¿¿ How to export a looped QT clip ??

I have a a 2 sec (audio/video) clip i would like to loop and put into iWeb, so it will run repeatedly on my .Mac website. It seems simple but I can't seem to find any explanation of how to do this.
Does ANYONE have an idea of how to do this? I've heard mention of "loop=true" and have seen posts, but, as of yet, have not been able to find an explanation of "how" to do it.
Thanks -
cg

that's definitely what i want it to do, but i don't want the visitor to the site to do anything to get the loop started. I had to hit play in order to get your loop to start.
Did you open the file in the QT Player or using a browser plug-in? Should have opened automatically in Safari or FireFox. However, you are correct in that I did not set the"Automatically Play when Opened" flag in the above example. Went back and corrected this. If you "Empty Download Cache" in QT Preferences and try it again, it should re-download and open automatically now.

Similar Messages

How to export many single video clips

I have around 25 videos in my project window that I want exported. Originally they were longer and I changed the in and out points. I now want to have these corrected videos saved to a different location on my computer. I still want the long video clips, but want the short or corrected ones too.
From what I understand, I would have to drag them individually to the sequence and render each one individually. I would rather not actually make a sequence with them all in one video but instead have them separate.
Can anyone help me with this? Thanks for you time and effort.

Here's what I would do....
1) Drag all 25 clips to one sequence (5-10 seconds)
2) Right click on each clip, one at a time, and choose Nest (2-3 minutes)
3) Double-click on the first clip, which will open it's nested sequence on the timeline. Go to File>Export, then choose all your export settings and file-save location. Now click on Queue to start Adobe Media Encoder. After beginnig the export of the first clip, the export settings will remain the same for any clips you export after it, until you change the export settings again.
4) Repeat Step 3 for each remaining clip, excepting that you will not need to do export settings and file-save location again.
Total time: 15-20 minutes. Rendering time will vary.

Why can't I export only a selected clip?

I am a teacher. I used to record all the kids in a class doing a certain task, and then select the clip of each child and export each child as a separate QuickTime movie. We upgraded machines and now for the life of me I cannot figure out how to export only a selected clip in iMovie '08. Any help appreciated!

Make a separate Project for each child.
Drag the clip of that child into the project. Then Share to whatever format you choose.

How can I email a video clip I downloaded into my iPhoto library to my friends? I tried creating an email and attaching the clip but there is no sound and no picture when the 5 minute attachment "plays." How can I file= export it to them from iPhoto?

How can I email a video clip I downloaded into my iPhoto library to my friends? I tried creating an email and attaching the clip but there is no sound and no picture when the 5 minute attachment "plays." How can I file=>export it to them from iPhoto?

Have them install Quicktime on their PC's from Apple's website, that's the easiest fix.

How to export a continous waveform data from a while loop?

Hello there,
I need to add noise signal to my waveform which is read from a binary file. I use noise generate vi (deleted the density part) from NI example as my sub VI, and put it into a while loop in order to get the continous noise signal, but I don't know how to export this data. There's no waveform come out from the noise waveform output tunnel (on the while loop). I used output tunnel, didn't work, tried shift register, didn't work... Can anybody help?
Also, how to fix the dt problem for the noise generate vi and my original data ( from binarty file)
Thanks in advance!
Wendy

hi
I think notifier can do the trick (an example is shown in the master-slave template).
Another possibility can be a FG (or action engine, look for the nugget ActionEngine, it will change your LV-coding life !)
N

How to set a loop on an .flv so that an exported .swf loops?

hi there. i am using Flash CS4 and I would like to know how to set a loop in an flv file so that when it is exported to swf, the movie will loop. Basically i have taken an existing interactive flash movie and have decompiled it into its individual flv counterparts. what i intend to do is take out all the nonsense from each flv file and then reconstruct the flash movie, export each file to swf and then convert each swf to avi or some other video format. to do this i will be using sothink swf to avi converter which allows you to convert swf files to avi files. this program allows you to convert swf files that loop by looping the swf file for as long as you want until you stop it, in which a video file is created from "the recording"
after i decompiled the original file, many of the existing flv files were already set to loop. i know this because when exported to swf the swf file would loop. now when i went ahead and went into each flv file to edit a couple things, when i went to export them to swf, the swf files wouldn't loop. mind you, some of them did loop, and some of them did not loop. the ones i have edited are all supposed to loop and i cannot figure out what it is thats preventing some of the flv or exported swf files to loop. all i did was take out a few unnecessary frames from the beginning of each flv and nothing more. i am pretty new to Flash and do not know anything about coding and know very little about flash settings.
i figured that selecting the "loop playback" option in the control drop down menu might help seeing as the flv file does loop when played in the editor, but again when exported to swf the swf file does not loop. what confuses me the most is that some of the exported swf files do loop. ALL of the exported swf files need to loop and my guess is that in order to make that happen, something in the flv file needs to be set correctly.
can someone please assist me with this issue? if there is a way to simply loop an existing swf file that does not loop, can someone tell me how to do that? any help with this problem is greatly appreciated and i appologize if something like this has been asked before.... i just couldnt stand looking through 22 pages of search results to find the exact solution to my problem
thank you!!!

