How to execute the functionality of button at a time of pressing if function is in continuous loop?
Hello,
I am facing one basic problem that how can I execute the button which I have used in my vi at a time of pressing means in my vi I have used 4 button 1. Start 2. OK 3. Save and 4. Stop button
when user press start button then continuous loop will be executed and after pressing OK it will stop that loop and waiting for next instruction from user whether he want to do reading operation again or he want to save or he want to stop.
The thing is when I press start button then while loop is execute then its not possible to press stop button or save button, user need to wait until OK button is pressed.
Will you please guide me how can I do so that when ever user press any button that button is executed at time.
Thank you very much once again.
Attachments:
voltageforcecapacitance without instrument.vi 40 KB
Hi Ankit,
There are some issue in your code mention below please have a look and correct these will work fine for your requirement.
1. Save button Boolean value pass to the lower wheel conditional loop means if you press save your bottom loop will stop working this is not the code requirement you have to continue loop and tigger start event in last using value tigger event property to tigger again start event.
This step will reset your loop and start from zero.
2. According to me I think both loop should stop only in stop condition so you can remove stop function from upper loop and pass the button value in both loop directly to wheel loop condition terminal.
Upper loop direct and lower both loop local variable.
3. Why you want to stop your upper loop on any error condition, you should Handel the errors and keep running the code.
4. What is the use of queue no case related with dequeue in bottom loop.
5. Wheel loop in a event is not good practice so you can use your queue structure here to run continuous lower code.
I hope these changes can improve your code.
Thanks and Regards
Himanshu Goyal | LabVIEW Engineer- Power System Automation
Values that steer us ahead: Passion | Innovation | Ambition | Diligence | Teamwork
It Only gets BETTER!!!
Similar Messages
-
How to use the cases in button action?
Hi Experts,
I want to get a prompt message if the field is empty.I got it but at the same time if the field is filled I want the other action to be performed that is to call a BAPI and give me output.How can I give two events for the same action.
How to use the cases in button action?
So, please guide me.Urgent need
Regards
NutanHi Nutan,
if I understand you, then you have a simple validation. Therefore you can use the validation functionality of VC for your components. An alternative could be by writing a new ABAP RFC function module like:
BAPI Input parameters as input and BAPI output parameters as output and an additional return code or string for a message:
IF I_FIELD IS INITIAL.
E_RETURN_CODE = "THE FIELD IS EMPTY."
ELSE.
CALL FUNCTION <YOUR_BAPI>
<BAPI PARAMETERS>
ENDIF.
I hope that helps.
Best Regards,
Marcel -
How to execute the content of varchar variable like a simple query
Hi everyone!
I did a PL/SQL region in apex, in this region I did the query which is storaged in a variable; it was did it concatenate several times,
in the procedure I have several sentences.
I thought that the command 'execute immediate' would get a good result but it do not print the result.
declare
variable varchar2(1000);
begin
--sentences
--execute inmmediate( variable );
--return variable
end;
I only want to how to execute the content of varchar variable.
For example, suppose that the result of this procedure is
'SELECT SYSDATE FROM DUAL'
How and what do I must do for this query execute like a normal query that is in apex?
I expect your prompt reply.
Thank you for your help.
Best regardsLet us say your table containing SQL is
t_sql_table
and has two columns
primary_key
and
sql_query.
You would need to do the following:
1. Create a Report of type "Function returning SQL Query"
2. Put the following there:
DECLARE
v_query VARCHAR2 (4000);
BEGIN
SELECT sql_query
INTO v_query
FROM t_sql_table
WHERE primary_key = 1;
RETURN v_query;
END;Denes Kubicek
http://deneskubicek.blogspot.com/
http://www.opal-consulting.de/training
http://apex.oracle.com/pls/otn/f?p=31517:1
------------------------------------------------------------------- -
How to execute the logical database.
how to execute the logical database.
There are two ways of using a logical database - either by linking it with the executable program(specify the LDB name in the program attributes) or by using the function module LDB_PROCESS.
