How to enter WPA2-PSK key ?

Hi,
To connect to my network at work I have a key with 64 hexadecimal digits.
How do i enter that in the iphone ?
I read somewhere that for WEP you need to prefix '$' in front of the hex digits. Someone also told me to try to prefix 0x.
I tried the 64 hex digits without any prefix too.
None of this worked.
I also tried to create a configuration profile using the configuration tool, but it doesnt let you enter a password or key in the profile (it has to be done on the phone i guess)
Thanks

9 Alphanumeric characters will work just fine, hexadecimal is just another representation of the ASCII characters. In theory, it would take 1000 PC's about 16 years to crack a 9 alphanumeric password.

Similar Messages

How to enter a Private key into a keystore

Hi,
We have a propriteary CA, developed by us. I need to use this CA for my Signed Applet. I would enter this CA's public key(a X509 certificate) into my cacerts file.
Following is what I have done :
1) I have generated my own keystore, public and private key for signing the applet.
2) Signed the applet with the private key in the keystore.
To Do :
Now, the self generated public key(with which applet was signed) has to be signed by the properitary CA, so that when applet is downloaded my certificate is authenticated by the proprietary CA.
The problem is :
1) To get my public key certificate authenticated by the proprietary CA, I need the private key of proprietary CA.(so that I shall sign my public key file by the CA's private key) . The CA could give the private key as a byte array file. ( Or we could write a program to format the private key file, if any format exists and required). jarsigner requires keystore to sign. How could I create a keystore and enter my private key and public key into this keystore?
2) Is there any other way to do this?
Please help to resolve this problem.
Rajesh

Check this:
<A HREF="http://java.sun.com/j2se/1.4/docs/guide/pugin/developer_guide/rsa_signing.html

How to enter 08 product key

we only use 08 at work and I have 06. Work gave me the product key, but I can't figure how to enter the key so I can open the 08 download.

Hi Fran J and welcome to the Pages forum!
Could you explain in more detail? Have you downloaded the iWork08? or not?
You have to install iWork first and then open the apps to use the key.

How to setup WPA2-PSK on aironet 1602 i

I have an AIR-SAP1602I-A-K9 WAP and I am interested in configuring it for WPA2-PSK security for WAP access. I don't see a way to do this in the GUI, does this model support that type of security? Thank you.

Yes it does support WPA2/AES. Please review this guide as it should help:
http://www.cisco.com/c/en/us/support/docs/wireless-mobility/wireless-lan-wlan/116599-config-wpa-psk-00.html
-Scott

How to enter a WEP key

I'm trying to join an existing wireless network of Windows machines. Connecting to the ZyXEL router software shows that it is using 64 bit WEP for its password and this is of the form 64 6F xx xx etc. However, entering this in the Airport configuration for the Mac does not allow me to connect. I've tried putting $ or & in front of the password to no effect. How do I enter this on the Mac?
The Mac offers me 40 bit or 128 bit but not 64 bit. Is this relevant?
Alternatively, if can I just change the router password to alphanumeric e.g. macfan?

I've turned on 64 bit WEP on the router and entered a five letter password. I'm allowing broadcast of SSID while trying to fix this and the Mac can see the network but asking to join and selecting either just WEP Password or WEP 40 bit ASCII and entering the same five letter password, it fails to join and gives the error message invalid password.
Bummer!
an exact 5 ASCII character password should have worked for a WEP 40/64 bit key. But if it didn't, then it didn't.
The router should be able to tell you the WEP Hex Equivalent Password. It should looks something like 1A2B3C4D5E (this is just a made up example, you must get the real hex value from your router). You enter this as the password.
NOTE: Apple has played games with entering hex passwords over the years, and I DO NOT know the current rules, so I'm going to suggest you try 3 different ways to enter this hex value. One of them should work, or there is something else wrong.
$1A2B3C4D5E
0x1A2B3C4D5E
1A2B3C4D5E
One of these mentions of entering the WEP Hex Equivalent Password should work (I'm placing my bets on the leading dollar sign).

Where do I enter my License key in Lightroom. I downloaded the Creative Cloud version but purchased Lightroom 5 and licenses it.

Hi,
I downloaded a trial of Lightroom from CC and loved it.
I purchased version 5 and got my license key.
Now the software from CC has expired and I can't seem to figure out how to enter my license key.
Thanks,
Pete

You can't license the creative cloud version with your serial number. The only way to license that version is with your Adobe ID and password. It will be necessary for you to uninstall that version and then download from here:
Product updates
After you install you will be able to enter your serial number. The work you have done using the creative cloud trial version will not be lost because the uninstall does not remove the catalog, nor does it do anything to the images that you have imported.

My new smart TV recognizes my network, & asks, "Please enter you WEP keys (10 or 26 hex digits)" but my netwotk uses a password of 6 characters. How can I get my smart TV to connect to my network?

I have a current iMac with the latest OS update.
My new smart TV recognizes my network, & asks, “Please enter your WEP keys (10 or 26 hex digits). My Airport Express, an early model, only requires a password of less than 10 characters.
When I open “airport utility,”on my iMac it tells me this version doesn’t support my base station & says go to “Airport Service & Support.” That’s what got me here.
My earlier MacBook runs OS 10.6.8. Its version of Airport Utility works. Its Airport ID has 17 characters, & uses the same password to access the internet, but it also has a “wireless password” of 26 characters, but only shows me the dots. i haven’t the foggiest notion what the characters are, if I put them in there years ago when i did the original configuration, or if they got there otherwise..
I’m afraid of changing those settings for fear that I’l mess up the whole thing.
How can I get my smart TV to connect to my network, ?

Please check out the following AirPort User Tip on how to recover AirPort passwords.

I just replaced my desktop but now i cant edit etc. I signed in but no good. Do I need to enter my License key again and how ?

i just replaced my desktop but now i cant edit etc. I signed in but no good. Do I need to enter my License key again and how ?

What product are you trying to use to edit etc.: Acrobat ? Have you installed it? Have you activated it?

How to enter QuickTime Pro registration key in Windows 7?

I purchased a registration key for QuickTime Pro, but I'm not sure where to enter it on my Windows 7 machine. I have found these directions:
http://www.apple.com/quicktime/pro/unlock-win7.html
But that's for another version of Windows (XP? Vista?). Windows 7 Control Panel doesn't look like that, and I'm not sure where I can access the QuickTime 7 Control Panel to enter the registration key. Any advice?

You're welcome.
Wish Apple would update their website to include these instructions for Windows 7 users...
It is possible to report issues like that directly to Apple. (The challenge with that, though, is first finding the feedback forms ...)
In this instance, probably the best ones to use might be the Support feedback form:
http://www.apple.com/support/feedback/
... or the overall Apple.com feedback form:
http://www.apple.com/contact/feedback.html

