How to export a file keeping the original timecode
Hello all,
I'm struggling to find out the way to do the following:
I have an entire footage file and from that I need to cut specific interviews to be translated however I must keep the original timecode where I extracted these interviews from so the editor knows where to place the subtitles (as s/he will be using the file as a whole and because it is a foreign language they won't know the correct place).
Does anyone know how to do this? Using FCP7 btw.
Thank you so so much!!!
You cannot export a single QT file that has multiple timecodes embedded into it. What you can do is drop on the TIMECODE READER filters onto the clips so that they visibly show the timecode on the screen as reference.
Similar Messages
-
Print to file, keeping the original filename
Lightroom – Print mode - Print to JPEG file - Print to file. Use: All filmstrip photos. Question: How do I Print to file and save all filmstrip photos with the original names? Seemingly I can only do so image by image by typing the original name. Furthermore the original name is not saved in the metadata when using Print to file. I want to print multiple photos keeping the original name andI do not mind if a digit is added to the end of the name. It should be possible non? I never do away with the original name.
I have the same question
-
MPEG Streamclip doesn't keep the original timecodes
I have a a ton of ProRes 4444-files that I want to re-encode to ProRes 422 LT for offline editing (we have limited space on our XSAN at the moment, that's why we use 422 LT instead of the 4444's).
I did this convertion in MPEG streamclip as it encoded quite a bit faster than Compressor does with the same files. And time was of the essence. But the resulting files does not have the same timecode as the original ones. They all begin at zero hours. I've googled the heck out of this but can't find anyone with the same problem. And there does not seem to be a preference to keep the timecode tracks in the export window.
Anyone know anything about this. If it doesn't keep the timecodes the same as the source files their useless for the offline-online workflow.
Cheers!This is what the MEDIA MANAGER is for. Recompresses the footage, keeps ALL the metadata.
Shane -
MY colleague has a certain setting in Acrobat that allows him to keep the original file name when he converts documents from Word to PDF. Every time I convert Word, Acrobat overwrites the filename and names it "untitled.pdf". I would like to retain the original name and for Acrobat to simply add the .pdf file extension to the original name. How do I do this?
I have no idea what you are doing for sure. Does your WORD document have a name. I opened a WORD document and selected the Acrobat Distiller printer for AA5, I got the file menu for selecting the name and it was automatically filled in with the DOC changed to PDF. If you are using PDF Maker, then you will need to search there - I removed PDF Maker for AA5 years ago and can't view that part. I see the same types of options in PDF Maker for AA8.1.2 as I saw in the printer for AA5 and guess it is the same. The untitled.pdf suggests that you never saved the original DOC file so it has a name.
-
I am exporting a Pages document to Epub and Pages is compressing my jpg images (I think to 72 dpi from original 600 dpi).
How do I keep the original jpg size during the export to epub process?We are still trying learn how to use Pages to build ePub documents with high resolution graphics that will expand clearly when they are tapped. Very large screen shots are my example here.
-
Exported video size smaller than original video size. How do I keep the original size?
I exporting a video from Adobe Premiere CS6 today, and I noticed the video was about 1/2 times smaller than the original video I put in. I then uploaded the video on YouTube, and the size was still the same. I tried to change the preset to 1080p 29.97, 1080p 25, etc. and the same with 720p, and 480p, but the size only changed slightly.
How do I keep the original size after exportation of videos?More information needed for someone to help... please click below and provide the requested information
-Information FAQ http://forums.adobe.com/message/4200840
Also, exactly what are you editing, and what are your export settings?
Also, The tutorial list in message #3 http://forums.adobe.com/message/2276578 may help -
How do I keep the original pre-RAW preview exposure ?
IF I understand it when I imort a RAW "NEF file from my Nikon, LIghtroom shows a preview that is a jpeg exposre, something equivalent to a point and shoot photo. Then after processing the info from the RAW file, it shows the unprocessed image. Typically, this image for me becomes unsaturated and less colorful. Although I want to process "some" of my photos, I like some of the point and shoot images, and I'm wondering how do you keep the original exposiure that LIghtroom shows before showing the RAW unprocessed image?
When I'm taking photos just to archive a thing, I like the advanced point and shoot saturated image. When I want to be artistic, I prefer to process them myself. Is there a setting that will allow me to keep the preview look?natekon wrote:
Is there a setting that will allow me to keep the preview look?
Aside from what Lee Jay said (which is technically accurate) the best thing you can do is to learn how to quickly make image adjustments and if you find you are making the same adjustments all the time, create a preset or consider making a new Default tone/color adjustment for your images. The fact is that the EFIX JPEG is the camera maker's interpretation of the raw image. It's neither accurate nor sacrosanct. It's simply a different rendering of your raw data. You can look at using different DNG profiles (in the Camera Calibrate panel) to alter the color rendering and adjust your tone controls to taste and make a preset or a new Default.
But in answer to your main question can you use those JPEG previews as a basis for LR, no other than you make the manual adjustments yourself... -
Having trouble figuring out how to save the original photo after I've cropped it - i.e. I want to create a headshot of my husband from a photo of the two of us, but I also want to keep the original. Seems very basic, but can't seem to figure it out. Any help would be great!
