How to execute eCATT's from Solution Manager
Hey Everyone,
am using solution manager version 3.1,WAS 620.
and eCATT SAPGUI 640.all my recording are done with SAPGUI recording in Development System.and i execute via TestPlan STWB_2.
Now,my question is,How to execute all these eCATT scripts from Solution Manager.Do i need to transport the whole repository of eCATT from development system to Solution Manager?.
I appreciate if you guys pass some comments on this issue.
Thanks in Advance,
sarapu
Do i need to give target system to development system from solution manager?
can i give the same system data container in solution manager while creating testplan..
in prior do i need to create a testcatalog STWB_1 in order to create TestPlan?
please pass your comments,
Thanks,
sarapu
Similar Messages
-
How to download support packs from solution manager
Hi Experts ,
Please tel me the process for down loading support packages from solution manager.iam very new to this process
How can get an approval in solution manager to down load support packages in step by step process
RegardsPlease check: http://service.sap.com/solutionmanager -> SAP Solution Manager in Detail -> Maintenance Optimizer -> Links and Downloads.
Kind regards,
Mark -
How to find ECC users from solution manager
All,
I want to know is it possible to get the list of ECC users from different clients and environments within Solution manager. Also how can I see from solution manager what are the ECC clients it had connections with.
ThanksHi,
try the report AI_SDK_USER_BP_GEN within Solman. You can check the users of all connected systems there and additionally generate business partners for them.
To get an overwiev over the system landscape try transaction SMSY.
Best regards,
Martin -
How to remove Production System from Solution manager.
Hi All,
We have Three system landscape and solution manager installed.
All the system are managed by Solution manager.
here we are looking to remove the Production System from Solution manager.
as in case if is there any problem in solution manager then we are not dependent on it.
things will work directly on Production system.
Could you please let us know the procedure to remove the system from solution manager.
Please let us know if is there any document provided by SAP.Hi,
Have you implemented charm,ccms monitoring or any other functionalities?
if yes,.Delete the sytem from tms domain. and TR route needs to be adjusted, if you are using ccms, remove the agent details from RZ21 also.
Does your production system data coming from SLD?
if yes, Delete the entry from SLD
if both the answer is no.
1.delete RFC from SOLMAN to the production systems.
2. delete the production system using SMT2 transaction.
3. Remove system rom SMSY from SOLMAN.
Thanks,
Jansi -
How to obtain a Question and Answer DB from Solution manager.
Dear Gurus,
How to obtain a Question and Answer DB from Solution manager for HCM.
Regards,
Rajasekar.http://saphrexpert.blogspot.com/2008/12/questionairre-to-be-used-during.html
Check this link
this is not the answer to your question but it will helpful -
How to monitor system from SOLUTION MANAGER?
Hi,
How do I monitor systems and send alerts from solution manager?
Thanks,Hi Afi C
There are two types of monitoring in Solution Manager.
1. System Monitoring.
2. Business Process Monitoring.
1st one monitor system performance and 2nd one monitor specific jobs or transactions related to important business step based on the configuration.
If you have access to the service market place, you can some information related to above topics.
1. Quick link monitoring. www.service.sap.com/monitoring
==>Media library
2. Quick link BPM. www.service.sap.com/bpm
==>Media library (Under the technical information, Setup guide business process
monitoring is goods one !). Same as business process monitoring, you can
setup system monitoring from t-cd DSWP.
Best Regards
Keiji -
How to check the messages in solution manager?
hai experts !
how to check the messages in solution manager?
in which transaction do we see them?Hi Kiran,
From what I gather from your brief question, you are perhaps looking for CRM_DNO_MONITOR that would display all queries created from Satellite/SolMan system itself, as support messages.
If you are looking for Notifications underlying those messages, please look for DNOTIFWL.
For more specific answers, please provide more description of what you are looking for.
Trust this helps.
Regards,
Srini -
ECATT integration with solution Manager
Hello Colleagues,
Please let me know if any of you have worked on integration between Solution Manager and eCATT.
I have the scripts in eCATT system now i need to run these scripts from Solution Manager system in the target system.
Any info would be of great help.
Thanks,
AjayHello Ajay,
Have you seen these links?
http://help.sap.com/saphelp_sm70ehp1_sp23/helpdata/en/7e/8186fa137998448de956476b8cecdc/frameset.htm
http://help.sap.com/saphelp_sm70ehp1_sp23/helpdata/en/de/50e848f5f311d5997000508b6b8b11/frameset.htm
http://help.sap.com/saphelp_sm70ehp1_sp23/helpdata/en/48/e151fddb163184e10000000a421937/frameset.htm
http://help.sap.com/saphelp_sm70ehp1_sp23/helpdata/en/59/f49e6fe97711d5995d00508b5d5211/frameset.htm
http://help.sap.com/saphelp_sm70ehp1_sp23/helpdata/en/cb/cb3a3e5069eb6ce10000000a114084/frameset.htm
These links are from the Solution Manager Help Library, so the information is specific to Solution Manager for eCATT
Regards,
Paul -
Renew and Download maintainance certificate from solution manager
Hi Friends,
I am looking to renew and download maintenance certificate for MANAGED SYSTEM from Solution Manager (7.1) SP12.
