How to exclude suffix in material

Dear experts,
Please check below requiments
When I run the report
I would like to exclude the end suffix on all material. For example for model TX-P50G20E (274 pcs) and TX-P50G20ES (131 pcs) I want the report to show only TX-P50G20 (405 pcs).
Any one know what settings I should do in the BW-report to exclude E and ES in this case above?
Regards,
Puru

You can write a formula for the material in the transformation level
Select Function of Character Strings from the right panel-->then double click Left N Chars --> Now you can see pass the values in the parenthesis EX: Left(9,0material) so it will display only TX-P50G20 in the output
Edited by: YJV on Aug 9, 2010 2:08 PM

Similar Messages

How to exclude stock of a particular storage type from collective availabil

How to exclude stock of a particular storage type from collective availability check in MDVP.

you can set the storage location as 'Storage location stock excluded from MRP' value '1' in the field
Sloc MRP indicator , in MRP view $ when you enter a storage location accessing the material master.
Thsi is the only way to exclude the storage location, you have to do it per each material and also it is excluded from the MRP.
With this option the stock is not considered in ATP.
IF you need the storage location in the MRP, then you should consider the use of MRP Areas.
With the MRP Areas you define which plants/storage locations belong to each MRP area and the ATP is performed for eah area with the stocks that exist in each of them.
Please if the issue is solved set the thread as answered and provide the points to the useful replies.
thanks for your cooperation

How to exclude a set of materials from cycle counting physical inventory

How to exclude a set of materials from cycle counting physical inventory
Details:
Set of material to be uploaded to SAP on say Jan-2011 from another system with cc indicator D:once
in a year and fixed,before uploading into SAP physical inventory will be done .
So we donot want again those materials to fall in the cycle counting in the same year.
So is there a method to exclude these materials from CC counting for the year 2011
or is there some way to upload last inventory count date in SAP system so that it will exclude those
materials?
Any answers will be appreciated.
Thanks
Bijay

HI Antony
Thank you for your reply.
If material count is less than this method is well valid.
IN our case there are 7lakhs materials and having diff cc indicator A,B,C,D...
So it will cumbersome for client to keep track of all those materials when to update cc indicator.
So any other thought? can we upload last count date while updating materials details or similar
Thanks
Bijay

MI31 - Phy Inv. - how to exclude Variant Config Materials

For our Variant Cofiguration Materials (parent materials) we don't have stock to count for the physical inventory (MI31). The company would like to exclude these items from the material selection automatically.
I've looked around in the IMG for material master and in physical inventory but I didn't find anything that looked like a "exclude from Phys Inv." indicator or anything that could be used on one of these materials.
The site could "exclude" the individual material #'s in the selection screen of the MI31 transaction and save a variant or something...but it would have to always be monitored when new materials were created, etc. Company would like to know if there is a configuration setting of some kind that can exclude a Variant Material from the phys inventory run.
Any ideas would be appreciated.
Thanks,
Jason

what is wrong with ACC TO STOCK settings?
Does it exclude to much? more than you expect?
Unfortunatly you have not done anything in your design to distinguish Variant Config Materials from standard materials.
Same material type mean probably the same number range as well.
I have other ways to select, but it depends on the number of materials that are in this material type.
How many do you have in that material type, how many do you want to exclude.
How often will you count?

How to exclude particular IPC from Rebates

Dear SDN Team,
Customer want to create some rebate in order to pay later on a promotional basis for the particular IPC.
But they want to apply accruals on all IPC but by excluding particular IPC from Rebates, How to exclude the particular IPC from Rebates.
Because customer want to exclude one IPC of the rebates calculation for only one rebates -
Any Idea.
For the above request i have suggested below solution - But it does not resolve their problems. But User is expecting further any other idea in order to resolve the above requirement.
First Solution:
In order to exclude the IPC for Ecopia from the rebates calculation- this can be done by setting the Material group in the Material Master - Basic Data1 view and you can exclude these IPC's while creating the condition records in the Rebate Agreement type. By doing this we can exclude the rebates for the Ecopia tyres.
Second alternative: If you have already created the Rebate condition record for the Ecopia tyres then you can set the deletion indicator flag in the rebate condition for the particular IPC.
Can you suggest any ideas in order to resolve this problem.
Looking for your feedback.
Thanks and Regards,
Jana

