How to exit from popup screen

Hi,
Please give me guidence for below problem.
I have report and when it executes ALV is displyaed and in the alv if the user select the push button one popup will be displayed.In the popup two pushbuttons and if the user select CANCEL the popup should be cancelled and it must show the alv ouptu(previuos one).If i have tried with LEAVE program then it is coming out from program but i want ALV output.I have tested with LEAVE TO SCREEN 0 , and LEAVE TO LIST PROCESSING but no use.
Thanks and regards,
shyla

HI,
U HAVE A PROBLEM WITH PUSHBUTTON
FOR THE ""CANCEL "" BUTTON
LEAVE TO SCREEN/PROGRAM IS GOING TO DO WHAT U WANT
ONCE U CHECK THE ATRIBUTES OF CANCEL BUTTON IN LINE EDITOR
THERE SOME FIELD CALLED ""FUNCTYPE""
BUT IT SHOULD BE GIVEN VALUE "" E""
IT HAS OPTIONS LIKE E,SPACE,,,,, ETC
USE THAT & CHECK IT ONCE IT WIL WORK

Similar Messages

How can I exit from full-screen View?

On the View menu, I clicked "Full screen View", but then I couldn't find any way back to normal view. I had to Force-Quit Firefox to escape.
How do you exit from Full Screen View?
(I tried Esc, Ctrl-C, and many other key combinations)
Thanks, PeterR

Try F11.

How to exit from the button test in diagnostic mode

Hi,
I am having some trouble with my ipod 7th gen.
First my lightning cable wont be recognize. show the error Accesory incompatible.
I try to solve the problem cleaning the golden pins in the cable and in the ipod. Don't work
I enter in diagnostic mode in my ipod and I get stucked in the button counter test..
In the screen appear a mesage 'Please reset the unit to end'. I don't know how to reset the unit
I press any button and only increase the counter for every button.
First how acan exit from the button counter test and how can fix the issue with the lightning cable

Your problem is that you are trapped inside an event case. It is not a good idea to run extended code inside event cases, else the event structure cannot service other events.
Why don't you use the outer loop for everything? Now things don't step on each others toes. What good is an event structure if it cannot react at all times???
Message Edited by altenbach on 07-25-2008 12:26 AM
LabVIEW Champion . Do more with less code and in less time .
Attachments:
event_problemMOD.vi ‏17 KB

How to exit from a WebDynpro ABAP application and open another url

Hi Friends,
How to exit from a WebDynpro ABAP application and open another url like (www.yahoo.com) in the same window of the WD4 application on click of a Button?
Regards,
Xavier

Hi,
First of all you should create outbound plug in the window you are trying to exit with plufg type "Exit"
Then create method handler in the view with this code
        data lo_view_cntr type ref to if_wd_view_controller.
        data lo_win_cntr type ref to if_wd_window_controller.
        data: l_parameter_list type wdr_event_parameter_list,
              l_parameter type wdr_event_parameter,
              l_val type ref to data,
              l_val_url type REF TO data.
        field-symbols: <fs> type any,
                       <fs_url> type any.
        lo_view_cntr = wd_this->wd_get_api( ).
        lo_win_cntr = lo_view_cntr->get_embedding_window_ctlr( ).
        CREATE DATA l_val type c.
        CREATE DATA l_val_url type string.
        ASSIGN l_val->* to <fs>.
        ASSIGN l_val_url->* to <fs_url>.
        <fs> = 'X'.
        <fs_url> = 'http://your-link.com'.
        l_parameter-name = 'URL'.
        l_parameter-value = l_val_url.
        INSERT l_parameter INTO TABLE l_parameter_list.
        lo_win_cntr->if_wd_view_controller~fire_plug( EXPORTING plug_name = 'EXIT_PLUG'
                                                                parameters = l_parameter_list ).
      You can easily change this logic to exit application instead of redirecting to the site
       just changing to
       l_parameter-name = 'CLOSE_WINDOW'.

How to exit from a loop on 2 different conditions

Hello Experts
I’m trying to write a procedure in which I’m taking PROVINCE as an input parameter. All the provinces are stores in a table. I’m using a cursor and rowtype variable to check the province. After I finds province I displays province and its code. Everything works fine expect when I don’t find the province. I’m not sure how to exit from loop if I don’t find the province. I already uses exit when condition. I was expecting else condition should work and should exit from the loop but it doesn’t. Can please somebody show me how to exit if I don’t find province in the table through cursor.
Here is my code
set serveroutput on
variable G_TAX varchar2(10)
CREATE OR REPLACE PROCEDURE p_create(i_state VARCHAR2)is
CURSOR cur_bb_tax is
select * from bb_tax;
bb_tax_details bb_tax%rowtype;
begin
if not cur_bb_tax%isopen then
open cur_bb_tax;
end if;
loop
fetch cur_bb_tax into bb_tax_details;
if (bb_tax_details.state = i_state) then
dbms_output.put_line(bb_tax_details.state || bb_tax_details.idstate);
end if;
exit when bb_tax_details.state = i_state;
end loop;
close cur_bb_tax;
exception
when others then
dbms_output.put_line(SQLERRM);
end;
Thanks in advance

Hello,
Why don't you use dbms_output.Put_line and print output to find why logic is not able to execute? Maybe upper case/lower case/whitespace. *Also put your code between \ to preserve formatting*.
Regards

How to exit iP5s blue screen without PC/Mac ?

How to exit iP5s blue screen without PC/Mac ?

