How to exit BlackBerry id

How to exit BlackBerry id account and enter new id?

You have to do a security wipe on the phone in order to enter a new BlackBerry ID.
To do this, swipe down on the homescreen and follow Settings>Security and Privacy>Security Wipe and follow the instructions.
I hope that helps you.
- If my response has helped you, please click "Options" beside my post and mark it as solved. Clicking the "thumbs up" icon near the bottom of my response would also be appreciated.

Similar Messages

How to maximize blackberry flash memory

Hİ all,
how to maximize blackberry flash memory?
examp: 9000 internal memory 1gb
but only we can use 256 mb for messages
best regard
Blackberry support teams in linkedin ...join
http://www.linkedin.com/groups?home=&gid=2785187&trk=anet_ug_hm
For Russian
http://www.linkedin.com/groups?gid=3183812&trk=anetsrch_name&goback=.gdr_1278482273982_1
Solved!
Go to Solution.

Hello!
There are three types of potential memory on a BB: 1) Application Memory, 2) Device Memory, and 3) Media/SD Card Memory
Application Memory -- This is the most crucial; it is the protected (not user accessible), dedicated, and fixed (in size) space that is available as the destination for the installation of applications (plus some application storage, overhead and such). You cannot touch AppMemory. You cannot improve the maximum AppMemory that your BB has. It is what it is. Applications can only install here...there is no option.
Device Memory -- This is space on your BB that you can touch to store files, pictures, media, etc. Typically, it is not terribly large, but it is available to you.
SD/Media Card Memory -- This is what it says...your SD card, for you to store files, media, pictures, etc. It can be as large as your BB OS can support...see this KB:
http://www.blackberry.com/btsc/KB05461
On some devices/OS levels, you can only see "File Free" (Options > Status), which I think is equivalent to AppMemory. On other devices, you can see all three memory usage levels (Options > Memory). Here are some guidelines to use:
http://www.blackberry.com/btsc/KB15345
http://www.blackberry.com/btsc/KB14320
http://www.blackberry.com/btsc/KB14213
Lastly, it is always important to properly close applications when you are done with them. Using the Back or the Red key will not do this -- those leave it to the app to decide what to do...and some will leave themselves resident in memory, consuming resources on your BB, slowing the overall performance. Rather, to close an app, press and select "Close" or "Exit"...that will force the application to be closed, freeing up for your new use the resources it was consuming. Some apps will always remain running (typically -- BBMessenger, Browser, Homescreen, Phone, and Messages)...but, you should still close them properly - especially the Browser...if it is left on an active web page, it will not only consume extra resources but battery power as well.
Further, anytime random strange behavior or sluggishness creeps in, the first thing to do is a battery pop reboot. With power ON, remove the back cover and pull out the battery. Wait about a minute then replace the battery and cover. Power up and wait patiently through the long reboot -- ~5 minutes. See if things have returned to good operation. Like all computing devices, BB's suffer from memory leaks and such...with a hard reboot being the best cure. Some have taken to doing this on a regular basis as a preventive measure...some as frequently as once per day. Others have obtained the QuickPull app to automate a simulated Batt-Pull.
Best!
Good luck!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

How to exit full screen mode mail message

Inexplicably, when i open messages in Mail, they appear in something like full screen mode. The message viewer window is not in full screen mode, but if i open any message, the message takes up the whole screen. I can drag the message in order to see other things on the desktop, but i can't adjust the size of the window to the size i want, and see no way of exiting full screen mode. I lookd in Help, but it only shows how to enter Full Screen, not how to exit it.
In the View menu, there is an option to enter full screen. When i have the full screen sized message open on top, the enter full screen option in the View menu is greyed out. If i have the normal sized window for the message viewer window on top, the enter full screen is not grayed out and could be selected. I do not select it since there appears to be no 'exit full screen' option that i can see and i don't want to multiply this problem.
I know this might be a silly question, but if they have an enter full screen option, why wouldn't they also have an exit full screen option?
Or is there an exit full screen option which exists somewhere that i have not been able to find? I've searched Apple Discussions and Google but so far have not found a way to un-full screen my Mail messages. This started this morning.
Can anyone help?
I do not know how it got into full screen mode. It was not something i did deliberately or knowingly.
i have tried quitting and restarting Mail but the full screen message mode returns.
How can i get my mail messages out of this very annoying and awkward screen hogging mode?
I have only been using Mail since last November when i got a new MBP with Mountain Lion, which meant that for the first time since 1995, i could not use the simple straightforward faultless Eudroa anymore. So i have had my struggles with Mail. Trying to get through it. This is the most recent of various similar issues, inexplicable problems without apparent solutions. Sort of Microsoft-like.
I will be really grateful for any help.. thanks

Press Control + Command + F on your keyboard to enter or exit full screen mode.

