How to Export 4K DPX at 25FPS in Premiere Pro CC?

Hi there,
Just wondering if it is at all possible to export a 4K sequence to DPX at 25FPS? There definitely isn't an option for it in the version we have, but I'm wondering if there's a plugin or third party application that can be used to export this way. We're limited on the export perimeters for our final product and DPX is the most likely to be used. We can export our footage at 24FPS, but when it comes to audio we'll need to go through further processing to make things match. If we can avoid it that would be great.
If anyone can lend a hand or at least point me in the direction of where to get more information that'd be fantastic!
Thanks so much!
Amy

Thanks Richarad ..It has solved the problem but still crashes some times .As the programme has the break (bumper)after every five minutes ,i hope it will not compress bumper time too after export.

Similar Messages

Hi, How to export my Photoshop Elements 8 and Premiere 8 Elements from my old PC to my new PC

Hi, How to export my Photoshop Elements 8 and Premiere 8 Elements from my old PC to my new one - both are Windows 7???

Hi Jeff,
Thanks for reply.
I want to transfer/export/bring over images and videos to my new PC.
I have one licence (and disc) in my old PC for Photoshop Elements 8 and Premiere Elements 8.
Separately I have one unused licence (disk) for Photoshop Elements 10 and Premiere Elements 10.
I also then need to understand the smartest and easiest approach to:
Either I export software 8.0 and images and videos from old to new PC
- Or
I install version 10 on the new PC and then transfer/export/bring over images and videos to my new PC.
Great if you are able to guide me in this.
Regards,
Per S

How do I display Hungarian fonts in CS6 Premiere Pro Titler?

How do I display Hungarian fonts in the Premiere Pro CS6 PremierePro Titler ?

Windows or Mac?
As far as I know for Windows, any "well designed" Truetype font will work in all Windows programs... BUT... not all fonts are well designed, so not all fonts work in all programs

How do I import an MKV file into Premiere Pro CS6?

How do I import an MKV file into Premiere Pro CS6?

Premiere Pro CS6 doesn't support MKV formats. To import MKV to Premiere Pro CS6, a recommended solution is to convert MKV to AVI.
I've been reading so many different forums on how to convert MKV to AVI. Finally, I summarised three solutions:
First one: HandBrake . This tool is a free and open-source multi-threaded transcoding app. It supports nearly any videos including MKV format and has Mac version and Windows version.
Cons:
1. HandBrake is too professional to handle for most people;
2. It doesn't support MOV as output format.
Second one: there are many third party software which supports converting MKV to AVI. I just test one of them. It's professional yet easy to use and the service is excellent. And there is a step by step guide about how to use this tool .
Cons:
1. Most of them are not free.
Third one: Online-Converter . This kind of converter does a great job on file conversion.
Cons:
1. Like most online converters, the free version of this tool only allows you to convert videos smaller than 100MB. It's too small for video conversion;
2.Your MKV video should be upload to the internet to be converted. This means the risk of pravite information leak is possible.

How can I import MP3 audio files into premiere pro cs5?

Can any one help?
How can I import MP3 audio files into premiere pro cs5?

It is really difficulty for me.If you still haven't found a satisfactory answer,please search it on google.Hope you can get your answer as soon as quickly!
fifa 14 coins
cheap fifa coins

How do I import hd 24p footage into premiere pro? Help please

How do I import hd 24p footage into premiere pro? Help please

instructions for importing/capturing footage:
"Capturing DV and HDV video"
"Importing with the Import commands"
"Importing with the Media Browser"
Since you're new to Premiere Pro, I recommend starting here:
FAQ: How do I learn Premiere Pro?

How do you export a working closed caption for Premiere Pro CC 2014 in .mpg format?

We do weekly 1/2 hour programs that require closed captioning for air. I need to know how to export a self contained .mpg format without using MacCaption. If not possible, is there another, less expensive, 3rd party program that I can use? Or better yet, is Adobe going to create one for us?

Look for the wrench icon in the monitors, above the playback area, to the right. Tooltip for it is "Settings..." -- the menu item is in the flag menu there: Closed Captioning Display...

How to export timeline sequence to .vob in premiere cs4?

Hi All,
I am new to premiere cs4,
earlier i used premire 6.5 for video editing.
in premiere 6.5 for exporting video i had used procoder 2.0
after procoder instalation it comes as plug in premiere 6.5 by using procoder i can export timeline as my desired video format.
but now this procoder is not working in premiere cs4
after i installed procoder it is not showing in premiere cs4.
i tried export option in premiere cs4 but it has no .vob option for export
now how can i export timeline sequence as .vob file and
how can i work with procoder in premiere cs4? is there any chance to install procoder in premiere cs4?
Thanks,
Murali.

