How to execute SAP Transaction from cmd

Hi, Dear All,
How can we execute an SAP Transaction from the command prompt.
Your inputs are highly appreacited.
regards

Go to the command prompt (CMD) and change to the directory where the SAPGUI software is located. Then, run: sapgui <hostname> <instance> Example: sapgui sapprd 00 This is a very fast way to start a SAPGUI session against the indicated SAP system and instance number.
another way is to locate the file of logon pad
in my system it was at C:\WINDOWS\SAPwksta\setup\SAL
after that type saplogon.sal
It will take you to the logon pad.

Similar Messages

How to block sap transactions from particular date

how to block sap transactions from particular date

Hi
If it is G/L Account inactive means.
Go to => Financial => Chart of Account => Select the Account to be Blocked = > Account Details
You can found the Active and Inactive Parameters. You can Specify the date period you want to block.
If it is Business Partner Means
Go to Business partners => Select the Business partner you want to block.
You can find the Active and Inactive Parameters. You can Specify the date period you want to block.
If you want period means
Go to Administration => System Initialization => Posting period => Click the above period => Select the period status and Lock
With Regards
Balaji

Execute SAP transaction from Outlook

Hi,
I want to know whether it is possible to open SAP transaction from out look or not. My scenario is when work item triggers from WF to Outlook, which carry a link to open SAP transaction directly from outlook. If it is possibli plz explain me in detail, what are the steps involved, if not what are the alternative solutions. We are working ECC5.0

Hi Shambu,
First, please remove your e-mail from your post as this is not according to forum guidelines.
It is possible to send a link to a transaction to outlook. It is similar to the executable attachments the extended notification and RSWUWFML2 create. You could check how they do it and reverse engineer for the transaction. But all the users need a SAPGui locally installed. This maybe a problem as the MAPI is used.
FYI the MAPI is no longer supported by SAP, it is not supported since release 4.7 I think. It has been replaced by RSWUWFML(2) which is being replaced by the extended notifications. I think there has been an article about it recently here on SDN.
Regards,
Martin

Call sap transaction from java

can anyone tell me how to call SAP transaction from JCO,
cheers
Ajay

Hi Ajay,
You should find or create functional module which covers your requrements.
Best regards, Maksim Rashchynski.

How to execute a Scenario from Windows CMD prompt

Please can you let me know how to execute the Scenario from a Windows CMD prompt? I am not sure if it is any different from "ODIStartScen" command that ODI uses to execute the scenario.
Appreciate your help.
Regards
B

Hi SH,
I tried running the scenario from the command line, but the process was not completed and it came back with the below message
Session : 131774001 finished with return code : 7000
Do I need to set up any environmental variables or any other setups before I can run the scenario from the command line?
Appreciate your help.
Regards
B

How to execute a transaction code in prod.Server from development server

Hi Friends,
How to execute a transaction code in prod.Server from development server,Pls give me your valuable suggestions...
Regards,
V.Balaji

i have a program in production system if i type the request and execute its sends a mail to my admin saying to transport the request to production system.....thats y??????
just tell me ur idea.............

Calling SAP Transaction from WDA

Hi,
We have a peculiar requirement of calling SAP Standard Transaction from Web Dynpro ABAP.Well, we tried achieving this using the Transactional iview. On click of appropiate link/button in my applicaiton, I can call the Transactional iview. But the problem is, I could not pass on the data from WDA Application to Transactional iview. I need some inputs in handling such cases.
The case might look something similar to PCR's final updation(like after all approvals of PCRs, the final Administrator executes the workitem which in turn calls the Notification Maintenance and this in turn calls the PA40 passing the data from Adobe form(XML data) to PA40 txn. Like this, After all my approvals, I would like to call the SAP Transaction passing the data from WDA Application. Hope I am clear.
Regards
<i><b>Raja Sekhar</b></i>

Hi,
Maybe you can use the information from this blog to pass dynamic parameters to the SAP transaction iview which you call with the created URl
How to launch SAP transaction & pass parameters via URL
Dagfinn

Calling SAP transaction from WebDynpro

HI,
Could someone post a link as to how I may call a SAP transaction from a webdynpro.
Will this be an external call to R/3 or can i get it embedded in my dynpro.......
Tnks..

