How to execute automatic Workflow customizing settings in swu3 transaction

Hi Folks,
We are trying to execute automatic Workflow customizing settings in swu3 transaction.My basis team has done all settings except maintain prefix numbers" and "check entries from HR control tables.Basis team is asking us to do these settings(either functional/abaper). When I am trying to execute check entries from HR control tables am getting an error.Please find attached screenshot of the same.
Maintain Prefix numbers settings is maintained but still it is showing red.
Please suggest how should I be doing this.
Regards
Jaya

Hi Jaya,
Maintain Prefix Number -  As far as my knowledge concerned Prefix number is required to create the Org determination rule. Org. determination rule contains the eight digits, in which first 3 digits come from the prefix number.
1. Use the T-Code SWU3
2. Go to Maintain Definition Environment
3. Click on Maintain Prefix number and click f8 (execute).
4. Create new entry with
     a) three digit prefix number (unique)
     b) Sap system
     c) Client
     d) Package
I hope this will help you. Kindly attach the screen shot of the error.
Regards,
Dinesh.

Similar Messages

  • Error while executing Automatic Workflow Customizing

    Hi!!!!!!
    In ECC6.0, i need to activate all the workflows in SWU3 (Automatic Workflow Customizing), but i was able to activate only some of the steps, remaining is still in red mark. While executing "Schedule Background Job for Missed Deadlines", it is giving error as "Object with runtime number '                                                0' not defined". So please let me know how to resolve this issue.
    Regards,
    Ranjith

    Hi Kumar,
    Please check with the link Work item xxxxx: Object BKPF method Zxxx cannot be executed. for the resolution.
    With Regards,
    Krishna.

  • Urgent: Issue in Automatic workflow Customizing.

    hi,
    Can someone please help me with this issue in Automatic workflow customizing ( SWU3)
    When I try to execute the step
    Maintain Runtime Environment > Schedule Background Jobs with missed deadlines
    I get the error message saying
    "Output Device "" not known"
    Can someone help me how to resolve this? This is very urgent for me.
    Regards,
    Sam K

    The guidelines tell you not use the word urgent in your message title, so please don't. Personally I  try to not answer such questions until at least one day has passed, giving you some time to cool off and perhaps solve the problem on your own.
    I can't recall seing this message myself, but my guess is that either your user or the user WF-BATCH (if the job is being scheduled with that user) has a default printer (output device) that is not defined in the system.

  • Automatic workflow customizing SWF_XI_CUSTOMIZING

    Hi Friends,
    I am getting issues with "Automatic workflow customizing - SWF_XI_CUSTOMIZING". Can you all please look into this? The problem is
    I entered the transaction "SWF_XI_CUSTOMIZING". There i can see that all are not GREEN.
    Under "Maintain Runtime Environment", i have following items RED:
    1. Schedule Background Job for Missed Deadlines.
    2. Schedule Background Job for Work Items with Errors.
    Under Maintain Definition Environment, following item is RED:
    1. Check Entries from HR Control Tables
    Everything else are GREEN. Can you please let me know why the above are RED and How to make it GREEN?
    I have implemented FILE TO IDOC scenarion using BPM and getting a error of 99 in SXI_CACHE. Is this problem is because of the above are RED?
    Thanks
    Chris

    This is for custom workflows...etc..done as part of the post Installation of XI...
    http://help.sap.com/saphelp_nw2004s/helpdata/en/a0/28e937a5caba6ee10000009b38f842/content.htm
    This is a tutorial on that..if that helps, though your issue is not related to that
    http://help.sap.com/saphelp_nw2004s/helpdata/en/fb/135962457311d189440000e829fbbd/content.htm
    Regards
    Ravi Raman

  • Problems with Automatic Workflow Customizing

    Hi!
    I am having problems with Automatic Workflow Customizing (SWU3). I am trying to execute "Configure RFC Destination" manually. I receive the message "Synchronization of passwords failed".
    We are using CUA and it is therefor not possible to create the user from SWU3 which means that WF-BATCH has been created in CUA with a pw which is then filled in by me when executing "Configure RFC Destination".
    WF-BATCH has authorization SAP_NEW, SAP_ALL
    My user also has SAP_NEW and SAP_ALL and usergroup SUPER.
    Does anyone know what might be the problem?
    Sincerley
    Anders Öhrling

    Hello Anders,
    Check if the user is locked in SU01. Then check if your user has been created in CUA.
    It is recommended to delete WF_BATCH. The system will auto create the user ID WF-BATCH and synchronize the password.
    Do let me know if your problem is resolved.
    Thank you.
    Regards,
    Manomeet
    - Award points if helpful -

