research we found that this is happening because the
Domain names of the BI portal and the Enterprise Portal are not the same. And as per one of the SAP note the prerequisite for the WDA application to run on the EP portal is to have the same domain name on both the portals.
Now we are planning to change the domain name on the BI portal.
Does anyone let me know how and where we need to go and change this Domain name ?
Thanks in advance for your help.
Regards,
Alok Varma

Hi,
first step is to configure your DNS server. There has to be a name resolution for portal.domain.tld to your portal server's IP address.
Right now I don't have access to Visual Administrator, so I cannot check if there is any domain specific configation to be done on the server side.
As for the SSO between your Portal and WDA: you'll have to recreate the portal server certificates and import it into the ABAP system.
The Logon Ticket MYSAPSSO2 has to be issued to the new domain by the portal! If not, your browser won't sent this cookie to the BI system and no SSO data will be transmitted to the BI system.
br,
Tobias

How to get the domain name from the System

I need to get the domain name from the system in JDK 1.1.8
Any Ideas?

InetAddress.getLocalHost().getHostName() will get you the name of the computer the code is executed on. If that isn't the "domain name" then perhaps you could give more detail about what "domain" you are trying to find the name of.

How to change the domain name

Our company was bought in an acquisition and for a long time we kept out domain and firewall. Now, we have to move the servers physically and on the new domain. All Oracle servers have been installed with the service of ORANAME.usdv.sdv.com and the TNS names use the same Service tag. The databases created with dbca also get this service extension on install.
I did not find a lot to read about a domain change in Oracle. Looking for an idea on what complications I may expect and how to actually perform the domain change, tips and tricks, some materials to read, etc.
It looks that I have to change the tnsnames.ora on all clients,but is this going to be enough? Do I need to redo netca on clients and servers?
Thanks a lot, mj

Thanks a lot. I'm sorry I did not specify that in my initial post - this was actually what I read but could not find anything more on that...
I have a couple of questions like:
When do I have to alter the database to change tha name - before or after to join to the new domain?
Also, is the statement "ALTER DATABASE RENAME GLOBAL_NAME TO <dbname.new.domain>" the only thing I need to do? It looks that this command never changes the v$parameter value. Do I need to change it and how to do that?
The doc said :"DB_DOMAIN has no effect on the global database name" but it this true?
Also, is this valid for both 10.2.0.2 and above and 9.2.0.7?
Thanks a lot,mj
Message was edited by:
user494147

Business Catalyst Help | Learn how to change the domain name

This question was posted in response to the following article: http://helpx.adobe.com/business-catalyst/using/change-site-domain1.html

A Muse site seems to be automatically hosted on a web basic site. So when you want to give your site the proper domain name, (which is already purchased and added to the BC servers), and have it hosted on your web + plan (or another premium web plan with mail), where is the option for that? As far as I can see, this option is not offered. Do you upgrade it from your premium plan? And if so, how?

How to get the Domain Name of recipient Email ID when the recipient in the Address Book

Hi All,
I am new in Outlook Development and I have stuck in a situation, please find below the situation:
I want to get the recipient domain address when someone is sending the email. Now, the thing is that I am facing the issues when the Email Id is in the address book. For an example "John Smith @live.com" is the email ID but when this email is in
the address book it shows "John Smith ". I’m trying to read out the email address from an Exchange connected Outlook in time of sending the email.
So, my question is how I can get the domain in this situation?
Thanks in Advance..

Hi,
Based on my research, there is no way to change the behavior on Outlook side. Email addresses are resolved to user names by Exchange server which is expected by design.
I'd recommend you post a new question in the Exchange forum to see if we can achieve the goal on Exchange side. For your convenience:
https://social.technet.microsoft.com/Forums/office/en-US/home?category=exchangeserver
Regards,
Steve Fan
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs.

How can i edit the domain name ?

Hello,
I tried to register my first website through business catalyst.The domain name i took was www.wildixel.com . But, when i am trying to open the website it open other website with the same name. I guess it was already taken. Now i want to edit the domain name. Please let me know how can i.
Thanks

Hi there,
Could you please explain more what you are trying to do and have done?
You can not purchase a domain name through Business Catalyst so you would have not obtained a domain you listed there. You have to by it from a domain registra.
If you have just entered a domain into the domain manager of your website but have not purchased the domain, this will not work. You have to obtain the domain first.
If you have got your domain, have you gone into the domain settings of BC and added the domain in? Have you gone to the domain registra and changed either the A-record or the NS records to point to your BC site?

