How to explode a BOM in sales order
Hi,
We have the following scenario.
Product 999 is made by putting together cases of the products 12345 and 8888. The packaging for 12345 and 8888 is not altered but they just take 4 CAR of 12345 and 8 CAR of 8888 and put them on one pallet and that makes a 999.
We get a sales order from customer only for 999 and we would like to have something happen automatically like BOM explosion ( this could be also a trigger when a background job is run) and the sales order should get the relevant qtys. of 12345 and 8888 in the same sales order along with 999.
I was searching in internet and I found that we can use item categories to achieve this. Can some body advise how to do that?
main questions around this are what are the item categories I need to use, what is the BOM type to be created etc...?
Thanks.
Hi,
Maintain iteam category group in material master as per u requirement
ERLA - Structre Material above (Price at main item level)
or
LUMF - Structure material below(Price at each item level).
Now in t-code VOV7,
Select higer level item category which you are dtermining mostlt
TAP or TAQ, go in details of item category
under bill of material tan/configuration maintain APLLICATION - SD01
Now create Material BOM by CS01.
It will explode in sales order.
kapil
Similar Messages
-
How to re-explde the BOM in Sales order
Dear Friends,
In sales orer there is any provision to Re-explode the BOM in sales order.we have make some changes in BOM.Now we want to re-explode the BOM in Sales order so that BOM Components can be available in sales order.
There is any field available in sales order for that?
Please relpy.
regards,
NITINDear Nitin,
go to VOV4 do this confioguration for item catagory determination.
ZB01 ERLA TAQ
ZB01 ERLA TAP TAE
ZB01 ERLA TAQ TAE
ZB01 NORM TAE
ZB01 NORM TAN TAE
ZB01 NORM TAP TAE
ZB01 NORM TAQ TAE
here ZB01 is the order type
now you can see we used three item catagory TAP , TAQ and TAE
TAQ is the first level TAP is the second level and the final level is TAE.
now for multy level explosion go to your item catagory
and go to bills of material tab in the field "structure scope" select "B-Explode multi-level bill of material"
then do a transaction and check
Regards
Subrat
Edited by: subu sd on Apr 2, 2009 1:11 PM -
How to update pricing in open sale order
Hi all
in open sale order suppose my basic price has been changed .how Can i update all open sales order basic price in one shot.Dear Sachin,
Please follow the point as given below;
1. In VTFL for your item category maintain pricing type as B if it is delivery related billing and if it is order related billing VTFA maintain pricing type as B and one more thing maintained Billing Quantity as C if you using VTFA and Billing Quantity as D if you using VTFL.
2. Create the new condition records in VK11 for your new price ( Do not change the existing condition record in VK12) with proper validity dates
3. Use update button in billing the system will pick the new record by accessing VK11 in billing.
Try this, it will work.
Regards,
Bharat B -
How to change pricing Conditions in Sales order in change sales order bapi
Hi Experts,
How to change pricing Conditions in Sales order in change sales order bapi.
I have used the 2 function modules bapi-changesalesorder and sd salesdocument change, But it is creating the new record , instead of changing the existing one, Could please assist regarding the same
Thanks in Advance .
NLNHI NLN
I have just tried on my system and managed to overwrite the existing price by passing the following parameters.
<b>Import Paramters:</b>
SALESDOCUMENT - Sales Document Number
ORDER_HEADER_INX - UPDATEFLAG as <b>'U'</b>.
LOGIC_SWITCH - Import Structure - Pass 'X' to LOGIC_SWITCH-COND_HANDL.
<b>Tables:</b>
CONDITIONS_IN - ITM_NUMBER,
COND_COUNT, -> Condition counter same as KONV-ZAEHK generally it is <b>'01'</b>
COND_TYPE,
COND_VALUE,
CURRENCY.
CONDITIONS_INX - ITM_NUMBER,
COND_COUNT,
COND_TYPE,
UPDATEFLAG as <b>'U'</b>,
CURRENCY.
Hope i have clarified your query.
