How To... Execute Planning Functions and Sequences from MS Office Ribbon
Dear all,
I am working with a SAP how to paper, which is called:
How To... Execute Planning Functions and Sequences from MS Office Ribbon.
It is working absolutely fine and I am pretty satisfied, but as you probably know "Control the visibility of a button based on the visibility of a related crosstab: the button just disappears once the related crosstab is not located on the active sheet."
This means, when I insert different queries in different crosstabs, only one crosstab will have my own created ribbon. Is it also possible to set another specific ribbon with other buttons for another crosstab? Can I change the macro, included in the appendix of the how to paper, regarding this issue?
Thanks in advance!
Kind regards
Dominik Drebinger
Hey Martin,
thanks for your reply, but I solved the problem on my own. Unfortunately my colleague did not see that the crosstabs had to be defined differently.
Like this:
Label
Screentip
Msolmage name
Crosstab name
Copy Initial Aligned
Copy Initial Aligned
CacheListData
SAPCrosstab1
Copy Initial Aligned
Copy Initial Aligned
CacheListData
SAPCrosstab3
Copy Initial Aligned
Copy Initial Aligned
CacheListData
SAPCrosstab5
The macro, provided by the HowTo, is therefore working perfectly fine.
Thanks though
Dominik
Similar Messages
-
How to execute a function and return the result into a bind variable
Hi,
I am trying to calculate the sum of salaries of all persons with a particular JOB_ID using a function TOTAL_INCOME(v_job_id).
create or replace function total_income
+(v_job_id IN varchar2)+
RETURN number IS
v_total number(6);
cursor get_sal is
select salary from employees
where job_id = v_job_id;
BEGIN
v_total := 0;
for emp in get_sal
loop
v_total := v_total emp.salary;+
end loop;
dbms_output.put_line('Total salary of '||v_job_id||' is: '|| v_total);
return v_total;
END;
Now I woud like to execute this function and assign the returned value into a bind variable test_sal
variable test_sal number(6)
SELECT total_income('AD_VP') into :test_sal FROM DUAL;
dbms_output.put_line('Total Sal:'||:test_sal);
This is returning the below errors:
SELECT total_income('AD_VP') into :test_sal FROM DUAL
*+
Error at line 0
ORA-01036: illegal variable name/number
dbms_output.put_line('Total Sal:'||:test_sal);
Error at line 3
ORA-00900: invalid SQL statement
Could someone help me what could be the problem?? Thanks for your time...Dear,
If everything you will do will be done inside PL/SQL (stored procedure or stored function) then you don't have to care about bind variable.
When using PL/SQL (static SQL) you will never encounter issues related to bind variables. PL/SQL itself takes care of your code and uses bind variables behind the scene.
The only situation where you have to look carefully to the use of bind variables within PL/SQL is when you use Dynamic sql into stored procedures or functions.
So, see in the light of the above comment, if you have to care about returning your function into a bind variable?
Best regards
Mohamed Houri -
Need Information of how to Consume/Execute Planning Function & Planning Sequence in Design Studio
Dear Colleague,
We are trying to have a PoC demonstrating BW planning function and Planning sequence in SAP Business Objects Design Studio.
1. In the process, we have built our own Planning function and Planning sequences in our BW system and they are working as per expectation in the BW system.
2. We added the Planning function and Planning Sequence on to the Design Studio App.
But now how to we add these Planning function and Planning sequence on to the Dashboard.
Is there any container to add these planning objects on to the dashboard.
Or how to execute or Consume these Planning functions and sequences in Design Studio dashboard.
And any Document or Information in detail would definitely help a lot.
Please answer the question underlined.
Thanks,
VijayHi Mustafa,
Thanks for replying!
But Since this is an Internal project. We are already using Version 1.3.
Solving double purpose of evaluating the tool and coming up with the application as well.
As I said in my previous description, we were able to add Planning Functions and Planning Sequences on to Design Studio using menu options available.
But not sure of how to consume or execute them in the app. To get the rows of records, change values, Save and Transfer values as we do it with the Planning function with BW backend.
Thanks,
Vijay -
Planning function and planning sequence of Design studio new features!!
Hi Experts
Recently I have updated my design studio to 1.3 and happy to see many new updates. Meanwhile i saw some new features add planning function and planning sequence.
As per my understanding, Using this features we can enter data at run time. My query is here
Is it like we are entering data at run time and see the changes in current data(chart series)
Ex: Add discount for product 10% and relevant data(in chart) reduced to 10%
or
Is it like integrated planning? Once we enter data in run time and it saves in BW planning cube?
