How to export a Proxy video in MP4 and H.264

What's Proxy file, how does it look like? I know how to export mp4 and compress it with H.264, but what else should be included to make it a Proxy file from FCP6?
Thanks,
ZM

A "proxy" is just a lower resolution video file. It can be an MP4, or H.264, or any other flavor of Qt that is lower resolution than the master file. A timecode window burn in would be helpful.
www.imagineproducts.com has a great application that does this for you...automated. ProxieMill will make proxies from either captured media, or P2 cards...VERY useful
Shane

Similar Messages

How do I import a video in mp4 and export in QuickTime H.264?

Or is that even possible? Whenever I try I get a error "Incompatible codec..."

It's one file that was produced in a different video software that I used before purchasing Premiere Pro.
Most of it is composed of a series of stills, though there is a portion that is video (mp4 from the old software). I'm assuming I might have better luck creating a new video and exporting it in that format by importing the stills and video and working with them in Premiere Pro.

How can i sync videos to my iphone 5 using Itunes 11. i also tried to convert the videos to mp4 and drag and drop the file in itunes but still i cant see videos in itunes library.

how can i sync videos to my iphone 5 using Itunes 11. i also tried to convert the videos to mp4 and drag and drop the file in itunes but still i cant see videos in itunes library.

Copied from this link.
http://www.apple.com/iphone/specs.html
Video formats supported: H.264 video up to 1080p, 30 frames per second, High Profile level 4.1 with AAC-LC audio up to 160 Kbps, 48kHz, stereo audio in .m4v, .mp4, and .mov file formats; MPEG-4 video up to 2.5 Mbps, 640 by 480 pixels, 30 frames per second, Simple Profile with AAC-LC audio up to 160 Kbps per channel, 48kHz, stereo audio in .m4v, .mp4, and .mov file formats; Motion JPEG (M-JPEG) up to 35 Mbps, 1280 by 720 pixels, 30 frames per second, audio in ulaw, PCM stereo audio in .avi file format
There are 3rd party utilities available that "rip" content into a compatible format - most include an iPod and/or iPhone format selection. If a video plays in iTunes, iTunes includes an option to convert a selection for iPod/iPhone.

How to export 4K 60fps video in Premiere?

How to export 4K 60fps video in Premiere?
I just installed the latest Adobe Premiere PRO CC v8.0 as a trial test.
Source video is 3840x2160 60fps
i can't export it at the same settings i get this error:
And there is no Youtube 4K option
What to do how to export 4K 60fps?

Hi Seregal,
Sergey Lunev wrote:
How to export 4K 60fps video in Premiere?
I just installed the latest Adobe Premiere PRO CC v8.0 as a trial test.
I tried Premiere Pro CC and got the same result. Can you update to Premiere Pro CC 2014 or later and try another test?
Thanks,
Kevin

How to export an edited video to ...?

How to export an edited video to a pen drive or an external Hard Drive from FCP X? Thanks

It depends on a lot of factors like what the capabilities of the computers are and what quality you need and what you want to do with the video in addition to just playing it back. I don't know what's appropriate for you. If you select Computer you'll have few options. Vidoe and audio will give you more options to maintain the quality of the output.

HT201317 How do I transfer iPad videos to PC and then be able to burn a DVD? Thanks.

How do I transfer iPad videos to PC and then be able to burn a DVD? Thanks...

Welcome to the Apple community.
iTunes movies are protected and cannot be burnt to DVDs.

Exporting 7 min. video from Aperture and received error. How can I get the original back?

I uploaded a video from my iphone 5 into Aperture and then I tried to export it to my desktop. After I clicked on Export, it attempted to export for a while but then gave me an error message saying that 0 of 1 videos was exported and it couldn't export. Now it shows the video in the album in Aperture, but it won't play and I can't do anything with it. I have tried to recall the original but it says there is no original and it says there are no referenced files when I try to reference the files. The clip also shows an arrow pointing to the right with a yellow triangle by it. This is located in the bottom right of the image, right next to the video icon. My concern is that I tried to export the original. Any ideas on how I can fix this and get the video back?

The clip also shows an arrow pointing to the right with a yellow triangle by it. This is located in the bottom right of the image, right next to the video icon.
Is that the badge you are seeing? Then Aperture has lost the connection to the original video file.
Now it shows the video in the album in Aperture, but it won't play and I can't do anything with it. I have tried to recall the original but it says there is no original and it says there are no referenced files when I try to reference the files.
You tried to reconenct and locate the referenced file? Then you probably imported the video as "Managed" and then the commands for referenced files do not work.
Look directly into your Aperture library package, if the video is still there:
Select the Aperture Library in the Finder and ctrl-click(or right click) it.
Then select "Show Package Contents" from the pop-up.
In the Finder window that opens scroll down to the "Masters" folder and open its subfolder "2013" and then go to the month and day, when you imported your video. Do you see your video there, or any imports at all?
If you see the video in your library package, copy it to the Desktop, ad check, if you camn play it.
What do you see?
Regards
Léonie

How to export motion to video with audio..urgent

anyone can teach me how to export motion with audio?
cause i add audio when i craeting the motion...but when i export to video, there is no sound produce, only the image...
can tell me how to make it?

