How to exclude Virtual PC in TM?

Does anyone know how could I find the VirtualPC volume location on my Mac.
I want to exclude the volume from the TM backup.
Thanks

On both my desktop system and my laptop (PB Ti 1 Ghz) the Virtual PC volume can be found in Documents/Virtual PC List/
Hope this helps.

Similar Messages

How to exclude the backup of a drive in vmware mirage server

I want to ask that how to exclude the backup of a drive in vmware mirage server.

I have developed an environment called VDI(Virtual Desktop Infrastructure) in which user is assigned a drive(i.e. D:).When I use to take backup of D: drive then by default with D: drive mirage server use to take backup of C: drive too.That's why i want to exclude the backup of C: drive .Please help me out to solve this.

How to exclude salary arrears from pension deduction?

I have setup a pension retro element and its calculating the retro amount correctly.
However, its using sum of salary arrears (say,arrears for the month of March and April) and adding that to May salary and deducting pension on the total sum.
(we do not want this, we want only May salary to be considered for pension retro element)
Does anyone know how to exclude salary arrears from pension deduction element? Is there any obvious step, which I am missing in while defining the element?

Hi,
While doing retro for arrears, it will give at a time in one payroll only, no standard for installment payments.
2nd option:
Calculate the Total Arrears amount and divide it by four installments and through IT 0014 with New wage type and give for 4 months as start and end date.
* you have to create a new wage type which is taxable and assigned to IT 0014.
* add this new wt in Remuneration form in Earnings side.
Regards,
Praneeth kumar

How to exclude open items by credit exposure calculation

Dear all,
as anybody idea about how to exclude by the credit exposure calculation some old items (in our case all items having document date lower than 01.10.2005).
These are the basic assumptions:
i cannot use a special G/L indicator because some of them already have one and i cannot change it;
i cannot use the reason code field because it doesn't appear on all items (e.g., negative amount open items, and some others)
some items are positive, some other are negative, some have a special g/l indicator and some others not.
therefore i am forced to change rules of calculation. Is there any user exit o bte?
thanks a lot!
Edited by: Alessandro Casarico on Aug 31, 2010 8:36 PM

Alessandro
I think your only option is 'user exits for credit checks':
LVKMPTZZ
LVKMPFZ1: USER_CREDIT_CHECK1
LVKMPFZ2: USER_CREDIT_CHECK2
LVKMPFZ3: USER_CREDIT_CHECK3
Good luck.

How to exclude stock of a particular storage type from collective availabil

How to exclude stock of a particular storage type from collective availability check in MDVP.

you can set the storage location as 'Storage location stock excluded from MRP' value '1' in the field
Sloc MRP indicator , in MRP view $ when you enter a storage location accessing the material master.
Thsi is the only way to exclude the storage location, you have to do it per each material and also it is excluded from the MRP.
With this option the stock is not considered in ATP.
IF you need the storage location in the MRP, then you should consider the use of MRP Areas.
With the MRP Areas you define which plants/storage locations belong to each MRP area and the ATP is performed for eah area with the stocks that exist in each of them.
Please if the issue is solved set the thread as answered and provide the points to the useful replies.
thanks for your cooperation

How to exclude one or more than one member on report?

Post Author: izhar
CA Forum: WebIntelligence Reporting
Hi all group members, I am working on BOXI R2. I have to ask that, How to exclude one or more than one member from the report. I know there is function of filter, through which we can see our desired members and other remaining will be excluded, but that's filter. In some of tools i have seen just do right click on a specific member and click on "Exclude" option to exclude the member. Suppose i have placed a Time dimension on the report and standing on "Month Level" which has data from 1, 2, ... 7,8, ... 11, 12 Now i just have to exclude member 7 from the report. Can any member guide me here. Regards, Izhar

Post Author: jsanzone
CA Forum: WebIntelligence Reporting
Izhar,
If you run the report in "modify" mode, then you have two options
1) You can click on the "Show/Hide Filter Pane" button which opens up the "apply filter" pane. From there you go to your Data panel and grab, drag, and drop an item from the Data panel into the apply filter pane and provide a constant or select a value to filter in or out from your report.
2) You can highlight the column of data that you want to filter on, then click on the "Add Quick Filter" button. Using the List of Values menu you either select one or multiple items that you want to include in the report.

How to exclude sales office for combination sales order type/division?

Hi experts,
I would appreciate if you could advise: How to exclude sales office for combination sales order type/division in ECC 6.0 ?

Hi
Standard SAP functionality would not be able to cater to this. Ideally create a Z table with sales order type and sales office combination. Put in entries for combinations that are allowed. In Sales order program MV45AFZZ use the exit USEREXIT_MOVE_FIELD_TO_VBAK. In this exit write down the logic passing the sales office determined and the order type and check if the entry is there or not. If the entry is there then it should go on to the next step. If it does not then pass an error message. You need to use the help of your ABAP er for this.
Thanks
Indranil

How to embed virtual tour in adobe muse ?