Hi,
You can call by creating external window method.
create LINK to URL or LINK TO ACTION according to requirement, for this. write code in onaction of that.
data: iv_url type string value 'http://<server>:<port>/sap/bc/gui/sap/its/webgui?~transaction=*se38 RS38M-PROGRAMM=rsparam;DYNP_OKCODE=SHOP'.
data: api_component type ref to if_wd_component,
          window_manager type ref to if_wd_window_manager,
          window type ref to if_wd_window.
api_component = wd_comp_controller->wd_get_api( ).
window_manager = api_component->get_window_manager( ).
window = window_manager->create_external_window(
                 url = iv_url
                 modal = abap_false ).
window->open( ).
Cheers,
Kris.

How to create SAP transaction iView

Hello,
Can any body tell me indetail how to crate SAP transaction iView for "SE38" transaction.
Regards,
Amey Potale

Hi Amey
For creating Transaction iview you have to create a system first
goto system administration-System configuration-System Landscape-Portal content. right click and create new system. create dedicated r3 system.
Following are the system properties.
Application host-sap r/3 system
Login method-UIDPW
System id-R/3 system id
System number-R/3 system number
Port- 32+R/3 system number
System type-SAP_R#
User mapping type -admin,user
Then create a system alias
DO user mapping by going to User administration-User Mapping
Type Administrator and user.then click "edit"
DO the user mapping by selecting your system alias from the drop down
Then create an iview by going to content administration-portal content. right click new iview-Select SAP transaction iview. and give the necessary parameters(i.e:SE38).
FOr further doubts check Create SAP Transaction iView using SAPGUI for Windows
REgards
Rajeev.

Triggering an SAP Transaction from Adobe Form

Hi all,
i wanna know if i can Trigger an SAP Transaction from an Adobe Form...
so that i can open the transaction like MM01, or VA01.
THx,
Guru

Hi Graham!
I have a similar problem in transaction CIC0 and the Sales summary tab in CRM.
I have created a new class and assigned it to a new fact sheet. One column in this fact sheet should be a hyperlink defined in the way that you have described.
When using method get_event_parameter I are not getting any data for the SAPEVENT parameters - I don't get the value, only the keys:
<a href="SAPEVENT:?OBJTYPE&OBJKEY>
How should I procced to assign an object type and object key to this SAPEVENT???
Would also be very nice if anyone could explain how to "call transaction" works.
Help understanding this would be very appreciated.
BR
Mattias

Launch SAP Transaction from UWL and decision views

Hi,
Q1:
we wan't to launch a SAP Transaction from the Universal Worklist. Does anyone know how to do this explicitly?
Q2:
I have tried to add decisions directly to a List View, i.e. with the reject and approve columns. The columns do appear, but the checkboxes are not visible. From the log I can see a warning "No Custom Attribute exists for item ...".
The three options do appear correctly when you go to the details view for the item, and I did apply the same values for the actions (1,2,3).
Does anyone know how to do this?
PS! I have read the How To document, but could not find the answer there, nor in this forum.
Thanks,
Mikkel

I did fix question 2 above.
Still don't have a solution on how to launch a SAP Transaction. XML transcript below:
<?xml version="1.0" encoding="utf-8"?>
<!DOCTYPE UWLConfiguration PUBLIC '-//SAP//UWL1.0//EN' 'uwl_configuration.dtd'>
<UWLConfiguration version="1.0">
     <ItemTypes>
          <ItemType name="uwl.task.webflow.decision.SAP_R3_HumanResources_TS20000131" connector="WebFlowConnector" defaultView="TripApprovalView" defaultAction="viewDetail" executionMode="pessimistic">
               <ItemTypeCriteria systemId="SAP_R3_HumanResources" externalType="TS20000131" connector="WebFlowConnector"/>
               <Actions>
                    <Action name="1" userDecision="yes" handler="UserDecisionHandler"/>
                    <Action name="2" userDecision="yes" handler="UserDecisionHandler"/>
                    <Action name="3" userDecision="yes" handler="UserDecisionHandler"/>
               </Actions>
          </ItemType>
          <ItemType name="uwl.task.webflow.decision.SAP_R3_HumanResources_TS20000135" connector="WebFlowConnector" defaultView="TripCheckView" defaultAction="viewDetail" executionMode="pessimistic">
               <ItemTypeCriteria systemId="SAP_R3_HumanResources" externalType="TS20000135" connector="WebFlowConnector"/>
               <Actions>
                    <Action name="1" userDecision="yes" handler="UserDecisionHandler"/>
                    <Action name="2" userDecision="yes" handler="UserDecisionHandler"/>
               </Actions>
          </ItemType>
          <ItemType name="uwl.task.webflow.SAP_R3_HumanResources_TS40007901" connector="WebFlowConnector" defaultView="TimeApprovalView" defaultAction="launchSAPAction" executionMode="pessimistic">
               <ItemTypeCriteria systemId="SAP_R3_HumanResources" externalType="TS40007901" connector="WebFlowConnector"/>
               <Actions>
                    