Kind Regards
Eswar -
How to get Changed fields in Sales order to create a report
Dear Gurus,
How to get the log from sales order for the change of particular field.
In my scenario, If an user remove the delivery block from sales order I want to capture the date on which this delivery block
is removed and by whom (User)?
I know that I can get the log of change but can I get in the form of field updates because further I want to use that date and user name to create a report.
I hope u got my query. Please reply soon that I can create a report.
Thanks in advance.
regards,
SanjayHi
You can use the table CDPOS for tracking the changes at the Table level with the Sales order number
or Else you can also use AUT10 transaction to track the logs/chanages with START DATE, END DATE and the Transaction code in your case it is VA02
Please check and revert back
regards,
santosh -
How to bring in the Open Sales Orders while performing Sales Order Conv
Hi,
Could you give some suggestions on the below:
How to bring in the Open Sales Orders while performing Sales Order Conversion in R12.
Thanks
PravinSee http://ramugvs.wordpress.com/2011/08/27/how-to-stage-and-import-an-order-using-order-import-api-apps-wms-ebiz-11i-r12/
Sandeep Gandhi -
How to transfer cost from old sales order (cancelled) to new sales order
Hi Gurus
I want to know, how to move cost from one sales order to another sales order.
SD created sales order before 1 month and there was production order behind this. Production was completed and all the cost was moved to sales order and also SD has raised invoice on customer. This transaction was completed.
The above order was rejected by customer due to some changes in the order. SD raised another sales order and production order was created to to additional work. Production transfered above stock (produce before on old production order) to new production order.
My problem is stock is now transfered to new production order but cost is still sitting on old sales order. How do I transfer cost from old sales order to new sales order. SD cancelled old invoice and raised new one with full value (old + new work) on new sales order. Now cost is on old sales order and revenue is on new sales order.
Please help.
ThanksHi
I have reverse the sales order settlement, PP order settlement to sales order and I have also done KB11N for transfering the cost to the new production order.
The only problem is I was unable to transfer labour hour confirmation as cost element used for this are not for transfering cost. If I will reverse the confirmation in PP order system will reverse material movement also which I don't want any more. Can you please tell me how to I reverse the Labour hours with out affecting goods movement?
Many thanks -
How can I create a new sales order template
Hello,
how can I create a new sales order template in SAP CRM 7.0 (Web UI)? I want to use this sales order template in scenario ´'Mass Generation of Sales Orders via Marketing Projects'.
Thanks for your support in advance.
Best regards,
anvanHi,
Did you set up this scenario? I want something similar, but I want an ERP order to be created. Do you know if that is possible? Do you have som tips?
regards Camilla -
How can I create a new sales order template in SAP CRM 7.0
Hello,
how can I create a new sales order template in SAP CRM 7.0 (Web UI)? I want to use this sales order template in scenario ´'Mass Generation of Sales Orders via Marketing Projects'.
Thanks for your support in advance.
Best regards,
anvanHi,
Did you set up this scenario? I want something similar, but I want an ERP order to be created. Do you know if that is possible? Do you have som tips?
regards Camilla -
How to disable forward scheduling in Sales order
Hi SD Experts,
Can you please provide the solutions for the below requirements.
Requirement details are below:
How to disable forward scheduling in sales orders....
For My sales order type i already configured in customizing that delivery scheduling should only carry out backward scheduling.
The results is tht no forward scheduling in carried out when material is i stock .. this is ok...
But when there is no stock and ATP indiates an expected inward movemnt, the system ignores the indicator and carries out forward scheduling anyway.
Is there any possibility to change this behaviour?
Appreciate any help....
Regards
SudheerHi
If you do not want the system to switch to forward scheduling automatically, you can specify per plant in Customizing for MRP, in the IMG activity Parameters for determining the basic dates that the system is to continue the backward scheduling calculation even if the resulting start date lies in the past.
Thanks & Regards
Bhaskar -
How to restrict saving of a sales order without a material.