Can you guys guide me on this how do I proceed.
Thanks & Regards,
Solman StarterHi
Please check
https://websmp204.sap-ag.de/~sapidb/011000358700000574752008
and
https://websmp204.sap-ag.de/~form/sapnet?_SCENARIO=01100035870000000202&_SHORTKEY=01100035870000716020&_OBJECT=011000358700000138222008E
check out FAQ abt maintenace certificate:
https://websmp204.sap-ag.de/~sapidb/011000358700000325262008E#6
The SAP Solution Manager triggers the generation of a valid maintenance certificate in SAP Support Portal, download it locally in SolMan system and manages the distribution to the managed system.
See detailed documentation http://help.sap.com/saphelp_sm71_sp01/helpdata/en/89/a7c08d740c4cffb491f98801f17d30
Thanks
Vikram -
Customizing Documentation from Solution Manager
Morning,
We made project customizing via Solution Manager, and our customer would like to have a report or customizing documentation from SM. How to generate this document via Solution Manager
Thank You in advance
DPHello D;
As mentioned in the previous answer - SOLAR02 is where you can generate the Configuration Guide (SOLAR01 to generage the BluePrint).
My box is down right now - so I'll to respond from memory. In Solar02, you simply click the matchcode within either the scenario or step. Then a dialog box will appear with various processes or industry solutions. You select the ones you need, and those will automatically generate the Scenario/Steps/etc.-> as well provide the config objects and other related transactions. Some have a bonus of further documentation as well. Once the "business repository" is updated, then you can select the top left menu path (sorry, don't know the name), and then select the Generate Configuration Guide.
Follow through the messages -> and once the Word document is display (it will be blank) -> Run the Macro (with all capital letters).
This will take a moment to generate the document.
I hope this helps - it's purely from memory. Once my system is back up - I'll see if you still need assistance and I can guide you better.
Best of luck,
Gina -
Doubt on viewing service message reply from solution manager???
Hi,
How to view the reply(for Service Message) from solution manager in our satillite system? or how to view the reply for our service message? Please share your ideas..Hello Sriram,
Unfortunately it is not possible to display the replies of the support
desk in any satellite system. There are to ways to inform the creator
the message:
A new action can be defined, so that a mail is sent to the creator, when
e.g. the status of the message changes. You can read in attached note
no. 691303 how to set up an action triggered by status change.
The second possibility is to set up a user in the Solution Manager
system with display authorization, then creator of the message must log
on to the Solution Manager system and can then have his messages
displayed.
At the moment there are no other possibilities for the issue described
by you.
Hope this helps,
Dolores -
Configure EP to display contents from Solution Manager
Hello,
How to Configure EP to display contents from Solution Manager? I want to access Solution Monitoring through Portal, how to do this?
I will appreciate if someone can help me,
Waiting for reply,
Regards
SharmishthaHello Lee
I want to display solution monitoring on portal. I will access the portal instead of solution manager to view CCMS alerts.
I have configured ccms in solution manager which is my central system, so now i want to display these contents on portal.
is there any way i can do this task. I have solman 4.0 with SP15. I use work center for this configuration.
Will appreciate if you can direct me the right way.
Thank you
Regards
Sharmishtha -
Monitor Systems From Solution Manager 4.0
Hi Dear Gurus,
I have recently Instaled SOLMAN 4.0 on windows with Mysql. I have configured the Maintainence optimizer and now its working fiine.
From my organization requirement they want to monitor ERP and BW systems from solution manager.
Can any one please tell me how to start regarding this.
And one more question is i am just wondering Central User Admin is different installation or we have to configure SOLMAN 4.0 to use CUA.
Many thanks for your time.
Kind Regards,
Vamsi.Hi,
You first need to Setup landscape and create RFCs
[Data Collection|https://websmp109.sap-ag.de/~sapidb/011000358700004860052004E.sim]
[Create Systems|https://websmp109.sap-ag.de/~sapidb/011000358700000894082006E.sim]
[Create RFCs|https://websmp109.sap-ag.de/~sapidb/011000358700002912202006E.sim]
[Assign Logical Components|https://websmp109.sap-ag.de/~sapidb/011000358700002912242006E.sim]
Then Create Solution,
Then Setup Solution Monitoring
[Setup|https://websmp109.sap-ag.de/~sapidb/011000358700006936062005E.sim]
[Monitoring Graphic|https://websmp109.sap-ag.de/~sapidb/011000358700006939872005E.sim]
[Exhaustive very good tutor|https://websmp109.sap-ag.de/~sapidb/011000358700005479192006E.sim]
This will solve your problem.
