How to exclude a single database from the transaction log backup

How do I exclude a specific backup from Backup TLOG job?
C:\Progra~1\Tivoli\TSM\TDPSql\tdpsqlc"  backup * log  /tsmoptfile="C:\program files\tivoli\tsm\tdpsql\dsm.opt" /sqlserver=
Please advise what do I need to write instated of backup * to exclude one database from this backup job
Best regards,
Vishal

You have to skt the maker of the backup tool. It isn't SQL Server or its tool that initiates the backup commands. It is apparently your Tivoli application (judging by the file path you posted).
Tibor Karaszi, SQL Server MVP |
web | blog

Similar Messages

  • Urgent: How to exclude a particular value from the selection in the infopac

    How to exclude a particular value from the selection in the infopackage.
    Ex: not load for cost center 10000
    Thank you,
    sam

    Hi Sam,
    You cannot do this directly as exclusion, but you can include all other values, even as ranges and thus exclude the particular value, else you can also try to do this by writing a routine.
    Hope this helps...

  • How do I remove a File from the Time Machine backup?

    How can I delete a very large folder (30 gb) that I do not need on my time machine backup? I was transferring the file from one computer to another and TM backed it up while it was on my Macbook Pro. Now I have this massive file on my external (time machine) hard drive that I do not need.

    In Finder, open the folders until you can see the folder icon for the folder you want to delete.
    Launch Time Machine. It should open a similar view of what you were looking at in Finder.
    Select the folder, and click on the "Gear" icon at the top of the window and choose "Delete All Backups of "nameofyourfolder"".

  • Rerun failed queries from transaction log backup files

    I recently ran into an issue where live production data was failing to insert into my database. When my windows service inserted data the query failed and returned an error message indicating that the transaction didn't succeed.
    After restarting SQL the insert statements started working again as they had before. However, because of this I missed about 24 hrs worth of important production data. My server is currently configured to make database backups every 24 hours and make transaction
    log backups every hour.
    Is it possible to reapply the SQL queries that failed from the transaction log backups? I understand the transaction log backups contain information about what in the database changed, but does it contain the statements that attempted to run but failed?
    thanks for any help!

    Thanks for all the replies. Here's the error message I'm getting..
    An error occurred in
    the Microsoft .NET Framework while trying to load assembly id 1. The server may
    be running out of resources, or the assembly may not be trusted with
    PERMISSION_SET = EXTERNAL_ACCESS or UNSAFE. Run the query again, or check
    documentation to see how to solve the assembly trust issues. For more
    information about this error: System.IO.FileNotFoundException: Could not load
    file or assembly 'microsoft.sqlserver.types, Version=11.0.0.0, Culture=neutral,
    PublicKeyToken=89845dcd8080cc91' or one of its dependencies. The system cannot
    find the file specified. System.IO.FileNotFoundException: at
    System.Reflection.RuntimeAssembly._nLoad(AssemblyName fileName, String
    codeBase, Evidence assemblySecurity, RuntimeAssembly locationHint,
    StackCrawlMark& stackMark, IntPtr pPrivHostBinder, Boolean
    throwOnFileNotFound, Boolean forIntrospection, Boolean suppressSecurityChecks)
    at System.Reflection.RuntimeAssembly.InternalLoadAssemblyName(AssemblyName
    assemblyRef, Evidence assemblySecurity, RuntimeAssembly reqAssembly,
    StackCrawlMark& stackMark, IntPtr pPrivHostBinder, Boolean
    throwOnFileNotFound, Boolean forIntrospection, Boolean suppressSecurityChecks)
    at System.Reflection.RuntimeAssembly.InternalLoad(String assemblyString,
    Evidence assemblySecurity, StackCrawlMark& stackMark, IntPtr
    pPrivHostBinder, Boolean forIntrospection) at
    System.Reflection.RuntimeAssembly.InternalLoad(String assemblyString, Evidence
    assemblySecurity, StackCrawlMark& stackMark, Boolean forIntrospection) at
    System.Reflection.Assembly.Load(String assemblyString)
    Basically SQL was having difficulty reading the microsoft.sqlserver.types.dll assembly. This assembly is used for interacting with the Geography data type. I was getting this error message directly from within SSMS - not just in my .net app. Also, there's
    not triggers on this table or any custom SQL besides my insert statement.
    Then consensus I'm getting is that this isn't really possible to do using transaction logs without extreme difficultly. I installed the ApexSQL before posting on this forum but I wasn't able to find my insert statements.

  • Why is the transaction log file not truncated though its simple recovery model?