1.Data read by the logical database is passed back to the program using the interface work areas.Use GET statements in the report.
GET events are implemented internally as FORM routines.
2.If you call the logical database using the above function module, the selection screen of LDB is not displayed.It uses special subroutines called callback routines, which are called by the function module and filled with the required data.
Please refer the following link for more details.
http://help.sap.com/saphelp_nw70/helpdata/en/9f/db9b5e35c111d1829f0000e829fbfe/frameset.htm -
How to execute the FM K_COSTS_PLAN_INTERFACE_TOTAL with ranges
Hi All,
can anybody suggest me, how to execute the Function module K_COSTS_PLAN_INTERFACE_TOTAL with range of Cost element(KSTAR)
and what is the field for Cost Element TO
The fm is for tcode KP06
Edited by: Kachi Reddy on Feb 17, 2012 2:26 PMHi, Kachi.
Try this example:
REPORT rkkipl1t.
* The parameters are used to fill the internal table and describe the
* planning object.
PARAMETERS: p_kokrs LIKE tka01-kokrs MEMORY ID cac OBLIGATORY,
p_perab LIKE cobk-perab DEFAULT '001' OBLIGATORY,
p_perbi LIKE cobk-perbi DEFAULT '012' OBLIGATORY,
p_gjahr LIKE cobk-gjahr MEMORY ID gjr OBLIGATORY,
p_versn LIKE cobk-versn MEMORY ID kvt OBLIGATORY,
p_kostl LIKE cssl-kostl OBLIGATORY,
p_kstar LIKE cskb-kstar OBLIGATORY,
p_vrgng LIKE cobk-vrgng DEFAULT 'RKP1' OBLIGATORY,
p_kwaer RADIOBUTTON GROUP ein DEFAULT 'X',
p_owaer RADIOBUTTON GROUP ein,
p_twaer RADIOBUTTON GROUP ein,
p_waers LIKE coss-twaer.
DATA: i_rku01_cur LIKE rku01_cur.
* internal table for function
DATA: itrku01g TYPE TABLE OF rku01g WITH HEADER LINE.
REFRESH itrku01g.
PERFORM fill_itrku01g.
* Which currency is to be used?
IF p_twaer = 'X'.
* planning in transaction currency
i_rku01_cur-wtg_man = p_twaer.
i_rku01_cur-wtf_man = p_twaer.
ELSEIF p_owaer = 'X'.
* planning in object currency
i_rku01_cur-wog_man = p_owaer.
i_rku01_cur-wof_man = p_owaer.
ELSE.
* planning in controlling area currency
i_rku01_cur-wkg_man = 'X'.
i_rku01_cur-wkf_man = 'X'.
ENDIF.
CALL FUNCTION 'K_COSTS_PLAN_INTERFACE_TOTAL'
EXPORTING
* BLTXT = ' '
* COMMIT = 'X'
* DELTA = ' '
gjahr = p_gjahr
kokrs = p_kokrs
messages_show = 'X'
perab = p_perab
perbi = p_perbi
update_values = 'X'
versn = p_versn
vrgng = p_vrgng
* ONLINE_VB = ' '
irku01_cur = i_rku01_cur
* TESTMODE = ' '
* KEEP_TWAER = ' '
TABLES
irku01g = itrku01g
EXCEPTIONS
messages_occured = 1
OTHERS = 2
IF sy-subrc = 0.
MESSAGE s000(15).
* Verbuchung wurde erfolgreich durchgeführt
ENDIF.
* FORM FILL_ITRKU01G
FORM fill_itrku01g.
