How to export a picture with copyrights?

Hello Forum,
I am trying to export images so when I print them or make a proofbook my copyright date and company name gets printed on them. I have the Aperture 2 training book and I can see the copyright on the screen but for the life of me can not get it to export that way. Please help!!!
Thank you in advance,
Mark

It tells you how to do this on page 501 of the Aperture2_UserManual.pdf

Similar Messages

I cannot seem to figure out how to export the pictures I have worked on. I create a collection and when I export them they go to "my pictures" as the originals --NOT the cropped and edited versions. Help!!!

How to export you pictures after they have been edited?

Are you sure you are looking at the exported photos and not the original photos, when you say you don't see the cropping and editing?
If so, then you are probably exporting with Image Format set to "Original" and you probably want to set it to JPG or TIF

How to export xy graph with indicator field.

hi,
I want export my graph in .emf format.For this i have used invoke node>>Image export. If i use this , i can only export the graph not other indicator filed(numeric and string indicatror).how can i export graph with indicator field??
here is .vi that i have used.
Solved!
Go to Solution.
Attachments:
Unbenannt 2.vi ‏12 KB

Thanks for your post in our Discussion Forum,
is it necessary to export the picture in the .emf Format?
Otherwise I can provide two possibilities:
The easiest way to make a screenshot of a certain area of the frontpanel is to
create a SubVI with all the elements you want to take a screenshot from and
then take a screenshot from the whole frontpanel of the SubVI.
This works fine although the frontpanel is not visible while the picture is taken.
The screenshot can be taken with a method-node as seen in the example attached to this post.
Another possibility is to crop a screenshot of a whole frontpanel to the region which you are interested in.
How this works is described here: http://forums.ni.com/t5/LabVIEW/take-screenshot-of-part-of-front-panel/td-p/1613750
The downside is that you have to manually set the region which might change due to scrolling or changes on the panel.
Best regards,
Peter
Attachments:
VI Screenshot.vi ‏13 KB

How to export project(s) with GPS data

I tried to export a project with GPS metadata but when I import that project (as a library) into my Aperture on my iMac, no GPS data...
Am I missing something obvious??
Adam

Hello Adam,
First of all - shift-L does NOT bring up the lift and stamp HUD on my Aperture 3...in fact, on the menu, it has no keyboard shortcut.
That is surprising for me, perhaps in my list of questions I should also have asked for your OS and exact Aperture Version. I tried this with OS Lion 10.7.2 and Aperture 3.2.1.
But you found how to bring forward the Lift&Stamp HUD, so that is not so important right now.
It is really good to know that you see GPS data on your images. Those you should be able to export.
I apply your smart album and it's rules, that image shows up...so if I see latitude/longitude data in the metadata tab, why does your smart album pull it out??
Probably your GPS tags contain Latitude/Longitude allright, but not the GPS version.
Remove the rule '"GPS Version" is empty' from the smart album, then you will see only those images that don't even have Latitude or Longitude. Hopefully that are not too many.
I guess from my perspective, if I either assign a "place" for my pictures or import GPS info from my Garmin, shouldn't that put the right metadata in so that it could be exported properly?? If not, when I move these images to my iMac I will have to redo ALL my places...which doesn't make sense...
Sorry if I'm not getting it...
sorry, if I am not explaining properly...
I have done some experiments right now with my current Aperture version 3.2.1 and surprise, surprise! Seems I have to eat my words.
In this version 3.2.1 assigning a place to an image seems also to set the GPS EXIF data, not only the places name as IPICT. What a relieve! I used to have to assign Places data over over again, because the places information would not be recognized by my other applications. So my advice to you is to upgrade to 3.2.1 if you have not done so.
I suspect the GPS data you see without "GPS Version"-tags are those you created manually in Places, wheras any other GPS data with GPS Version Tag come from your imported Garmin tracks.
I have to make further experiments with this new behaviour before I can feel confident to give advice, and I could use a helping hand here. Anyone?
@Kirby Krieger: I see you have been looking in on this thread, could you please confirm if this new places behaviour is also true in SL, if you have time?
Sofar I tested the following with several folders and it worked beautifully: Try it.
Export the folder from Aperture as a Library: File -> Export -> Project as a library
Reimport it to Aperture on your other machine: File -> Import -> Library/Project
Regards
Léonie

How to read a picture with Transparent Background?????

i read a png file - a picture with transperent back ground - with READ PNG File and display it in my program using a Draw Flattened Pixmap function.
i get a very dark background- black coulour- in the picture created.
How can i resolve this problem???
Please give your suggestions
Many thanks in advance
RENN
Kudos always welcome for helpful posts

continue discussion here

How do i take pictures with web cam

I have a hp 2000 windows 7 with a built in web camera and im trying to find out how to take pictures with my web camera. It only lets me use it on web sites.
This question was solved.
View Solution.

Hi,
There is a manual for it:
http://www.hp.com/ctg/Manual/c01455314.pdf
please also check one section on the following article:
http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&docname=c01923517
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

How can i sort pictures with AppleTV?