    My database is simple recovery model and when I view the free space in log file it shows 99%. Why doesn't my log file truncate the committed
    data automatically to free space in ldf file? When I shrink it does shrink. Please advice.
    mayooran99

    My database is simple recovery model and when I view the free space in log file it shows 99%. Why doesn't my log file truncate the committed
    data automatically to free space in ldf file? When I shrink it does shrink. Please advice.
    mayooran99
    If log records were never deleted(truncated) from the transaction log it wont show as 99% free.Simple recoveyr model
    Log truncation automatically frees space in the logical log for reuse by the transaction log and thats what you are seeing. Truncation wont change file size. It more like
    log clearing, marking
    parts of the log free for reuse. 
    As you said "When I shrink it does shrink" I dont see any issues here. Log truncation and shrink file is 2 different things.
    Please read below link for understanding "Transaction log Truncate vs Shrink"
    http://blog.sqlxdetails.com/transaction-log-truncate-why-it-didnt-shrink-my-log/

  • Hello Anybody, I have a question. Can any of you please suggest me how to make an xml file from the database table with all the rows? Note:- I am having the XSD Schema file and the resulted XML file should be in that XSD format only.

    Hello Anybody, I have a question. Can any of you please suggest me how to make an xml file from the database table with all the records?
    Note:- I am having the XSD Schema file and the resulted XML file should be in that XSD format only.

    The Oracle documentation has a good overview of the options available
    Generating XML Data from the Database
    Without knowing your version, I just picked 11.2, so you made need to look for that chapter in the documentation for your version to find applicable information.
    You can also find some information in XML DB FAQ

  • How do I scan multiple documents to a single pdf from the ADF on my MX922?

    How do I scan multiple documents to a single pdf from the ADF on my MX922?
    Solved!
    Go to Solution.

    Hi Riceburner1,
    Since you have had difficulty scanning using My Image Garden, you can scan using the IJ Scan Utility program that also comes with the printer.  To do this, please follow these steps:
    1. Place the documents in the ADF or on the platen glass of the printer.
    2. Start the IJ Scan Utility.
        For Windows 8.1:
        1. On your keyboard, press the Windows key.
        2. Start typing IJ SCAN UTILITY. The search window opens as you type. Once the IJ SCAN UTILITY is displayed, please select and open it, then continue with Step 3 below.
        For Windows XP:
        1. Go to your START MENU, then select ALL PROGRAMS, then CANON UTILITIES, then the IJ SCAN UTILITY program.
        2. In the Canon IJ Scan Utility window that opens, click SETTINGS.... in the bottom right of the window. The Settings dialog box appears. Please continue with Step 3 below.
    3. In the Canon IJ Scan Utility window that opens, click SETTINGS.... in the bottom right of the window. The Settings dialog box appears.
    4. Click the DOCUMENT SCAN option on the left pane of the window. In the Select Source field of the Scan Options section, select DOCUMENT (ADF/PLATEN) to scan items placed directly on the platen glass, DOCUMENT (ADF SIMPLEX) to perform single-sided scanning from the ADF, or DOCUMENT (ADF DUPLEX) to perform double-sided scanning using the ADF. You can then set the item size, resolution, etc. in the Scan Options section as desired.
    5. In the SAVE SETTINGS section of the window, you will select the save format and location of the document you are about to scan.
         a.) In the FILE NAME field, specify the name you would like to give the file. By default the filename will begin with IMG; you can remove IMG and change it to whatever you would like to name the file.  Please note that the filename that you give the document here will be the default filename for all items scanned until you change the file name.  If you leave the file name the same in the field, the scanned item will have a sequential number appended to the end of whatever name you give it.
         b.) In the DATA FORMAT field, use the drop-down arrow to select the desired option. If you are scanning a multipage document, select the PDF (Multiple Pages) option.
         c.) In the SAVE IN field, please navigate to the area where you would like the file to be saved once it is scanned in. By default, the file will be saved in the MY DOCUMENTS folder.
    6.  In the APPLICATION SETTINGS section of the window, please select the DO NOT START ANY APPLICATION option.  
    7. Once all settings have been selected, click the OK button at the bottom of the SETTINGS (DOCUMENT SCAN) window. The IJ Scan Utility main screen appears.
    8. Click the DOCUMENT button. Scanning starts. Click the CANCEL button to cancel scanning if needed.   Once the scan is completed, scanned images are saved in the previously selected folder location specified in the SETTINGS... window.
    Hope this helps!
    This didn't answer your question or issue? Please call or email us using one of the methods on the Contact Us page for further assistance.
    Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

  • DATA TRANSFER - How to get a SINGLE SPACE in the downloaded file from UNIX?

