How to erase a motion icon?

Hello!
Does anybody knows how to erase or how to stop a moved object
(which is moved by a motion icon). I would like to avoid erasing
the display icon, where the moved object is in.
Thanks for comments!
Jeanette

Move it with a motion icon set to the current position.
"Jeanette" <[email protected]> wrote in
message
news:e38642$qou$[email protected]..
> Hello!
> Does anybody knows how to erase or how to stop a moved
object (which is
> moved
> by a motion icon). I would like to avoid erasing the
display icon, where
> the
> moved object is in.
> Thanks for comments!
> Jeanette
>

Similar Messages

  • How to erase the existance of a Time capsule

    Hi,
    I would like to know how to erase the existance of a Time capsule, like it never existed, because sometimes I can see remains of my old network, and I'd like to know how to reset all this,
    sincerely

    Welcome to the discussions!
    You will want to do two things to get the TC back to total factory defaults:
    1)Return all configuration settings to factory defaults
    2)Erase your disk. (Do this only if you want to erase all of your backups).
    Power down the TC for a few minutes
    Hold in the reset button and KEEP holding it in as you plug the power back in
    Release the reset button after approximately 10 seconds
    Your configuration is now reset to factory defaults.
    To erase the disk:
    Open AirPort Utility, click Manual Setup
    Click the Disk icon at the top of the setup pane
    Click the Disks tab just below the icons
    Click Erase. Choose your erase options only if you want to erase all backups.
    That's it.

  • How to erase and install new version os Mac Os X?

    Can someone tell me how to erase and install new copy of Mac OS X 10.5.8 ?? IS there a way to do this without CD?? I no longer have the disks and I cant find a way to get this done.. The reason I want to do this is because a 12 year old was using this computer for a long time and there is a lot of junk stuff on the disk, so I want to start from fresh.
    Thank you in advance.
    Yani.

    Hi Yani,
    Your out of luck without an Install Disc, & on dangerous ground also.
    2 ways to go...
      1. Insert the Mac OS X Install disc that came with your computer, then restart the computer while holding the C key.
       2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu. (In Mac OS X 10.4 or later, you must select your language first.)
          *Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.*
       3. Click the Erase tab.
       4. Click the disclosure triangle to the left of the hard drive icon to display the names of your hard disk volumes and partitions.
       5. Select your Mac OS X volume.
       6. Highlight the drive, select Partition Tab, then Format type... MacOS Extended Journalled, select the Security Options button, choose Zero Out Data, Erase... after completion do a new install.
    Or...
    Open System Preferences>Accounts, unlock the lock, click on the little plus icon, make a new admin account, log out & into the new account.
    In the same pref pane highlight your old account, click the little minus icon, then use Disk Utility to Secure Erase Free Space.

  • How to erase all 9 last dialed numbers from a Treo 750

    Dear Friends,
    Does someone knows how to erase all the last 9 dialed numbers that appears in a Treo 750 when the left green (phone Icon) key is pressed?
    Just in case, I already tried to erased them using the "Call Log" Menu "delete All Calls" option, but it does no erased the 9 last call numbers listed when the left green (phone Icon) is pressed.
    Thanks for your help.
    Alex
    Post relates to: Treo 750 (AT&T)

    Hi..  Welcome to the Palm forums.   Unfortunately there is no easy way to eliminate those last 9 calls.  As you have already found out deleting the call log removes the bulk of the log but leaves the last 9.  The only way to remove them would be to do a hard reset which would also delete all data on your device.  Now you may find a third party application for windows mobile that will help with this issue but there is no simple way to remove those calls.  
    Message Edited by rhaw on 04-07-2009 04:43 PM

  • How to erase web history from safari.

    I need to know how to erase from my IPad, web history, caches and cookies from safari web browser.

    System app... Click on Safari from the left side bar... You will see the the buttons to erase cookies, cache and history. You can erase history from Safari... Bookmark icon... History... Clear History button.
    Message was edited by: David M Brewer

  • How to erase a app in iPod touch

    can some body tell me how to erase an app I downloaded in my ipod touch ? I just down loaded a free app that I do not want. It is cool I am able to write this on my ipod touch &posted it. snow

    press the icon until they start shaking, then you will see an x in the upper left corner of the app. push it and the app will be uninstalled on your touch.

  • How to erase a MacBook from a pawn shop ?