I am totally confused with this feature.. Can any one help me to get clear understanding on this please !
Regards,
Mathivanan MHi,
maybe these two article can help you:
#1 Planning in Design Studio 1.3
#2 Planning in DS 1.3 - Using different script methods for planning
As i unterstand, it's only possible to write back in BW.
Best Regards
Sebastian -
How to run the Oracle Triggers,Functions and Procedures from java
Hi ,
I want to execute the Oracle's Triggers, Functions and Procedures from java as like executing the SQL commands by using Execute statements.
Or can we have some other option for doing this.
Plz help me ...you can use CallableStatement interface of JDBC to execute any DBMS triger,stored procedure ....
refer any of the JDBC book for extra help
hope you got it
Azeem Ahmed -
Error while executing planning Function
Hi All,
I'm getting some error while executing planning function. Below are errors. Please check and provide solution.
Errors occurred when executing planning function RTFMPF01/RTFMPG01
Value 08 of chara Region does not correspond to the attrib.val MI of chara Store
Value 10 of chara Region does not correspond to the attrib.val RM of chara Store
Value 11 of chara Region does not correspond to the attrib.val NA of chara Store
Thanks,
VamsiHi,
Value 08 of chara Region does not correspond to the attrib.val MI of chara Store
Looks like there is a characteristics relationship which derives the attribute store from Region.
Check the master data for Region for attribute Store and the corresponding values.
The values that are maintained in the master data will only be allowed to enter in the cube.
Thanks
pratyush -
Macro Error while executing planning functions or saving data
Dear All,
I am getting following error in BEx Analyzer while executing planning function or pressing a save button.
Note: Excel is 2007 version.
Cannot run the macro "XXXXXX.xlsx". The macro may not be available in this workbook or all macros may be disabled.
I changed the settings in Macro Settings (Office Button -> Excel Options -> Trust Center -> Trust Center Settings-> Macro Settings) eventhough it is showing that above message.
selected ->
Enalble all macros
Trust access to VBA project object model.
If anybody faced this issue kindly reply to this.
Best Regards,
SGHello everybody,
i am facing exactlythe same issue! I am currently running GUI Patch Level 14 and BI Add on Patch Level 10.
I have also adjusted all necessary settings in Excel Options like Activate all Macros and Trust VBA Coding.
Does anybody have another Solution.
As mentioned before Gui Patch 13 and BI Add On Patch 10 obviously arent the solutiuon.
Best regards
Janos -
How do I upload contacts and calanders from Outlook to iCloud
How do I upload contacts and calanders from Outlook to iCloud
Music is not stored in the iCloud. Past purchases can be reloaded from the cloud, and iTunes Match provides this function to non-purchased music.
-
How to find BADI Defination and Implemantation from Method of BADI?
HI,
can anyone tell me that how to find BADI Defination and Implemantation from Method of BADI?& Report ZPJA_PM002 (V2) &
& Text Elements: &
& P_DEVC Show user-exits from development class &
& P_LIMIT Limit submit program selection &
& P_FUNC Show function modules &
& P_SUBM Show submit programs &
& S01 Selection data (TCode takes precedence over program name) &
report zpja_pm002
no standard page heading
line-size 158.
*tables: enlfdir. "Additional Attributes for Function Modules
data: tabix like sy-tabix,
w_linnum type i,
w_off type i,
w_index like sy-tabix,
w_include like trdir-name,
w_prog like trdir-name,
w_incl like trdir-name,
w_area like rs38l-area,
w_level,
w_str(50) type c,
w_funcname like tfdir-funcname.
constants: c_fmod(40) type c value 'Function modules selected: ',
c_subm(40) type c value 'Submit programs selected: ',
c_col1(12) type c value 'Enhanmt Type',
c_col2(40) type c value 'Enhancement',
c_col3(30) type c value 'Program/Include',
c_col4(20) type c value 'Enhancement Name',
c_col5(40) type c value 'Enhancement Description'.
Work Areas: ABAP Workbench
data: begin of wa_d010inc.
data: master type d010inc-master.
data: end of wa_d010inc.
data: begin of wa_tfdir.
data: funcname type tfdir-funcname,
pname type tfdir-pname,
include type tfdir-include.
data: end of wa_tfdir.
data: begin of wa_tadir.
data: devclass type tadir-devclass.
data: end of wa_tadir.
data: begin of wa_tstc.
data: pgmna type tstc-pgmna.
data: end of wa_tstc.
data: begin of wa_tstcp.
data: param type tstcp-param.
data: end of wa_tstcp.
data: begin of wa_enlfdir.
data: area type enlfdir-area.
data: end of wa_enlfdir.
