How to enter two different ED% in J1ID

Hi All,
For a single material code which is having two different ED%, how to enter Exceptional ED% in transaction code J1ID.
For ex: Material no. XYZ is procured with material type 123 and 789 which is having different ED% of 8.13% and 8.14%.
Regards,
Ram

There cannot be two different material type for same material code.
Pl check & confirm.
Regards
Bhavesh Mistry

Similar Messages

  • How to enter two different arrays into two columns of a multi column listbox

    Hi All,
    I have two different arrays of values suppose 1 array A(1,2,3,4,5) and another array B(3,4,5,6,7). I want to write these to arrays into a multicolumn listbox such that 1st column would be array A and 2nd column would be array B.
    Thnx in advance
    Solved!
    Go to Solution.

    I still couldnt understand how to do it...
    I am posting here my VI. here the 1, 2, 3, 4 are some controls. If i enter any value, the calculated Voltage and current are continously pushed in the array. Now i have display these arrays in the multi column listbox as 1st column be the voltage and second column being the current.
    Attachments:
    manual_graph.vi ‏643 KB

  • How to add two different page numbers in a single page

    How to add two different page numbers in a single page? One is for page number of the whole article, the other one is for page number for each chapter in the article.

    It's quite complicated, see
    Two Page Numbering Schemes in the Same Document.
    Regards, Hans Vogelaar (http://www.eileenslounge.com)

  • How to call two different servlet-url in the same application

    Hi,
    I want to call, consecutively these methods in my application.
    response.sendRedirect(servlet-url1)
    reponse.sendRedirect(servlet-url2)
    but the second method dont answer,
    I think, the first method redirect s with response ,
    but how to call two different servlet ?
    thanks

    if you call the first redirect, the servlet is getting aborted, so you can redirect to the first servlet, working the stuff in it, and then in the second servlet you can redirect to the third servlet

  • How to Maintain two different prices for same material in different qty?

    Dear all,
    How to maintain two different prices for same material in different batch quantities in purchase order(ie.,info record)?
    (Vendor is supplying quantities in 2 different batches & also in different prices)
    Expecting valuable reply.
    Jeyakanthan

    In a PO you can create 2 items, and each item can be maintained with a different price in the conditions.
    In info record it is not possible to have different prices for the same period, except for scales.
    so if you have a price of e.g. 2 USD for 1000 kg and 1,90 USD for 2000 kg then you can maintain this in scales, but you still have to have 2 items in the PO so that each one can individually find its price.
    Alternative you can create contracts (as well with more than one item) to reflect the different prices and batches.

  • How to place two different indesign documents side by side on my desktop in order to copy and paste images and text from one to the other?

    How to place two different indesign documents side by side on my desktop in order to copy and paste images and text from one to the other?

    Or choose Window > Arrange > Tile
    And, you of course can copy/paste without tiling.

  • How to merge two different images in photoshop?

    I am new here. I am starting to learn photoshop.How to merge two different images in photoshop? Please guide me. Thankyou.
    http://www.nissiinfotech.com/

    SPAM

  • How to change two different iCloud account from mac and iPhone?

    How to change two different iCloud account from mac and iPhone?

    Pick one to use, abandon the other.

  • How to add two different database connections on Model

    Hi,
    In my application, I need to create View Objects on different databases. So I need to add two different database connections on the Model.
    But it seems like Model can be connected to only one database. I tried adding another project to add the second db connection. But after I created a read-only View Object in the second project, it didn't generate corresponding data control in the Data Controls panel.
    Could anyone help me on this?
    Thanks!

    Do you mean adding the second project folder in ViewController->Project Properties->Libraries and Classpath?Yes, either that or: ViewController -> Project Properties -> Dependencies
    And I didn't see the first Model project in the ViewController classpath. Otherwise it wouldn't work. The first model project IS in 'classpath'. Here's how:
    ViewController -> Project Properties -> Dependencies
    I tried this and recreated the View Object. Still didn't generate the datacontrol. No idea why you had to recreate the VO.
    Is your VO in an application module inside the SECOND project?
    After you are sure that everything is in the ViewController's classpath, just try restarting JDeveloper.
    This is very basic. has to work.

  • How to use two different network cards on RT?

    Hi everyone... I'm currently working on a project where I have to deal with the issue mentioned in the thread's topic: I have a PC with RT LabVIEW that has to be able to establish network connections using two different network cards. One will be used to connect via TCP/IP with a host computer that will show the data transmitted through shared variables; the other will communicate with another PC through Modbus protocol. The key is that each communication is done through a separate network card.
    So far I haven't been able to figure out how to configure both things to happen. Does anyone know how to do this? Any tips will help.
    For the RT communication I'm using a standard RT project, with the RT PC being given one of the IPs, and for the Modbus part, I created an I/O server with a master and a slave. Separately everything works fine, but when I get them together it simply won't work.
    Thanks for your help!
    Solved!
    Go to Solution.