Question on how to Hide the User Name, Password, and Domain fields in the MDT Wizard

MDT 2012 U1
Deploying Windows 7 via Offline Media (ISO) to MS Virtual PC's
I am looking on how to Hide the User Name, Password, and Domain fields which are prepopulated in the MDT wizard via the CS.ini (Not so concerned about the Domain field as I am User Name and Password)
We do need the Computer Name and OU fields to be seen, so skipping the wizard is not a option
The client just does not want these fields to be seen by the end users, they dont want them to even know the account name used for adding the machine to the domain, of course the password is not displayed but it must not be displayed either.
But since we use the fields they must still be fuctional just not seen.
Thanks.....
If this post is helpful please click "Mark for answer", thanks! Kind regards

You shouldn't have to edit DeployWiz_Definition_ENU.xml. You should only need to add "SkipAdminPassword=YES" to the CS.ini file and your authentication information.
Example:
[Settings]
Priority=Default
Properties=MyCustomProperty
[Default]
OSInstall=Y
SkipCapture=NO
SkipAdminPassword=YES
UserID=<MyUserID>
UserPassword=<MyPassword>
UserDomain=<MyDomain.com>
SkipProductKey=NO
SkipComputerBackup=YES
SkipBitLocker=NO
-Nick O.
Nick,
SkipAdminPassword=YES is for:
You can skip the Administrator Password wizard page by using this property in the
customsettings.ini.
I am hidding the Username/Password/and domain field in the computer name Wizard pane which is read from the cs.iniDomainAdmin=xxxxx
DomainAdminPassword=xxxxx
DomainAdminDomain=xxxxxx
JoinDomain=xxxxxx
If this post is helpful please click "Mark for answer", thanks! Kind regards

How do I get IE to drop the domain name from authentication responses

All,
I have a number of internal www servers that run various non MS operating systems which are not tied to the windows domain in any way. They are secure www sites and require authentication.
When I connect to one via IE on a domain joined workstation or server (ie 8 & 9) I am unable to authenticate because I can not remove the domain name from the authentication credentials that IE is passing back to the www server. I get an authentication
prompt for user name & password with the domain pre populated.
How the heck to I get IE to NOT pass the domain name as part of the authentication process. I've tried putting .\ in front of the user name but to no avail.
Thanks,
Steve D.

As you can see below, when you first attempt the auth it defaults to you domain user account... in this case win\username.
When you select use another account, you get the following with no means to remove the domain name which causes auth failure as this www server isn't a domain member and doesn't use the domain for auth.
How do I get rid of Domain: .... ???
Thanks,
Steve D.

The publishing settings page does not open when I click on the domain name and the iWeb application will not stay on the dock.

Hello,
I have been trying to help a friend who is having problems publishing her website. (She has done so previously using Mobile me)
There seem to be a couple of things wrong with the application,
1 if I drag the application icon onto the dock, it won't stay there
2 I wanted to change where her site is published to (she has bought a domain name and has a hosting service now) but when I click on the domain name I do not get the "site publishing settings page" so we can't enter the new details. All that comes up is the main page of her website.
I would suggest uninstalling and re-installing Iweb, to see if that clears the problem, but as Iweb came pre-installed with her Imac, I am not sure that we can do this.
Any ideas please?
she's using and imac 24 in (approx 4 years old) and running osx 10.5.8

NO - not correct. Even if you are still using iWeb 08, you can still publish to another host and not MobileMe. You do this by selecting the option 'Publish to a local folder" and this will publish the site to your desktop and you can then use an ftp programme such as Cyberduck to upload your site to your host.
MobileMe will not be here after the end of June, so you will have to find alternative hosting. They are not taking any new subscriptions.
On new Macs, iLife 11 is pre-installed, but only iPhoto, iMovie and GarageBand are included, not iWeb and iDVD. The Apple Online store is not selling the boxed version of iLife 11 any longer, so if you want to upgrade to iLife, then you'll have to look online at Amazon.com or Amazon.co.uk for a boxed set of either iLife 09 or iLife 11. Both contains iWeb 09, which is what you would want.

How to create two domains name in one active directory domain service .server 2012 ??