* fill internal table for function
CLEAR itrku01g.
itrku01g-kostl = p_kostl. "for CCA planning
itrku01g-kstar = p_kstar. "must be filled
itrku01g-wtgbtr = 12000. "value when planning
itrku01g-wkgbtr = 12000. "value when planning
itrku01g-wogbtr = 12000. "value when planning
itrku01g-twaer = p_waers. "transaction currency
itrku01g-fcwkg = '1'. "distribution key must be filled
itrku01g-fcwkf = '1'. "must be filled
itrku01g-fcwkv = '1'. "must be filled
itrku01g-fcmeg = '1'. "must be filled
itrku01g-fcmef = '1'. "must be filled
itrku01g-fcmev = '1'. "must be filled
APPEND itrku01g.
ENDFORM. "FILL_ITRKU01G.
Best regards,
George Shlyahov. -
The wi-fi button on my iPad 2 is not functioning. I have tried resetting the network, worked for 5 minutes. Am not able to connect to internet to reset to factory. What else can I do?
Try this - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.) No data/files will be erased. http://support.apple.com/kb/ht1430
Some things to try first:
1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at
http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
4. Go into your router security settings and change from WEP to WPA with AES.
5. Renew IP Address: (especially if you are drooping internet connection)
• Launch Settings app
• Tap on Wi-Fi
• Tap on the blue arrow of the Wi-Fi network that you connect to from the list
• In the window that opens, tap on the Renew Lease button
6. Potential Quick Fixes When Your iPad Won’t Connect to Your Wifi Network
http://ipadinsight.com/ipad-tips-tricks/potential-quick-fixes-when-your-ipad-won t-connect-to-your-wifi-network/
~~~~~~~~~~~~~~~~~~~~~~~~~
Fix WiFi Issue for iOS 7
http://ipadnerds.com/fix-wifi-issue-ios-7/
iOS 6 Wifi Problems/Fixes
Wi-Fi Fix for iOS 6
https://discussions.apple.com/thread/4823738?tstart=240
How To: Workaround iPad Wi-Fi Issues
http://www.theipadfan.com/workaround-ipad-wifi-issues/
Another Fix For iOS 6 WiFi Problems
http://tabletcrunch.com/2012/10/27/fix-ios-6-wifi-problems-ssid/
Wifi Doesn't Connect After Waking From Sleep - Sometimes increasing screen brightness prevents the failure to reconnect after waking from sleep. According to Apple, “If brightness is at lowest level, increase it by moving the slider to the right and set auto brightness to off.”
Fix For iOS 6 WiFi Problems?
http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
iOS 6 iPad 3 wi-fi "connection fix" for netgear router
http://www.youtube.com/watch?v=XsWS4ha-dn0
Apple's iOS 6 Wi-Fi problems
http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
~~~~~~~~~~~~~~~~~~~~~~~
iPad: Issues connecting to Wi-Fi networks
http://support.apple.com/kb/ts3304
How to Boost Your Wi-Fi Signal
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Boost-Your-Wi-Fi-Signal.hmL
Troubleshooting a Weak Wi-Fi Signal
http://ipad.about.com/od/iPad_Troubleshooting/a/Troubleshooting-A-Weak-Wi-Fi-Signal.htm
How to Fix a Poor Wi-Fi Signal on Your iPad
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-O n-Your-iPad.htm
iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
How to Fix: My iPad Won't Connect to WiFi
http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Connect iPad to Wi-Fi (with troubleshooting info)
http://thehowto.wikidot.com/wifi-connect-ipad
10 Ways to Boost Your Wireless Signal
http://www.pcmag.com/article2/0,2817,2372811,00.asp
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
Some Wi-Fi losses may stem from a problematic interaction between Wi-Fi and cellular data connections. Numerous users have found that turning off Cellular Data in Settings gets their Wi-Fi working again.
You may have many apps open which can possibly cause the slowdown and possibly the loss of wifi. In iOS 4-6 double tap your Home button & at the bottom of the screen you will see the icons of all open apps. Close those you are not using by pressing on an icon until all icons wiggle - then tap the minus sign. For iOS 7 users, there’s an easy way to see which apps are open in order to close them. By double-tapping the home button on your iPhone or iPad, the new multitasking feature in iOS 7 shows full page previews of all your open apps. Simply scroll horizontally to see all your apps, and close the apps with a simple flick towards the top of the screen.