Use File >> Save As
Choose a different file name so as not to overwrite the original and don't save any changes when closing the original. -
Some mail disappears from my inbox and I have discovered that if I have to answer or forward the original e-mail it disappears permanently and the original and the reply/forward e-mail all end up in my Sent box - which is emptied each month at the moment. Any ideas how to keep the original in my Inbox? Has only happened since updating to maverick.
where on my computer am I suppose to make the individual picture files and have them to upload on my ipod touch.... I do have a photo library on my computer, but in the photo tab in itunes for the ipod touch and there is nothing checked for syncing, cause when I do check it it always says its going to replace everything i have in my photo library on my ipod touch..... So how am i suppose to have it checked and have it NOT replace pictures on it????
Also I cannot make more photo albums into my ipod touch, it just replaces the one album every time....
I am very frustrated cause I have tried the manuals and the apple support help etc and nothing pertains to my exact issue.....
Please if u could elaberate I would appreciate it alot.....
thank u -
I'm not sure if this was a recent update in Mavericks, but when I used to delete items from iTunes it would ask something along the lines of:
Do you want to keep the original file or move to trash?
Now I no longer get this, instead iTunes asks:
Are you sure you want to delete the selected song from your iTunes library?
After which, if you choose the option "Delete Song", you get no option to keep the original file, it just straight up deletes if from my library and hard drive. Does anyone know if there is a way around this? For whatever reason, I want to be able to keep the original file on my Mac, without keeping it in my iTunes library.
I've tried resetting dialogue warning, and this hasn't made a difference.
Thanks!iTunes prefs > Advanced > Reset all dialog warnings. - https://discussions.apple.com/message/23987276
Resetting iTunes Store warnings - http://support.apple.com/kb/HT1734 -
My husband and I use the same apple Id. We would like to each have our own apple id, but we do not want to lose all our information associated with the current id. One of us will keep the original. If one us creates a new apple id how will that affect the iPhone and iTunes?
That would be my suggestion. Just keep using the common one for purchases in the stores. Then each get another AppleID using a free gmail, AOL, hotmail, MS Live or whatever email account.
Delete your current iCloud account and login with the new AppleID, and logout of Messaging and then backin with the new AppleID. Now you have a shared iTunes/App store account, but completely separate, independent iCloud and iMessage accounts.
You can still share calendars if you wish to, even across separate accounts - http://support.apple.com/kb/ph2690 -
HT2203 How do I export a file from the new iMovie 10.0.2 to iPod size?
How do I export a file from the new iMovie 10.0.2 to iPod size? I used to be able to do this and it would save as a m4v file but I can no longer do this and the files are too big.
iTunes: May be unable to transfer videos to iPhone, iPad, or iPod
iTunes: Frequently asked questions about viewing and syncing videos
You may need a third-party computer app like HandBreak. That one is free and has preset outputs for iOS devices -
When I move files between a couple of Macs the creation date etc chnges to the time I'm moving them.
I need to keep the original details.Well it now looks like it has sorted it's self out, all working fine now.
-
how do i keep the original manual sort of my photos that i had in previous library after a rebuild in iphoto library manager? and keep the events in the same order with blank events also
Not sure you can.
Library Manager creates an entirely new library. It will then copy (or try to) your photos and all the associated metadata and versions to this new Library, and arrange it as close as it can to what you had in the damaged Library. It does this based on information it finds in the iPhoto sharing mechanism - but that means that things not shared won't be there, so no slideshows, books or calendars, for instance - but it should get all your events, albums and keywords, faces and places back. -
I've a video with an extra translator voice how can I remove the translator and keep the original voice ?
I got the quicktime 7 pro but that did not solve my problem I need to listen to the origenal voice on my video however in window properties there is only delete the it deleted all the voices together :'( helllllllllp someone
Maybe you are looking for
-
Contacts not receiving text/sms from VZW iPhone 5
So, I switched from Att and everything is working great except for a few sms not getting through. My Friend is on the Viaero networka nd has a SG3. Sometimes they get them and most of the time they dont. Ive called VZW and they blame att and the
-
A user's computer with Adobe Reader X isntalled (when viewing a PDF file) gets blocked at the top and on the left side. It appears that there are multiple toolbars at the top that are now just blank and a side bar on the left that stretches from the
-
Selection of open item for payment
Hi I understand that in the automatic payment program, the selection of the open items for payment is partly determined by the "documents entered up to date" and the "Next payment" run date. Would like to confirm if the posting date specified will af
-
Extending ovd schema with 10.1.4.3 release on linux
We are trying to apply Note 739067.1 but $OVD_HOME/tools/ldapmodify is not available in 10.1.4.3 release. There are some script to use a java ImportLDIF class but in windows format. Is there some procedure to extend ovd schema from command line in li
-
Query Oracle database using JCheckBox getLabel()
Hey guys. I'm not sure if this is the right place, so if it's not I greatly apologise! I just figured if it include Java code then it's appropriate. Anyway, just a query... I've got a Java application hooked up to an Oracle database. I was just wonde