Work Areas: BADIs
data: begin of wa_sxs_attr.
data: exit_name type sxs_attr-exit_name.
data: end of wa_sxs_attr.
data: begin of wa_sxs_attrt.
data: text type sxs_attrt-text.
data: end of wa_sxs_attrt.
Work Areas: Enhancements
data: begin of wa_modsap.
data: member type modsap-member.
data: end of wa_modsap.
data: begin of wa_modsapa.
data: name type modsapa-name.
data: end of wa_modsapa.
data: begin of wa_modsapt.
data: modtext type modsapt-modtext.
data: end of wa_modsapt.
Work Areas: Business Transaction Events
data: begin of wa_tbe01t.
data: text1 type tbe01t-text1.
data: end of wa_tbe01t.
data: begin of wa_tps01t.
data: text1 type tps01t-text1.
data: end of wa_tps01t.
user-exits
types: begin of t_userexit,
type(12) type c,
pname like trdir-name,
txt(300),
level type c,
modname(30) type c,
modtext(40) type c,
end of t_userexit.
data: i_userexit type standard table of t_userexit with header line.
Function module developmnet classes
types: begin of t_devclass,
clas like trdir-clas,
end of t_devclass.
data: i_devclass type standard table of t_devclass with header line.
Submit programs
types: begin of t_submit,
pname like trdir-name,
level,
done,
end of t_submit.
data: i_submit type standard table of t_submit with header line.
Source code
types: begin of t_sourcetab, "#EC * (SLIN lügt!)
line(200), "#EC * (SLIN lügt!)
end of t_sourcetab. "#EC * (SLIN lügt!)
data: sourcetab type standard table of t_sourcetab with header line.
data c_overflow(30000) type c.
Description of an ABAP/4 source analysis token
data: i_stoken type standard table of stokex with header line.
data wa_stoken like i_stoken.
Description of an ABAP/4 source analysis statement
data: i_sstmnt type standard table of sstmnt with header line."#EC
keywords for searching ABAP code
types: begin of t_keywords,
word(30),
end of t_keywords.
data: keywords type standard table of t_keywords with header line.
function modules within program
types: begin of t_fmodule,
name like rs38l-name,
pname like trdir-name,
pname2 like trdir-name,
level,
bapi,
done,
end of t_fmodule.
data: i_fmodule type standard table of t_fmodule with header line.
& Selection Options &
selection-screen begin of block selscr1 with frame title text-s01.
parameter: p_pname like trdir-name memory id rid,
p_tcode like syst-tcode,
p_limit(4) type n default 100,
p_devc like rihea-dy_ofn default ' ',
p_func like rihea-dy_ofn default ' ',
p_subm like rihea-dy_ofn default ' '.
selection-screen end of block selscr1.
& START-OF-SELECTION &
start-of-selection.
if p_pname is initial and p_tcode is initial.
message e008(hrfpm). "Make entry on the selection screen
stop.
endif.
ensure P_LIMIT is not zero.
if p_limit = 0.
p_limit = 1.
endif.
perform data_select.
perform get_submit_data.
perform get_fm_data.
perform get_additional_data.
perform data_display.
& Form DATA_SELECT &
form data_select.
data selection message to sap gui
call function 'SAPGUI_PROGRESS_INDICATOR'
destination 'SAPGUI'
keeping logical unit of work
exporting
text = 'Get programs/includes' "#EC NOTEXT
exceptions
system_failure
communication_failure
. "#EC *
determine search words
keywords-word = 'CALL'.
append keywords.
keywords-word = 'FORM'.
append keywords.
keywords-word = 'PERFORM'.
append keywords.
keywords-word = 'SUBMIT'.
append keywords.
keywords-word = 'INCLUDE'.
append keywords.
if not p_tcode is initial.
get program name from TCode
select single pgmna from tstc into wa_tstc-pgmna
where tcode eq p_tcode.
if not wa_tstc-pgmna is initial.
p_pname = wa_tstc-pgmna.