WLAN User Idle Timeout and WPA2-PSK authentication

Hi,
There is a WLAN for Guest users with Session Timeout of 65535 sec and User Idle Timeout of 28800 sec. The WLAN uses PSK as Layer-2 authentication and Web Auth as Layer-3 authentication. Authentication source is locally created users on the controllers (LocalEAP) - can be RADIUS through ISE as well.
(Cisco Controller) show>sysinfo
Manufacturer's Name.............................. Cisco Systems Inc.
Product Name..................................... Cisco Controller
Product Version.................................. 7.6.130.0
RTOS Version..................................... 7.6.130.0
Bootloader Version............................... 7.6.130.0
Emergency Image Version.......................... 7.6.130.0
Build Type....................................... DATA + WPS
System Name...................................... vwlc-1
System Location.................................. Matrix
System Contact................................... IT HelpDesk Matrix
System ObjectID.................................. 1.3.6.1.4.1.9.1.1631
IP Address....................................... 10.10.10.50
System Up Time................................... 6 days 17 hrs 30 mins 26 secs
System Timezone Location......................... (GMT+10:00) Sydney, Melbourne, Canberra
System Stats Realtime Interval................... 5
System Stats Normal Interval..................... 180
Configured Country............................... AU - Australia
--More-- or (q)uit
State of 802.11b Network......................... Enabled
State of 802.11a Network......................... Enabled
Number of WLANs.................................. 2
Number of Active Clients......................... 0
Burned-in MAC Address............................ 00:0C:29:74:15:2F
Maximum number of APs supported.................. 200
(Cisco Controller) show> wlan 2
WLAN Identifier.................................. 2
Profile Name..................................... Matrix-LocalEAP
Network Name (SSID).............................. Matrix-LocalEAP
Status........................................... Enabled
MAC Filtering.................................... Disabled
Broadcast SSID................................... Enabled
AAA Policy Override.............................. Disabled
Network Admission Control
Client Profiling Status
Radius Profiling ............................ Disabled
DHCP ....................................... Disabled
HTTP ....................................... Disabled
Local Profiling ............................. Disabled
DHCP ....................................... Disabled
HTTP ....................................... Disabled
Radius-NAC State............................... Disabled
SNMP-NAC State................................. Disabled
Quarantine VLAN................................ 0
Maximum number of Associated Clients............. 0
Maximum number of Clients per AP Radio........... 200
Number of Active Clients......................... 0
Exclusionlist Timeout............................ 60 seconds
Session Timeout.................................. 65535 seconds
User Idle Timeout................................ 28800 seconds
Sleep Client..................................... disable
Sleep Client Timeout............................. 12 hours
User Idle Threshold.............................. 0 Bytes
NAS-identifier................................... vwlc-1
CHD per WLAN..................................... Enabled
Webauth DHCP exclusion........................... Disabled
Interface........................................ management
Multicast Interface.............................. Not Configured
WLAN IPv4 ACL.................................... unconfigured
WLAN IPv6 ACL.................................... unconfigured
WLAN Layer2 ACL.................................. unconfigured
mDNS Status...................................... Disabled
mDNS Profile Name................................ unconfigured
DHCP Server...................................... Default
DHCP Address Assignment Required................. Enabled
Static IP client tunneling....................... Disabled
Quality of Service............................... Silver
Per-SSID Rate Limits............................. Upstream Downstream
Average Data Rate................................ 0 0
Average Realtime Data Rate....................... 0 0
Burst Data Rate.................................. 0 0
Burst Realtime Data Rate......................... 0 0
Per-Client Rate Limits........................... Upstream Downstream
Average Data Rate................................ 0 0
Average Realtime Data Rate....................... 0 0
Burst Data Rate.................................. 0 0
Burst Realtime Data Rate......................... 0 0
Scan Defer Priority.............................. 4,5,6
Scan Defer Time.................................. 100 milliseconds
WMM.............................................. Allowed
WMM UAPSD Compliant Client Support............... Disabled
Media Stream Multicast-direct.................... Disabled
CCX - AironetIe Support.......................... Enabled
CCX - Gratuitous ProbeResponse (GPR)............. Disabled
CCX - Diagnostics Channel Capability............. Disabled
Dot11-Phone Mode (7920).......................... Disabled
Wired Protocol................................... 802.1P (Tag=2)
Passive Client Feature........................... Disabled
Peer-to-Peer Blocking Action..................... Disabled
Radio Policy..................................... All
DTIM period for 802.11a radio.................... 1
DTIM period for 802.11b radio.................... 1
Radius Servers
Authentication................................ 10.10.10.70 1812
Accounting.................................... 10.10.10.70 1813
Interim Update............................. Disabled
Framed IPv6 Acct AVP ...................... Prefix
Dynamic Interface............................. Disabled
Dynamic Interface Priority.................... wlan
Local EAP Authentication......................... Enabled (Profile 'local-eap-matrix')
Security
802.11 Authentication:........................ Open System
FT Support.................................... Disabled