I agree with John T. Normally, the creation of a VOB (Video Object) container is done in an authoring app., like Adobe Encore, which he mentioned. Up through Premiere Pro 2.0, there were limited authoring capabilities, built in. However, with PrPro CS 3, those were removed, and all authoring functions were provided with Encore, which has shipped with PrPro, ever since.
Now, the VOB is just a container. It will have mostly the MPEG-2 DVD AV file, which can span several VOB's, which are only ~1GB in size. The first VOB might also contain the DVD Menus, and navigation instructions, all of which can only be ~ 1GB. If those elements are less, then the first part of the MPEG-2 DVD AV file will be in there also.
While I do not know one, there are probably utilities available, that can wrap an MPEG-2 DVD AV file into a VOB. Still, you have Adobe Encore, and it can do that, plus a whole lot more, so just finding a program to wrap the MPEG is likely a waste of time, unless you have other, very specific needs.
To utilize Encore, you have basically three ways (as of PrPro CS 3 and up) to accomplish that:
You can use ADL (Adobe Dynamic Link) to Import your Sequences/Timelines directly to Encore.
You can Export a DV AVI file, then Import that into Encore.
You can Export an MPEG-2 DVD file, then Import that into Encore.
Good luck, and if you do have some other, specific needs for the VOB container, let us know, as someone might have suggestions for that.
Hunt
PS - If you do go the Encore route, and are not familiar with that program, I strongly recommend the very good, and very active Adobe Encore Forum: http://forums.adobe.com/community/encore/encore_general

How am I best to export from Camtasia Studio 8 to Premiere Pro CS6 64bit

I exported a 1hr 35min Camtasia Studio 8 project to a techsmith encoded AVI. This looks fine when I view it using WMP. However when I import into Premiere Pro CS6 (6.0.3) it comes up as only 2min 32secs. I then thought I'd used Adobe media encoder but again the file shows as 2mins 32secs.
Any ideas?

I don't use Camtasia, but I did save some previous discussions
Camtasia http://forums.adobe.com/thread/836800
-and http://forums.adobe.com/thread/775288
-and http://forums.adobe.com/thread/453044
-and http://forums.adobe.com/message/3202148
Techsmith codec http://forums.adobe.com/message/3692768
-and http://forums.adobe.com/thread/1046914?tstart=0

Exporting 5.1 ac3 audio from Premiere Pro CS4

Hi there,
I wonder if anybody can help me out with exporting 5.1 ac3 audio from Premiere CS4 version 4.1.0?
I have a 3min long HD 5.1 clip that I need to cut down to 60seconds and add fade transitions to. The final clip will be used in a media player with very specific spec - the clip needs to remain HD 1080p with a frame rate of 29.97 and a maximum CBR of 38. The audio must be 5.1 aac. The format can be mpeg 2 or h.264. The overall quality loss needs to be minimal.
Up to now I have been cutting up footage that only needs to be stereo and I found the best way to to this while keeping quality was to use Prem Pro and export as mpeg 2 1080p 29.97, quality:5, bitratre: CBR 38, audio as mpeg layer 2 (as these clips were stereo only). These clips played back fine and looked great so I wanted to keep the 5.1 clip process as close to this as possible.
So far all I have been able to get from Premiere Pro is an audio codec called DVD_LPCM which the media player will not recognise. I'm a bit of a novice when it comes to 5.1 audio so I may be doing something obviously wrong...
- I have purchased the 5.1 surcode codec and its activated.
- I have started a new AVCHD (I need 1920x1080) 1080p 29.97 project with a 5.1 audio master
- The orignal file is an mpeg which I have pulled into PPro and selected Clip > Audio > Breakout to mono
- I take the 6 mono channels in the project panel and put them into thier own mono tracks in the sequence.
- the video I use is the original mpeg with the 5.1audio muted in the sequence.
- When i select each track in the project panel and go to Clip > Audio > Source channel mappings, I see that track has already been allocated a source channel. So I go to the Audio Mixer panel and adjust the 5.1 panners for each tyrack according to what the Source Channel Mapping window has told me - Audio 1 is is L, audio 2 is R, audio 3 is LS, 4 - Rs, 5- C and 6- LFE
- I cut the video and all the mono track to the 60seconds I need and export using these settings:
Video - exactly as before
Audio -
Format - Dolby Digital, Codec - SurCode, Audio Coding Mode: 3/1 (L, R, C, LFE, Ls, Rs - 5.1 Surround), LFE: on.
The clip exports with DVD_LPCM 5.1 audio. Is it to do with the AVCHD preset? Could anyone help me get aac? Any help would be appreciated.
Thanks in advance

Using AME and the SurCode Plug-in, here's how the dialog screen looks for the Audio Tab in PrPro 2.0. It should be similar in CS4:
You do have the Minnetonka SurCode DD 5.1 SS plug-in, right?
Good luck, and hope that this is helpful.
Hunt
PS - note that in the screen-cap, I have composited the dialog box, as though it fully displayed, with no need to scroll it. Depending on your display, you may need to scroll, and your scroll bars will look different from what you see here - just ignore that part of it.
Message was edited by: the_wine_snob - Added PS

How can I add new lumetri looks to Premiere Pro 2014?