Hi Gurus
Please advice How to restrict saving of a sales order without a material. That is the system saves the order even if no item is assigned to it.Hi Raghu,
In standard SAP we can not do that. Even for some requirements of the customer this feature is required, specially in case of milestone billings, custom materials etc. client after saving the empty sales order they may create materials based on that sales order number.
If it is mandatary for u to save sales order only after the entry of the materials, u can try user exits or go for a code with the help of an ABAPer.
Regards,
Ravi Duggirala
Edited by: ravi duggirala on Jun 20, 2008 11:11 AM -
How to activate WBS Element in Sales Order
Dear All,
How to activate WBS element in sales order?
Thanks & Regards,
PMBasically in case of Repair and overhaul material is taking inside for repair purpose..for that we create service order in which we r creating component, operation(time. labor, machine) besides we create notification to allow overhead activity for this special activity..
once this service order r created and notification is set.. we r estimating cost for this process and updating sales price(DP82) which further send to customer for approval.. once v receive approval v issue a goods along with parental serviceable material to Plant for Plant maintenance estimation..
so all this procedure obey just like project , in this case we have to assign WBS element into sales order level..
WBS elemet is nothing simply its hierarchy which shows what r the steps followed in project(CJ20N)..
Correct me if i m wrong..
thanks
Mk -
How to create Billing Plan in sales order using Function module /BAPI
hi,
How to create Billing Plan in sales order using Function module /BAPI
i hv check few FM such
BILLING_SCHEDULE_READ
BILLING_SCHEDULE_GET_NUMBER
BILLING_SCHEDULE_SAVE
But unable to create billing plan for a sales order.....any other method to create???Hi,
Use this link.
Create sales order with billing plan via LSMW and BAPI BUS2032
BAPI or Function to update Billing Plan in Sales Order Items
Hope this will help you.
Regards,
Vijay -
How to Set User Status of Sales Order at item level.
How to Set User Status of Sales Order at item level by default to 'Purchase Req Not Created' (example)while creating order. Please tell EXIT Name to be triggered & Internal table to be populated.
Thanx,
Srini
Moderator message: please do your own research before asking.
Edited by: Thomas Zloch on Feb 21, 2011 11:19 AMMathew,
Here is a document that should help you get started on enhancing 2LIS_11*
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/c09d5356-d8c4-2d10-8b84-d24723fc1f0a?QuickLink=index&overridelayout=true
Good luck! -
Hi, how to capture normal frieght in sales order
hi,
sap gurus,
how to capture normal frieght in sales order
with out transportation/shipment configuration.
regards,
balaji.t
09990019711.Freight condition can be mapped in Pricing Procedure (V/08) itself & normally freight is a manual condition, which is maintained by user in Transaction at Sales Order or Billing level, as most of the time Freight may not be known as sales order level.
Regards,
Rajesh Banka
Reward points if helpful.
Maybe you are looking for
-
How to set Target URL in Jdeveloper 10.1.3
There is an error when i build a portlet with Jdeveloper coz Target URL is wrong So i want to set Target URL again to referenced to localhost ( I set in hosts file: *192.168.1.2 namdinh.com* but when I build my portlet, Target URL still is http://192
-
Cap3: Edit Audio Timing display's thumbnail is too small
Hello ... Regarding Captivate 3 ... I'm trying to time my voice-over audio to a series of application scenario slides using the Edit Audio Timing display, but am finding it extremely difficult because the small changes in my slides (radio button sele
-
How to deduct tds on advance payment IN SAP
How to deduct tds on advance payment to vendors.
-
Place assets only on First page
Hi Forum, I m wondering, if can i place my Library assets.item(0) only on first page. Because the below script places the Library assets, when i click a particular page... Instead, when i run the script, the assets should be placed only on the first
-
Can't make or receive calls - Motorola Razr Maxx
My wife and I can not make or receive calls on our Motorola Razr Maxx phones. We can receive and send texts. We have turned off our phones and restarted to no avail. We are in the Metro Atlanta area. Any ideas or suggestions?