TCode does not include program name, but does have refereve TCode
else.
select single param from tstcp into wa_tstcp-param
where tcode eq p_tcode.
if sy-subrc = 0.
check wa_tstcp-param(1) = '/'.
check wa_tstcp-param+1(1) = '*'.
if wa_tstcp-param ca ' '.
endif.
w_off = sy-fdpos + 1.
subtract 2 from sy-fdpos.
if sy-fdpos gt 0.
p_tcode = wa_tstcp-param+2(sy-fdpos).
endif.
select single pgmna from tstc into wa_tstc-pgmna
where tcode eq p_tcode.
p_pname = wa_tstc-pgmna.
if sy-subrc <> 0.
message e110(/saptrx/asc) with 'No program found for: '
p_tcode."#EC NOTEXT
stop.
endif.
else.
message e110(/saptrx/asc) with 'No program found for: ' p_tcode.
"#EC NOTEXT
stop.
endif.
endif.
endif.
Call customer-function aus Program coding
read report p_pname into sourcetab.
if sy-subrc > 0.
message e017(enhancement) with p_pname raising no_program."#EC *
endif.
scan abap-source sourcetab tokens into i_stoken
statements into i_sstmnt
keywords from keywords
overflow into c_overflow
with includes.
WITH ANALYSIS.
if sy-subrc > 0. "keine/syntakt. falsche Ablauflog./Fehler im Skanner
message e130(enhancement) raising syntax_error. "#EC *
endif.
check I_STOKEN for entries
clear w_linnum.
describe table i_stoken lines w_linnum.
if w_linnum gt 0.
w_level = '0'.
w_prog = ''.
w_incl = ''.
perform data_search tables i_stoken using w_level w_prog w_incl.
endif.
endform. "DATA_SELECT
& Form GET_FM_DATA &
form get_fm_data.
data selection message to sap gui
call function 'SAPGUI_PROGRESS_INDICATOR'
destination 'SAPGUI'
keeping logical unit of work
exporting
text = 'Get function module data' "#EC NOTEXT
exceptions
system_failure
communication_failure
. "#EC *
Function module data
sort i_fmodule by name.
delete adjacent duplicates from i_fmodule comparing name.
loop at i_fmodule where done ne 'X'.
clear: i_stoken, i_sstmnt, sourcetab, wa_tfdir, w_include .
refresh: i_stoken, i_sstmnt, sourcetab.
clear wa_tfdir.
select single funcname pname include from tfdir into wa_tfdir
where funcname = i_fmodule-name.
check sy-subrc = 0.
call function 'FUNCTION_INCLUDE_SPLIT'
exporting
program = wa_tfdir-pname
importing
group = w_area.
concatenate 'L' w_area 'U' wa_tfdir-include into w_include.
i_fmodule-pname = w_include.
i_fmodule-pname2 = wa_tfdir-pname.
modify i_fmodule.
read report i_fmodule-pname into sourcetab.
if sy-subrc = 0.
scan abap-source sourcetab tokens into i_stoken
statements into i_sstmnt
keywords from keywords
with includes.
if sy-subrc > 0.
message e130(enhancement) raising syntax_error.
endif.
check i_stoken for entries
clear w_linnum.
describe table i_stoken lines w_linnum.
if w_linnum gt 0.
w_level = '1'.
w_prog = i_fmodule-pname2.
w_incl = i_fmodule-pname.
perform data_search tables i_stoken using w_level w_prog w_incl.
endif.
endif.
endloop.
if p_devc = 'X'.
loop at i_fmodule.
clear: wa_tadir, wa_enlfdir.
select single area from enlfdir into wa_enlfdir-area
where funcname = i_fmodule-name.
check not wa_enlfdir-area is initial.
select single devclass into wa_tadir-devclass
from tadir where pgmid = 'R3TR'
and object = 'FUGR'
and obj_name = wa_enlfdir-area.
check not wa_tadir-devclass is initial.
move wa_tadir-devclass to i_devclass-clas.
append i_devclass.
i_fmodule-done = 'X'.
modify i_fmodule.
endloop.
sort i_devclass.
delete adjacent duplicates from i_devclass.
endif.
endform. "GET_FM_DATA
& Form GET_SUBMIT_DATA &
form get_submit_data.
data selection message to sap gui
call function 'SAPGUI_PROGRESS_INDICATOR'
destination 'SAPGUI'
keeping logical unit of work
exporting
text = 'Get submit data' "#EC NOTEXT
exceptions
system_failure
communication_failure
. "#EC *
sort i_submit.
delete adjacent duplicates from i_submit comparing pname.
w_level = '0'.
loop at i_submit where done ne 'X'.
clear: i_stoken, i_sstmnt, sourcetab.
refresh: i_stoken, i_sstmnt, sourcetab.
read report i_submit-pname into sourcetab.