Hi there
I want to try sharepoint foundation and office web apps server .
I installed server 2012 sharepoint found 2013 sql server 2012 and create a new forest on active directory domain sevice
now I want to install office web apps server 2013 but when I run the setup said me can't install office web apps server on the domain name that installed sharepoint .
how can I create second domain name on this active directory domain service to install office web apps server ?
help me please I'm new and just want to try sharepoint and office web apps server .
mostly I need to create MS access custom web app and I need the web place to run my access custom web app on this server and because I live in iran can't create and sign up for office 365 and sharepoint online so i'm forced to run them on my system .help
me to complete ths server ?
Greate Regards :
Raha
whit the best regard : Raha

Hi,
For how to Use Office Web Apps with SharePoint 2013, the below links should be what you want to refer to:
Configure Office Web Apps for SharePoint 2013
http://technet.microsoft.com/en-us/library/ff431687.aspx
Video: Configure Office Web Apps for SharePoint 2013
http://technet.microsoft.com/en-us/library/dn455088.aspx
How Office Web Apps work on-premises with SharePoint 2013
http://technet.microsoft.com/en-us/library/ff431685.aspx
In addition, for further assistance for Sharepoint, I suggest you post in the SharePoint forum.
Regards,
Yan Li
Regards, Yan Li

How to put the file name in notepad file

dear frank,
how to put the file name in notepad file via power shell. I mean i want to put the file name in that notepad file
for example,
my file name is ABL and in this file data is
02/06/2015,180.00,182.00,176.01,180.50,1575500
02/06/2015,4.20,4.20,4.20,4.20,500
02/06/2015,113.50,113.70,112.91,113.09,157800
02/06/2015,682.01,695.90,682.00,683.19,4250
02/06/2015,213.98,215.00,213.00,214.87,326200
02/06/2015,21.52,21.65,21.52,21.60,4000
02/06/2015,111.00,111.25,108.25,108.91,17100
02/06/2015,52.00,52.00,52.00,52.00,500
and i want to data in this form
ABL,02/06/2015,180.00,182.00,176.01,180.50,1575500
ABL,02/06/2015,4.20,4.20,4.20,4.20,500
ABL,02/06/2015,113.50,113.70,112.91,113.09,157800
ABL,02/06/2015,682.01,695.90,682.00,683.19,4250
ABL,02/06/2015,213.98,215.00,213.00,214.87,326200
ABL,02/06/2015,21.52,21.65,21.52,21.60,4000
ABL,02/06/2015,111.00,111.25,108.25,108.91,17100
ABL,02/06/2015,52.00,52.00,52.00,52.00,500
There are many file like this that i want to be edit
plese tell me how can i do it, i think it is possible via windows power shell.
thanks in advance.