Static WEP Keys............................... Disabled
802.1X........................................ Disabled
Wi-Fi Protected Access (WPA/WPA2)............. Enabled
WPA (SSN IE)............................... Disabled
WPA2 (RSN IE).............................. Enabled
TKIP Cipher............................. Disabled
AES Cipher.............................. Enabled
Auth Key Management
802.1x.................................. Disabled
PSK..................................... Enabled
CCKM.................................... Disabled
FT-1X(802.11r).......................... Disabled
FT-PSK(802.11r)......................... Disabled
PMF-1X(802.11w)......................... Disabled
PMF-PSK(802.11w)........................ Disabled
FT Reassociation Timeout................... 20
FT Over-The-DS mode........................ Disabled
GTK Randomization.......................... Disabled
SKC Cache Support.......................... Disabled
CCKM TSF Tolerance......................... 1000
WAPI.......................................... Disabled
Wi-Fi Direct policy configured................ Disabled
EAP-Passthrough............................... Disabled
CKIP ......................................... Disabled
Web Based Authentication...................... Enabled
IPv4 ACL........................................ Unconfigured
IPv6 ACL........................................ Unconfigured
Web-Auth Flex ACL............................... Unconfigured
Web Authentication server precedence:
1............................................... local
2............................................... radius
3............................................... ldap
Web-Passthrough............................... Disabled
Conditional Web Redirect...................... Disabled
Splash-Page Web Redirect...................... Disabled
Auto Anchor................................... Disabled
FlexConnect Local Switching................... Enabled
flexconnect Central Dhcp Flag................. Disabled
flexconnect nat-pat Flag...................... Disabled
flexconnect Dns Override Flag................. Disabled
flexconnect PPPoE pass-through................ Disabled
flexconnect local-switching IP-source-guar.... Disabled
FlexConnect Vlan based Central Switching ..... Disabled
FlexConnect Local Authentication.............. Disabled
FlexConnect Learn IP Address.................. Enabled
Client MFP.................................... Optional
PMF........................................... Disabled
PMF Association Comeback Time................. 1
PMF SA Query RetryTimeout..................... 200
Tkip MIC Countermeasure Hold-down Timer....... 60
Eap-params.................................... Disabled
AVC Visibilty.................................... Disabled
AVC Profile Name................................. None
Flow Monitor Name................................ None
Split Tunnel (Printers).......................... Disabled
Call Snooping.................................... Disabled
Roamed Call Re-Anchor Policy..................... Disabled
SIP CAC Fail Send-486-Busy Policy................ Enabled
SIP CAC Fail Send Dis-Association Policy......... Disabled
KTS based CAC Policy............................. Disabled
Assisted Roaming Prediction Optimization......... Disabled
802.11k Neighbor List............................ Disabled
802.11k Neighbor List Dual Band.................. Disabled
Band Select...................................... Disabled
Load Balancing................................... Disabled
Multicast Buffer................................. Disabled
Mobility Anchor List
WLAN ID IP Address Status
802.11u........................................ Disabled
MSAP Services.................................. Disabled
Local Policy
Priority Policy Name
The wireless user on joining the WLAN enters the PSK and than gets redirected to WLC Web Auth portal for authentication. On successful login, the user is granted access. The issue is that despite Idle Timeout being 28800 sec (8 hours), the WLC removes the client entry before 8 hours if the device goes to sleep - mostly within the first hour. Tested this on Windows 7 notebook multiple times. When the PC is put to sleep, the WLC loses its record after some time. When PC wakes up, it has to undergo Web Auth again. Debugging the client MAC generates these logs - from initial association to final clearing.
(Cisco Controller) >*apfMsConnTask_0: Feb 04 07:48:10.562: 3c:a9:f4:0b:91:70 Association received from mobile on BSSID 00:26:cb:4c:89:d1
*apfMsConnTask_0: Feb 04 07:48:10.562: 3c:a9:f4:0b:91:70 Global 200 Clients are allowed to AP radio
*apfMsConnTask_0: Feb 04 07:48:10.562: 3c:a9:f4:0b:91:70 Max Client Trap Threshold: 0 cur: 1
*apfMsConnTask_0: Feb 04 07:48:10.562: 3c:a9:f4:0b:91:70 Rf profile 600 Clients are allowed to AP wlan
*apfMsConnTask_0: Feb 04 07:48:10.562: 3c:a9:f4:0b:91:70 override for default ap group, marking intgrp NULL
*apfMsConnTask_0: Feb 04 07:48:10.562: 3c:a9:f4:0b:91:70 Applying Interface policy on Mobile, role Local. Ms NAC State 2 Quarantine Vlan 0 Access Vlan 10
*apfMsConnTask_0: Feb 04 07:48:10.562: 3c:a9:f4:0b:91:70 Re-applying interface policy for client
*apfMsConnTask_0: Feb 04 07:48:10.562: 3c:a9:f4:0b:91:70 10.10.1.130 WEBAUTH_REQD (8) Changing IPv4 ACL 'none' (ACL ID 255) ===> 'none' (ACL ID 255) --- (caller apf_policy.c:2219)
*apfMsConnTask_0: Feb 04 07:48:10.562: 3c:a9:f4:0b:91:70 10.10.1.130 WEBAUTH_REQD (8) Changing IPv6 ACL 'none' (ACL ID 255) ===> 'none' (ACL ID 255) --- (caller apf_policy.c:2240)
*apfMsConnTask_0: Feb 04 07:48:10.562: 3c:a9:f4:0b:91:70 apfApplyWlanPolicy: Apply WLAN Policy over PMIPv6 Client Mobility Type
*apfMsConnTask_0: Feb 04 07:48:10.562: 3c:a9:f4:0b:91:70 In processSsidIE:4850 setting Central switched to FALSE
*apfMsConnTask_0: Feb 04 07:48:10.562: 3c:a9:f4:0b:91:70 Applying site-specific Local Bridging override for station 3c:a9:f4:0b:91:70 - vapId 2, site 'default-group', interface 'management'
*apfMsConnTask_0: Feb 04 07:48:10.562: 3c:a9:f4:0b:91:70 Applying Local Bridging Interface Policy for station 3c:a9:f4:0b:91:70 - vlan 10, interface id 0, interface 'management'
