How to export a large, high-rez Keynote'08 file as a QT movie?

I have used Keynote '08 to create a 1.6GB presentation, 1024 x 768 resolution, 940 slides of stills and animation clips, navigatable hyperlinks on every slide. It plays and navigates perfectly well in Play mode.
The presentation would of course be most effective if I could export it as a single QuickTime movie - 1024 x 768 resolution. But I have not been able to do this, either on my own or with help from Apple employees at an Apple retail outlet. (I cannot remember whether we tested Keynote '08 or '09 at the store)
The best I've been able to accomplish is to break the presentation into ten parts and export them as ten QuickTime movies at a reduced resolution of 800 x 600.
I've been able to create a full length single movie - but only as a web-sized lowest quality (H.264) QT movie - in which the hyperlinks work but the slide captions cannot be clearly read.
This interactive education presentation would be so much more effective if I could export it as a single high-rez QT movie.
So I am searching for a solution to this problem, if it indeed exists using Keynote '08 or '09, and feedback/educated opinions from Keynote users who have encountered the same problem. Is Apple aware of this limitation? Might Apple address it in Keynote '10 whenever that arrives? Is there additional software available that could solve this problem?
TIA

I want to be able to watch my 1080p work on Apple TV in the best quality.
The TV device is limited to max of 720p playback. While the TV1 did have an option to scale content for output as 1080i or 1080p, this was discontinued with the TV2 since 1080p native HDTVs will automatically rescale the negotiated input as/if needed for proper viewing. To maintain compatibility with the TV1 device, Apple presets will export 720p content only if the source file is larger than or equal to these dimensions and the frame rate is 25 fps or less. They will not allow you upscale smaller dimension files. Thus, your 1080p source files will be exported as either 720p24 or 540p30 files depending on the source frame rate. If you have an TV2 device and wish to ensure a 720p30 output, then use a free third-party app like MPEG Streamclip or HandBrake. Both have TV2 specific conversion options.

Similar Messages

How to export a data as an XML file from oracle data base?

could u pls tell me the step by step procedure for following questions...? how to export a data as an XML file from oracle data base? is it possible? plz tell me itz urgent requirement...
Thankz in advance
Bala

SQL> SELECT * FROM v$version;
BANNER
Oracle DATABASE 11g Enterprise Edition Release 11.1.0.6.0 - Production
PL/SQL Release 11.1.0.6.0 - Production
CORE    11.1.0.6.0      Production
TNS FOR 32-bit Windows: Version 11.1.0.6.0 - Production
NLSRTL Version 11.1.0.6.0 - Production
5 rows selected.
SQL> CREATE OR REPLACE directory utldata AS 'C:\temp';
Directory created.
SQL> declare
2    doc DBMS_XMLDOM.DOMDocument;
3    xdata XMLTYPE;
4
5    CURSOR xmlcur IS
6    SELECT xmlelement("Employee",XMLAttributes('http://www.w3.org/2001/XMLSchema' AS "xmlns:xsi",
7                                  'http://www.oracle.com/Employee.xsd' AS "xsi:nonamespaceSchemaLocation")
8                              ,xmlelement("EmployeeNumber",e.empno)
9                              ,xmlelement("EmployeeName",e.ename)
10                              ,xmlelement("Department",xmlelement("DepartmentName",d.dname)
11                                                      ,xmlelement("Location",d.loc)
12                                         )
13                   )
14     FROM   emp e
15     ,      dept d
16     WHERE e.DEPTNO=d.DEPTNO;
17
18 begin
19    OPEN xmlcur;
20    FETCH xmlcur INTO xdata;
21    CLOSE xmlcur;
22    doc := DBMS_XMLDOM.NewDOMDocument(xdata);
23    DBMS_XMLDOM.WRITETOFILE(doc, 'UTLDATA/marco.xml');
24 end;
25 /
PL/SQL procedure successfully completed.
.

Keynote '08: How to export an iPhoto slideshow into Keynote

Is it possible to export an iphoto slideshow into keynote?
Thanks!

Answered my own question! Exported iPhoto slideshow to desktop - where it appeared as a .mov file -- then dragged & dropped that into Keynote. It plays there, photos & music exactly as designed in iPhoto - remote works to start and stop also! Perfect!

How to export an IMovie as a small file quicktime movie

I have searched and searched for answers or tutorials explaining how to export an IMovie as a quicktime movie that is small enough for emailing and posting to the internet. If I use the default setting my quicktime movie ends up being over 500MB which is way to large for sharing. I tried exporting using the "custom" or "compression" settings but don't understand what H 264,DV Pal, etc. means.
Any help would be greatly appreciated.