Hi
Just for completeness, what version of VB.NET are you using?
Here is a complete project to copy all the files with the added "ABL," at the start of each line. You need to start a new Project with a BLANK default Form1, and replace all of Form1 code with the code below. When you run this project, you
need to use the 2 buttons to set up the ORIGINAL file folder and a folder to place the copies. You need to check if the file EXTENSION is correct (I assumed txt), and check the text to add to each line is correct. Once all is set up you should have a
big red button to start the operation.
NOTE: it is important that you try this out on a copy of some of the files to verify accuracy BEFORE trying on original files. Make sure you have a good back up of the original files before doing anything else.
' new project with default BLANK Form1
' replace all Form1 code with this code
' WARNING: make sure you have a backup of
' any files you use this application to
' operate on.
Option Strict On
Option Infer Off
Option Explicit On
Public Class Form1
Dim OrigFileFolderPath As String = Nothing
Dim CopyToFolderPath As String = Nothing
Dim lab1, lab2, lab3 As New Label
Dim tb1, tb2, tb3 As New TextBox
Dim b1, b2, b3, b4 As New Button
Dim fb As New FolderBrowserDialog
Dim bgw As New System.ComponentModel.BackgroundWorker
Private Sub Form1_Load(sender As Object, e As EventArgs) Handles Me.Load
Me.Size = New Size(731, 300)
With lab1
.Text = "Original Files Folder Path"
.Location = New Point(15, 5)
End With
With tb1
.Width = 560
.Location = New Point(10, 30)
.BackColor = Color.Khaki
.ForeColor = Color.Maroon
.Font = New Font(Me.Font.FontFamily, 12)
.BorderStyle = BorderStyle.FixedSingle
.Anchor = AnchorStyles.Top Or AnchorStyles.Left Or AnchorStyles.Right
End With
With lab2
.Text = "Copy Files to Folder Path"
.Location = New Point(15, 125)
End With
With tb2
.Width = 665
.Location = New Point(10, 150)
.BackColor = Color.Khaki
.ForeColor = Color.Maroon
.Font = New Font(Me.Font.FontFamily, 12)
.BorderStyle = BorderStyle.FixedSingle
.Anchor = AnchorStyles.Top Or AnchorStyles.Left Or AnchorStyles.Right
End With
With lab3
.Text = "File Ext"
.Location = New Point(600, 5)
.Anchor = AnchorStyles.Top Or AnchorStyles.Right
End With
With tb3
.Text = ".txt"
.Width = 80
.Location = New Point(590, 30)
.BackColor = Color.Khaki
.ForeColor = Color.Maroon
.TextAlign = HorizontalAlignment.Center
.Font = New Font(Me.Font.FontFamily, 12)
.BorderStyle = BorderStyle.FixedSingle
.Anchor = AnchorStyles.Top Or AnchorStyles.Right
End With
With b1
.Text = "Choose Original Files Folder Path"
.AutoSize = True
.Location = New Point(10, 65)
End With
With b2
.Text = "Choose Copy Files to Folder Path"
.AutoSize = True
.Location = New Point(10, 185)
End With
With b3
.Text = "DO THE COPY"
.AutoSize = False
.Size = New Size(240, 50)
.BackColor = Color.Red
.ForeColor = Color.White
.Font = New Font(Me.Font.FontFamily, 20, FontStyle.Bold)
.Location = New Point(420, 80)
.Anchor = AnchorStyles.Top Or AnchorStyles.Right
.Visible = False
End With
With b4
.Text = "CANCEL JOB"
.AutoSize = False
.Size = New Size(240, 50)
.BackColor = Color.Red
.ForeColor = Color.White
.Font = New Font(Me.Font.FontFamily, 20, FontStyle.Bold)
.Location = New Point(420, 80)
.Anchor = AnchorStyles.Top Or AnchorStyles.Right
.Visible = False
End With
Me.Controls.AddRange({lab1, lab2, lab3, tb1, tb2, tb3, b1, b2, b3, b4})
With bgw
.WorkerReportsProgress = True
.WorkerSupportsCancellation = True
End With
AddHandler bgw.DoWork, AddressOf bgw_DoWork
AddHandler bgw.RunWorkerCompleted, AddressOf bgw_Completed
AddHandler b1.Click, AddressOf b1_Click
AddHandler b2.Click, AddressOf b2_Click
AddHandler b3.Click, AddressOf b3_Click
AddHandler b4.Click, AddressOf b4_Click
End Sub
Private Sub b1_Click(sender As Object, e As EventArgs)
fb.SelectedPath = My.Computer.FileSystem.SpecialDirectories.MyDocuments
fb.ShowNewFolderButton = False
Dim r As DialogResult = fb.ShowDialog
If r = Windows.Forms.DialogResult.OK Then
tb1.Text = fb.SelectedPath
If IO.Directory.Exists(tb1.Text) AndAlso IO.Directory.Exists(tb2.Text) AndAlso Not (tb1.Text = tb2.Text) Then
If tb3.Text = Nothing Then
redo: tb3.Text = InputBox("Enter the file extension that you want to copy/change", "FILE EXTENSION")
If tb3.Text = Nothing Then GoTo redo
End If
b3.Visible = True
Else
b3.Visible = False
End If
End If
End Sub
Private Sub b2_Click(sender As Object, e As EventArgs)
fb.SelectedPath = My.Computer.FileSystem.SpecialDirectories.MyDocuments
fb.ShowNewFolderButton = True
Dim r As DialogResult = fb.ShowDialog
If r = Windows.Forms.DialogResult.OK Then
tb2.Text = fb.SelectedPath
If IO.Directory.Exists(tb1.Text) AndAlso IO.Directory.Exists(tb2.Text) AndAlso Not (tb1.Text = tb2.Text) Then
If tb3.Text = Nothing Then
redo: tb3.Text = InputBox("Enter the file extension that you want to copy/change", "FILE EXTENSION")
If tb3.Text = Nothing Then GoTo redo
End If
b3.Visible = True
Else
b3.Visible = False
End If
End If
End Sub
Private Sub b3_Click(sender As Object, e As EventArgs)
b3.Visible = False
b4.Visible = True
If Not tb3.Text.StartsWith(".") Then tb3.Text = "." & tb3.Text
bgw.RunWorkerAsync()
End Sub
Private Sub b4_Click(sender As Object, e As EventArgs)
bgw.CancelAsync()
End Sub
Private Sub ReadPWFile(fn As String)
Dim filename As String = My.Computer.FileSystem.GetName(fn)
Dim barename As String = IO.Path.GetFileNameWithoutExtension(fn)
Dim copyto As String = tb2.Text & "\" & filename
Dim line As String = Nothing
Dim lines As New List(Of String)
Using sr As IO.StreamReader = New IO.StreamReader(fn)
Do
line = sr.ReadLine()
If Not line = Nothing Then
lines.Add(barename & "," & line)
End If
Loop Until line = Nothing
End Using
Using sw As IO.StreamWriter = New IO.StreamWriter(copyto)
For Each s As String In lines
sw.WriteLine(s)
Next
End Using
End Sub
Private Sub bgw_DoWork(sender As Object, e As System.ComponentModel.DoWorkEventArgs)
Dim ftc As Collections.ObjectModel.ReadOnlyCollection(Of String) = My.Computer.FileSystem.GetFiles(tb1.Text)
For Each f As String In ftc
If bgw.CancellationPending Then
e.Cancel = True
Exit For
End If
Dim ex As String = My.Computer.FileSystem.GetFileInfo(f).Extension.ToLower
If My.Computer.FileSystem.GetFileInfo(f).Extension.ToLower = tb3.Text.ToLower Then
ReadPWFile(f)
End If
Next
End Sub
Public Sub bgw_Completed(sender As Object, e As System.ComponentModel.RunWorkerCompletedEventArgs)
tb1.Text = Nothing
tb2.Text = Nothing
b3.Visible = False
b4.Visible = False
MessageBox.Show("Finished copying files", "Job Completed")
End Sub
End Class
Regards Les, Livingston, Scotland