Feel free to revert back.
--Ragu
Edited by: Raguraman C on Jan 16, 2008 4:31 AM -
Hi all,
I want to download in excel file BPML from solution manager, kindly guide me the process, can we do that from solution manager or is there any other similar thing to BPML that we can get from Solution manager.
Thanksthere isn't a true BPML in SolMan.
The closest thing you can get to it, which better in my opinion, is:
1. Go to SOLAR_EVAL
2. Under configuration select the Cross Tab analysis report
3. Select the various reports you wish to merge (I recommend transactions, config, development and testing if you have used those tabs)
4. Click execute
5. Export it to Excel
6. Enjoy!
regards,
Jason -
How to execute sql scripts from Powershell across multiple databases
Re: How to execute sql scripts from Powershell across multiple databases
I have an tsql script that I want to run across a list of databases. How is the best way to do this in Powershell? Thanks.My example below, using just the SMO and not breaking up the batches, the ExecuteWithResults give the following error when the .sql file contains a GO. My script files are as simple as a DECLARE and then a GO.
WARNING: SQL Script Failed
The object of type "Microsoft.PowerShell.Commands.Internal.Format.FormatStartData" is not valid or not in the correct sequence. This is likely caused by a user-specified "format-list" comm
and which is conflicting with the default formatting.
+ CategoryInfo : InvalidData: (:) [out-lineoutput], InvalidOperationException
+ FullyQualifiedErrorId : ConsoleLineOutputOutOfSequencePacket,Microsoft.PowerShell.Commands.OutLineOutputCommand
Also, when executing from the ISE, is there a way to force the ISE to release the files. I am having to close the ISE and reopen my script every time I want to make a testing change to the .sql file.
[reflection.assembly]::LoadWithPartialName("Microsoft.SqlServer.Smo")
$scriptspath = "C:\temp\psExecuteSQLScripts\scripts"
$SQLServer = "fidevc10"
$SQLDB = "Bank03"
# Create SMO Server Object
$Server = New-Object ('Microsoft.SQLServer.Management.Smo.Server') $SQLServer
# Get SMO DB Object
$db = $Server.Databases[$SQLDB]
# Load All SQL Scripts in Directory
$scripts = Get-ChildItem -Path (Join-Path $scriptspath "*") -Include "*.sql" -Recurse
# Loop through each script and execute
foreach ($SQLScript in $scripts)
$fullpath = $SQLScript.FullName
# Read the Script File into Powershell Memory
$reader = New-Object System.IO.StreamReader($fullpath)
$script = $reader.ReadToEnd()
# Execute SQL
Write-Host "Executing $SQLScript on $SQLDB...."
try
$ds = $db.ExecuteWithResults($script)
Foreach ($t in $ds.Tables)
Foreach ($r in $t.Rows)
Foreach ($c in $t.Columns)
Write-Host $c.ColumnName "=" $r.Item($c)
Write-Host "Complete"
catch [Exception]
Write-Warning "SQL Script Failed"
echo $_.Exception|format-list -force
Write-Host " " -BackgroundColor DarkCyan
Maybe you are looking for
-
How do I separate the content of two iTunes accounts on one PC running Windows 7?
Hello. I have a dilemma that has been going on for years and am hopeful that someone can outdo the staff at the Apple Store Genius Bar who, after trying multiple times, could not solve this problem. This is a doozie, so get comfortable... My wife an
-
Birthday calendar from ical to icloud
how do i get my birthday calendar on ical to appear on icloud??
-
Change the schedule line committed qty in PO items using ME_PROCESS_PO_CUST
Dear Experts, I want to make the PO item schedule line committed quantity MNG02 field to zero, for this purpose I wrote the logic as below. but its not changing the committed quantity to zero. Please advice me. method IF_EX_ME_PROCESS_PO_CUST~PROCESS
-
How to restore photos after i tried to delete them, they are still there
I tried to delete some photos to give me room on my start up disc. First I tried saving them to a thumb drive then tried deleting the pix. The photos come up blank but I still see them sometimes. how do I restore them completely. part 2 what is the b
-
Adobe installed but not working ... :/
I have an iPhone 4S I have an email with an attachment document on it that I would like to use and alter periodically . I installed the adobe app thinking everything was easy . I installed acrobat within the app . I can read my attached document but