*apfMsConnTask_0: Feb 04 07:48:10.562: 3c:a9:f4:0b:91:70 processSsidIE statusCode is 0 and status is 0
*apfMsConnTask_0: Feb 04 07:48:10.562: 3c:a9:f4:0b:91:70 processSsidIE ssid_done_flag is 0 finish_flag is 0
*apfMsConnTask_0: Feb 04 07:48:10.562: 3c:a9:f4:0b:91:70 STA - rates (6): 152 36 176 72 96 108 0 0 0 0 0 0 0 0 0 0
*apfMsConnTask_0: Feb 04 07:48:10.562: 3c:a9:f4:0b:91:70 suppRates statusCode is 0 and gotSuppRatesElement is 1
*apfMsConnTask_0: Feb 04 07:48:10.562: 3c:a9:f4:0b:91:70 Processing RSN IE type 48, length 22 for mobile 3c:a9:f4:0b:91:70
*apfMsConnTask_0: Feb 04 07:48:10.562: 3c:a9:f4:0b:91:70 AID 1 in Assoc Req from flex AP 00:26:cb:4c:89:d0 is same as in mscb 3c:a9:f4:0b:91:70
*apfMsConnTask_0: Feb 04 07:48:10.562: 3c:a9:f4:0b:91:70 apfMs1xStateDec
*apfMsConnTask_0: Feb 04 07:48:10.562: 3c:a9:f4:0b:91:70 10.10.1.130 WEBAUTH_REQD (8) Change state to START (0) last state WEBAUTH_REQD (8)
*apfMsConnTask_0: Feb 04 07:48:10.562: 3c:a9:f4:0b:91:70 pemApfAddMobileStation2: APF_MS_PEM_WAIT_L2_AUTH_COMPLETE = 0.
*apfMsConnTask_0: Feb 04 07:48:10.562: 3c:a9:f4:0b:91:70 10.10.1.130 START (0) Initializing policy
*apfMsConnTask_0: Feb 04 07:48:10.562: 3c:a9:f4:0b:91:70 10.10.1.130 START (0) Change state to AUTHCHECK (2) last state START (0)
*apfMsConnTask_0: Feb 04 07:48:10.562: 3c:a9:f4:0b:91:70 10.10.1.130 AUTHCHECK (2) Change state to 8021X_REQD (3) last state AUTHCHECK (2)
*apfMsConnTask_0: Feb 04 07:48:10.562: 3c:a9:f4:0b:91:70 Encryption policy is set to 0x80000001
*apfMsConnTask_0: Feb 04 07:48:10.562: 3c:a9:f4:0b:91:70 Central switch is FALSE
*apfMsConnTask_0: Feb 04 07:48:10.562: 3c:a9:f4:0b:91:70 Sending Local Switch flag = 1
*apfMsConnTask_0: Feb 04 07:48:10.562: 3c:a9:f4:0b:91:70 10.10.1.130 8021X_REQD (3) DHCP Not required on AP 00:26:cb:4c:89:d0 vapId 2 apVapId 2for this client
*apfMsConnTask_0: Feb 04 07:48:10.562: 3c:a9:f4:0b:91:70 Not Using WMM Compliance code qosCap 00
*apfMsConnTask_0: Feb 04 07:48:10.562: 3c:a9:f4:0b:91:70 10.10.1.130 8021X_REQD (3) Plumbed mobile LWAPP rule on AP 00:26:cb:4c:89:d0 vapId 2 apVapId 2 flex-acl-name:
*apfMsConnTask_0: Feb 04 07:48:10.562: 3c:a9:f4:0b:91:70 apfPemAddUser2 (apf_policy.c:333) Changing state for mobile 3c:a9:f4:0b:91:70 on AP 00:26:cb:4c:89:d0 from Associated to Associated
*apfMsConnTask_0: Feb 04 07:48:10.563: 3c:a9:f4:0b:91:70 apfPemAddUser2:session timeout forstation 3c:a9:f4:0b:91:70 - Session Tout 65535, apfMsTimeOut '65535' and sessionTimerRunning flag is 0
*apfMsConnTask_0: Feb 04 07:48:10.563: 3c:a9:f4:0b:91:70 Scheduling deletion of Mobile Station: (callerId: 49) in 65535 seconds
*apfMsConnTask_0: Feb 04 07:48:10.563: 3c:a9:f4:0b:91:70 Func: apfPemAddUser2, Ms Timeout = 65535, Session Timeout = 65535
*apfMsConnTask_0: Feb 04 07:48:10.563: 3c:a9:f4:0b:91:70 Sending Assoc Response to station on BSSID 00:26:cb:4c:89:d1 (status 0) ApVapId 2 Slot 0
*apfMsConnTask_0: Feb 04 07:48:10.563: 3c:a9:f4:0b:91:70 apfProcessAssocReq (apf_80211.c:8294) Changing state for mobile 3c:a9:f4:0b:91:70 on AP 00:26:cb:4c:89:d0 from Associated to Associated
*pemReceiveTask: Feb 04 07:48:10.563: 3c:a9:f4:0b:91:70 10.10.1.130 Removed NPU entry.
*spamApTask7: Feb 04 07:48:10.566: 3c:a9:f4:0b:91:70 Sent 1x initiate message to multi thread task for mobile 3c:a9:f4:0b:91:70
*Dot1x_NW_MsgTask_0: Feb 04 07:48:10.566: 3c:a9:f4:0b:91:70 Creating a PKC PMKID Cache entry for station 3c:a9:f4:0b:91:70 (RSN 2)
*Dot1x_NW_MsgTask_0: Feb 04 07:48:10.566: 3c:a9:f4:0b:91:70 Resetting MSCB PMK Cache Entry 0 for station 3c:a9:f4:0b:91:70
*Dot1x_NW_MsgTask_0: Feb 04 07:48:10.566: 3c:a9:f4:0b:91:70 Removing BSSID 00:26:cb:4c:89:d1 from PMKID cache of station 3c:a9:f4:0b:91:70
*Dot1x_NW_MsgTask_0: Feb 04 07:48:10.566: 3c:a9:f4:0b:91:70 Setting active key cache index 0 ---> 8
*Dot1x_NW_MsgTask_0: Feb 04 07:48:10.566: 3c:a9:f4:0b:91:70 Setting active key cache index 8 ---> 0
*Dot1x_NW_MsgTask_0: Feb 04 07:48:10.566: 3c:a9:f4:0b:91:70 Adding BSSID 00:26:cb:4c:89:d1 to PMKID cache at index 0 for station 3c:a9:f4:0b:91:70
*Dot1x_NW_MsgTask_0: Feb 04 07:48:10.566: New PMKID: (16)
*Dot1x_NW_MsgTask_0: Feb 04 07:48:10.566: [0000] 67 67 8f 7d 2a 8d 78 f9 6d 29 c7 74 d2 fd 6a 25
*Dot1x_NW_MsgTask_0: Feb 04 07:48:10.566: 3c:a9:f4:0b:91:70 Initiating RSN PSK to mobile 3c:a9:f4:0b:91:70
*Dot1x_NW_MsgTask_0: Feb 04 07:48:10.566: 3c:a9:f4:0b:91:70 EAP-PARAM Debug - eap-params for Wlan-Id :2 is disabled - applying Global eap timers and retries
*Dot1x_NW_MsgTask_0: Feb 04 07:48:10.566: 3c:a9:f4:0b:91:70 dot1x - moving mobile 3c:a9:f4:0b:91:70 into Force Auth state
*Dot1x_NW_MsgTask_0: Feb 04 07:48:10.566: 3c:a9:f4:0b:91:70 Skipping EAP-Success to mobile 3c:a9:f4:0b:91:70
*Dot1x_NW_MsgTask_0: Feb 04 07:48:10.566: 3c:a9:f4:0b:91:70 EAPOL Header:
*Dot1x_NW_MsgTask_0: Feb 04 07:48:10.566: 00000000: 02 03 5f 00 .._.
*Dot1x_NW_MsgTask_0: Feb 04 07:48:10.566: 3c:a9:f4:0b:91:70 Found an cache entry for BSSID 00:26:cb:4c:89:d1 in PMKID cache at index 0 of station 3c:a9:f4:0b:91:70
*Dot1x_NW_MsgTask_0: Feb 04 07:48:10.566: 3c:a9:f4:0b:91:70 Found an cache entry for BSSID 00:26:cb:4c:89:d1 in PMKID cache at index 0 of station 3c:a9:f4:0b:91:70
*Dot1x_NW_MsgTask_0: Feb 04 07:48:10.566: Including PMKID in M1 (16)
*Dot1x_NW_MsgTask_0: Feb 04 07:48:10.566: [0000] 67 67 8f 7d 2a 8d 78 f9 6d 29 c7 74 d2 fd 6a 25
*Dot1x_NW_MsgTask_0: Feb 04 07:48:10.566: 3c:a9:f4:0b:91:70 Starting key exchange to mobile 3c:a9:f4:0b:91:70, data packets will be dropped
*Dot1x_NW_MsgTask_0: Feb 04 07:48:10.566: 3c:a9:f4:0b:91:70 Sending EAPOL-Key Message to mobile 3c:a9:f4:0b:91:70
state INITPMK (message 1), replay counter 00.00.00.00.00.00.00.00
*Dot1x_NW_MsgTask_0: Feb 04 07:48:10.566: 3c:a9:f4:0b:91:70 Sending EAPOL-Key Message to mobile 3c:a9:f4:0b:91:70
state INITPMK (message 1), replay counter 00.00.00.00.00.00.00.00
*Dot1x_NW_MsgTask_0: Feb 04 07:48:10.566: 3c:a9:f4:0b:91:70 Allocating EAP Pkt for retransmission to mobile 3c:a9:f4:0b:91:70
*Dot1x_NW_MsgTask_0: Feb 04 07:48:10.566: 3c:a9:f4:0b:91:70 mscb->apfMsLwappLradNhMac = 00:0c:29:e4:e9:6a mscb->apfMsLradSlotId = 0 mscb->apfMsLradJumbo = 0 mscb->apfMsintIfNum = 1
*Dot1x_NW_MsgTask_0: Feb 04 07:48:10.566: 3c:a9:f4:0b:91:70 mscb->apfMsBssid = 00:26:cb:4c:89:d0 mscb->apfMsAddress = 3c:a9:f4:0b:91:70 mscb->apfMsApVapId = 2