How to batch change domain name in links

Have several hundred PDF files with links to external files. Links were inserted into Word version prior to PDF'ing. Need a utility or batch tool to update the domain name in the links. For example:
Current link: http://abcserver
Must be changed to this: http://zyxserver
Alternate solution might be to batch update the links in the Word files, then batch process new PDF files. (Need advice on how to do batch update of Word files.)
Greatly appreciate prompt help and suggestions.
I have:
Windows XP
Adobe Acrobat 9 Standard
Office 2007

One of the experts on this forum, Gilad D, has a tool that does this called Batch Edit URL Links here:
http://try67.blogspot.com.au/2010/03/acrobat-batch-edit-links.html

How to specify the target name while deploying a code in OSB-- Plz Help

Hi all,
Am working in creating a cluster environment. For my testing i created a new managed server(OSB_Server) in 9001 port in the admin console itself and that server started running. The default managed server(Admin_Server) is in 7001 port. So when i deploy a code in 7001 sb console the WSDL gets exposed in 7001 because the default admin server port is 7001. While deploying a code in service bus admin console we are not specifying the target name. So how to specify the target name while deploying the code in service bus admin console. Plz help me.
Regards
Prabhu

Hi Prabhu,
There are three kind of server architecture possible for OSB -
1. Single server - Everything gets deployed on Admin server itself
2. Admin Server + Single Managed Server for OSB -- OSB configuration gets deployed on OSB managed server. OSB resources (proxy service, WSDL, Schema) will remain available on OSB managed server port only and NOT on admin server port
3. Admin Server + OSB cluster -- OSB configuration gets deployed on OSB cluster. OSB resources (proxy service, WSDL, Schema) will remain available on OSB Cluster port(s) only and NOT on admin server port
Converting one type of server architecture to any other type, requires a manual tedious process, so it is suggested that you create domain accordingly i.e. if you need clusters then while creating domain itself, create OSB cluster, so that all OSB applications gets deployed to OSB cluster. I will suggest you to create a clustered domain from scratch and import the configuration from your existing domian to this new clustered domain.
You may refer-
http://download.oracle.com/docs/cd/E17904_01/doc.1111/e15022/toc.htm
Regards,
Anuj

How to edit the job name in SM37

Hi All,
I have job in SM37 with the mane ZBI_PROCESSING and the Job in Release status. Now I want to change the Job Name to Z_PROCESSING_SS. Please let me know how to edit the Job Name.
Regards,
Ravi

Hi Ravi,
In SM37 when you have the list of all jobs, right-clic on the job you want to rename, copy, enter the new name.
Then you can delete the first job. The copied one will then be executed.
Regards,
Fred

How to enter the domain name in MS Exchange account

Similar Messages

Maybe you are looking for