I dont speak verry good English, but i t tray to ask my question here.
Is ther somebody can tell me how you sort pictures with Apple TV?
I name my pictures by filename, with a name and numer like this : Belgium_0001, Belguim_0002, Belgium_0003 end....
Or Paris-0001 til Paris_9999.
On TV screen, the pictures are no in this order.
So how iTunes sort the pictures?
Regards,

Hi,
I am not sure, which sort order you want to achieve? If you sort by the date field, the images will be sorted chronologically, ascending or descending, according to date and time - isn't what what you want?
Can it be that you have a time zone problem? Compare the dates on the images that should be sorted side by side.
Unless you specify "Camera Time" and "Actual Time" on import, Aperture will assume that the camera time has been your current system time.
Canon 5D Mark II and Mark-III
And unfortunately, both your cameras are exactly the two cameras that I know, where the time zone correction in Aperture is buggy and does not have much effect. I cannot find the discussion again right now, but look for a thread by Frank Caggiano on time zone correction.
Regards
Léonie

How to export a table with a mixed case name using EXP untility

i'm trying to export a table which has a name with mixed upper and lower case. The command i'm trying is
exp USER/password TABLES=("MyTableName") FILE=ExportCNCS1.dat
and does not work.
Error:
Connected to: Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 - Produc
tion
With the Partitioning, OLAP and Data Mining options
Export done in WE8MSWIN1252 character set and AL16UTF16 NCHAR character set
About to export specified tables via Conventional Path ...
EXP-00011: USER.MYTABLENAME does not exist
Export terminated successfully with warnings.
I presume its saying the table doesnt exist because its looking for MYTABLENAME rather than MyTableName and doing this because its ignoring the double quotes. Any ideas?

Or, let the export prompt you for the table name:
C:\Temp>exp
Export: Release 9.2.0.7.0 - Production on Mon Aug 14 11:33:28 2006
Copyright (c) 1982, 2002, Oracle Corporation. All rights reserved.
Username: scott/tiger
Connected to: Oracle9i Enterprise Edition Release 9.2.0.7.0 - Production
With the Partitioning, OLAP and Oracle Data Mining options
JServer Release 9.2.0.7.0 - Production
Enter array fetch buffer size: 4096 >
Export file: EXPDAT.DMP >
(2)U(sers), or (3)T(ables): (2)U > T
Export table data (yes/no): yes >
Compress extents (yes/no): yes > no
Export done in WE8MSWIN1252 character set and AL16UTF16 NCHAR character set
About to export specified tables via Conventional Path ...
Table(T) or Partition(T:P) to be exported: (RETURN to quit) > MyTableName
EXP-00011: SCOTT.MYTABLENAME does not exist
Table(T) or Partition(T:P) to be exported: (RETURN to quit) > "MyTableName"
. . exporting table MyTableName 14 rows exported
Table(T) or Partition(T:P) to be exported: (RETURN to quit) >
Export terminated successfully with warnings.
C:\Temp>

Exporting of pictures with folders and subfolders from Aperture

I was importing folders with subfolders structure to Aperture 3.
Is possible later export my pictures from structure in Aperture to folders and subfolders with same structure like it was before importing to Aperture?
Thanks.
Roman

I'm assuming you imported using managed files and not referenced files? If referenced (leaving files in place), then your files are in the same folder structure as before.

How do I take pictures with my ipad

I have a first gen iPad and would like to know if and how I can use it to take pictures

You can't take pictures with the iPad 1 because it hasn't got a camera

How to export a QT with eight audio tracks

Hi All. I want to export a sequence with 8 separate audio tracks (interviews on 1&2, music on 7&8, sound effects and ambient sound on the others) so that the resulting QT has 8 separate and distinct tracks, matching the tracks in FC.
The goal is for a future editor at the TV station I work at to be able to take the video and ambient audio, but use different music.
In sequence settings, I've got 'audio output' set to 8, with each grouping checked 'dual Mono'. But when I export, I get a QT with a mixed down stereo pair on channels 1 and 2 (with audio from all the FC tracks), and six empty tracks.

I have a video tutorial...goes into a bit more detail, including how to make those 8 options happen:
Export Multiple Channels of Audio in FCP
http://library.creativecow.net/ross_shane/multi-audio/1

How to export table data with coloring of cell according to value.

Hi all,
I am using jdeveloper 11.1.1.6
i want to export table data with lot of formatting. like with coloring of cell according to value and so many.How to do that?

Hi,
like with coloring of cell according to value and so many.How to do that?
Answer is, you can't
Frank

How will I upload pictures with my ipad2 to Facebook

How will I upload pictures on Facebook with my ipad2 and iphone

Upload pictures to Facebook; use FaceBook app.
http://i1224.photobucket.com/albums/ee374/Diavonex/87f8433cf7d3e7e839ed454d56eb3 804.jpg

How to export animated gif with transparent background and glow effect?

I've been having issues lately with creating animated gifs in flash. I finally figured out a way to export a gif with a transparent background but I'm now having an issue with it again because I'm using a glow effect. When the gif is exported the glow effect changes into a very poor quality and becomes less of a glow and more like a solid color. I've even exported a png sequence from flash and put it into photoshop then created a gif from there but I'm still having the same issue. Is there anyway I can properly export this in gif form so the quality is the same as when I test it in flash?
I've provided an image of what my issue looks like and the settings (I've messed around with the settings and this is the best I can come up with) . This is in photoshop but the result is similar in flash. The left one is what it originally looks like and the right is what it will look like after exporting. As you can see as I said before the glow changes into more of a solid color kind of like a border. Any help would be greatly appreciated, thanks in advance!

A GIF is limited to 256 colors while a glow effect likely wants to tie up thousands (let's just say 'lots') of variations of tone.

How to have a picture with 3 people and put them in a picture with one person

I don't know if this would come under photomerge or not but I want to take this picture with 3 people in it and add them to a picture with just 1 person.

Use on of the selection tools, e.g. selection brush, lasso tool, to make a selection of the 3 people. Once you have a complete selection, you will see "marching ants" surrounding it
Go to Edit>copy to put the selection on the clipboard
Open the 2nd picture
Go to Edit>paste. The selection will be on its own layer
Get the move tool in toolbox, position the selection, and resize it, if necessary, with the corner handles of the bounding box.

How to export a picture with copyrights?

Similar Messages

Maybe you are looking for