  • SWU3 - Automatic workflow customizing

    Hi All,
    We have a situation where all users are receiving error messages in their SBWP inbox. most of them are related to error processing with IDoc. the user inboxes are flooded with error message and they are not able to open their SBWP.
    It seems that in SWU3 - automatic workflow customizing setting "Idoc interface" is active.
    Path : SWU3 > "Classify Task as General" > IDoc Interface (checked).
    We need to deactivate this Idoc interface but we are not able to do the same. Can some one let us know how to do this.
    Also if there is some other cause of this problem then please let us know. Currently we are purging the error workitems but they keep on generating in the background.
    Please help.
    Regards,
    Rohit

    Hi,
    We need to deactivate this Idoc interface but we are not able to do the same. Can some one let us know how to do this.
    For this purpose you need to contact BASIS team to deactivate this.
    Alternate solution :
    Get the task id of that workitem. Open it through tcode PFTC and make the task attribute form to "General Task" to "Forwarding not allowed".
    Run PFCT
    Enter tour Task id ( eg. TS00008068 , please remove leading TS )
    Addition data >>> Agent assignment >>> Maintain >>> Attributes
    Form the next run of the workflow workitem will not reach to SBWP.
    For the workitems you need to delete mannualy or forward it to a idle user.
    Thanks and regards,
    SNJY

  • Automatic Workflow Customizing needs to be undone

    Hello all,
    I am embarrased to report that I have caused problems in our production system by doing automatic workflow customizing using transaction SWU3.  We are on ECC5.0 and do use workflow on a limited basis.  We were planning to make more use of it, which is why I was looking at it.  I was looking at SAP note 332149.
    How can I reverse the damage I've caused?  SBWP inboxes are full on workflow items - 900,000 items in one.  Short dumps are occurring with alarming frequency.
    Thanks for any help anyone can provide.
    Regards,
    Paul

    My  question has not been answered, but the problem has been curtailed.
    What I eventually was able to find out, what that after doing the automatic workflow configuration, workflow went and acted upon all the old "Status 29" idocs in our system.  I had to run report SWWDHEX to delete all these idocs.  Once deleted, all inboxes returned to normal.
    Paul

  • How to execute a workflow from a webdynpro application???

    hi friends....
    How to execute a workflow from a webdynpro application???
    we are using ep6, ecc5????

    If you want to start a workflow in the backend, you need to call a RFC that starts it.

  • ERROR in SWU3 - Automatic Workflow Customizing

    Dear Experts,
    I am geeting error in SWU3 - Automatic Workflow Customizing in 1st step.
    1st step - Maintain Runtime Enviornment does not become green due to error in element " Schedule Background Job for Deadline Monitoring "
    The error message is " Error within method CL_SWF_ADM_JOB_FACTORY=>GET_INSTANCE->"
    Kindly throw some light on this.
    Regards,
    Shantkumar

    Hi,
    Refer this [Link1|https://wiki.sdn.sap.com/wiki/x/fQDDAw] [Link2|https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/10bcbd65-64ea-2a10-9a8d-b653b8e0843c] [Link3|https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/20f4843e-314f-2a10-2a88-8c4afa20dda6] [Link4|https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/303617cf-73dd-2a10-c993-cc6303585176].
    Regards,
    Surjith

  • Automatic Workflow Customizing

    HI!
    I am doing configurations in BI-system for the purpose to create connection between BI-system and SAP source system. According to documentation I must "Perform automatic workflow customizing". May I omit this?
    Thanks,
    Olga

    hi,
    condition evaluation job, searches for forks in workitems and logically deletes branches which are no longer needed. Suppose you have a fork, 1 out of 2, at the momen of creation 2 workitems are created, if one of these are met, the second one still exists, untill the conditon job runs it then logically deletes the not needed branch.
    event queue, is something like workload balancing (see also tr SWEQADM) basically it consists of 2 parts, the interval and the number of events. suppose the interval is every 5 minutes and the number of events is 100. Suppose at one time 1000 events are fired, if the event queue was not set, the system would handle all of these events this has a high impact on a productive environment, with the event queue, the events are handled in bundles of 100 every 5 minutes.
    Kind regards, Rob Dielemans

  • Undoing automatic workflow customizing swu3

    Hi *,
    I did an automatic workflow customizing with transaction SWU3 on SAP R/3 System. Is it possible to undo the workflow customizing automatically?
    BR, Rene.

    Hello Rene,
    No, but I'm curious to know why you would want to do this?
    Undoing the customising is not difficult. If you want to prevent anything workflow related from running, just disable the RFC destination WORKFLOW_LOCAL_<client>. You can also unschedule all the jobs such as deadline monitoring etc from the workflow transaction menu.
    Cheers,
    Mike

  • Problem in automatic workflow customizing. SWU3

    Hi All,
    I run the transaction SWU3 and Executed the automatic workflow customization for maintain runtime environment i am getting the below error like RFC USER HAS WRONG PASSWORDS, SYNCHORONIZE PASSWORDS WITH YES OR NO pop up.
    When i click yes i am getting a message like synchronization of passwords fails.
    Can any one give me some idea how to get it done.
    Thanks,
    Joe.