Hi,
You can use shortDesc property. Something like
<af:commandToolbarButton text="Some Button"
id="ctb1" shortDesc="This button does something.."/>-Arun

How can I export just a few clips to LiveType?

I want to just export a short group of clips from FCE to Livetype to use as a background, but I can only figure out how to export the entire segment, and I think it is hurting the performance of LiveType. Does anyone know? Thanks.
MacMini G4 Mac OS X (10.4.6)
MacMini G4 Mac OS X (10.4.6)

In FCP there is a batch export option but I do not know if it exists in FCE.
but, honestly, manipulating video in LiveType is frsutrating and a waste of time. You have much more control in FCE/FCP. Just use your clip for timing or placement but don't try to render it in your LT movie.
bogiesan

How to export clips to After Effects for Compositing

I want to export clips from my timeline into After Effects to add some compositing of clouds and sky replacement.
FCP 7
AE CS5
OS 10.6.8
I dragged the clips from my timeline back into the Browser into a new bin but when I export from there, the dimensions aren't the same as my project.
My project is 1920x1080 and when I export the edited (spliced) clips from the browser, they're 720.
I don't want to go into my raw files and try and eyball where I spliced the clips b/c each video file is about 2 gigs and I'm only using a small section of each clip.
Any suggestions on how to do this?

It is much easier just to use Automatic Duck's Pro Import AE which will allow you to send your timeline to AE.
AE will use the existing media that is called for by the FC timeline, you don't have to copy/export the media files.
Used to cost several hundred dollars, now FREE as the creator has gone to work for Adobe.
http://www.automaticduck.com/products/piae/
P.S. The site says it is compatible up to CS5.5 which was current when development was stopped, but I use it in CS6 with no problem.
MtD

How to export 4 second clips from GB as mp3?

I'm trying to export little 4 second clips from a voice narration in GB as mp3 files.
I tried saving the 4 second clips as loops... but they still seem connected to the rest of the audio track.
Do I have to start a new project for each new 4 second clip and then save that separately?
I'm a total GB newbie... so THANKS for any pointers in the right direction.
p.s. I want each GB clip to retain the filtering I've added to the voice.
Thanks...

The next time can you copy the answer to this forum directly? Very good collection of hints, but a horrible design and commercial background. A question should get the status "answered" only, if the answer was written in the forum. What good is a link to other users if this page at some point no longer alive?

Hi there. I shot with a nikon d7000. The clips look great on the viewer but quite bad on canvas (also after its been exported) I converted my clips to apple pro res 422 using mpeg streamclip. The size I used was 1920 x 1080. How can I fix these?

Hi there. I shot with a nikon d7000. The clips look great on the viewer but quite bad on canvas (also after its been exported) I converted my clips to apple pro res 422 using mpeg streamclip. The size I used was 1920 x 1080. How can I fix this?

This is the clip:
This is the sequence:
I know they both should match. Question is, should I re convert the clips in mpeg using different size settings? Or should I change the sequence settings? how?
Thanks A LOT.

How is the best way to export my project with clips and videos?

I would like to save my project and export the project with clips and videos included. What is the best way to do it?