Dear,
even if was not clear about the type of material you were reffering to, I analysed your request and I consider that you may proceed as follow.
To achieve this result you do NOT have to modify the material master.
Assumptions taken:
A- you have to exclude only one material from the rebate calculation for only one rebate
B- all other rebates do not have to be impacted by this exceptional rebate configuration
C- material nr1 is the material to exclude
D- material nr1 has a product hierarchy 00X (Line X)
Procedure to achieve the objective:
1) create a promotional rebate (RebateA) for the full Line X and set it relevant for accrual (define a percentage for accrual)
2) create a promotional rebate (RebateB) for the single material nr1 and set it NOT relevant for accrual (no percentage for accrual)
3) set the same percentage to pay or amount to pay to the customer in both rebates (A & B)
4) set the same validity start-to for both rebates (A & B)
5) define a percentage of accrual only for the first rebate (A only)
The second rebate created (RebateB) will help in order to pay the right amount to the final customer.
In order to perform a final settlement you will have IDEALLY simply subtract the values: RebateA - RebateB.
There is no standard way to exclude single material from a single rebate without impacting the other active rebates.
Of course, modify the material master is not the solution. Any change in material master will impact also open rebates and future rebates.
For these reasons here above there is a business scenario you may apply to achieve the objective and it will not take a lot of time to maintain it.
In case of questions or doubts to not hesitate to post your answer back to this post.
Regards,

How to exclude salary arrears from pension deduction?

I have setup a pension retro element and its calculating the retro amount correctly.
However, its using sum of salary arrears (say,arrears for the month of March and April) and adding that to May salary and deducting pension on the total sum.
(we do not want this, we want only May salary to be considered for pension retro element)
Does anyone know how to exclude salary arrears from pension deduction element? Is there any obvious step, which I am missing in while defining the element?

Hi,
While doing retro for arrears, it will give at a time in one payroll only, no standard for installment payments.
2nd option:
Calculate the Total Arrears amount and divide it by four installments and through IT 0014 with New wage type and give for 4 months as start and end date.
* you have to create a new wage type which is taxable and assigned to IT 0014.
* add this new wt in Remuneration form in Earnings side.
Regards,
Praneeth kumar

How to look for kMAT material in Testing client?

Hi PP members:
How to look for KMAT material in Test client,
Note: I went to mm60 and entered material type: KMAT it did not populate any
materials
Is there any way where I can find the materials, If yes please let me know
thanks
Suren

Hi Saritha:
When I went to SE16, and entered MTART as KMAT it giving the following
It is replying me back "No table entries found for specified key"
Also want to bring to your kind attention I left MATNR field blank as I donot know
the VC materials
thanks

How to exclude open items by credit exposure calculation

Dear all,
as anybody idea about how to exclude by the credit exposure calculation some old items (in our case all items having document date lower than 01.10.2005).
These are the basic assumptions:
i cannot use a special G/L indicator because some of them already have one and i cannot change it;
i cannot use the reason code field because it doesn't appear on all items (e.g., negative amount open items, and some others)
some items are positive, some other are negative, some have a special g/l indicator and some others not.
therefore i am forced to change rules of calculation. Is there any user exit o bte?
thanks a lot!
Edited by: Alessandro Casarico on Aug 31, 2010 8:36 PM

Alessandro
I think your only option is 'user exits for credit checks':
LVKMPTZZ
LVKMPFZ1: USER_CREDIT_CHECK1
LVKMPFZ2: USER_CREDIT_CHECK2
LVKMPFZ3: USER_CREDIT_CHECK3
Good luck.

How to exclude one or more than one member on report?