    Check this Workflow_Local_300 rfc destination and check with wf-batch user .
    Regards,
    Gurprit Bhatia

  • How do I automate a custom component not implementing UIComponent?

    I have tried using Adobe's instructions for automating custom components by creating a delegate class to use as a mixin, but
    1)  the super() statement in the delegate of the constructor is not recognized by the compiler,
    2) I am not able to use a DisplayObject as an argument to init(),
    3) I am not able to return the custom component as a IAutomationObject from the parent component's getAutomationChildAt method.
    Is it simply not possible to automate a custom component not implementing UIComponent?

    If you look in the library panel, there should be an entry for your custom component - probably something like CustomComponent1.mxml. Drag this out onto the artboard to create a new instance of the component.
    In the case of a custom component, you can't change much on the second instance. If you have something like a text input skin though, you can change the text it is displaying for each instance.
    We are working on making this sort of thing easier in the future, so stay tuned

  • Automatic workflow customizing :Schedule background job for condition evalu

    Hai,
    I have one problem in automatic customizing SWU3(Maintain runtime environment)-Schedule background job for condition evaluation.
    How to turn  green tick from red cross? All other steps are OK in SWU3 except this problem.
    Please give me some tips.
    -Jaheer
    _______Thanks in terms of BIG points_______________________

    Hi Jaheer
    If the only red cross is next to the condition evaluation job, I suppose you could just schedule up the job automatically in SM36. Just be sure that the RFC Destination is correctly configured.
    The program that you need to schedule is <b>RSWWCOND</b>. The SAP default is to call the job SWWCOND and schedule it to run every 30min. That should get rid of the red cross. And if not, you might find along the way why the Auto-Customising didn't work.
    Cheers
    Lyal

  • How to execute Oracle Workflow Post Notification Function

    Hello All,
    I have  a requirement where I have to approve Expense Reports through a program rather than from notification. For the same I am using below:
    wf_engine.completeactivityinternalname(itemtype=>'APEXP'
                               ,itemkey=>'4634686'
                               ,activity=>'APPROVAL_REQUEST'
                               ,result=>'APPROVE');
    Now, after executing above procedure I can see that notification is approved but my workflow has not proceed to next node as I think that the function associated with notification has not executed.
    Kindly help me on this that how can I approve my expense report and move the workflow to forward so that other functions will execute.
    Many Thanks! in advance
    Sandy

    Thanks! for your reply.
    I am using this API outside the workflow.I am using this API for iExpense to approve an Expense Report. In Expenses Workflow below are the processes:
    1. AP_MANAGER_APPROVALPROCESS whihc is using NON_AME_APPROVAL_PROCESS and this is using REQUEST_APPROVAL_PROCESS and under this process there is a notification APPROVAL_REQUES. Now, I am completing this ACTIVITY as Approve and I am able to do that but problem is that REQUEST_APPROVAL__PROCESS is itself not getting completed and stuck here.
    Please let me know how can I achieve that.
    Thansks!
    Sandy

Maybe you are looking for

  • Problems with Premier Elements 7 Opening Earlier Projects

    I have used Premier Elements 3 to create many 15-60 minute videos, most built from Photoshop Elements slide shows imported into Premier, and most with DVD output designed. After installing Version 7, I attempted to open these projects which it is sup

  • SINGLETRANSACTION=1 / WEBGUI=1 parameters & CAT2 service

    Hello!! I have the following configuration: ~WEBGUI     =1 ~RECORD=1 ~SINGLETRANSACTION=1 ~TRANSACTION=CAT2 ~NOHEADEROKCODE=1 ~WEBGUI_THEME=sl ~THEME=sl ~WEBGUI_ICON_TOOLBAR=2 ~WEBGUI_SIMPLE_TOOLBAR=40 It's ok, but I have a BIG problem with the ~SING

  • Emac & Ibook

    I have both of the above computers. I would like to be able to use them in conjunction with each other. Right now if I want to change one to the other, I must disconnect the ethernet cable and reset my modem, connect the ethernet cable to the other c

  • How do I get  key from Apple to download Mac office?

    How do I get a key from Apple to download Mac Office?  I have a CD for 2008 but not a drive to load it. Do I get free upgrades or do I need to purchase them?

  • Jsf dataTable sort

    Hi all, How can the contents of dataTable component be sorted, tomahawk dataTable component provides a commandSortHeader how to use this, can any one show an example on how to write the sort handler ? Thanks in advance