                    
               </Actions>
          </ItemType>
     </ItemTypes>
     <Views>
          <View name="TripApprovalView" selectionMode="SINGLESELECT" width="98%" supportedItemTypes="uwl.task.webflow.decision.SAP_R3_HumanResources_TS20000131" columnOrder="attachmentCount, detailIcon, subject, priority, creatorId, createdDate, dueDate, approveCol, reviseCol, rejectCol" sortby="priority:descend, dueDate:ascend" tableDesign="ALTERNATING" visibleRowCount="10" headerVisible="yes" tableNavigationFooterVisible="yes" tableNavigationType="CUSTOMNAV" actionRef="" refresh="300" dueDateSevere="86400000" dueDateWarning="259200000" emphasizedItems="new" displayOnlyDefinedAttributes="yes" actionPosition="both" referenceBundle="tasks">
               <Descriptions default="Approve Trip">
                    <ShortDescriptions>
                         <Description Language="no" Description="Godkjenning Reise"/>
                    </ShortDescriptions>
               </Descriptions>
               <DisplayAttributes>
                    <DisplayAttribute name="approveCol" type="radiobutton" actionRef="1" hAlign="CENTER">
                         <Descriptions default="Approve">
                              <ShortDescriptions>
                                   <Description Language="no" Description="Godkjenn"/>
                              </ShortDescriptions>
                         </Descriptions>
                    </DisplayAttribute>
                    <DisplayAttribute name="reviseCol" type="radiobutton" actionRef="2" hAlign="CENTER">
                         <Descriptions default="Revise">
                              <ShortDescriptions>
                                   <Description Language="no" Description="Returner"/>
                              </ShortDescriptions>
                         </Descriptions>
                    </DisplayAttribute>
                    <DisplayAttribute name="rejectCol" type="radiobutton" actionRef="3" hAlign="CENTER">
                         <Descriptions default="Reject">
                              <ShortDescriptions>
                                   <Description Language="no" Description="Avvis"/>
                              </ShortDescriptions>
                         </Descriptions>
                    </DisplayAttribute>
               </DisplayAttributes>
               <Actions>
                    
                    <Action name="submitUserDecisions" userDecision="yes" handler="UIActionHandler" referenceBundle="submit"/>
                    <Action name="refresh" userDecision="no" handler="UIActionHandler" referenceBundle="refresh">
                         <Properties>
                              <Property name="type" value="button"/>
                              <Property name="onClick" value="onForceRefresh"/>
                         </Properties>
                    </Action>
               </Actions>
          </View>
          <View name="TripCheckView" selectionMode="SINGLESELECT" width="98%" supportedItemTypes="uwl.task.webflow.decision.SAP_R3_HumanResources_TS20000135" columnOrder="attachmentCount, detailIcon, subject, priority, creatorId, createdDate, dueDate,approveCol,reviseCol" sortby="priority:descend, dueDate:ascend" tableDesign="STANDARD" visibleRowCount="10" headerVisible="yes" tableNavigationFooterVisible="yes" tableNavigationType="CUSTOMNAV" actionRef="" refresh="300" dueDateSevere="86400000" dueDateWarning="259200000" emphasizedItems="new" displayOnlyDefinedAttributes="yes" actionPosition="top" referenceBundle="tasks">
               <Descriptions default="Check Trip">
                    <ShortDescriptions>
                         <Description Language="no" Description="Kontroller Reise"/>
                    </ShortDescriptions>
               </Descriptions>
               <DisplayAttributes>
                    <DisplayAttribute name="approveCol" type="checkbox" actionRef="1" hAlign="CENTER">
                         <Descriptions default="Approve">
                              <ShortDescriptions>
                                   <Description Language="no" Description="Godkjenn"/>
                              </ShortDescriptions>
                         </Descriptions>
                    </DisplayAttribute>
                    <DisplayAttribute name="reviseCol" type="checkbox" actionRef="2" hAlign="CENTER">
                         <Descriptions default="Revise">
                              <ShortDescriptions>
                                   <Description Language="no" Description="Returner"/>
                              </ShortDescriptions>
                         </Descriptions>
                    </DisplayAttribute>
               </DisplayAttributes>
               <Actions>
                    <Action name="submitUserDecisions" userDecision="no" handler="UIActionHandler" referenceBundle="submit"/>
                    <Action name="refresh" userDecision="no" handler="UIActionHandler" referenceBundle="refresh">
                         <Properties>
                              <Property name="type" value="button"/>
                              <Property name="onClick" value="onForceRefresh"/>
                         </Properties>
                    </Action>
               </Actions>
          </View>
          <View name="TimeApprovalView" selectionMode="SINGLESELECT" width="98%" supportedItemTypes="uwl.task.webflow.SAP_R3_HumanResources_TS40007901" columnOrder="attachmentCount, detailIcon, subject, priority, creatorId, createdDate, dueDate" sortby="priority:descend, dueDate:ascend" tableDesign="STANDARD" visibleRowCount="10" headerVisible="yes" tableNavigationFooterVisible="yes" tableNavigationType="CUSTOMNAV" actionRef="" refresh="300" dueDateSevere="86400000" dueDateWarning="259200000" emphasizedItems="new" displayOnlyDefinedAttributes="yes" actionPosition="top" referenceBundle="tasks">
               <Descriptions default="Time Approval">
                    <ShortDescriptions>
                         <Description Language="no" Description="Godkjenning Tid"/>
                    </ShortDescriptions>
               </Descriptions>
               <Actions>
                    <Action name="submitUserDecisions" userDecision="no" handler="UIActionHandler" referenceBundle="submit"/>
                    <Action name="refresh" userDecision="no" handler="UIActionHandler" referenceBundle="refresh">
                         <Properties>
                              <Property name="type" value="button"/>
                              <Property name="onClick" value="onForceRefresh"/>
                         </Properties>
                    </Action>
               </Actions>
          </View>
     </Views>
</UWLConfiguration>