Can you clarify:
clips and video
Seems as though you want to retain the original media?
Export as a Master File to get a good quality export file of your Timeline.
Al

Made a 2 minute edit on Final Cut Express but at the 30 seconds (after I exported), there's a clip showing up that is not in my project, a clip i don't want in there, a glitch, how can I correct this problem? I don't want to start over again :(

Basically, I have 2 problems:
1) When I export it shows this clip that's not in my normal project and it ruins my project by having this clip in there; it's like a glitch. I tried to change the clip, and and still doesn't make the project normal again. Tried a new sequence and dragging the project into HD Mode and to no avail.
My camera:
HD: 1080p
Settings: At Hd
2)
Also, it's only displaying black bars above my project, even after exporting at 720p. I just don't want this random clip in my project or the black bars. I'm using Final Cut Express. Does anyone have any possible idea what this could be? Any help woud be much appreciated! I'm clueless on this.
IS ANYBODY OUT THERE? : )

1) Is it a video clip? Something you recognize? To be clear, it's displaying at a point in your exported movie but doesn't appear at all in the sequence?
2) What are your sequence settings? Right-click your sequence and choose "Item Properties" to verify.

I created a theme and a slideshow in iDVD. The theme (intro) plays looped in the preview, but does not go on to the slideshow. How do I "un"loop it?

I created a theme and a slideshow in iDVD. The theme (intro) plays looped in the preview, but does not go on to the slideshow. How do I "un"loop it?

Perhaps someone on this forum has done what you are asking and would be more help than me.
I think it could be done, but you'd have to do some fiddling around. The concept is to make the iDVD theme part of your iDVD or iMovie created slideshow, so that it will play as part of the slideshow.
I don't know if this will work, but if I were experimenting I would try creating an iDVD project with just the theme in it, and then save that to your desktop as a disc image. When you click on the icon of the disc image you have just created, you will see a Video_TS folder. Open that and you will see a file containing the letters VOB. Open that file.
You need to convert that VOB file back to DV or Quicktime Movie which iMovie is designed to handle. For that you need the free download MPEG Streamclip:
http://www.apple.com/downloads/macosx/video/mpegstreamclip.html
but you must also have the Apple mpeg2 plugin :
http://www.apple.com/quicktime/mpeg2/, which I believe costs about $20.
Open MPEG Streamclip and drag the VOB file to its window. Go to the MPEG Streamclip file menu and click on Export to DV.
After the export is done, you will have a DV file containing the iDVD theme. I would try adding that clip as your first entry in your slide show, assuming that you are running iDVD7. (You can't add a movie to a slideshow in iDVD6.) When you play your slideshow hopefully it will play the DV clip containing the theme, then seamlessly followed by your slide show. If it doesn't, try instead exporting the VOB file to a Quicktime Movie, and then try to add the Quicktime movie to your slideshow.
You might be able to do this easier if you created your slideshow in iMovie instead of iDVD. You could make an iMovie with the iDVD theme clip as the lead clip, and then share your iMovie project to iDVD.
Good luck with this. As I said, perhaps someone else has an easier way to do this and will chime in.

How to determine tempo of a clip?

First, when I loop a clip to determine it's BPM tempo, it's always slightly off, I know this because I previously had it looped in a sampler and the tempo was different and the loop is perfectly cropped, unless it's the sampler which is off... is there any other way to determine the tempo in Audition with markers or any other way that you know of? How do you yourself determine the tempo of various files?
Another instance I'm wondering about is If I'm trying to match up vocals for a remix and I know the tempo of my loops but not of the vocals, is there any way I can determine the BPM tempo of the vocals?... or atleast a rough estimate? probably not here.
What about for a passage that's over a minute long...?...Other then counting 1+2+3+4 for an entire minute.
4/4 signature of course.
thanks for any suggestions!

Select Bars and Beats as your current timescale on the Display Time Format menu. Then in the same menu you can use the Edit Tempo page to calculate your Tempo (see the Help file for use of all the options).

IMovie 09: How to export one single project

When I export as an mp4 or m4v, it actually exports ALL my projects. While viewing, if I click on the back button, it will switch to another video project. Only in QT can I export one at a time. I want to distribute only the one project not my whole repertoire. How do I do this?

Here's what I would do....
1) Drag all 25 clips to one sequence (5-10 seconds)
2) Right click on each clip, one at a time, and choose Nest (2-3 minutes)
3) Double-click on the first clip, which will open it's nested sequence on the timeline. Go to File>Export, then choose all your export settings and file-save location. Now click on Queue to start Adobe Media Encoder. After beginnig the export of the first clip, the export settings will remain the same for any clips you export after it, until you change the export settings again.
4) Repeat Step 3 for each remaining clip, excepting that you will not need to do export settings and file-save location again.
Total time: 15-20 minutes. Rendering time will vary.

¿¿ How to export a looped QT clip ??

Similar Messages

Maybe you are looking for