    Hi Experts,
    Am sending data from SAP to UNIX/ Application server and text file on desk top as well.
    So, I am keeping a single character just SPACE at the END of each record.
    Then, When I see the downloaded text file, I found a SINGLE SPACE at the end of each record, fine.
    Then, by using CG3Y t code, I downloaded the UNIX file to my desk top.
    But, When I see this UNIX downloaded file from UNIX, I did NOT find any SPACE at the end of each record!!!
    Am doing every thing same in both cases.
    So,
    1 - Why its happening in case of UNIX file?
    2 - How to get a SINGLE SPACE  at the END in the downloaded file from UNIX?
    thanq

    Hi,
    I don't know if this works:
    perform SET_TRAIL_BLANKS(saplgrap) using 'X'.  
    perform SET_FIXLEN(saplgrap) using '0' '060'.   "put length of your line from-to
    ... download ...
    It will put space at the end of your line, according to the length.
    Hope it works,
    Chang

  • Is it possible to exclude single contacts from the mute? For example: I want to hear when I recieve an SMS alert even if I mute my iPhone 4.

    Is it possible to exclude single contacts from the mute? For example: I want to hear when I recieve an SMS alert even if I mute my iPhone 4 (I am a fireman).

    No iPhone apps have access to the necessary API's to do so...they're all sandboxed.

  • How to install Pro*C apart from the database?

    I would like to know how one could Pro*C apart from the database. Thanks.

    Just unzip all Instant Client zip files in the same directory, they all have "instantclient_11_2" as first path element,
    so everything will end up in the right place in this directory.
    If your Instant Client directory has a different name, unzip the package somewhere and move all files and
    directories in it to your instant client directory.
    Yours,
    Laurenz Albe

  • How to check my job name from the database...

    I have written one job scheduler which is as follows :
    SQL> ED
    Wrote file afiedt.buf
    1 DECLARE
    2 X NUMBER;
    3 JobNumber NUMBER;
    4 BEGIN
    5 SYS.DBMS_JOB.SUBMIT
    6 (
    7 job => X
    8 ,what => 'scott.SPLITSMS;'
    9 ,next_date => SYSDATE+1/1440
    10 ,interval => 'SYSDATE+1/1440 '
    11 ,no_parse => FALSE
    12 );
    13 JobNumber := to_char(X);
    14* END;
    15 /
    PL/SQL procedure successfully completed.
    Now I want to check whether the job has been really created or not?
    so for that I have used the following command line:
    SQL> SELECT JOB_NAME FROM DBA_SCHEDULER_JOBS WHERE JOB_NAME = 'SCOTT.SPLITSMS';
    SELECT JOB_NAME FROM DBA_SCHEDULER_JOBS WHERE JOB_NAME = 'SCOTT.SPLITSMS'
    ERROR at line 1:
    ORA-00942: table or view does not exist
    how to check my job name from the database...
    what is the command used to check the job_name ????
    and how can i ensure that my job scheduler is running properly...???
    please help ........my dear friends.....!

    957029 wrote:
    Now I want to check whether the job has been really created or not?
    so for that I have used the following command line:
    SQL> SELECT JOB_NAME FROM DBA_SCHEDULER_JOBS WHERE JOB_NAME = 'SCOTT.SPLITSMS';
    SELECT JOB_NAME FROM DBA_SCHEDULER_JOBS WHERE JOB_NAME = 'SCOTT.SPLITSMS'
    ERROR at line 1:
    ORA-00942: table or view does not existYou can use DBA_* views only if the User has been Granted a DBA Privilege.
    how to check my job name from the database...
    what is the command used to check the job_name ????You can use USER_JOBS view to check. But, is it not that you have just created the Job, so you must be knowing it?
    and how can i ensure that my job scheduler is running properly...???If USER_JOBS.FAILURES is Non Zero, that means the Job has encountered a problem that needs to be Investigated. Similarly, the LAST_DATE, LAST_SEC, NEXT_DAY, NEXT_SEC can be used to determine if the Job has been running successfully.
    if you are on 11g, you should consider using DBMS_SCHEDULER.

  • How to delete the single record from the  ODS

    HI,
       I want to DELETE  the particular record from ODS.. how to delete that..
    plz give me the solution.. it's urgent..
    with regards
    @jay

    Hi Prakash,
        You can delete a particular record from ODS by specifying the key field name in Selective deletion button available in Contents tab in the manage screen of ODS. But it will only delete the record from the active data table and not from the Change log and new data table . You should be very carefull if you are doing in Production system as there is chance of deleting other records accidentally.
    Go to Selective deletion button - > Click on delete selection -> Enter the key field values of the record you want to delete-> Press save button to save as Variant -> Go back and click on selection button -> Chosse the background job type -> Click on start button.
    Regards,
    Prakash

  • HT203167 I lost all content on my laptop and had to revert to original settings - how do I get my music from the Ipod to the computer?