    Here's a synopsis of what I'm dealing with. Ive never owned a MAC before so I thought instead of spending a grand for a new one I would see if i could find one locally. so I purchased an early 2008 Black MacBook with OS X 10.7.4 Lion from a local pawnshop. The person who had it before me was still logged on and it had all kinds of accounts set up and such. So I went online and researched how to erase all of that. I did the restart holding the option key which brought me to the MAC OS X Utilities. I selected Disk Utility then selected Macintosh HD and then the Erase Tab. After that I clicked security options and then selected single pass of Zeros. Clicked ok and the  clicked erase. It took about an hour and then I selected to erase the free space. After that I went to to the MAC OS X utilities options box and selected Reinstall MAC OS X. All said and done its now asking me to input my Apple ID and then it says my ID has not purchased the operating system.
    Now what do I do ?
    Do I really have to go to the iTunes Store and buy lion ?
    If that's the case Mountain lion is only $20 will that work as well?
    Once I purchase the software, do I go through the motions again to have it installed like before ?
    Should I just buy a hard copy rather than doing it over the Internet ?
    Much needed help would be appreciated. I've spent days working in this and now my GF wants to kill me. I need this fixed soon.

    Buying a used Mac from any source is best left for experienced Mac users, for the very reasons you described.
    At best you purchased an expensive education, at worst, stolen goods.
    All said and done its now asking me to input my Apple ID and then it says my ID has not purchased the operating system.
    A 2008 Mac would not have had OS X 10.7.4 "Lion" already installed, and it is impossible for you to install it from the Recovery partition since the license to use Lion is not transferable by any means. The seller (more than likely, the thief who stole it) erred in not restoring the Mac to its original condition before selling it to the pawn shop. Without that MacBook's original System Install DVD - which the pawn shop didn't supply, right? - it will not be useful to you.
    There are no "hard copies" of Lion available. Lion exists only as a download from Apple, whose servers check your MacBook for a legitimate purchase of it.
    Your best alternative is to phone Apple at the number shown on the Apple Online Store website. Explain that you purchased a used Mac and require a replacement System Install DVD. Use those exact words. Have the MacBook's serial number ready for them - it will be required.
    Determine the Mac's serial number using the following: http://support.apple.com/kb/HT1366
    Apple will collect a nominal fee, $25 or so. Once you get the disc, boot from it by starting the Mac by holding the c key with the disc inserted, and pray the original owner did not configure a Firmware Password.
    Reinstall its original operating system from that disc, after which you will have reached Step 1 toward using your Mac.
    After installing it, you will need to purchase Snow Leopard from the Apple Online Store, unless its original OS was already Snow Leopard (yours was probably OS X 10.5.2 "Leopard"). Snow Leopard costs $20.
    Only after installing Snow Leopard can you purchase Lion from the App Store. You will need to call the Apple Online Store again and purchase a download code since Lion no longer appears in the App Store. That will be another $20. You will "redeem" this code in the App Store.
    Your MacBook is too old for Mountain Lion.
    Total cost: $65 + tax + whatever you already spent.
    Tell your GF she was right. Do that now, to prevent further compounding your misery

  • How to erase an app from de Launchpad if I already erased the files and tried to move it to the trash?

    How to erase an app from de Launchpad if I already erased the files and tried to move it to the trash?

    Erased what files? You say "tried" to move it to the trash... I assume that means that you were not successful?
    Removing an app from LaunchPad requires deleting the app. In general, if you're trying to delete an app that was installed from the App Store, simply open the LaunchPad, click and hold on the app icon in the LaunchPad until all the icons start "wiggling," and then click the 'X' at the top left corner of the app's icon. If the app was not installed from the App Store, you need to use whatever uninstaller was provided by the developer of that app.

  • How to erase and reset your Galaxy S6 (and why you'd want to)

    Samsung has included some additional features to this function just in case you're doing something other than handing your Galaxy S6 off to another user.
    How to erase and reset your Galaxy S6 (and why you'd want to) | Android Central