if sy-subrc = 0.
scan abap-source sourcetab tokens into i_stoken
statements into i_sstmnt
keywords from keywords
with includes.
if sy-subrc > 0.
message e130(enhancement) raising syntax_error.
continue.
endif.
check i_stoken for entries
clear w_linnum.
describe table i_stoken lines w_linnum.
if w_linnum gt 0.
w_prog = i_submit-pname.
w_incl = ''.
perform data_search tables i_stoken using w_level w_prog w_incl.
endif.
endif.
restrict number of submit program selected for processing
describe table i_submit lines w_linnum.
if w_linnum ge p_limit.
w_level = '1'.
endif.
i_submit-done = 'X'.
modify i_submit.
endloop.
endform. "GET_SUBMIT_DATA
& Form DATA_SEARCH &
form data_search tables p_stoken structure stoken
using p_level p_prog p_incl.
loop at p_stoken.
clear i_userexit.
tabix = sy-tabix + 1.
i_userexit-level = p_level.
if i_userexit-level = '0'.
if p_incl is initial.
i_userexit-pname = p_pname.
else.
concatenate p_pname '/' p_incl into i_userexit-pname.
endif.
else.
if p_incl is initial.
i_userexit-pname = p_prog.
else.
concatenate p_prog '/' p_incl into i_userexit-pname.
endif.
endif.
Include
if p_stoken-str eq 'INCLUDE'.
check p_level eq '0'. " do not perform for function modules
*(2nd pass)
w_index = sy-tabix + 1.
read table p_stoken index w_index into wa_stoken.
check not wa_stoken-str cs 'STRUCTURE'.
check not wa_stoken-str cs 'SYMBOL'.
read table i_submit with key pname = wa_stoken-str.
if sy-subrc <> 0.
i_submit-pname = wa_stoken-str.
i_submit-level = p_level.
append i_submit.
endif.
endif.
Enhancements
if p_stoken-str eq 'CUSTOMER-FUNCTION'.
clear w_funcname.
read table p_stoken index tabix.
translate p_stoken-str using ''' '.
condense p_stoken-str.
if p_prog is initial.
concatenate 'EXIT' p_pname p_stoken-str into w_funcname
separated by '_'.
else.
concatenate 'EXIT' p_prog p_stoken-str into w_funcname
separated by '_'.
endif.
select single member from modsap into wa_modsap-member
where member = w_funcname.
if sy-subrc = 0. " check for valid enhancement
i_userexit-type = 'Enhancement'.
i_userexit-txt = w_funcname.
append i_userexit.
else.
clear wa_d010inc.
select single master into wa_d010inc-master
from d010inc
where include = p_prog.
concatenate 'EXIT' wa_d010inc-master p_stoken-str into
w_funcname
separated by '_'.
i_userexit-type = 'Enhancement'.
i_userexit-txt = w_funcname.
endif.
endif.
BADIs
if p_stoken-str cs 'cl_exithandler='.
w_index = sy-tabix + 4.
read table p_stoken index w_index into wa_stoken.
i_userexit-txt = wa_stoken-str.
replace all occurrences of '''' in i_userexit-txt with space.
i_userexit-type = 'BADI'.
append i_userexit.
endif.
Business transaction events
if p_stoken-str cs 'OPEN_FI_PERFORM'.
i_userexit-type = 'BusTrEvent'.
i_userexit-txt = p_stoken-str.
replace all occurrences of '''' in i_userexit-txt with space.
i_userexit-modname = i_userexit-txt+16(8).
case i_userexit-txt+25(1).
when 'E'.
clear wa_tbe01t.
select single text1 into wa_tbe01t-text1 from tbe01t
where event = i_userexit-txt+16(8)
and spras = sy-langu.
if wa_tbe01t-text1 is initial.
i_userexit-modtext = ''. "#EC NOTEXT
else.
i_userexit-modtext = wa_tbe01t-text1.
endif.
i_userexit-modname+8 = '/P&S'. "#EC NOTEXT
when 'P'.
clear wa_tps01t.
select single text1 into wa_tps01t-text1 from tps01t
where procs = i_userexit-txt+16(8)
and spras = sy-langu.
i_userexit-modtext = wa_tps01t-text1.
i_userexit-modname+8 = '/Process'.
endcase.
append i_userexit.
endif.
Program exits
if p_stoken-str cs 'USEREXIT_'.
i_userexit-type = 'Program Exit'.
i_userexit-txt = p_stoken-str.
replace all occurrences of '''' in i_userexit-txt with space.
append i_userexit.
endif.
