How to Execute 7.0 reports in BI 2004s

Hi Gurus,
Info : BI System Version = 7.0 ; SP level = 10;
          (ii) BI is not connected to any Portal box.
          (iii) I do not have any portal knowledge/background.
   We had built 3.x web reports and they are running fine.
   A decision has been made to migrate all web reports to 7.0.
   Basis is configuring the BI Java & EP stacks currently.
   My question: Once Basis is done then For the execution of 7.0 web reports,
   i) do we need to publish these reports as iviews in Roles    OR
ii) Can they just be executed in a normal fashion as 3.x reports.
   If the answer to qstn is Yes, then is it purely a Portal activity? and how much
   effort does it require?
   Please help as this is a decision question for resource & effort estimation.
Thanks
Vishno.

In terms of one word answer -YES you can do it.
Publishing 1:
SAP NetWeaver 2004s BI - Define your Publishing Strategy Part 1
Publishing 2:
SAP NetWeaver 2004s BI - Define your Publishing Strategy Part 2
Web Applications
http://help.sap.com/saphelp_nw2004s/helpdata/en/05/4b583cf7388362e10000000a114084/frameset.htm
Web Analyzer
http://help.sap.com/saphelp_nw2004s/helpdata/en/0d/af12403dbedd5fe10000000a155106/frameset.htm
Hope it Helps
Chetan
@CP..

Similar Messages

How to execute BW-Bex reports from SRM

Hi
Anyone know if there is an easy way of execute BW Bex reports directly from the SRM interface? Or is the easiest way to have the users start the Analyzer seperatly.
We are running:
SRM 4.0 (webb interface)
BW 3.5
Thanks and regards
Pontus

Hi
Thanks for your reply.
I can run that TC from the BW but not from SRM. It just says that TC does not exist in SRM.
Best Regards
Pontus

How to execute fast a report using an Oracle Repors6i?

Hi guys,
Im doing a report using an Oracle Reports6i, I encountered a problem regarding
the TABLE. Everytime i run the report it takes 1 hour to display the report.
The problem was the TABLE im using has a large volume of data. What im going to
do with this TABLE with lots of data.
Can anyone help me execute my report faster.
Thank you.
Lala

user528488 wrote:
Hi guys,
Im doing a report using an Oracle Reports6i, I encountered a problem regarding
the TABLE. Everytime i run the report it takes 1 hour to display the report.
The problem was the TABLE im using has a large volume of data. What im going to
do with this TABLE with lots of data.
Can anyone help me execute my report faster.
Thank you.
LalaUse a very restrictive WHERE clause on "the TABLE".
Or, undertake some performance tuning (utilizing the previously posted links to provide proper information).

How to delete pages in Report layout

Hi,
I am getting problem in deletting pages in lay out.
actually i am having report of 6 pages in lay out.since i merged 2 and first.so second page is blank.and i dont want to disturb other pages.so please can any one help me deleting only second page.
I am Thankfull you to.
Thanks in advance
Shashi

Ok. i figured out that I can provide a special parameter named 'BLANKPAGES' to the rwbuilder program or rwclient, etc... But I still don't like it because I have to modify how I execute and print reports...why should I have to do that when the report itself should have that ability? If I create a new report, it doesn't need the BLANKPAGES parameter, it just prints one page...why can't i modify my existings reports then?
anyone got ideas??? Thanks!

How to execute the Portal Activity Report

Hello,
In the System Administration -> System Configuration-> Service Configuration Editor
Under Applications->com.sap.portal.activityreport.core-> Services->ActivityReport and I have configured the report.
I saved I have restarted the service to effect the changes and in Portal Catalog
Application->com.sap.portal.activityreport.core and I have administrated the changes. The Application Details Editor is displayed.
I have clicked the Restart the portal also.
I would like to know how to execute this Portal Activity Report after making this configuration.
Can anyone help me.
Thnx in advance
cheers
Kris

Hi Kris,
here an example with steps:
1. Navigate to Content Administration -> Portal Content
2. Step into a test folder and right click on the folder to create a new iView
2. Select the template "Portal Activity Report iView"
   Name: Daily User Logins
   Technical Name: DailyUserLogins
3. Open the newly created iView and define the following parameters
   under "Specify report content"
      Start of Reporting: Date 01.01.2005 and Time: 08:00
      End of Reporting: Date 31.12.2005 and Time: 24:00
      Time Unit for Reporting: Daily
   under "Configure report options"
      Information to Report: Number of users logged on
You have created a new reporting iView, aggregating information about the number of anonymous and authenticated users on a daily basis.
Hope this helps,
Robert

Kindly send anybody a ppt on how to execute reports through Browser and Ana

Hi all,
I need a PPT on how to execute reports through Browser and Analyzer in version 3.5 or older to 3.5 immediatley from end user point of view. I donot have time to prepare it and has to be sumbmitted before end of the day.
Kindly help me out by sending it [email protected] .
Thanks in Advance.
Anil Kumar Sharma .P

Thank you Mr. Voodi,
I will wait for your reply.
Meanwhile could anybody else ,send me PPT on it.
Thanks in Advance,
Anil Kumar
Message was edited by:
Anil Kumar Sharma

How to group all the reports and execute like single application ?