Update Rule Routine - How to exit or go to end

I have a routine where I have a bunch of IF/END IF sections. I would like to know how to exit the routing from within one of these sections OR go to the end of the routine?
For example;
IF CONDITION1
   RESULT = COMM_STRUCTURE-creditor.
   EXIT ROUTINE OR GO TO END
ENDIF.
IF CONDITION2
   RESULT = COMM_STRUCTURE-debitor.
   EXIT ROUTINE OR GO TO END
ENDIF.
END
I know I can probably structure the IF statements so that they are nested in a way to avoid this but this example I give is simple but I have MANY IF statements and my code is a bit more complicated. I'm looking for an easy way to exit the routine...
Thanks!

Hi Patrick!
If you don't want to modify the structure of your routine...you can add for every if-clause (at each conditon) a check on to a flag.
Example:
CLEAR FLAG.
IF FLAG = 'X'.
IF CONDITION1.
RESULT = COMM_STRUCTURE-creditor.
FLAG = 'X'.
ENDIF.
ENDIF.
IF FLAG = 'X'.
IF CONDITION2.
RESULT = COMM_STRUCTURE-debitor.
FLAG = 'X'.
ENDIF.
ENDIF.
Hope it helps!
Bye,
Roberto

How does a BlackBerry handheld connect to BES for the first time?

How does a Blackberry device connect to BlackBerry Enterprise Server (BES) for the first time? Is there a risk that a rogue BlackBerry handheld connects to BES?
Thank you in advance!

Hi and Welcome to the Forums!
When a BES admin sets up a BB on BES, they configure the unique BB PIN into their BES and also create credentials that are required to actually complete the registration process on the BB. So, while there is no perfect security anywhere, I don't think the risk you are concerned about is high enough to warrant any attention.
Good luck!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

How to exit from a WebDynpro ABAP application and open another url

Hi Friends,
How to exit from a WebDynpro ABAP application and open another url like (www.yahoo.com) in the same window of the WD4 application on click of a Button?
Regards,
Xavier

Hi,
First of all you should create outbound plug in the window you are trying to exit with plufg type "Exit"
Then create method handler in the view with this code
        data lo_view_cntr type ref to if_wd_view_controller.
        data lo_win_cntr type ref to if_wd_window_controller.
        data: l_parameter_list type wdr_event_parameter_list,
              l_parameter type wdr_event_parameter,
              l_val type ref to data,
              l_val_url type REF TO data.
        field-symbols: <fs> type any,
                       <fs_url> type any.
        lo_view_cntr = wd_this->wd_get_api( ).
        lo_win_cntr = lo_view_cntr->get_embedding_window_ctlr( ).
        CREATE DATA l_val type c.
        CREATE DATA l_val_url type string.
        ASSIGN l_val->* to <fs>.
        ASSIGN l_val_url->* to <fs_url>.
        <fs> = 'X'.
        <fs_url> = 'http://your-link.com'.
        l_parameter-name = 'URL'.
        l_parameter-value = l_val_url.
        INSERT l_parameter INTO TABLE l_parameter_list.
        lo_win_cntr->if_wd_view_controller~fire_plug( EXPORTING plug_name = 'EXIT_PLUG'
                                                                parameters = l_parameter_list ).
      You can easily change this logic to exit application instead of redirecting to the site
       just changing to
       l_parameter-name = 'CLOSE_WINDOW'.

How to exit from a loop on 2 different conditions

Hello Experts
I’m trying to write a procedure in which I’m taking PROVINCE as an input parameter. All the provinces are stores in a table. I’m using a cursor and rowtype variable to check the province. After I finds province I displays province and its code. Everything works fine expect when I don’t find the province. I’m not sure how to exit from loop if I don’t find the province. I already uses exit when condition. I was expecting else condition should work and should exit from the loop but it doesn’t. Can please somebody show me how to exit if I don’t find province in the table through cursor.
Here is my code
set serveroutput on
variable G_TAX varchar2(10)
CREATE OR REPLACE PROCEDURE p_create(i_state VARCHAR2)is
CURSOR cur_bb_tax is
select * from bb_tax;
bb_tax_details bb_tax%rowtype;
begin
if not cur_bb_tax%isopen then
open cur_bb_tax;
end if;
loop
fetch cur_bb_tax into bb_tax_details;
if (bb_tax_details.state = i_state) then
dbms_output.put_line(bb_tax_details.state || bb_tax_details.idstate);
end if;
exit when bb_tax_details.state = i_state;
end loop;
close cur_bb_tax;
exception
when others then
dbms_output.put_line(SQLERRM);
end;
Thanks in advance