*Dot1x_NW_MsgTask_0: Feb 04 07:48:10.566: 3c:a9:f4:0b:91:70 dot1xcb->snapOrg = 00 00 00 dot1xcb->eapolWepBit = 0 mscb->apfMsLwappLradVlanId = 10 mscb->apfMsLwappMwarInet.ipv4.addr = 168430130
*Dot1x_NW_MsgTask_0: Feb 04 07:48:10.566: 3c:a9:f4:0b:91:70 mscb->apfMsLwappMwarPort = 5246 mscb->apfMsLwappLradInet.ipv4.addr = 168427904 mscb->apfMsLwappLradPort = 41879
*Dot1x_NW_MsgTask_0: Feb 04 07:48:10.567: 3c:a9:f4:0b:91:70 Received EAPOL-Key from mobile 3c:a9:f4:0b:91:70
*Dot1x_NW_MsgTask_0: Feb 04 07:48:10.568: 3c:a9:f4:0b:91:70 Ignoring invalid EAPOL version (1) in EAPOL-key message from mobile 3c:a9:f4:0b:91:70
*Dot1x_NW_MsgTask_0: Feb 04 07:48:10.568: 3c:a9:f4:0b:91:70 Received EAPOL-key in PTK_START state (message 2) from mobile 3c:a9:f4:0b:91:70
*Dot1x_NW_MsgTask_0: Feb 04 07:48:10.568: 3c:a9:f4:0b:91:70 Stopping retransmission timer for mobile 3c:a9:f4:0b:91:70
*Dot1x_NW_MsgTask_0: Feb 04 07:48:10.568: 3c:a9:f4:0b:91:70 EAPOL Header:
*Dot1x_NW_MsgTask_0: Feb 04 07:48:10.568: 00000000: 02 03 5f 00 .._.
*Dot1x_NW_MsgTask_0: Feb 04 07:48:10.568: 3c:a9:f4:0b:91:70 Sending EAPOL-Key Message to mobile 3c:a9:f4:0b:91:70
state PTKINITNEGOTIATING (message 3), replay counter 00.00.00.00.00.00.00.01
*Dot1x_NW_MsgTask_0: Feb 04 07:48:10.568: 3c:a9:f4:0b:91:70 Sending EAPOL-Key Message to mobile 3c:a9:f4:0b:91:70
state PTKINITNEGOTIATING (message 3), replay counter 00.00.00.00.00.00.00.01
*Dot1x_NW_MsgTask_0: Feb 04 07:48:10.568: 3c:a9:f4:0b:91:70 Reusing allocated memory for EAP Pkt for retransmission to mobile 3c:a9:f4:0b:91:70
*Dot1x_NW_MsgTask_0: Feb 04 07:48:10.568: 3c:a9:f4:0b:91:70 mscb->apfMsLwappLradNhMac = 00:0c:29:e4:e9:6a mscb->apfMsLradSlotId = 0 mscb->apfMsLradJumbo = 0 mscb->apfMsintIfNum = 1
*Dot1x_NW_MsgTask_0: Feb 04 07:48:10.568: 3c:a9:f4:0b:91:70 mscb->apfMsBssid = 00:26:cb:4c:89:d0 mscb->apfMsAddress = 3c:a9:f4:0b:91:70 mscb->apfMsApVapId = 2
*Dot1x_NW_MsgTask_0: Feb 04 07:48:10.568: 3c:a9:f4:0b:91:70 dot1xcb->snapOrg = 00 00 00 dot1xcb->eapolWepBit = 0 mscb->apfMsLwappLradVlanId = 10 mscb->apfMsLwappMwarInet.ipv4.addr = 168430130
*Dot1x_NW_MsgTask_0: Feb 04 07:48:10.568: 3c:a9:f4:0b:91:70 mscb->apfMsLwappMwarPort = 5246 mscb->apfMsLwappLradInet.ipv4.addr = 168427904 mscb->apfMsLwappLradPort = 41879
*Dot1x_NW_MsgTask_0: Feb 04 07:48:10.569: 3c:a9:f4:0b:91:70 Received EAPOL-Key from mobile 3c:a9:f4:0b:91:70
*Dot1x_NW_MsgTask_0: Feb 04 07:48:10.569: 3c:a9:f4:0b:91:70 Ignoring invalid EAPOL version (1) in EAPOL-key message from mobile 3c:a9:f4:0b:91:70
*Dot1x_NW_MsgTask_0: Feb 04 07:48:10.569: 3c:a9:f4:0b:91:70 Received EAPOL-key in PTKINITNEGOTIATING state (message 4) from mobile 3c:a9:f4:0b:91:70
*Dot1x_NW_MsgTask_0: Feb 04 07:48:10.569: 3c:a9:f4:0b:91:70 Stopping retransmission timer for mobile 3c:a9:f4:0b:91:70
*Dot1x_NW_MsgTask_0: Feb 04 07:48:10.569: 3c:a9:f4:0b:91:70 Freeing EAP Retransmit Bufer for mobile 3c:a9:f4:0b:91:70
*Dot1x_NW_MsgTask_0: Feb 04 07:48:10.569: 3c:a9:f4:0b:91:70 apfMs1xStateInc
*Dot1x_NW_MsgTask_0: Feb 04 07:48:10.569: 3c:a9:f4:0b:91:70 10.10.1.130 8021X_REQD (3) Change state to L2AUTHCOMPLETE (4) last state 8021X_REQD (3)
*Dot1x_NW_MsgTask_0: Feb 04 07:48:10.569: 3c:a9:f4:0b:91:70 Central switch is FALSE
*Dot1x_NW_MsgTask_0: Feb 04 07:48:10.569: 3c:a9:f4:0b:91:70 Sending the Central Auth Info
*Dot1x_NW_MsgTask_0: Feb 04 07:48:10.569: 3c:a9:f4:0b:91:70 Central Auth Info Allocated PMKLen = 32
*Dot1x_NW_MsgTask_0: Feb 04 07:48:10.569: EapolReplayCounter: 00 00 00 00 00 00 00 01
*Dot1x_NW_MsgTask_0: Feb 04 07:48:10.569: EapolReplayCounter: 00 00 00 00 00 00 00 01
*Dot1x_NW_MsgTask_0: Feb 04 07:48:10.569: 3c:a9:f4:0b:91:70 PMK: pmkActiveIndex = 0
*Dot1x_NW_MsgTask_0: Feb 04 07:48:10.569: 3c:a9:f4:0b:91:70 EapolReplayCounter: 00 00 00 00 00 00 00 01
*Dot1x_NW_MsgTask_0: Feb 04 07:48:10.569: 3c:a9:f4:0b:91:70 msAssocTypeFlagsMsb = 0 msAssocTypeFlagsLsb = 2
apfMsEntryType = 0 apfMsEapType = 0
*Dot1x_NW_MsgTask_0: Feb 04 07:48:10.569: 3c:a9:f4:0b:91:70 Sending Local Switch flag = 1
*Dot1x_NW_MsgTask_0: Feb 04 07:48:10.569: 3c:a9:f4:0b:91:70 10.10.1.130 L2AUTHCOMPLETE (4) DHCP Not required on AP 00:26:cb:4c:89:d0 vapId 2 apVapId 2for this client
*Dot1x_NW_MsgTask_0: Feb 04 07:48:10.569: 3c:a9:f4:0b:91:70 Not Using WMM Compliance code qosCap 00
*Dot1x_NW_MsgTask_0: Feb 04 07:48:10.569: 3c:a9:f4:0b:91:70 10.10.1.130 L2AUTHCOMPLETE (4) Plumbed mobile LWAPP rule on AP 00:26:cb:4c:89:d0 vapId 2 apVapId 2 flex-acl-name:
*Dot1x_NW_MsgTask_0: Feb 04 07:48:10.569: 3c:a9:f4:0b:91:70 10.10.1.130 L2AUTHCOMPLETE (4) Change state to WEBAUTH_REQD (8) last state L2AUTHCOMPLETE (4)
*Dot1x_NW_MsgTask_0: Feb 04 07:48:10.569: 3c:a9:f4:0b:91:70 10.10.1.130 WEBAUTH_REQD (8) pemAdvanceState2 6236, Adding TMP rule
*Dot1x_NW_MsgTask_0: Feb 04 07:48:10.569: 3c:a9:f4:0b:91:70 10.10.1.130 WEBAUTH_REQD (8) Adding Fast Path rule
type = Airespace AP Client - ACL passthru
on AP 00:26:cb:4c:89:d0, slot 0, interface = 1, QOS = 0
IPv4 ACL ID
*Dot1x_NW_MsgTask_0: Feb 04 07:48:10.569: 3c:a9:f4:0b:91:70 10.10.1.130 WEBAUTH_REQD (8) Fast Path rule (contd...) 802.1P = 2, DSCP = 0, TokenID = 64206 Local Bridging Vlan = 10, Local Bridging intf id = 0
*Dot1x_NW_MsgTask_0: Feb 04 07:48:10.569: 3c:a9:f4:0b:91:70 10.10.1.130 WEBAUTH_REQD (8) Successfully plumbed mobile rule (IPv4 ACL ID 255, IPv6 ACL ID 255, L2 ACL ID 255)
*spamApTask7: Feb 04 07:48:10.569: 3c:a9:f4:0b:91:70 spamEncodeCentralAuthInoMsPayload: msAssocTypeFlagsMsb = 0 msAssocTypeFlagsLsb = 2
apfMsEntryType = 0 pmkLen = 32
*pemReceiveTask: Feb 04 07:48:10.570: 3c:a9:f4:0b:91:70 10.10.1.130 Added NPU entry of type 2, dtlFlags 0x0
*pemReceiveTask: Feb 04 07:48:10.570: 3c:a9:f4:0b:91:70 Pushing IPv6: fe80:0000:0000:0000:c915:4a8e:6d1a:e20d , and MAC: 3C:A9:F4:0B:91:70 , Binding to Data Plane. SUCCESS !!
*DHCP Socket Task: Feb 04 07:48:10.589: 3c:a9:f4:0b:91:70 DHCP received op BOOTREPLY (2) (len 308,vlan 10, port 1, encap 0xec03)
*DHCP Socket Task: Feb 04 07:48:10.589: 3c:a9:f4:0b:91:70 DHCP processing DHCP ACK (5)
*DHCP Socket Task: Feb 04 07:48:10.589: 3c:a9:f4:0b:91:70 DHCP op: BOOTREPLY, htype: Ethernet, hlen: 6, hops: 0
*DHCP Socket Task: Feb 04 07:48:10.589: 3c:a9:f4:0b:91:70 DHCP xid: 0xcce207f6 (3437365238), secs: 0, flags: 0