Hi,
I am trying to develop some reports in Crystal Reports XIR2 , here i have Design and Preview options that is for every report i should see , how to group all the reports and execute like single application?
any option is there to run the report
i mean is it possible to have a home page from there have links to each report and when i click on the link corresponding report should be shown , if it is possible , How?
Regards,
kathyaini

You will want to look into Crystal Reports Server, it does exactly what you describe and more:
http://www.businessobjects.com/product/catalog/crystalreports_server/
Download a trial of CR Server here:
http://www.businessobjects.com/product/freetrials.asp

How do I execute a ssrs report rdlc file from c# winforms.

Hello
I am new to c#
How do I execute a ssrs report rdlc file from c# winforms.
I have a rdl file which i have converted to rdlc and "added" to my win form
when I try to run the report I dont get the output
Please help me with a sample code
regards
Manoj Gokhale

Hi Manoj,
According to your description, you want to display RDLC file using WinForms ReportViewer control.
In your scenario, you can add a ReportViewer control to a Windows application, then select a report that is part of the existing project. For more information, please refer to this article:
Using the WinForms ReportViewer Control.
If you have any question, please feel free to ask.
Best regards,
Qiuyun Yu
Qiuyun Yu
TechNet Community Support

In Report How To Execute Query Two Times in One Layout

hi
All
In My Report i have creating on main Query and then query run two type with Defrent Parameter how is possible in Oracle Report 6i
example
my Query is
For Example First time query run defrent parameter and again run some other parameter in same layout help me
select decode(art_mkt,'1',art_brc,art_mkt) art_mkt,
&f1 art_prd,
sum(nvl(art_amt,0)) art_amt,
sum(nvl(art_net,0)) art_net,
nvl(substr(art_vou_ser,2,1),' ') art_mfg_type,
nvl(substr(art_vou_ser,3,1),' ') art_src_code
from art
where art_rec_ty = 58
and art_ml in (:art_ml1,:art_ml2)
and art_dt between to_date(:start_dt,'dd-mm-yyyy')
and to_date(:end_dt,'dd-mm-yyyy')
and art_vou_dt between to_date(:dt1,'dd-mm-yyyy')
and to_date(:dt2,'dd-mm-yyyy')
group by decode(art_mkt,'1',art_brc,art_mkt),
substr(art_vou_ser,2,1),
substr(art_vou_ser,3,1),
&g1
order by decode(art_mkt,'1',art_brc,art_mkt),
substr(art_vou_ser,2,1),
substr(art_vou_ser,3,1),
&g1

That would be a great question in the [url http://forums.oracle.com/forums/forum.jspa?forumID=84]Reports Forum wouldn't it ;)
Tony

How to execute report RLBEST00

Hi All,
Can anyone please help me to execute the standard report RLBEST00. It is very urgent....
Thanks in advance.
Regards,
Akanksha

Dear Akansha,
Go to T-Code SE38. In the program type in RLBEST00. Press F8. This will ask for certain detials.Fill in the details and again press F8.
Hope this helps you.
Do award points if you found them useful.
Regards,
Rakesh

From 6i to 10g "How to run a 10g report from OEM scheduler"

We recently converted all of our 6i form and reports to 10g. We had forms and reports running as batch processes.
Now that we are using 10g it is understood that we cannot run the forms as we did in 6i using OEM scheduler, so they were converted to scripts.
Our problem still remains, How do we run 10g reports as batch processes?
Can we use OEM scheduler?
Is there a better product to accomplish this task?
...

Hello,
How do you execute your Reports ?
Do you execute it from the Builder ?
If you execute it from the Builder, do you use Run Web Layout or Run Paper Layout ?
(If you have upgraded a Reports From 6i, there is no web layout , so you have to use the Run paper Layout
The web layout is something new that appeared in Reports 9.0.2)
Regard

How can we put the report which is generated by the program into spool??

How can we put the report which is generated by the program into spool??
I had generated a file in Unix which had the report but now the requirement has changed.
Regards,
Shashank.