Wi-Fi or Bluetooth settings grayed out or dim
http://support.apple.com/kb/TS1559
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
Cheers, Tom -
How to enable the print & archive button that appear in the smartform outpu
How to enable the print & archive button that appear in the smartform output.....
Hi,
I agree with the details which has been given above, but still if you want to default option 3 "Print & Archive" in drop down, it is possible.
All you need to do is to set the value of output_options structure field "TDARMOD" as "3" while passing the parameters to dynamic function module of smartform.
That will select "Print and Archive" in background and display to user.
Sumit -
I am trying to set up my newly purchased Apple TV but when I enter my network password while setting up, I am not able to enter the Submit button, any idea how to hit the visible submit button that is visible on screen but not responding?
You need to use the right arrow on the remote to go all the way to the right. The submit button will be highlighted and you can then press select on the remote to proceed.
-
Workflow Questions - How to execute the steps in a workflow automatically?
I am using MDM 5.5 SP6.
My Question is how to execute the steps in the workflow automatically. That means NO user interaction.
I have a simple workflow, Start- Process -- Syndicate - Stop.
When a new record added /updated/inserted this workflow will start automatically. The workflow inbox, the workflow status is u2018Receivedu2019 Step is u2018Processu2019. Now I have to right click on the record then u2018Next Stepu2019 then click on u2018Syndicateu2019 then workflow completes automatically.
How to execute the Syndication step automatically?. I donu2019t want to have any user interaction to syndicate these records.
Is this possible?
The reason for this is I want to do some field validation and based on the field validation some assignments then then I want to syndicate these records without user interaction..Hi,
If you want to do some validations and then based on result assignments on some of the fields before syndicating, then you have to use workflow. Only syndication server will not fulfill this requirement.
you may try by making validation's automatic property as "Error". This way it will not allow to add any record not fulfilling validation. You can also try using calculated fields instead of assignment.
I am not sure if you can make your workflow fully automatic, because atleast one process step is must for any workflow, and process step means user action.
Regards,
Shiv -
How to use the standrad Refresh button in ooalv Grid?
Hai Experts ,
i write editable oo alv program its works fine. when change the data
then click save button its saved correctly, but the problem is totals of row & column not refresh when i am click the
Refresh button . Please Help how to handle the standard Refresh button in ooalv .
Thanks
Adv....thank q u for ur reply,
when i edit the data in grid and save the data its saved successful,
but the problem is manually i calculating the totals at the end of the Row as well as at end of the columns,
when i edit the data in Grid that totals are not effected for that im using the Standard Refresh button ,
Plz help me. -
How to execute the data in the form when the data is already avaliable
Hi,
I am working with forms 6i. I have a problem while executing the data in the form
Actually, the data is already present in the form. But when i run the form, the data is not displayed.
can anyone please help me how to execute the data. below is the code
Set_Alert_Property(alert_id,ALERT_MESSAGE_TEXT,'Do you want to refresh new Data for that Year and Field ? (it will take a time).') ;
SET_ALERT_BUTTON_PROPERTY(alert_id, ALERT_BUTTON1, LABEL, 'Yes');
SET_ALERT_BUTTON_PROPERTY(alert_id, ALERT_BUTTON2, LABEL, 'No');
SET_ALERT_BUTTON_PROPERTY(alert_id, ALERT_BUTTON3, LABEL, 'Cancel');
button_number :=Show_Alert(alert_id) ;
synchronize;
if button_number != ALERT_BUTTON3 then
if button_number = ALERT_BUTTON1 then
:param.field := :control.f_cd;
:param.year := :control.year;
build_tables;
fields;
-- areas(:param.field);
PUT_PARAM;
COMMIT_FORM;
go_block('wet_criterias');
end if;
if button_number = ALERT_BUTTON2 then
:exhibits.field_display := :control.f_name || ' - Exhibits';
go_block('RESERVOIR');
execute_query;
end if;
end if;
end if;
else
message('Fields must be entered...');
end if;
else
message('Fields must be entered...');
end if;It's hard to know what logic you are trying to implement.