Hi
How to embed virtual tour in adobe muse like this ?
http://www.artisanerie-embrun.fr
The height / width is responsive.
I have a iframe code but the result isn' the same.
Thank you

You can try this one for specific use :
http://musewidgets.com/collections/all/products/iframe-pro-pack
Thanks,
Sanjit

How to exclude two kind of files in the same folder in sender cc?

Hi,gurus:
Now we are using "advanced selection for source files" in sender file adapter.
Our requirement is as below:
The source directory is c:\test and there are many files in the directory.
We want to transfer all the files except aa.txt and bb.txt.
We have to implement it in one scenario,but it couldn't work.
It worked only when we transferred all the files except aa.txt or bb.txt,but not work when we want to transfer except aatxt and bb.txt.
I checked the blog "XI/PI: how to exclude files in a sender File adapter?",but it is not the same issue.
Any help will be appreciated.

Hi,
The only way to solve your purpose is
Provide the list of file names like c. d. e. f. whatever possible number of file names in the "File Name Mask" column and provide the directory names by clicking on plus for additional rows. just dont use aa.* and bb. anywhere.This will do your purpose.
Thanks!

How to Exclude a sub directorys from polling using FileAdapter of BPEL Proc

Hi all,
I have a BPEL process with file adapter which is polling to root folder .
I want to exclude File polling for some of the sub folder of the BPEL process.
How to exclude file polling for sub folder i know the option is available for file name not for folder.
Thanks
Phani

dude, you have to give the exact name of the folder you want to poll to,
you can also pass the location of the folder at runtime/dynamically.
In 10 G only single location can be polled by single file adapter
in 11 g we can poll different folders by single file adapter
However I doubt that there can be selective polling to multiple folder.

How to exclude synchronous interfaces from component based message alerting

Hi Pi experts,
We are configuiring Alerts in PI 7.3 single stack.If we have 'n'number of interfaces, and if we configured general alerts for all.How to exclude synchronous interfaces in that.Alerting is for asynchronous interfaces only.How to do that.
Please advice on this.
Regards
Suneel

Hello,
>>What are your approaches regarding this requirement in the context of java-only?
I would suggest you to schedule jobs like this:
Customize Alerts Using Job in PI 7.31/PO
>> alerts are consumed according to the given interval and not in "real time" when error occurs, today solution using BADI is "real time" - if possible I would prefer "real time" solution
Check this:
Michal's PI tips: How to trigger an alert for Component Based Message Alerts (CBMA) via "API" ?
>>an separate service determine the actual alert count would be helpful to provide the correct value for maxAlerts, this have to be called beforehand
I haven't tried it but i think u can do that, since these consumers are nothing but JMS queues only so i think there will be a method to read number of alert counts.
>>In history I saw emails generated by the standard alert consumer which only contain details for the first alert, in my case I need details especially the message id for all errorneous messages
If ur max alert parameter is greater than 1 then u should see multiple alert text (along with message id and other details) in ur email message.
Thanks
Amit Srivastava

How to exclude statistic using Data Pump API?

How to exclude all statistics while exporting data using Oracle Data Pump API (DBMS_DATAPUMP package)?

You would call the metadata filter api like this:
dbms_datapump.METADATA_FILTER(
handle = your_handle_here,
name = 'EXCLUDE_PATH_LIST',
value = 'STATISTICS');
Hope this helps.
Dean

How to access virtual folder in oracle apps 11i?

Hi,
how to access virtual folder in oracle apps 11i?
Version=11.5.10.2
please help
Thanks,

I'd use BI Publisher (XML Publisher) Bursting.
Regards,
Gareth
http://garethroberts.blogspot.com
http://www.virtuate.com

How to exclude a set of materials from cycle counting physical inventory

How to exclude a set of materials from cycle counting physical inventory
Details:
Set of material to be uploaded to SAP on say Jan-2011 from another system with cc indicator D:once
in a year and fixed,before uploading into SAP physical inventory will be done .
So we donot want again those materials to fall in the cycle counting in the same year.
So is there a method to exclude these materials from CC counting for the year 2011
or is there some way to upload last inventory count date in SAP system so that it will exclude those
materials?
Any answers will be appreciated.
Thanks
Bijay

HI Antony
Thank you for your reply.
If material count is less than this method is well valid.
IN our case there are 7lakhs materials and having diff cc indicator A,B,C,D...
So it will cumbersome for client to keep track of all those materials when to update cc indicator.
So any other thought? can we upload last count date while updating materials details or similar
Thanks
Bijay

OBIEE 11g How to Exclude/Include Multiple columns on BI Report at Run Time

OBIEE 11g How to Exclude/Include Multiple columns on BI Report at Run Time

Exclude:
you Can exclude columns in either Table view or pivot table view by placing those columns in Excluded section but you will notice that it will appear in bi server parsed sql query.
Not sure you were asking about runtime??
would you please explain your question!!
Thanks
NK
Edited by: DNK on May 8, 2013 9:48 PM

How to exclude Virtual PC in TM?

Similar Messages

Maybe you are looking for