Submit programs
if p_stoken-str cs 'SUBMIT'.
check p_level eq '0'. " do not perform for function modules
*(2nd pass)
check not p_stoken-str cs '_'. " ensure not SUBMIT_XXX
w_index = sy-tabix + 1.
read table p_stoken index w_index into wa_stoken.
check not wa_stoken-str cs '_'. " ensure not SUBMIT_XXX
replace all occurrences of '''' in wa_stoken-str with space.
read table i_submit with key pname = wa_stoken-str.
if sy-subrc <> 0.
i_submit-pname = wa_stoken-str.
i_submit-level = p_level.
append i_submit.
endif.
endif.
Perform routines (which reference external programs)
if p_stoken-str cs 'PERFORM'.
check p_level eq '0'. " do not perform for function modules
*(2nd pass)
w_index = sy-tabix + 1.
read table p_stoken index w_index into wa_stoken.
if not wa_stoken-ovfl is initial.
w_off = wa_stoken-off1 + 10.
w_str = c_overflow+w_off(30).
find ')' in w_str match offset w_off.
w_off = w_off + 1.
wa_stoken-str = w_str(w_off).
endif.
check wa_stoken-str cs '('.
w_off = 0.
while sy-subrc = 0.
if wa_stoken-str+w_off(1) eq '('.
replace section offset w_off length 1 of wa_stoken-str with ''
replace all occurrences of ')' in wa_stoken-str with space.
read table i_submit with key pname = wa_stoken-str.
if sy-subrc <> 0.
i_submit-pname = wa_stoken-str.
append i_submit.
endif.
exit.
else.
replace section offset w_off length 1 of wa_stoken-str with ''
shift wa_stoken-str left deleting leading space.
endif.
endwhile.
endif.
Function modules
if p_stoken-str cs 'FUNCTION'.
clear i_fmodule.
check p_level eq '0'. " do not perform for function modules
*(2nd pass)
w_index = sy-tabix + 1.
read table p_stoken index w_index into wa_stoken.
if wa_stoken-str cs 'WF_'.
if wa_stoken-str cs 'IF_'.
break-point.
endif.
if wa_stoken-str cs 'BAPI'.
i_fmodule-bapi = 'X'.
endif.
replace first occurrence of '''' in wa_stoken-str with space.
replace first occurrence of '''' in wa_stoken-str with space.
if sy-subrc = 4. " didn't find 2nd quote (ie name truncated)
clear wa_tfdir.
concatenate wa_stoken-str '%' into wa_stoken-str.
select single funcname into wa_tfdir-funcname from tfdir
where funcname like wa_stoken-str.
if sy-subrc = 0.
i_fmodule-name = wa_tfdir-funcname.
else.
continue.
endif.
else.
i_fmodule-name = wa_stoken-str.
endif.
i_fmodule-level = p_level.
append i_fmodule.
endif.
endloop.
endform. "DATA_SEARCH
& Form GET_ADDITIONAL_DATA &
form get_additional_data.
data selection message to sap gui
call function 'SAPGUI_PROGRESS_INDICATOR'
destination 'SAPGUI'
keeping logical unit of work
exporting
text = 'Get additional data' "#EC NOTEXT
exceptions
system_failure
communication_failure
. "#EC *
loop at i_userexit.
Enhancement data
if i_userexit-type cs 'Enh'.
clear: wa_modsapa.
select single name into wa_modsapa-name from modsap
where member = i_userexit-txt.
check sy-subrc = 0.
i_userexit-modname = wa_modsapa-name.
clear wa_modsapt.
select single modtext into wa_modsapt-modtext from modsapt
where name = wa_modsapa-name
and sprsl = sy-langu.
i_userexit-modtext = wa_modsapt-modtext.
endif.
BADI data
if i_userexit-type eq 'BADI'.
clear wa_sxs_attr.
select single exit_name into wa_sxs_attr-exit_name from sxs_attr
where exit_name = i_userexit-txt.
if sy-subrc = 0.
i_userexit-modname = i_userexit-txt.
else.
i_userexit-modname = 'Dynamic call'. "#EC NOTEXT
endif.
clear wa_sxs_attrt.
select single text into wa_sxs_attrt-text from sxs_attrt
where exit_name =
wa_sxs_attr-exit_name
and sprsl = sy-langu.
i_userexit-modtext = wa_sxs_attrt-text.
endif.
modify i_userexit.
endloop.
get enhancements via program package
clear wa_tadir.