However, by looking at your code, it seems that if the user select 'Yes' to the question "Do you want to refresh", nothing is done except the go_block('wet_criterias'). Should there be an 'Execute_Query' ?
No idea... -
How to execute the parametered stored procedure in sql *plus ?
how to execute the parametered stored procedure in sql *plus ?
my storedprocedure format
CREATE OR REPLACE PROCEDURE SMS_SELECTMPLOYEE
(empDOB out date, empEmpName out varchar2)
thanks & regards
mk_murOh, sorry... making many reading-too-fast mistakes today...
You can't declare date variables in SQL*Plus (seel help var), but you can cast to varchar2:
TEST> CREATE OR REPLACE PROCEDURE SMS_SELECTMPLOYEE (empDOB out date, empEmpName out varchar2) IS
2 d date := sysdate;
3 e varchar2(10) := 'bob';
4 begin
5 empdob := d;
6 empempname := e;
7 end;
8 /
Procedure created.
TEST> var d varchar2(30)
TEST> var n varchar2(30)
TEST> call SMS_SELECTMPLOYEE(:d,:n);
Call completed.
TEST> print d n
D
11/07/06
N
bobYoann. -
Can anyone tell me how to access the sync apps button please? I used to be able to select it but it is no longer visible.
You have to connect and select iPhone in computer iTunes Sidebar.
If you don't see the Sidebar, toggle it on in iTunes menu View > Show Sidebar.
Take a look at this screenshot on updating apps. -
How to disable the select options button, while audio is playing in the question template in captivate 8?
Apologies for late reply.
I mean "On Question screens audio keeps on playing even after we have selected an option or options depending on the question type and clicked Submit. How do we stop the audio on selecting an option?" -
How to execute the method of a class loaded
Hi,
I have to execute the method of com.common.helper.EANCRatingHelper" + version
version may be 1,2, etc
if version = 1 the class is com.common.helper.EANCRatingHelper1;
Iam able to load the class using following code.But iam unable to execute the method of the above class
Can anybody help me how to execute the method of the class loaded.
Following is the code
String version = getHelperClassVersion(requestDate);
String helperClass = "com.redroller.common.carriers.eanc.helper.EANCRatingHelper" + version;
Class eancRatingHelper = Class.forName(helperClass);
eancRatingHelper.newInstance();
eancRatingHelper.saveRating(); This is not executing throwing an error no method.
ThankseancRatingHelper.newInstance();Ok, that creates an instance, but you just threw it away. You need to save the return of that.
Object helper = eancRatingHelper.newInstance();
eancRatingHelper.saveRating(); This is not executing throwing an error no method.Of course. eancRatingHelper is a Class object, not an instance of your EANCRatingHelper object. The "helper" object I created above is (though it is only of type "Object" right now) -- you have to cast it to the desired class, and then call the method on that.
Hopefully EANCRatingHelper1 and 2 share a common interface, or you're up the creek.
Maybe you are looking for
-
Upload Manual bank statement with business area
Hi Gurus, Business area is required field. While uploading manual bank statement through ff67, how can system identify the correct business area? Is there any option in which we dont have to enter business area manually while uploading? Please revert
-
I would like to align them too.
-
Problem in installing Matlab on lion
hi guys i want to install matlab r2011a on lion but when i click on app icon it actives on the dock after some seconds it stops giggling and nothing happens after I click on it it disappear normally it ahould open a window to install software but th
-
Secondary Axis Label in Combination Chart
Hi Everyone, I´m trying to make a Pareto Diagram with a Combination Chart, but I need a secondary Y axis for my cumulative frecuency. Is that possible??? Thanks in advance.
-
OS X 10.5.3 update... Does Time Machine over network still work
Anyone updated to the new 10.5.3 and know if Time Machine still works over the network via AEBS?