*DHCP Socket Task: Feb 04 07:48:10.589: 3c:a9:f4:0b:91:70 DHCP chaddr: 3c:a9:f4:0b:91:70
*DHCP Socket Task: Feb 04 07:48:10.589: 3c:a9:f4:0b:91:70 DHCP ciaddr: 0.0.0.0, yiaddr: 10.10.1.130
*DHCP Socket Task: Feb 04 07:48:10.589: 3c:a9:f4:0b:91:70 DHCP siaddr: 0.0.0.0, giaddr: 0.0.0.0
*DHCP Socket Task: Feb 04 07:48:10.589: 3c:a9:f4:0b:91:70 DHCP server id: 10.10.1.20 rcvd server id: 10.10.1.20
*SNMPTask: Feb 04 07:48:16.594: 3c:a9:f4:0b:91:70 Central Switch = FALSE
*SNMPTask: Feb 04 07:48:16.594: 3c:a9:f4:0b:91:70 Central Switch = FALSE
*SNMPTask: Feb 04 07:48:16.595: 3c:a9:f4:0b:91:70 Central Switch = FALSE
*SNMPTask: Feb 04 07:48:16.595: 3c:a9:f4:0b:91:70 Central Switch = FALSE
*ewmwebWebauth1: Feb 04 07:48:31.129: 3c:a9:f4:0b:91:70 Username entry (local1) created for mobile, length = 6
*ewmwebWebauth1: Feb 04 07:48:31.130: 3c:a9:f4:0b:91:70 Username entry (local1) created in mscb for mobile, length = 6
*ewmwebWebauth1: Feb 04 07:48:31.130: 3c:a9:f4:0b:91:70 10.10.1.130 WEBAUTH_REQD (8) Change state to WEBAUTH_NOL3SEC (14) last state WEBAUTH_REQD (8)
*ewmwebWebauth1: Feb 04 07:48:31.130: 3c:a9:f4:0b:91:70 apfMsRunStateInc
*ewmwebWebauth1: Feb 04 07:48:31.130: 3c:a9:f4:0b:91:70 10.10.1.130 WEBAUTH_NOL3SEC (14) Change state to RUN (20) last state WEBAUTH_NOL3SEC (14)
*ewmwebWebauth1: Feb 04 07:48:31.130: 3c:a9:f4:0b:91:70 Session Timeout is 65535 - starting session timer for the mobile
*ewmwebWebauth1: Feb 04 07:48:31.130: 3c:a9:f4:0b:91:70 10.10.1.130 RUN (20) Reached PLUMBFASTPATH: from line 6571
*ewmwebWebauth1: Feb 04 07:48:31.131: 3c:a9:f4:0b:91:70 10.10.1.130 RUN (20) Replacing Fast Path rule
type = Airespace AP Client
on AP 00:26:cb:4c:89:d0, slot 0, interface = 1, QOS = 0
IPv4 ACL ID = 255, IPv6 ACL ID =
*ewmwebWebauth1: Feb 04 07:48:31.131: 3c:a9:f4:0b:91:70 10.10.1.130 RUN (20) Fast Path rule (contd...) 802.1P = 2, DSCP = 0, TokenID = 64206 Local Bridging Vlan = 10, Local Bridging intf id = 0
*ewmwebWebauth1: Feb 04 07:48:31.131: 3c:a9:f4:0b:91:70 10.10.1.130 RUN (20) Successfully plumbed mobile rule (IPv4 ACL ID 255, IPv6 ACL ID 255, L2 ACL ID 255)
*pemReceiveTask: Feb 04 07:48:31.132: 3c:a9:f4:0b:91:70 10.10.1.130 Added NPU entry of type 1, dtlFlags 0x0
(Cisco Controller) >
(Cisco Controller) >
(Cisco Controller) >
(Cisco Controller) >
(Cisco Controller) >
(Cisco Controller) >
(Cisco Controller) >
(Cisco Controller) >
(Cisco Controller) >*pemReceiveTask: Feb 04 07:48:31.132: 3c:a9:f4:0b:91:70 Pushing IPv6: fe80:0000:0000:0000:c915:4a8e:6d1a:e20d , and MAC: 3C:A9:F4:0B:91:70 , Binding to Data Plane. SUCCESS !!
*emWeb: Feb 04 07:49:14.120: 3c:a9:f4:0b:91:70 Central Switch = FALSE
*emWeb: Feb 04 07:49:14.120: 3c:a9:f4:0b:91:70 Central Switch = FALSE
*emWeb: Feb 04 07:49:14.120: 3c:a9:f4:0b:91:70 Central Switch = FALSE
*SNMPTask: Feb 04 07:51:19.646: 3c:a9:f4:0b:91:70 Central Switch = FALSE
*SNMPTask: Feb 04 07:51:19.646: 3c:a9:f4:0b:91:70 Central Switch = FALSE
*SNMPTask: Feb 04 07:51:19.662: 3c:a9:f4:0b:91:70 Central Switch = FALSE
*SNMPTask: Feb 04 07:51:19.662: 3c:a9:f4:0b:91:70 Central Switch = FALSE
*SNMPTask: Feb 04 07:51:19.663: 3c:a9:f4:0b:91:70 Central Switch = FALSE
*SNMPTask: Feb 04 07:51:19.663: 3c:a9:f4:0b:91:70 Central Switch = FALSE
*IPv6_Msg_Task: Feb 04 07:53:35.661: 3c:a9:f4:0b:91:70 Link Local address fe80::c915:4a8e:6d1a:e20d updated to mscb. Not Advancing pem state.Current state: mscb in apfMsMmInitial mobility state and client state APF_MS_STATE_A
*dot1xMsgTask: Feb 04 07:54:26.664: GTK Rotation Kicked in for AP: 00:26:cb:4c:89:d0 SlotId = 1 - (0x47440ef0)
*dot1xMsgTask: Feb 04 07:54:26.665: Generated a new group key for AP 00:26:cb:4c:89:d0(1) - vap 1
*dot1xMsgTask: Feb 04 07:54:26.665: Sending of M5 for 00:26:cb:4c:89:d0 is Skipped, rc = 1
*dot1xMsgTask: Feb 04 07:54:26.665: Generated a new group key for AP 00:26:cb:4c:89:d0(1) - vap 2
*dot1xMsgTask: Feb 04 07:54:26.665: Sending of M5 for 00:26:cb:4c:89:d0 is Skipped, rc = 1
*SNMPTask: Feb 04 07:56:19.689: 3c:a9:f4:0b:91:70 Central Switch = FALSE
*SNMPTask: Feb 04 07:56:19.689: 3c:a9:f4:0b:91:70 Central Switch = FALSE
*SNMPTask: Feb 04 08:01:19.730: 3c:a9:f4:0b:91:70 Central Switch = FALSE
*SNMPTask: Feb 04 08:01:19.730: 3c:a9:f4:0b:91:70 Central Switch = FALSE
*dot1xMsgTask: Feb 04 08:01:23.904: GTK Rotation Kicked in for AP: 00:26:cb:4c:89:d0 SlotId = 0 - (0x47440ef0)
*dot1xMsgTask: Feb 04 08:01:23.904: Generated a new group key for AP 00:26:cb:4c:89:d0(0) - vap 1
*dot1xMsgTask: Feb 04 08:01:23.905: Sending of M5 for 00:26:cb:4c:89:d0 is Skipped, rc = 1
*dot1xMsgTask: Feb 04 08:01:23.905: Generated a new group key for AP 00:26:cb:4c:89:d0(0) - vap 2
*dot1xMsgTask: Feb 04 08:01:23.905: GTK rotation for 3c:a9:f4:0b:91:70
*dot1xMsgTask: Feb 04 08:01:23.905: 3c:a9:f4:0b:91:70 EAPOL Header:
*dot1xMsgTask: Feb 04 08:01:23.905: 00000000: 02 03 5f 00 .._.
*dot1xMsgTask: Feb 04 08:01:23.905: 3c:a9:f4:0b:91:70 Key exchange done, data packets from mobile 3c:a9:f4:0b:91:70 should be forwarded shortly
*dot1xMsgTask: Feb 04 08:01:23.905: 3c:a9:f4:0b:91:70 Key exchange done, data packets from mobile 3c:a9:f4:0b:91:70 should be forwarded shortly
*dot1xMsgTask: Feb 04 08:01:23.906: Confirmation Key: (16)
*dot1xMsgTask: Feb 04 08:01:23.906: [0000] fa a3 68 28 46 1f 49 18 a0 60 7a 92 c4 f5 64 3d
*dot1xMsgTask: Feb 04 08:01:23.906: 3c:a9:f4:0b:91:70 Sending EAPOL-Key Message to mobile 3c:a9:f4:0b:91:70
state PTKINITDONE (message 5 - group), replay counter 00.00.00.00.00.00.00.02
*dot1xMsgTask: Feb 04 08:01:23.906: 3c:a9:f4:0b:91:70 Sending EAPOL-Key Message to mobile 3c:a9:f4:0b:91:70
state PTKINITDONE (message 5 - group), replay counter 00.00.00.00.00.00.00.02
*dot1xMsgTask: Feb 04 08:01:23.906: 3c:a9:f4:0b:91:70 Allocating EAP Pkt for retransmission to mobile 3c:a9:f4:0b:91:70
*dot1xMsgTask: Feb 04 08:01:23.906: 3c:a9:f4:0b:91:70 mscb->apfMsLwappLradNhMac = 00:0c:29:e4:e9:6a mscb->apfMsLradSlotId = 0 mscb->apfMsLradJumbo = 0 mscb->apfMsintIfNum = 1
*dot1xMsgTask: Feb 04 08:01:23.906: 3c:a9:f4:0b:91:70 mscb->apfMsBssid = 00:26:cb:4c:89:d0 mscb->apfMsAddress = 3c:a9:f4:0b:91:70 mscb->apfMsApVapId = 2