Hi,
Did you create a new GUI status and used SET PF-STATUS to display it...
Or if you are using standard status..in which event are you capturing the value entered in the INPUT box..
Thanks,
Naren

How to exit from the loop

loop at itab.
if <CONDITION>
<EXIT LOOP>
endif
endloop.
this ths condition , pz tel how to exit from loop

Hi
Loop
statements
EXIT
Endloop.
Will comes out of the loop.
Regards,
Sreeram Kumar.Madisetty

How to exit from whileloop with Timing Delay

Hello;
How to exit from forwhile with timing wait (10s) before finish 10s by stop botem;
exemple ; first impulsion to start a while loop with 10 s wait ,before finsh a 10s second impulsion to stop the while loop; in labview 2010
best regrds
Forza Juventus

Show us the code you currently have. Just repeating your specification word-for-word is not going to help us to understand you problem.
There are only two ways to tell somebody thanks: Kudos and Marked Solutions
Unofficial Forum Rules and Guidelines

How to exit from loop after 3 time

hi
how to exit from loop after 3 time
loop at itab.
<exit after 3 time>
endloop.
thanks

Hi,
You can check the value of SY_TABIX inside loop,
For Example:
Loop at itab.
if sy-tabix = 3.
Exit.
endif.
Endloop.
Hope it helps
Regrds
Mansi

How to Exit from Session by executing program

How to Exit from Session by executing program

Hi,
Try the following
CALL the function module HLP_MODE_CREATE and pass '/nex' to tcode import parameter.
Regards,
Sesh
Message was edited by: Seshatalpasai Madala

How to exit from recovery mode?

how to exit from recovery mode?

You could try a hard reset
- hold the home button and the sleep/wake button down at the same time
- the phone will turn off, when the apple logo appears release both buttons
More than likely after this you will still be in recovery mode. If so then you would need to restore the phone through itunes on a pc/mac.
Hope this helps

Data is not saving in to DB from POPUP screen.

Hi,
I am opening a popup screen on button click and On the popup screen, I have added the VO as form with submit button.
On the popup fetchlistener, I calling a bean method to invoke the createInsert action as follows.
public String createSubs() {
System.out.println("Inside Action Event*********************");
try{
AdfFacesContext adf = AdfFacesContext.getCurrentInstance();
BindingContainer bc = getBindings();
oracle.binding.OperationBinding opb = bc.getOperationBinding("Create");
opb.execute();
}catch(Exception e){
e.printStackTrace();
return "";
public BindingContainer getBindings() {
return BindingContext.getCurrent().getCurrentBindingsEntry();
When I am clicking on submit button in popup screen, data is appearing on the mainpage table but the same is not saving in the database. One more I have observed that doDML is not calling means SOP's are not comming from doDML method in the entity class.
Please do the needful, its an urgent issue to reslove.
Thanks in Advance,
user5802014

HI,
Can you please specify that for your attributes CreatedBy and CreationDate , are you using automatic insert value from your entity or not? Or you are passing default values programatically in doDML() method.
I guess for every new row your are using User name for CreatedBy field and current date for CreationDate field,
Why don't you set these field at the time of creation of new row, Override Create() method in your entity bean and then you can set these fields to there default values. and now you should remove Mandatory property to unchecked for these fields in entity also.
like i'm doing here - I'm setting sequence number as default to field insertedLineNo
    protected void create(AttributeList attributeList) {
        SequenceImpl seq = new SequenceImpl("NUMBER_SEQ", getDBTransaction());
        Number seqNum = seq.getSequenceNumber();
        setInsertedLineNo(seqNum);
        super.create(attributeList);
    }Hope this will help you, and let me know if this helps you.
Fizzz...

How to exit from SQL PlUS

HI,I came to know that direct exit from SQL Plus without Oracle shutdown causes future issues of ORA-0600 kind of errors. Is it true? If yes could u pls suggest me how to shutdown from user "SYSTEM/manager". Bcoz with this am warned that I dont have previleges.

Hello,
HI,I came to know that direct exit from SQL Plus without Oracle shutdown causes future issues of ORA-0600 kind of errors. Is it true?The ORA-00600 is an internal error it can be caused for instance by a Bug, a corruption, ... , and if someday you experience this kind of error, you should open a Service Request to My Oracle Support.
However, I've never heard that exiting sqlplus could cause this kind of error. Where did you get such information ?
how to shutdown from user "SYSTEM/manager". To shutdown the database you should be connected with the User SYS (as SYSDBA). You may use the following statement:
sqlplus /nolog
connect / as sysdba
shutdown immediate;
exitHope this help.
Best regards,
Jean-Valentin

How to exit from an update Function Module

Hi Friends,
I am using an Update Function Module in my program.The Program also has various other logics implemented in it. The Update Function Module gets triggered only when it finds COMMIT WORK statement. Now, I want that when the FM gets triggered and inside it, sy-subrc <> 0 at any stage, it should exit the complete processing and come to my main screen.
I tried to use Exit, STOP commands in the FM, but they only make the processing to exit from the FM.
Please suggest what shud I do.
Helpful suggestions will be surely rewarded.
Thanks in advance.
Regards,
Himanshu

hi hemansu,
after coming out from function module check value of sy-subrc
and
if sy-subrc ne 0
exit. or leave to screen 0 [module pool progarm] or stop.
endif.
if helpful reward some points.
with regards,
suresh babu aluri.

How to exit from the class execution process?

I am invoking an exe from my Java application using the Runtime.getRuntime().exec() method.
though the process is completed, the class is still running.
how do i exit from the class execution, but with the process still running??

To sabre150 :
I am directly executing the command through the exec() method:
Runtime.getRuntime().exec("...../iexplore.exe");This way, the control is going to the opened IE window and only on closing it, my class is exiting.
Is there any other way where I can come out of the class, but ensure that the process which i run through the exec() method, is still running?

How to exit from popup screen

Similar Messages

Maybe you are looking for