I just downloaded some great new Lumetri looks, created for SpeedGrade, which I'm currently not using [much].
Since Premiere Pro now comes with a default set of Lumetri looks in the Effects panel, how would I go about importing these new effects for use in Premiere Pro?
I did find the /Documents/Adobe/Lumetri folder, but it doesn't have the actual Looks in it--just a user settings XML file. I searched for the names of the presets but didn't find them.
I also tried to add a New Preset or Custom Bin, but then couldn't figure out how/what to import.
Anyway, I'd love to be able to use these looks, right in Premiere Pro. Any advice?
Thanks in advance. Running Mavericks OS.
PS. The link for download is http://digitalfilms.wordpress.com/2014/05/24/speedgrade-looks/, if anyone is interested.

Hi,
If you choose export "movie" that is all AVI ....go lower to what you see here and you get lots of options...make sure video panel is active or the choices will be greyed out

How do you create an animated GIF in Premiere Pro?

I tried using Premier Pro to edit an animated GIF, but apparently that feature is no longer available? Is there another program that will work? Help Please....
Matt Perry
Edited by: Kevin Monahan
Reason: more searchable title

So, Kevin ... question to Adobe ... considering the ability to export a .gif is pretty important (.gif is one of the most popular formats on the planet), is Adobe willing to allow us Mac users to activate Premiere Pro on a 3rd (Windows) computer? I have an iMac (primary work computer), a MacBook Pro (my mobile backup) with Premiere installed. Now, because Premiere Pro on Mac does not support .gif, I have to have a 3rd computer (Windows). An unfortunate reality.
What can Adobe do for us users?
Thank you.
P.S.: Of course, it would be nice if Adobe just added the ability to export to .gif in Premiere Pro for OS X.

How can I re touch the model in Premiere PRO CS6?

Hello !
I am using Premiere Pro CS6. We are shooting a documentary where i have the host who some pimples, moles etc.
So How can i retouch it and make perfect ?

Welcome to the forum.
One possible treatment, within PrPro would be to do a Track Matte Key, where a little bit of Blur is added. Once, there was a great tutorial on softening blemishes in skin tone, but it is no longer.
This article covers some of the high-points of the process. The success, and handwork, will depend on how much the host moves about: http://forums.adobe.com/message/4575874#4575874
Because so much can be Keyframed, and limited via Track Matte Keying, one is limited only by their imagination. I would first Duplicate the Clip, add a bit of Blur to that Duplicate, then limit that Blur to just the facial areas with a Track Matte.
Good luck,
Hunt
PS - Beyond that, there are some neat tools in After Effects, that go beyond.

How to change the language to English in Premiere Pro CS6?

Hi there,
I recently bought the Master Suite over Amazon, because the Adobe Online Store seemed broken (Unknown Errors after ordering and a Telephone Number which you couldn't call) and I really needed it before the end of the year (Tax Reasons). So now I got the German Version. I want it to be in English because the Translations are sometimes really bad and also most of the Tutorials and Learning Materials are in English. No big deal I thought, you can surely change it to English. I did my Research and I could change Photoshop and AfterEffects to English. What is left of my most used Tools is Premiere Pro. So:
How can I change my Premiere Pro CS6 to english? There has do be a way?
Thanks a lot!
Edit: Also I can't request a language swap as recommend http://forums.adobe.com/message/4702895#4702895 because i couldn't order it via adobe store.

I know that the PrPro S/N's are platform-specific, i.e. Mac, OR PC, but I am not sure if they are also language-specific. Others WILL know. If they are NOT, then it should be possible to download the trial for English, and unlock that with your S/N. I have never done a trial, so have never converted to the full-paid with my S/N, but am just thinking there.
As for the Adobe Store, you are correct that they had issues (many related to Adobe cookies in one's browser), and I had to make a purchase, about the same time that you did, from another browser.
With your invoice and S/N, Adobe Customer Support (not Technical Support), should either be able to help you, or give you the definitive answer to your question. If you bought directly FROM Amazon, they are a certified reseller, so that should not be a problem. If you bought from someone else, just THROUGH Amazon, then there could be a problem.
Good luck,
Hunt

How do I set custom frame size in Premiere Pro 5.5 sequence.

I need to set a custom frame size in Premiere Pro 5.5.
I can't edit a preset so how do I create my own?

If you realy feel 'lazy' or have no idea what settings to choose you can drag the clip the into the New Item icon. This will create a matching sequence.

How to Export 4K DPX at 25FPS in Premiere Pro CC?

Similar Messages

Maybe you are looking for