Hello,
Why don't you use dbms_output.Put_line and print output to find why logic is not able to execute? Maybe upper case/lower case/whitespace. *Also put your code between \ to preserve formatting*.
Regards

How to exit fullscreen?

Okay this might sound stupid but I have my Mac since Monday now and I don't have any idea how to exit the fullscreen mode when playing a game. For example I was playing EVE Online the other day (in fullscreen mode) and wanted to check something on my Skype, but couldn't because I wasn't able to exit the fullscreen mode and go to the desktop. I'm using the Macbook Pro at the moment. So if anybody could help me out with that, I'd really appreciate it.
Thank you!

That will be game-dependent. I've played some games that won't release the system. Some will work with Cmd+tab. Others will do so with 'esc' as Carolyn mentioned. You may need to check the game documentation to see what you must do.

How does EXIT modules in DMEE work?

Dear friends, how does EXIT modules in DMEE work?
If I want to use this module DMEE_EXIT_DK_OCR_ACCOUNTNO to extract the account number of an OCR line, what should I do?
And especially what do I put in the import parameters?
/René

The module called DMEE_EXIT_DK_OCR_ACCOUNTNO is a dummy module or template module if you like.
The problem is that the module DMEE_EXIT_DK_OCR_ACCOUNTNO has a condition that never where fulfilled!
I copied the module to Z_DMEE_EXIT_DK_OCR_ACCOUNTNO and changed the conditions u2013 and then everything was working with import and export parameters!
Either is DMEE_EXIT_DK_OCR_ACCOUNTNO a serious mistake in standard SAP or just an undocumented template to be modified!
/René

Can anyone tell me how to exit full-screen mode in mail?

Can anyone please tell me how to exit full-screen mode in mail?

Thanks, QuickTimeKirk.
It was getting really frustrating being locked into that big screen!

How to exit zenmicro recovery mo

Help! My zen microphoto was working just fine this afternoon, but when I got home and turned it on I found it in 'recovery mode' and I don't know how to exit this. I tried clean up and reboot, but neither made any difference. What should I do?

It sounds like it's stuck in Recovery Mode then. Connect the player to your PC, and see if it's picked up. If it is, you can try loading the firmware update (available on the Downloads page).
Cat

How to exit internet explorer browser

Can somebody tell me how to exit internet explorer without backing out through my current session's entire browsing history?
Solved!
Go to Solution.

Hmmm, four taps to exit the web browser cleanly. Still, it does the job
Thanks!

How to exit iP5s blue screen without PC/Mac ?

How to exit iP5s blue screen without PC/Mac ?

Hi,
Did you create a new GUI status and used SET PF-STATUS to display it...
Or if you are using standard status..in which event are you capturing the value entered in the INPUT box..
Thanks,
Naren

How to exit from recovery mode iPad

Hello. I was trying to update my ipad 4 and it went to recovery mode and basically is locked. Cant' do anything with it. Does anybody knows how to exit recovery mode?

EXIT RECOVERY MODE
1. Turn off iPad
2. Turn on computer and launch iTunes (make sure you have the latest version of iTune)
3. Plug USB cable into computer's USB port
4. Hold Home button down and plug the other end of cable into docking port.
DO NOT RELEASE BUTTON until you see picture of iTunes and plug
5. Release Home button.
ON COMPUTER
6. iTunes has detected iPad in recovery mode. You must restore this iPad before it can be used with iTunes.
7. Select "Restore iPad"...
Note:
1. Data will be lost if you do not have backup
2. You must follow step 1 to step 4 VERY CLOSELY.

How to exit from real racing 3?

Hi,
I have installed Real racing3 in my iphone 5s. after some gaming I wanted to exit from it but couldn't find an exit option. And now I still can't find it to competely exit from it. May someone please say me how to exit?
Thanks.

Double tap the Home button...slide the last used view of the app up...above the app icon. Tap Home button when finished.

How to exit BlackBerry id

Similar Messages

Maybe you are looking for