    I lost all content on my laptop and had to revert to original settings - how do I get my music from the Ipod to the computer?

    Empty/corrupt library after upgrade/crash
    Hopefully it's not been too long since you last upgraded iTunes, in fact if you get an empty/incomplete library immediately after upgrading then with the following steps you shouldn't lose a thing or need to do any further housekeeping.  Note that in iTunes 11 an "empty" library may show your past purchases with links to stream or download them.
    In the Previous iTunes Libraries folder should be a number of dated iTunes Library files. Take the most recent of these and copy it into the iTunes folder. Rename iTunes Library.itl as iTunes Library (Corrupt).itl and then rename the restored file as iTunes Library.itl. Start iTunes. Should all be good, bar any recent additions to or deletions from your library.
    See iTunes Folder Watch for a tool to catch up with any changes since the backup file was created.
    When you get it all working make a backup!
    Should you be in the unfortunate position where you are no longer able to access your original library, or a backup of it, then see Recover your iTunes library from your iPod or iOS device.
    Would you mind telling me which anti-virus package you use? It may be that it is disturbing iTunes when it tries to write out the fresh database, as it does after almost any activity with your library. I'm noticing more of this type of problem than usual and trying to see if there is any pattern. It may help to prevent a repeat of the problem if you look at the advanced options for your AV package and see if you can find a way to exclude the iTunes folder from any real-time scanning process.
    tt2

  • How to delete a single request from DSO in BI 7.0

    Dear Experts,
    Could you please tell me how to delete a single request from DSO?
    I mean, in DSO if we delete one request it also delete the requests which are above it. But i don't to delete the above it.
    Please suggest me this issue.
    Regards,
    Prathap

    IN DSO--its a very basic thing....
    ACTIVE TABLE and CHANGELOG tables are overwritten after activation of each request.
    So ,each new request has a realationsip with the older request.
    So in the cases:
    1.If you activate the older request it will delete the new one ,because changelog entries have been written from the data of new request on the basis of the older one.
    e.g older request  entries:
    a x 1
    new request
    a x 2
    change log
    a x 1
    a x -1
    a x 2
    so its quite obvious you can't have  a x 2 directly (because in the infocube you will be sending wrong entries by deleting the just the older request and loadning new request).
    2.If you have activate new and old request toghterh then also system will not allow you to delete the newer request alone and you will have to delete both the requests.
    I guess already someone proposed correct solution to you ...thats selective deletion...but rahter than doing selective deletion there is a better way if you want to cancel out a particular request:
    thats request reverst posting
    IN the process monitor of any particular request you can find out the option for request reverse posting..Its good for individual request cancellation(keyfig values will become 0 for that particular request)
    regards,
    rk

  • HOW TO USE FUNCTION Deletion of Requests from the Change Log IN PRCSES CHAN

    Respected all
    i used Deletion of Requests from PSA from the prcess chain and found good results, now i have only one request at the psa and thus i am doing good space utililisation. but when i am using Deletion of Requests from the Change Log i am not getting any changes in the request of dso. kindly let me know how to use this 2nd function.
    thanks
    abhay

    Hi Mahodaya,
    As per SAp standards its good to delete the requestes that are no longer needed for the delta update and no longer used ffor inti from the change log table and the data is loaded already in to DSO.
    Goto RSPC
    Click on create New PC -> enter the PC name n long descp
    Next we need to define the start process for the PC.Maintain the start variant process.save n come back.
    for deletion of change log we have option in the Other BW Processes -> deletion of requestes from change log
    Once u select the option we get a dialoge box here we need to create the variant for the process enter the process variant n long descp. cick ok.
    Next in the maintenance screen for the deleting the request from change log table will appear.
    Enter the selection patterns to which the requestes should be deleted from the change log.
    In the maintenance screen, select one or more Data Store objects for which requests are to be deleted from the relevant change log tables under Data Store Object column and select theInfo Area of the corresponding Data Store Objects under Info Area
    If you select the first check box exclude selction pattern, this means that del of requests from change log table will be ignored.
    or
    We can delete the requests which are Older than N-number of days (or) date in the above screen. For this one, enter the number of days (or) date in the filed Older than .
    OR
    If we want to select the requests with a certain status then we can also do in the above screen. We can select the following status indicators from the above screen.
    Delete Successfully Updated Requests Only -This status will delete only requests which
    are successfully updated into corresponding Data Store objects.
    Delete Incorrect Requests that were not Updated - This status will delete only incorrect requests which are not successfully updated into the corresponding Data Store Objects.
    Delete Activation Requests only, No Load requests- This status will delete only the activation requests (requests that begin with ODSR_... ). No load requests are deleted.

Maybe you are looking for