    Sorry it took me so long to answer, I've been busy lately....I've found a solution to the problem I mentioned, and just in case anyone has similar problems in the future, I'll shortly describe what happened.
    As Caseyw suggested, it was necessary to enable both network cards through the Measurement and Automation Explorer. The cause of the connections malfunction was actually that I wasn't using the "right" protocol for the Modbus communication, which ran on the secondary adapter. The solution was to use the URL protocol with the correct path on the field, addressing the right IP address. To avoid making this post a mixture of topics, I won't elaborate futher, but I got the gist of it, so if anyone is having similar problems whether it is working with several network cards or with Modbus communication protocols, feel free to contact me, I'll be glad to help.
    Thanks

  • How to use two different versions of Firefox at the same time on Snow Leopard?

    I recently upgraded to Firefox 4.0 on my 27" iMac running Snow Leopard 10.6.7.
    Previously, I was using Google's "Page Speed" along with Firebug in Firefox 3.6.15 to optimize images in my web pages, and to find other areas to optimize.
    Page Speed is not yet compatible with Firefox 4.0. I wrote to Google about this some time ago -- no answer yet.
    If I run Firefox 3.6.15 in order to use Page Speed, I run into a few problems afterward when I start using Firefox 4.0 again, since they both use the same "Firefox" folder in my "Application Support" folder.
    How can I set it up so that I can have two separate "Firefox" folders in my "Application Support" folder?
    Or is there an easier way to use two different versions of Firefox simultaneously, even if one has extensions and/or plug-ins installed which are not compatible with the other version?
    Thanks for a great browser!

    Please disregard my question. I just conducted more web search and learned how to use Firefox's profile manager in order to make a separate profile for Firefox 3.6.15.
    You can find instructions on this page:
    http://support.mozilla.com/en-US/kb/Managing%20profiles#os=mac&browser=fx35
    '''A small tip:'''
    If your Firefox app is named anything other than "Firefox" -- say for example "Firefox 3.6.15" -- when you follow the instructions at the above link, make sure you escape the blank space that is before the version number by adding a backward slash before it, when you type the command string in the Terminal. In other words, in that string, you should use this:
    Firefox\ 3.6.15
    I hope that helps someone.
    WW

  • How to use two different ojdbc14.jar for two web application.

    Hi,
    I have two web application running in same tomcat, I need to use the two different ojdbc14.jar for two application, now both are taking the jars from tomcat common/lib directory, I tried copying the new ojdbc14.jar in web-inf/lib folder of one application, but it is not working.
    Could you please let me know whether this will take the jar from tomcat by befault or from web-inf, and a solution how to proceed with this.
    Thanks in advance.

    Yes, I tried removing the jars from common/lib, but as the connection string is mentioned inside the server.xml it is showing db connection error while trying to connect to the database

  • SBO - How to use two different Stock Account within the same Item Group

    Hi,
    I'm currently stuck within one of my implementation.
    I'm deploying the same solution worldwide which worked pretty well until now. All the items are connected to an item group, with a unique GL account, supposed to book at the same time the good receipt and the good issue (Balance-Sheet Account = 14xxxxx).
    My new unit is willing to use two different GL accounts when performing its stock entry (let say 14xxx10) and another GL account for the good issue, let say 14xxx20.
    Do you have any clue so i can please them and keep using at the same time the item group ?
    Thanking you in advance
    Stephane

    Hi,
    In fact, we use the GL account as the HQ Account (Reporting Account) while the "Export Code" will be used to store the local GL Account (greek account).
    As such, we can, somehow handle two different chart of accounts.
    In my reporting, i'm only using a single GL account for stock movements, while my greek counterparts want to handle two different accounts.
    Threfore, i have only two solution since there is normally a one to one relationship between a HQ account and a local account that are :
    1 - Duplicate the HQ accounts
    In that case, i do respect anytime the one to one relationship. I've got one HQ account for one local account. But how can i put this since i can only handle one single stock account.
    2 - I keep my single stock account like this but i won't be managing the possibility to get two different Export Codes.
    Regards
    Stephane

  • How to create two different implementation class for a Control

    Hi,
    I am a newbie to beehieve. I want to know that is it possible to create two different 'Impl' classes for a Control. If yes then how do we instantiate them ? How can we chain them (something like calling one 'Impl' from the other one? Thanks in Advance!!!
    Regards,
    Abhishek

    You are sure you are in the right forum?
    This is the JDeveloper and ADF forum...
    Timo

  • How to sync two different Nano's through the same iTunes?

    how do I upload two persons different runs through the same iTunes?
    My wife and I have two different Nanos and seperate sensors but we use the same iTunes which is in my name. Now I have made a new Nike account for my wife but how can I sync her run? At the moment it automaticaly syncs with my account?
    regards
    Morten Timm

    if you call the first redirect, the servlet is getting aborted, so you can redirect to the first servlet, working the stuff in it, and then in the second servlet you can redirect to the third servlet

Maybe you are looking for