    Hi,
    I'm in the same boat. I have an older 13" black MacBook and bought a new 13" MacBook Pro. Your outline isnt' what I experience, yet it's similar to the Apple Article at
    http://support.apple.com/kb/HT1820
    They have the following steps:
    These steps assume you have a Mac OS X 10.2.3 or later CD:
    1. Insert the Mac OS X CD.
    2. Restart the computer.
    3. Immediately after the startup sound, press and hold the "C" key to start up from CD.
    4. When the Installer screen appears, do not click Continue. Instead, choose Installer > Open Disk Utilities.
    5. Select the hard drive to erase.
    6. Click the Erase tab.
    7. Select the volume format from the Volume Format pop-up menu.
    8. Click Options.
    9. Select the checkbox for "Zero all data".
    10. Click OK.
    11. Click Erase
    I'm not sure if I'm obtaining what I want; Zero erase then reinstall. I'm using my OS X Leopard Install Disk. I did steps 1 - 3. As I held the "C" key, I got a gray screen with the Apple logo and a spinning icon below. It did this for about 3 minutes (my "c" holding finger was getting sore )
    I never got a step 4. It went straight to "Choose a Language" I did: English
    I never got choices 5 to 11.
    I got the screen showing the drive and asking if I want to install. I continued.
    I then opened the "Options" tab. There I could erase existing OS install and then reinstall. There was never a choice for "Zero All Data."
    I'm currently letting it do it's thing and it's in stalling, about 26 mins to go, already been about 20 mins.
    Did I miss something, or is the "zero" option not the same for Leopard?
    Much thanks,

  • Blocking mouse movement while using a motion icon

    Hey guys,
    now that I know how to automate items in authorware by using the motion items I do have the problem that during the time, when the animated items moves along a specific predetermined path the mouse cursor is still on the screen and can be moved by the participant/respondent. I need the mouse cursor either to disappear or to not be movable during that time. Is there a possibility to block out participants entry (mouse movement) while the motion icon operates?
    Very thankful for any advice on that!
    Darja

    Oh no, there are four or five Authorware supporters here. Some even more active than I am.
    Mike

  • How to erase photo library on iPhone 5 iOS 7.1

    Does anybody know how to erase photo library on iPhone 5 using iOS 7.1?
    It cobbles up 6.5 Gig and run out of storage, it seems to come on automaticaly from my Macbook Pro.

    1. Photos from computer, add/delete via computer iTunes.
    Connect and select iPhone on your Mac iTunes, de-select the photos and do a sync.
    2. Photos from iPhone camera or downloaded from Internet: tap image, tap trash icon.

  • How can I move an icon/file from one screen of my ipad to another?

    How can I move an icon/file from one screen on my ipad to another?

    Press and hold the icon until they start to wiggle. Then while holding it, drag it to the edge of the screen and wait for the page to switch, then let go of the app

  • I have a website listed as an extension. How do I get the icon into my desktop or on the toolbar?

    I have the Grammarly website icon on my list of extensions. Its supposedly one of Firefox add ons. How do I move this icon to either the desktop or bookmarks or the Firefox toolbar? Anywhere so I can access it.

    Thanks for your reply, but sorry, still no luck.
    If I go to the Grammarly web-site, the only option presented is a subscription, for a fee. Bookmarking doesn't help; it's the same page.
    So I go to tools, clik on Add-ons, and pull up the Mozilla Firefox page offering Grammarly Lite, Free. I clik on the yellow button that says, Add to Firefox, and it then appears as an extension. That's as far as it goes.
    I need a firefox/grammarly icon, or something, to clik on and open it up so I can use it. I don't understand, Firefox has been my browser for years???
    Thanks, John

  • I down loaded sygic on my iPhone 3s but the icon is missing even in the search but when I want to download it again ,it say this application is present, how can I make the icon to show up

    I down loaded sygic on my iPhone 3s but the icon is missing even in the search but when I want to download it again ,it say this application is present, how can I make the icon to show up

    - Have you tried a reset. Nothing is lost
    Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Try syncing  the iPod to your computer. Then delete from iTunes and sync. that should delete it from the iPod. Then redownload it.

  • How do I retrieve the icons in the download map of my 2009 iMac with Maverick. They show up in the finder, but not when I open downloads from the dock.

    I have a 2009 iMac running on Mavericks. Since a few days, when I open the Download Map from the dock, I only see "empty" icon symbols. When I leave the map open the icons re-appear after some 20 seconds. When I re-open the downloads, the icons are empty again.
    How do I get the icons to behave in a normal way again?

    bro I just had this issue its as simple as swiping to the right of each album artwork that does not display in the list view (On your Iphone.) Once you swipe to the right on every album that does not display in the list view you will see the delete option come up. Hit delete! Dont be scared. Do this with every album art that does not show up and then resync your Iphone. Go to the list view again and all of your missing album artwork will be displayed in both the list overview and close up landscape mode.

Maybe you are looking for