select single devclass into wa_tadir-devclass from tadir
where pgmid = 'R3TR'
and object = 'PROG'
and obj_name = p_pname.
if sy-subrc = 0.
clear: wa_modsapa, wa_modsapt.
select name from modsapa into wa_modsapa-name
where devclass = wa_tadir-devclass.
select single modtext from modsapt into wa_modsapt-modtext
where name = wa_modsapa-name
and sprsl = sy-langu.
read table i_userexit with key modname = wa_modsapa-name.
if sy-subrc <> 0.
i_userexit-modtext = wa_modsapt-modtext.
i_userexit-type = 'Enhancement'. "#EC NOTEXT
i_userexit-modname = wa_modsapa-name.
i_userexit-txt = 'Determined from program DevClass'."#EC NOTEXT
i_userexit-pname = 'Unknown'. "#EC NOTEXT
append i_userexit.
endif.
endselect.
endif.
endform. "GET_ADDITIONAL_DATA
& Form DATA_DISPLAY &
form data_display.
data selection message to sap gui
call function 'SAPGUI_PROGRESS_INDICATOR'
destination 'SAPGUI'
keeping logical unit of work
exporting
text = 'Prepare screen for display' "#EC NOTEXT
exceptions
system_failure
communication_failure
. "#EC *
sort i_userexit by type txt modname.
delete adjacent duplicates from i_userexit comparing txt modname.
format headings
write: 'Enhancements from main program'. "#EC NOTEXT
write: /.
uline.
format color col_heading.
write: / sy-vline,
(12) c_col1, "Enhanmt Type
sy-vline,
(40) c_col2, "Enhancement
sy-vline,
(30) c_col3, "Program/Include
sy-vline,
(20) c_col4, "Enhancement name
sy-vline,
(40) c_col5, "Enhancement description
sy-vline.
format reset.
uline.
format lines
loop at i_userexit.
set line colour
case i_userexit-type.
when 'Enhancement'.
format color 3 intensified off.
when 'BADI'.
format color 4 intensified off.
when 'BusTrEvent'.
format color 5 intensified off.
when 'Program Exit'.
format color 6 intensified off.
when others.
format reset.
endcase.
write: / sy-vline,
i_userexit-type,
sy-vline,
i_userexit-txt(40),
sy-vline,
i_userexit-pname(30),
sy-vline,
i_userexit-modname(20),
sy-vline,
i_userexit-modtext(40),
sy-vline.
endloop.
format reset.
uline.
user-exits from development class of function modules
if p_devc = 'X'.
write: /.
write: / 'User-exits from function module development class'."#EC
*NOTEXT
write: 157''.
uline (90).
write: 157''.
loop at i_devclass.
clear wa_modsapa.
select name from modsapa into wa_modsapa
where devclass = i_devclass-clas.
select single name modtext into corresponding fields of wa_modsapt
from modsapt
where name = wa_modsapa-name
and sprsl = sy-langu.
format color 3 intensified off.
write: / sy-vline,
(12) 'Enhancement',
sy-vline,
wa_modsapa-name,
sy-vline,
wa_modsapt-modtext,
sy-vline.
endselect.
endloop.
uline (90).
format reset.
endif.
describe table i_fmodule lines w_linnum.
write: / c_fmod , at 35 w_linnum. "#EC NOTEXT
write: 157''.
if p_func = 'X'.
display fuction modules used in program
uline (38).
write: 157''.
loop at i_fmodule.
write: sy-vline,
i_fmodule-name,
sy-vline,
i_fmodule-bapi,
sy-vline.
write: 157''.
endloop.
uline (38).
endif.
describe table i_submit lines w_linnum.
write: / c_subm , at 35 w_linnum. "#EC NOTEXT
write: 157''.
if p_subm = 'X'.
display submit programs used in program
uline (44).
write: 157''.
loop at i_submit.
write: sy-vline,
i_submit-pname,
sy-vline.
write: 157''.
endloop.
uline (44).
endif.
issue message with number of user-exits displayed
describe table i_userexit lines w_linnum.
message s697(56) with w_linnum.
endform. "DATA_DISPLAY
reward points if it helps
gunjan -
How can i stream video and audio from macbook air to my tv?
how can i stream video and audio from macbook air to my tv?
Wirelessly: you need an AirPlay - enabled device such as an AppleTV.
Wired: if your TV has an HDMI port, you need a Thunderbolt to HDMI adapter such as this one:
Mini DisplayPort to HDMI® Adapter w/ Audio Support
If your TV does not have an HDMI port you will need a converter that will convert HDMI input to whatever input your TV requires. -
How do I transfer files and documents from one user account to another?