To get a movie to that size, you can 1) make it shorter. 2) make it a smaller dimension. Like scale it down from 1920x1080 to 320x240 3) Take away quality by reducing the bit rate, reducing the number of key frames, etc. 4) Reduce the frame rate from 30 frames per second down to maybe 15 frames per second. The resulting movie would be postage stamp size and not very good. Use h.264 because it compresses very well.
By far the best way to send a movie is to post it to YouTube or similar site in full resolution and then link to it in your email.
Message was edited by: AppleMan1958

How to export the data to a Excel file

Hi all,
How to use the 'EXCEL_OLE_STANDARD_DAT'
to export the data from itab to EXCEL file.
REPORT ZT11.
data : begin of itab occurs 0,
      t1(3) type c value 'sag',
      t2(3) type c value 'ntc',
      end of itab.
      append itab.
      write : itab-t1,itab-t2.
      CALL FUNCTION 'GET_FIELDTAB'
      EXPORTING
        LANGU                     = SY-LANGU
        ONLY                      = ' '
        TABNAME                   = ' '
        WITHTEXT                  = 'X'
      IMPORTING
        HEADER                    =
        RC                        =
        TABLES
          FIELDTAB                  =
      EXCEPTIONS
        INTERNAL_ERROR            = 1
        NO_TEXTS_FOUND            = 2
        TABLE_HAS_NO_FIELDS       = 3
        TABLE_NOT_ACTIV           = 4
        OTHERS                    = 5
      IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
      ENDIF.
      CALL FUNCTION 'EXCEL_OLE_STANDARD_DAT'
        EXPORTING
          FILE_NAME                       =
        CREATE_PIVOT                    = 0
        DATA_SHEET_NAME                 = ' '
        PIVOT_SHEET_NAME                = ' '
        PASSWORD                        = ' '
        PASSWORD_OPTION                 = 0
      TABLES
        PIVOT_FIELD_TAB                 =
        DATA_TAB                        =
        FIELDNAMES                      =
      EXCEPTIONS
        FILE_NOT_EXIST                  = 1
        FILENAME_EXPECTED               = 2
        COMMUNICATION_ERROR             = 3
        OLE_OBJECT_METHOD_ERROR         = 4
        OLE_OBJECT_PROPERTY_ERROR       = 5
        INVALID_PIVOT_FIELDS            = 6
        DOWNLOAD_PROBLEM                = 7
        OTHERS                          = 8
      IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
      ENDIF.

Hi, you can even use control technology. There are several example programs how to export data to excel. Please go to transaction SE80. Choose enviroment->examples -> control examples. Take a look at office integration.
/Ernesto

How to export the data to a excel file from RSA3?

Hi experts,
1.I am trying to save the RSA (SRM extractor) to excel spread sheet to compare SRM data with BI data. When i run the the transaction RSA3 it just showed me 10 different data packets. How to export the data to excel spread sheet for reconciliation?
2. Does any body know if the stepup tables exist for SRM extractors?
Thank in advance
Sharat.

Hello Sharat,
You have two options of saving data to excel sheet:
Step 1:
Goto RSA3, change the "Data Records / Calls" to 1000 and then execute. This way instead of 10 different packets you will get one packet.
Step2:
Click on the list button, open the packet by double clicking it. You will see all the data on your screen.
Step3:
Goto System -> List -> Save - > Local File -> Spreadsheet and give some name for your xls file.
Assign points if helpful.
Regards,
F-S

How to export special characters into an XML file?

Dear experts,
We read files from our customers and save data into our customized table without any character changed, including some address fields. In those address fields, some special characters (not in our code page) are also kept. When we want to write these address fields into an XML file or flat file, the special charcters become "##" or not readable, can anyone help us to solve this issue?
Question1: How to write special code to an external file?
Question2: how to use 'CALL TRANSFORMATION' from an internal table to an XML file?
Your answer is highly appreciated!
Joanne

Hi Joanne.
Please check the below link.
CALL TRANSFORMATION
Before that u have to create one transformation program in STRANS tcode for using it in call transformation statement.
Hope it will be useful.
Regards,
Lakshman

How to process overly compressed high volume audio files

I used a process in scientific filters in audition 3 to process overly compressed high volume audio files normalized to 0 db. It was like magic.
How would you process this sort of file in Audition 6.

Below was the process used in Adobe Audition 3. The sound was much improved. Try the steps on a file you have to hear the difference.
Effects- Amplitude - Normalize - uncheck the decibles format box - normalize to and normalize L/R boxes checked, enter 48 into percentage box.
After normalization was complete
Effects - Filters - Scientific filters - select Chebychev 1 tab - band pass button and select the following parameters.
Cutoff =4, high cutoff = 22050, order = 18 all other settings at defaults values (0). Delay radio button sellected, check the extended range box, press OK.
Increase to appropriate volume after processing if necessary.

How can I recover an involuntarily deleted keynote file after trash?

After 3 days of working in Keynote I moved several files to my new 250gb hard disk. Many files were moved to trash and deleted. My work in keynote was lost and I have tried everything to recover it. Can you help me with this..? Is there a trick to recover a deletd file from trash...? Is there a recover-data file in my computer..? Thanks
Unease

How can I recover an involuntarily deleted keynote file after cleaning trash ..?