*dot1xMsgTask: Feb 04 08:01:23.907: 3c:a9:f4:0b:91:70 dot1xcb->snapOrg = 00 00 00 dot1xcb->eapolWepBit = 1 mscb->apfMsLwappLradVlanId = 10 mscb->apfMsLwappMwarInet.ipv4.addr = 168430130
*dot1xMsgTask: Feb 04 08:01:23.907: 3c:a9:f4:0b:91:70 mscb->apfMsLwappMwarPort = 5246 mscb->apfMsLwappLradInet.ipv4.addr = 168427904 mscb->apfMsLwappLradPort = 41879
*dot1xMsgTask: Feb 04 08:01:23.907: 3c:a9:f4:0b:91:70 Updated broadcast key sent to mobile 3C:A9:F4:0B:91:70
*dot1xMsgTask: Feb 04 08:01:23.907: 3c:a9:f4:0b:91:70 Updated broadcast key sent to mobile 3C:A9:F4:0B:91:70
*dot1xMsgTask: Feb 04 08:01:23.907: Sending of M5 for 00:26:cb:4c:89:d0 is Skipped, rc = 1
*osapiBsnTimer: Feb 04 08:01:25.104: 3c:a9:f4:0b:91:70 802.1x 'timeoutEvt' Timer expired for station 3c:a9:f4:0b:91:70 and for message = M5
*dot1xMsgTask: Feb 04 08:01:25.104: 3c:a9:f4:0b:91:70 Retransmit 1 of EAPOL-Key M5 (length 131) for mobile 3c:a9:f4:0b:91:70
*dot1xMsgTask: Feb 04 08:01:25.104: 3c:a9:f4:0b:91:70 mscb->apfMsLwappLradNhMac = 00:0c:29:e4:e9:6a mscb->apfMsLradSlotId = 0 mscb->apfMsLradJumbo = 0 mscb->apfMsintIfNum = 1
*dot1xMsgTask: Feb 04 08:01:25.104: 3c:a9:f4:0b:91:70 mscb->apfMsBssid = 00:26:cb:4c:89:d0 mscb->apfMsAddress = 3c:a9:f4:0b:91:70 mscb->apfMsApVapId = 2
*dot1xMsgTask: Feb 04 08:01:25.104: 3c:a9:f4:0b:91:70 dot1xcb->snapOrg = 00 00 00 dot1xcb->eapolWepBit = 1 mscb->apfMsLwappLradVlanId = 10 mscb->apfMsLwappMwarInet.ipv4.addr = 168430130
*dot1xMsgTask: Feb 04 08:01:25.104: 3c:a9:f4:0b:91:70 mscb->apfMsLwappMwarPort = 5246 mscb->apfMsLwappLradInet.ipv4.addr = 168427904 mscb->apfMsLwappLradPort = 41879
*osapiBsnTimer: Feb 04 08:01:26.104: 3c:a9:f4:0b:91:70 802.1x 'timeoutEvt' Timer expired for station 3c:a9:f4:0b:91:70 and for message = M5
*dot1xMsgTask: Feb 04 08:01:26.104: 3c:a9:f4:0b:91:70 Retransmit 2 of EAPOL-Key M5 (length 131) for mobile 3c:a9:f4:0b:91:70
*dot1xMsgTask: Feb 04 08:01:26.104: 3c:a9:f4:0b:91:70 mscb->apfMsLwappLradNhMac = 00:0c:29:e4:e9:6a mscb->apfMsLradSlotId = 0 mscb->apfMsLradJumbo = 0 mscb->apfMsintIfNum = 1
*dot1xMsgTask: Feb 04 08:01:26.104: 3c:a9:f4:0b:91:70 mscb->apfMsBssid = 00:26:cb:4c:89:d0 mscb->apfMsAddress = 3c:a9:f4:0b:91:70 mscb->apfMsApVapId = 2
*dot1xMsgTask: Feb 04 08:01:26.104: 3c:a9:f4:0b:91:70 dot1xcb->snapOrg = 00 00 00 dot1xcb->eapolWepBit = 1 mscb->apfMsLwappLradVlanId = 10 mscb->apfMsLwappMwarInet.ipv4.addr = 168430130
*dot1xMsgTask: Feb 04 08:01:26.104: 3c:a9:f4:0b:91:70 mscb->apfMsLwappMwarPort = 5246 mscb->apfMsLwappLradInet.ipv4.addr = 168427904 mscb->apfMsLwappLradPort = 41879
*osapiBsnTimer: Feb 04 08:01:27.104: 3c:a9:f4:0b:91:70 802.1x 'timeoutEvt' Timer expired for station 3c:a9:f4:0b:91:70 and for message = M5
*dot1xMsgTask: Feb 04 08:01:27.104: 3c:a9:f4:0b:91:70 Retransmit failure for EAPOL-Key M5 to mobile 3c:a9:f4:0b:91:70, retransmit count 3, mscb deauth count 0
*dot1xMsgTask: Feb 04 08:01:27.104: 3c:a9:f4:0b:91:70 Resetting MSCB PMK Cache Entry 0 for station 3c:a9:f4:0b:91:70
*dot1xMsgTask: Feb 04 08:01:27.105: 3c:a9:f4:0b:91:70 Removing BSSID 00:26:cb:4c:89:d1 from PMKID cache of station 3c:a9:f4:0b:91:70
*dot1xMsgTask: Feb 04 08:01:27.105: 3c:a9:f4:0b:91:70 Setting active key cache index 0 ---> 8
*dot1xMsgTask: Feb 04 08:01:27.105: 3c:a9:f4:0b:91:70 Sent Deauthenticate to mobile on BSSID 00:26:cb:4c:89:d0 slot 0(caller 1x_ptsm.c:598)
*dot1xMsgTask: Feb 04 08:01:27.105: 3c:a9:f4:0b:91:70 Setting active key cache index 8 ---> 8
*dot1xMsgTask: Feb 04 08:01:27.105: 3c:a9:f4:0b:91:70 Deleting the PMK cache when de-authenticating the client.
*dot1xMsgTask: Feb 04 08:01:27.105: 3c:a9:f4:0b:91:70 Global PMK Cache deletion failed.
*dot1xMsgTask: Feb 04 08:01:27.106: 3c:a9:f4:0b:91:70 Scheduling deletion of Mobile Station: (callerId: 57) in 10 seconds
*dot1xMsgTask: Feb 04 08:01:27.106: 3c:a9:f4:0b:91:70 Freeing EAP Retransmit Bufer for mobile 3c:a9:f4:0b:91:70
*osapiBsnTimer: Feb 04 08:01:37.105: 3c:a9:f4:0b:91:70 apfMsExpireCallback (apf_ms.c:626) Expiring Mobile!
*apfReceiveTask: Feb 04 08:01:37.105: 3c:a9:f4:0b:91:70 apfMsExpireMobileStation (apf_ms.c:6655) Changing state for mobile 3c:a9:f4:0b:91:70 on AP 00:26:cb:4c:89:d0 from Associated to Disassociated
*apfReceiveTask: Feb 04 08:01:37.105: 3c:a9:f4:0b:91:70 Scheduling deletion of Mobile Station: (callerId: 45) in 10 seconds
*osapiBsnTimer: Feb 04 08:01:47.105: 3c:a9:f4:0b:91:70 apfMsExpireCallback (apf_ms.c:626) Expiring Mobile!
*apfReceiveTask: Feb 04 08:01:47.106: 3c:a9:f4:0b:91:70 Sent Deauthenticate to mobile on BSSID 00:26:cb:4c:89:d0 slot 0(caller apf_ms.c:6749)
*apfReceiveTask: Feb 04 08:01:47.106: 3c:a9:f4:0b:91:70 Setting active key cache index 8 ---> 8
*apfReceiveTask: Feb 04 08:01:47.106: 3c:a9:f4:0b:91:70 Deleting the PMK cache when de-authenticating the client.
*apfReceiveTask: Feb 04 08:01:47.106: 3c:a9:f4:0b:91:70 Global PMK Cache deletion failed.
*apfReceiveTask: Feb 04 08:01:47.106: 3c:a9:f4:0b:91:70 apfMsAssoStateDec
*apfReceiveTask: Feb 04 08:01:47.106: 3c:a9:f4:0b:91:70 apfMsExpireMobileStation (apf_ms.c:6787) Changing state for mobile 3c:a9:f4:0b:91:70 on AP 00:26:cb:4c:89:d0 from Disassociated to Idle
*apfReceiveTask: Feb 04 08:01:47.106: 3c:a9:f4:0b:91:70 Scheduling deletion of Mobile Station: (callerId: 47) in 10 seconds
*osapiBsnTimer: Feb 04 08:01:57.106: 3c:a9:f4:0b:91:70 apfMsExpireCallback (apf_ms.c:626) Expiring Mobile!
*apfReceiveTask: Feb 04 08:01:57.106: 3c:a9:f4:0b:91:70 pemApfDeleteMobileStation2: APF_MS_PEM_WAIT_L2_AUTH_COMPLETE = 0.
*apfReceiveTask: Feb 04 08:01:57.106: 3c:a9:f4:0b:91:70 10.10.1.130 START (0) Deleted mobile LWAPP rule on AP [00:26:cb:4c:89:d0]
*apfReceiveTask: Feb 04 08:01:57.106: 3c:a9:f4:0b:91:70 Username entry deleted for mobile
*apfReceiveTask: Feb 04 08:01:57.106: 3c:a9:f4:0b:91:70 Deleting mobile on AP 00:26:cb:4c:89:d0(0)
If Layer-2 Auth (PSK) is set to "none" and only Layer-3 Web Auth is kept, then there are no issues. PC can wake up before 8 hours and not prompted for Web Auth again. As a test, I setup the WLAN with Layer-2 PSK auth only with Layer-3 auth set to none. The WLC removed the client entry after 25 minutes. Not an issue for PSK based auth only as PC on wake up seamlessly gets associated to WLAN.
Is User Idle Timeout setting not valid when WPA2-PSK is used as the auth method ?
Thanks,
Rick.