How do I transfer documents and files from one user account to another?
You haven't understood me. Follow these steps:
1. Log in the user where are the files you want to transfer, and open a Finder window.
2. In Finder, select Go menu (on the menu bar) > Go to Folder, and type /Users/Shared. Now you're on Shared folder, so leave that window.
3. Open a new Finder window without closing the old one, go to the folder with the files you want to transfer, and copy them to Shared folder.
4. After copying the files to Shared folder, go to > Log Out, and log in the other user.
5. Repeat the step 2, and you will get access to the transferred files. Now, you can open them directly from this folder, or you can copy them to a folder on your user folder -
How do I copy music and video from my iPod to a new PC?
My itunes PC no longer works. How can I copy music and video from my iPod to a new PC?
You can't transfer music from an iPod to a PC. Apple do not provide that facility. It can be done with third party software though. There are a variety of these available though so search google for 'ipod to itunes'.
-
How do I delete music and photos from my iCloud account? I've read that you can't. Really? Is that true?
You can delete photo stream photos from iCloud by just deleting them on your iPod. My photo stream photos are automatically deleted from iCloud after 30 days anyway. Just so you are aware, deleting photo stream photos doesn't free up any space in your account as they don't use your personal iCloud account storage.
You can't delete music from iCloud because the music isn't stored in your account; it's stored in the iTunes store. What you are seeing are links to your previously purchased music in the iTuens store, allowing you to redownload them if you want to. You can't remove anything from your list of previous purchases. If you don't want to see these "iTunes in the Cloud" purchases in your song list, go to Settings>iTunes & App Store and turn off Music under Show All. LIke photo stream photos, this music doesn't use any of your personal iCloud account storage. -
How can I stop music and movies from being automatically deleted from my phone and saved on the cloud? I've just tried to watch a movie on my 2 hour commute, but yet AGAIN it has been removed. I do NOT want to spank all of my data allowance downloading it again, especially because (believe it or not) I added it to my phone because that's precisely where I wanted it!! Any help much appreciated
FYI I had to put this link into firefox to reply - because **** back safari just wouldn't register my clicks to any of the links on the post... Despite reloadeing and even restarting my computer. Totally annoying and a massive pain in the ***.
But in terms of my initial query; thanks for responding. But no, this is NOT the cause of the problem. I have auto sync and sync over wifi activated, but have also selected manually manage music and videos. Plus, all of my music and videos are on my macbook, absolutely all of it, so if it my phone was syncing with my macbook everything would still be on the phone. Life would be peachy if my phone jsut copied everything that was on my macbook, but unfortuantely it keeps deleting tracks for no apparent reason.
Any thoughts greatly welcomed, because at the moment i can only conclude that my iphone is crap. -
How do I transfer music and ringtones from my apple pc to my iphone 4, all downloaded into my ipod on my phone, unable to transfer into ringtones, help
Music transferred from your iTunes library to your iPhone is transferred to the iPod on your iPhone only.
If a custom ringtone is in the correct format, it will be available under the Ringtones tab for your iPhone sync preferences with iTunes. Are the custom ringtones in your iTunes library available under the Ringtones tab for your iPhone sync preferences with iTunes?
Maybe you are looking for
-
Solution landscape is blank in DSWP.
Our tech. person configure the Solman of IMG and following 1)Configured one new solution with id,cust no,lang. etc. 2)Maintained system land landscape in SMSY. 3)LANDSCAPE components were --server,db,systems,system components were created. 4)Initial
-
A simple Java program to be compiled with ojc and executed with java.exe
Hi , This thread is relevant to Oracle Java Compiler (file ojc) and jave.exe file. I have written a simple java program which consists of two simple simple classes and using the JDev's 10.1.3.2 ojc and java files , i'm trying to execute it after the
-
Hi, i bought my ipod touch 4g used online and it recently fell and cracked. I tried registering it online with apple but it said it was already linked to a account. i tried contacted the people i bought it from but thay wont respond. when i take it i
-
Outlook Express Contacts to my new iMac
I am so frustrated and can't seem to figure a way to get my old outlook express contacts to my new iMac. Anyone know how this is done? I have tried a few ways but nothing seems to work for me. Thanks
-
I am getting disc full messages on my Mac, unable to empty trash because not enough space, how do I proceed or do I need to increase my 4gig of memory in which case how do I go about this process.