How to export user defined properties in seperate file

Hello,
i want to export user definied properties in a seperate file using OMB+ commands. The documentation of this topic doesn't work.
The OMB Code I use is the following:
OMBEXPORT TO MDL_FILE '${Pfad}/006_${Project}.mdl' \
FROM PROJECT '${Project}' \
ALL_CLASS_DEFINITONS \
CONTROL_FILE '$SANDBOX_HOME/Project.ctl' \
INCLUDE_USER_DEFINITIONS \
OUTPUT LOG TO '${Pfad}/006_${Project}_exp.log'
The control file defines the path and filename for the the definitons in this way:
DEFINITIONFILE=C:\Arbeitsverzeichnis\udp.mdd
But the file will not be created and i get no error message.
When using this command the udp' definitons will be exported, but in the general project export file. Which is the correct way to export the definition in a seperate file?

- Create a user-defined OTD with one String field.
- Create an XSD-based OTD with repeating name and value fields of type String
- Create a "New Web Service" Java Collaboration whose input will be the first OTD, whose output will be the second OTD and whose operation will be named getProeprties, or some such
- Implement, in Java, the code necessary to read your properties, given the properties file name or path (given in the input OTD) and populate the name/valur pairs on the output OTD
- drag the operation of the collaboration onto the Business Process Editor canvas as an Activity
- Configure a Busienss Rule to set the input of the getProperties activity to the name/path of the properties file
- Configure a Business Rule(s) to use the name/value pairs returned from the ivocation of teh getProperties service
If you wish to take this one step further you could consider writing the java collaboration
a) generically so it can be reused from different business processes
b) to cache the properties on first read so each invocation after the first one simply returns the in-memory values instead of re-reading the proerties from disk
c) generically so it can read, cache and return different property sets depending on the properties file/path provided as input.
Bear in mind that IO from a java collaboration by means other than an eWay violates the EJB spec.. It works all the same.
Message was edited by:
mczapski

How to Export BW Query Report to .csv file

I try to export BW QueryReport to .csv file using ReportAgent and URL command in WEB Template:
<SAP_BW_URL DATA_PROVIDER='VIEW1' CMD='EXPORT' FORMAT='CSV'>
but can't find the result file.
Is someone have experience in exporting BW Reports to file in automatic way?

Another way to do it would be to use transaction RSCRM_BAPI.
Not ideal for large volumes but allows you to extract from a query.
Regards,
Mike

How to export data from DB to flat file with ODI?

we want to export DB2 tables to flat files.
Who can tell me how to do it with ODI?
Please give me a simple example or steps.
Thank you.

There are two ways
Either use IKM Sql to File Append
(or)
OdiSqlUnload
For OdiSqlUnload you can use this technique to provide the connection parameters - http://odiexperts.com/?p=1985

How to export as mp4 and achieve effect of "fast start" in mov export

When exporting as a .mov one can check the "fast start" prepare for internet streaming option. This option allows the end user to start watching your video without waiting for the entire file to buffer/download. That's great.
However, when export as a .mp4 file, the same option does not exist.
Does anyone know how to achieve this "fast start" effect if exporting as an mp4?
I have an existing work around...just rename the .mov to .mp4.
I would like an .mp4 file because I use ezs3 to host my videos and the mp4 player options are far superior to the mov player options.
Thanks for your help.

I'm having the same problem. I want to export an .mp4 that can start playing as soon as it starts downloading from a web site. Until I can find a solution, I'm using .m4v files, but they're huge.
Does anyone have a solution?

How to Export Address Book contacts as CSV file for Gmail?

Hi
I wish to export some of my Address Book contacts towards Gmail (which i use through the web interface for now) but I don't want to export vcards as i don't trust big brother Google with all the other data (snail mail, phone numbers, birthdays, etc).
I have tried to do the export through Address Book but found no CSV export option.
I've searched the forum for an answer, but to no avail. Some other (paying) websites claim to offer solutions but the "pay before you see" deters me from using them.
Any tip on how to do this would be greatly appreciated. Scripts and software also welcome, if shareware/freeware.
Cheers,
FMN

Thanks for your answer, but gmail's help specifically states one can import contacts in CSV format and i was looking for a simple batch solution.
Here is a link to the relevant gmail page (might be in French - am not a "Froguette" for nothing ;)) about importing:
<http://mail.google.com/support/bin/topic.py?topic=28647>
and the one about importing addresses as CSV files:
<http://mail.google.com/support/bin/answer.py?hl=fr&answer=12119>)
So my question still stands.
FMN
Message was edited by: FroguetteMiNote - wrong link corrected
Message was edited by: FroguetteMiNote

How to export 1080 HD video to MPG4 file with chapters?

Now that I have put a sequence together in FCE, how do I create a 1080HD MPG4 file that can be used on a PC, MAC or with the WD HD Media player (for those that know the latter).
Thanks!

That process will work, but won't give you HD video (as iDVD output is only SD). If you have FCE and Quicktime Pro, you could create what you are after.
1) In FCE, use File->Export->Quicktime movie ... (and include all markers) -> File1
2) In FCE, use File->Export->Using Quicktime Conversion ... -> File2
3) Using Quicktime Pro open File1 and File2, extract the chapter track (text track) from File1 and then add it to File2.
4) Using Quicktime Pro make the newly added text track in File2 the chapters for the video track. Save the result a self contained QT movie file.
You will now have a a HD video file with chapters.

How to export a large, high-rez Keynote'08 file as a QT movie?

Similar Messages

Maybe you are looking for