Thanks Scott, The code version is 7.6.130.0 which supports Sleeping Client feature. However, as per the docu "http://www.cisco.com/c/en/us/td/docs/wireless/controller/7-6/configuration-guide/b_cg76/b_cg76_chapter_010111.html#reference_7008E6F7D7094BA7AD39491D7361622D"
The authentication of sleeping clients feature is not supported with Layer 2 security and web authentication enabled.
and as you mentioned as well
...Sleeping client like George mentioned is a better way than adjusting the idle timer but strictly for layer 3 only...
Sleeping Client wasn't an option in my case. That is why I was hoping that Idle Timeout may do the trick here. This is an actual case where a client with an existing wireless network just wanted to enable sleeping client feature so that their guests don't need to re-auth if their device sleeps or they go out (break) and come back after some time. Layer-3 Web Auth alone should be enough I think. Keeping L2-PSK is probably their security team's decision, as they also use the same SSID for BYOD devices and don't want nearby people/buildings to see that there is an Open Wifi available and on joining would see the Web Auth portal and company disclaimer.
George, I agree with Dot1X method. It can be used for the BYOD devices (separate SSID) while we can keep the Guest WLAN as L3-WebAuth only on controller (or do CWA through ISE if available).
Thanks for all your help.
Rick.

WPA2 PSK Help

Hi, i just got verizon Fios and I changed it to WPA2 PSk AES using ASCII. It aways generates the same 26 digit/letter passphrase. Is it safe to use this key? Will other Verizon Fios customers in mny area have the same generarated phrase or is it random for everyone. Thanks for the help!
Solved!
Go to Solution.

Wander wrote:
Yes i have the actiontec rev. F. I didnt enter any passphrase in the pre shared key field, there was already a 26 digit one there, is it saef to use that? WIll other users have the same key?
Most people would eneter some passphrase that is meaningful for themselves rather than relying on something that the hardware manufacturer generated by using some rule that might end up creating the same key for everyone.

Configuring Aironet 1040 with WPA2-PSK

I am attempting to configure two Aironet 1040 series wireless access points for the first time and am having some difficulty. This office does not have a RADIUS server so I would like to set them up to use WPA2 with a pre-shared key. However just how this is accomplished is not immediately apparent. I have attempted using both the command line interface and the web interface, but I get errors in both places. It doesn't seem like it is all that difficult, we're just talking about a few lines in the configuration file.
This is what I have so far:
Current configuration : 1684 bytes
version 12.4
no service pad
service timestamps debug datetime msec
service timestamps log datetime msec
service password-encryption
hostname ap1
logging rate-limit console 9
enable secret 5 $1$q9i9$V8Z042Zif0H7t4qN5awMM.
no aaa new-model
ip domain name Office
dot11 syslog
dot11 ssid WLAN
vlan 30
authentication open
username Cisco password 7 05280F1C2243
bridge irb
interface Dot11Radio0
no ip address
no ip route-cache
encryption mode ciphers tkip
ssid WLAN
antenna gain 0
station-role root
bridge-group 1
bridge-group 1 subscriber-loop-control
bridge-group 1 block-unknown-source
no bridge-group 1 source-learning
no bridge-group 1 unicast-flooding
bridge-group 1 spanning-disabled
interface Dot11Radio1
no ip address
no ip route-cache
shutdown
ssid WLAN
antenna gain 0
dfs band 3 block
channel dfs
station-role root
bridge-group 1
bridge-group 1 subscriber-loop-control
bridge-group 1 block-unknown-source
no bridge-group 1 source-learning
no bridge-group 1 unicast-flooding
bridge-group 1 spanning-disabled
interface GigabitEthernet0
no ip address
no ip route-cache
duplex auto
speed auto
no keepalive
bridge-group 1
no bridge-group 1 source-learning
bridge-group 1 spanning-disabled
interface BVI1
ip address 192.168.2.2 255.255.255.0
no ip route-cache
ip default-gateway 192.168.2.1
ip http server
no ip http secure-server
ip http help-path
http://www.cisco.com/warp/public/779/smbiz/prodconfig/help/eag
access-list 111 permit tcp any any neq telnet
bridge 1 route ip
line con 0
access-class 111 in
line vty 0 4
access-class 111 in
login local
end

OK, I figured out some of what was going on. The admin account was set to read only instead of read/write, and both radios had not been added to my VLAN. Now I have successfully (?) configured WPA2-PSK on both wireless access points, and they are broadcasting their SSIDs, but I am unable to connect to them for an unknown reason. I am prompted for the pre shared key and then the connection fails. Hmm...

WPA2-EAP and WPA2-PSK supported Access Points

Dear Team,
I have been looking to find the Cisco Access Points that support both:
WPA2-EAP: Encryption: AES, Authentication: IEEE 802.1X
WPA2-PSK: Encryption: AES, Authentication: PSK (Pre Shared Key) with more than 21 Characters, combined with MAC address filtering.
I am confused about this and need help, please advise.
Regards,
Farhan

Sure. Go HERE. Click on the APs you want and go to their individual Data Sheets. Use Ctrl+F and enter "WPA2" (or whatever features you want).

Wga54g connecting to sony blu ray using WPA-PSK (TKIP) or WPA2-PSK (AES)

My Wga54g is to be the interenet source to my sony blu ray player. I have a wireless broadband router modem setup that uses WPA-PSK (TKIP) and WPA2-PSK (AES). How do I configure everything to work? Since the WGA54G only does WEP is there a way to configure it or the Sony Blu ray to get a internet signal to it? The sony seems to have a automatic IP or manual IP configuration setting option. I suppose I can step down to WEP on the router settings but I'd rather not. I tried that and couldn't get it to work regardless. Please help!

To connect the Wireless-G Game adapter to a wireless network, please determine your SSID, Wireless Security and/or Network Key. Second you need to lower down the security mode to WEP, since WGA54G do not have any other security mode. Here is the link for connecting the Wireless Network using a WGA54G: http://www6.nohold.net/Cisco2/ukp.aspx?pid=93&login=1&vw=1&app=search&articleid=4558&userrole=Linksy...

The network key you have entered is invalid please enter a network key with 5 or 13 characters

Hi guys im REALLY sorry im sure this has has been answered befor but i have limited access to the inet currently so im trying to get the answer ASAP.
the only post i found about this mensions the router bios upgrade but i doubt thats the issue here. this is on my computer i simply cant enter the password in it says it has to be 5 or 13 characters long and i do not know.seee how to get past this issue... it works on my computers that have "Wireless network monitoy v4.5" but i cant seem to get it working on my new vista laptop but i also had the wrong length error on my XP system when i didnt have the wireless netowrk monitor installed.
long story short my password is 128bit is 7 characters long. so what in the world do i do =( WEP by the way

You confuse the passphrase with the keys. Your passphrase may be seven characters long but your keys are not. The passphrase is used to generate the keys which you can see in the fields key 1-4. Those keys are the keys which you have to enter into your computer. The passphrase won't work often because it is not standardized how to derive the keys from the passphrase. Thus enter key 1 into the computer and make sure you have selected key 1 as transfer key if your router has the option.
The key in the router is in hexadecimals. The computer should easily recognize the format. The key is 5 or 13 bytes long. In hexadecimals each byte has two digits thus your key is either 10 or 26 hexadecimals long. With 128bit keys it is the latter.
I would recommend to use WPA or WPA2 with pre-shared key instead. WEP can be cracked within minutes. WPA is considered secured. Plus there is only the passphrase. For WPA/WPA2 the way how to derive the actual key from the passphrase is standardized. Thus there is nothing to confuse...

How to enter WPA2-PSK key ?

Similar Messages

Maybe you are looking for