Hi Shashank,
If the program is executed in the background and it has the write statement then the spool will automatically generated.
Reward points if useful.
Regards,
Atish

How To Run a Parameterized Report Stored in Crystal Enterprise on demand

I have been integrating into Crystal Enterprise 10 for many years now with no problem. We use .net to schedule and run reports as well some administration tasks. Users can view reports through our asp.net web application using the crystal viewers.
However, I now have a task that requires us to run a report that is stored in CE on demand. This can NOT be done through the viewer because it will not have direct user interaction. The crystal report has to be bundled with other documents and then displayed to the user in a single PDF. I have everything working right now if the report has already been scheduled and ran through CE.
What I can't figure out to do is how to actually run the report in CE on demand and immediately get the results back. I can't schedule it (even for immediate running) because I can't have it backed up in the job server queue. If the report was local on the machine that Integerate with CE, I think it is as simple as loading document, setting parameters, and calling refresh. However, I need this to happen in CE with the RAS or PageServer server. In other words, the execution of the report needs to occur on server and I need the end results.
I have scoured the Net looking for an example but everything either talks about scheduling through Job server or on demand through the viewer.
Hopefully someone can help.

Thanks for the answer Elaine, but I am still not quite there.
We already had interactive on-demand report viewing working through our web app.
The problem is that I need non-interactive on-deman report running. Let me explain the process a little more to help paint the picture of the process we have.
1. While working in our application, the user selects an "information dump" on the selected the employee. This dump is information from a number of different places and document types.
2. The application then goes to each of these different information areas and converts the information to PDF format.
3. Application stitches all the individual PDF files into a single PDF which is what is returned to the user via the web application. The delivery mechanism cannot change due to requirement limitations.
Currently, the information is coming from multiple MS Word mailmerge documents merged "on-the-fly" with data for the employee and a stored HTML worksheet that is also converted to PDF.
We now have to add a PDF version of 2 reports that are ran when the user requests the information dump.
I already have the code to connect to CE and get a reference to the RASReportFactory. We do this today using the interactive viewer. However, we use the viewer to display reports that have already been scheduled and ran. This means we simply make a call to RASReportFactory.OpenReportSource to get the source for the viewer.
We now can't have a viewer in this process. I found the call to the method OpenDocument on RASReportFactory to get a handle to a ReportClientDocument.
I know how to properly set the values for the report arguments as well as the database information.
What I don't see is a method to tell it to run the report. I see Save and SaveAs but this simply saves the document by to CE or to a local file with the changes I made to parms and db info.
What do I call to tell it to execute the report so I can turn around and export it to PDF? Thats the million dollar question.
Edited by: Stephen Barrett on Aug 20, 2008 12:11 AM

Exception CX_SY_RANGE_OUT_OF_BOUNDS raised while executing a Web Report

Hi Gurus,
When I executed a Web Report, I got the following Exception
CX_SY_RANGE_OUT_OF_BOUNDS
when it is filtered for September month report is working fine, but when filtered for October month got the following message
Messages:
An exception with the type CX_SY_RANGE_OUT_OF_BOUNDS occurred, but was neither handled locally, nor declared in a RAISING
Part-field access (offset = 4, length = 2) to a data object of the size 3 exceeds valid boundaries.
Could anyone please tell me how to solve this issue.
Thanks in advance.
Madhusudhan

Good afternoon,
The following SAP Notes may be helpful for you ...
1240222   Filter value from compound characteristic is not displayed
1266170   Exception CX_SY_RANGE_OUT_OF_BOUNDS
1100955   RS_EXCEPTION000 in parallel query execution
Regards,
Karen

How to Enhance the Standard Report?

Hi All,
How to Enhance the Standard Report? :
When I am trying to execute the query called ZTIMES in the user group SQ01 it is navigating the screen to selection-screen with some inputs to be given here on the selection screen company code is mandatory as an input. The company code field is having the search help and it is fetching the values for the company code from table called PROJ Table (Project definition Table).But I want the company code should fetch the value from the PRPS Table ( Work break structure(WBS Element) Level).
Tables used are PROJ and PRPS.
The company code in PROJ is PROJ-VBUKR
In PRPS is PRPS-PBUKR
In the coding part related to that selection screen I have to replace PROJ-VBUKR with
PRPS-PBUKR.But it is standard report to enhance.
What is suggestible solution for this issue?
Thanks,
M Raju

Hi,
Since this is an ABAP Query, You can change the infoset query in SQ02 and establish the join linkages between PROJ and PRPS
Also on the selection screen of the Query make sure you provide company code from PRPS table and report output also from the same table reference.
Once you have modified the ABAP Query, activate and generate it so that it will internally regenerate the a standard program.
http://help.sap.com/erp2005_ehp_02/helpdata/en/d2/cb4256455611d189710000e8322d00/frameset.htm
ABAP Query (Sq01)Modification
Hope this helps
Regards,
Shiva

How to Execute 7.0 reports in BI 2004s

Similar Messages

Maybe you are looking for