How to execute the job from script ??

How to execute the job from script ?? i have 2 jobs A AND B . I want to execute job B from job A'S Script ?? how can i ??

Hi Kishore,
Please refer the below link for BODS Job execution using Script
Executing a job by another job in BODS 4.1 using simple script
http://scn.sap.com/community/data-services/blog/2013/12/04/executing-a-job-by-another-job-in-bods-41-using-simple-script
Steps for executing BODS job from Unix Script with user defined global parameters
http://scn.sap.com/community/data-services/blog/2013/09/02/steps-for-executing-bods-job-from-unix-script-with-user-defined-global-parameters
Executing a job using batch file
http://scn.sap.com/thread/3503338
How to add a schedule for job2 with a condition after job 1 is finished
http://scn.sap.com/message/14523514#14523514
Scheduling BODS Jobs Sequentially and Conditionally
http://scn.sap.com/docs/DOC-34648
Thanks,
Daya

Error while executing a scenario from CMD

I am trying to execute a scenario from CMD using the starctscen command.
when I use the below command
E:\OraHome_ODI\oracledi\bin\startscen EXT_DATA 002 GLOBAL
it is executing correctly
but I tried to create a sceduler for the execution where i used the below command
C:\Documents and Settings\Desktop>"E:\OraHome_ODI\oracledi\bin\startscen.bat" EXT_DATA 002 GLOBAL
and it is giving me the following error
The system cannot find the path specified.
OracleDI: Starting scenario EXT_DATA 002 in context GLOBAL ...
'oracle.odi.Agent' is not recognized as an internal or external command,
operable program or batch file.
can someone help me on this.
Thanks,
Sri

In the batch File write this way
cd E:\OraHome_ODI\oracledi\bin
E:
startscen EXT_DATA 002 GLOBAL In case you are providing the values (EXT_DATA 002 GLOBAL) as parameter
then call the startscen this way
cd E:\OraHome_ODI\oracledi\bin
E:
startscen %1 %2 %3

Is it possible to call std. SAP transaction from abap wd

Is it possible to call std. SAP transaction from abap wd so that transaction appears and work as in gui? Without portal ofcourse.
I know that using webgui and/or ITS it is possible so then it must be somehow possible....

Hi,
see Web Dynpro ABAP call transaction in the foreground and just carry out a simple search in this forum, then you'll find several threads with similar questions...
Regards, Heidi

How to execute ODI scenario from a web application

Hi
I need to execute ODI scenario from ApEx form.
how to execute ODI scenario from application. Using 10.1.3.5.5
-app

In the SQL property of the TQuery object, enter the call as an anonymous block:
begin
pkg_name.procedure_name(true);
end;

How to execute SAP Transaction from cmd

Similar Messages

Maybe you are looking for