Post Author: izhar
CA Forum: WebIntelligence Reporting
Hi all group members, I am working on BOXI R2. I have to ask that, How to exclude one or more than one member from the report. I know there is function of filter, through which we can see our desired members and other remaining will be excluded, but that's filter. In some of tools i have seen just do right click on a specific member and click on "Exclude" option to exclude the member. Suppose i have placed a Time dimension on the report and standing on "Month Level" which has data from 1, 2, ... 7,8, ... 11, 12 Now i just have to exclude member 7 from the report. Can any member guide me here. Regards, Izhar

Post Author: jsanzone
CA Forum: WebIntelligence Reporting
Izhar,
If you run the report in "modify" mode, then you have two options
1) You can click on the "Show/Hide Filter Pane" button which opens up the "apply filter" pane. From there you go to your Data panel and grab, drag, and drop an item from the Data panel into the apply filter pane and provide a constant or select a value to filter in or out from your report.
2) You can highlight the column of data that you want to filter on, then click on the "Add Quick Filter" button. Using the List of Values menu you either select one or multiple items that you want to include in the report.

How to exclude sales office for combination sales order type/division?

Hi experts,
I would appreciate if you could advise: How to exclude sales office for combination sales order type/division in ECC 6.0 ?

Hi
Standard SAP functionality would not be able to cater to this. Ideally create a Z table with sales order type and sales office combination. Put in entries for combinations that are allowed. In Sales order program MV45AFZZ use the exit USEREXIT_MOVE_FIELD_TO_VBAK. In this exit write down the logic passing the sales office determined and the order type and check if the entry is there or not. If the entry is there then it should go on to the next step. If it does not then pass an error message. You need to use the help of your ABAP er for this.
Thanks
Indranil

How to check weather a material created is active or not

Dear Friends
1 How to check weather a material created is active or not.
2 MIGO standard document has a check button, can we have similar check button in other documents like Purchase requisition.
3 In case of material valuation is Standard (Price control), the costing is done on the basis of the Standard Price or actual cost of the raw material.
I will be thankful for your advice.
Sanjeev

1 How to check weather a material created is active or not.
There is a Blue "i" button for the Material, pls click that it will show you the current status..
2 MIGO standard document has a check button, can we have similar check button in other documents like Purchase requisition.
for PR you can see the check button( CtrlShiftF3) beside personal settings

How to get the unoccupied material number in a number range

How to get the unoccupied material number in a number range.for example, I wang to get a number between 1500000 and 1599990 which is unoccupied as my material number to be created. Is ther any FM or codes?

Dear,
You can get this information from Tcode SNUM or you can access database table NRIV.

How to exclude two kind of files in the same folder in sender cc?

Hi,gurus:
Now we are using "advanced selection for source files" in sender file adapter.
Our requirement is as below:
The source directory is c:\test and there are many files in the directory.
We want to transfer all the files except aa.txt and bb.txt.
We have to implement it in one scenario,but it couldn't work.
It worked only when we transferred all the files except aa.txt or bb.txt,but not work when we want to transfer except aatxt and bb.txt.
I checked the blog "XI/PI: how to exclude files in a sender File adapter?",but it is not the same issue.
Any help will be appreciated.

Hi,
The only way to solve your purpose is
Provide the list of file names like c. d. e. f. whatever possible number of file names in the "File Name Mask" column and provide the directory names by clicking on plus for additional rows. just dont use aa.* and bb. anywhere.This will do your purpose.
Thanks!

How to Exclude a sub directorys from polling using FileAdapter of BPEL Proc

Hi all,
I have a BPEL process with file adapter which is polling to root folder .
I want to exclude File polling for some of the sub folder of the BPEL process.
How to exclude file polling for sub folder i know the option is available for file name not for folder.
Thanks
Phani

dude, you have to give the exact name of the folder you want to poll to,
you can also pass the location of the folder at runtime/dynamically.
In 10 G only single location can be polled by single file adapter
in 11 g we can poll different folders by single file adapter
However I doubt that there can be selective polling to multiple folder.

How to exclude the backup of a drive in vmware mirage server

I want to ask that how to exclude the backup of a drive in vmware mirage server.

I have developed an environment called VDI(Virtual Desktop Infrastructure) in which user is assigned a drive(i.e. D:).When I use to take backup of D: drive then by default with D: drive mirage server use to take backup of C: drive too.That's why i want to exclude the backup of C: drive .Please help me out to solve this.

How to exclude suffix in material

Similar Messages

Maybe you are looking for