Make sure when you export you select the option to include audio. It seems some of the default settings do not include the audio.

How to export my finished video into facebook ?

I really dont know how to export my 30 min film into facebook any idea,s please...Thanks...

In FaceBook, start a new status update on your wall. Click "Attach" and select the Video Icon (2nd from left). Click "Upload Video". Click "Choose File". Navigate to your movie file.
Note: You will need to edit your movie. Facebook has a limitation of 20 minutes for Videos they host there. Or you can split it in two and post Part 1 and Part 2.
To split it, select your movie in the Project Library List in iMovie. Right-click on the name and select "Duplicate". You will now have two copies of your movie. Name one My Movie Part 1 and the other My Movie Part 2 (for example.) Then in Part 1, eliminate the scenes and the second half of the movie. Etc.

How to export many single video clips

I have around 25 videos in my project window that I want exported. Originally they were longer and I changed the in and out points. I now want to have these corrected videos saved to a different location on my computer. I still want the long video clips, but want the short or corrected ones too.
From what I understand, I would have to drag them individually to the sequence and render each one individually. I would rather not actually make a sequence with them all in one video but instead have them separate.
Can anyone help me with this? Thanks for you time and effort.

Here's what I would do....
1) Drag all 25 clips to one sequence (5-10 seconds)
2) Right click on each clip, one at a time, and choose Nest (2-3 minutes)
3) Double-click on the first clip, which will open it's nested sequence on the timeline. Go to File>Export, then choose all your export settings and file-save location. Now click on Queue to start Adobe Media Encoder. After beginnig the export of the first clip, the export settings will remain the same for any clips you export after it, until you change the export settings again.
4) Repeat Step 3 for each remaining clip, excepting that you will not need to do export settings and file-save location again.
Total time: 15-20 minutes. Rendering time will vary.

How to export photos from iMac to iPad and iPhone

How to export photos from iphoto to my iPad and iPhone the easiest way.

There are a number of methods including:
Via iTunes and USB cable: iTunes: Syncing photos - Apple Support
Via Photo Stream: http://support.apple.com/en-us/HT201317
Via 3rd party app: http://www.photosync-app.com
Via 3rd party cloud services such as Dropbox

How to export an entire model content (tables and charts) to pdf

Hello,
I would like to export a complete model, which includes tables and charts, to pdf.
I am already familiar with [this|https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/47fe4fef-0d01-0010-6f87-ed8ecb479123] tutorial but it explains how to do it for a single table and doesn't deal with charts. What I would like to do is take like a screenshot of the entire iView/model content to pdf.

Hi, rbish-
Not for the entire stage. The only thing you could do is to highlight everything and convert it to a symbol, then ensure that you move your triggers and labels to the new symbol. Then you could export an individual symbol, which will also package all of the dependent symbols.
Hope that helps,
-Elaine

How to export "Managed by" field of Distribution and Security groups and import with new values? (Exchange 2010, AD 2003)

My Active Directory environment is 2003 functional level and we have Exchange 2010.
I am trying to find out the best way to do a mass edit for the "Managed by" values of our security and distribution groups.
I know we can export the "managed by" field by csvde but I am not sure this is the correct way to do it. Also in the case that there are multiple users assigned to be managing a distribution group it only shows one value. Also powershell from Exchange
2010 can be used with "get-distribution" but as our AD environment is 2003 is this correct also?
Finally once the data is exported to csv can it be edited to then reimport and udpate the existing group managed by fields with new values?
Not really sure that the best way to go about this is.
Summary - We have 2003 AD with Exchange 2010 and I am trying to export a list of all our Distribution/Security groups showing the group name and managedby values so we can edit and update the
existing managedby values with new ones. In some cases we have multiple users as the owners.
Appreciate any advice on how this can be best achieved. Thank you.

Hi,
We can use the following command in Exchange 2010 to export "Managed by" field of Distribution and Security groups:
Get-DistributionGroup | Select-object Name,@{label="ManagedBy";expression={[string]::join(“;”,$_.managedby)}},Primarysmtpaddress | Export-Csv
C:\export.csv
After you changed the Managed by field in export.csv and saved it as a new file named import.csv, we can run the following command to set with new value:
Import-Csv C:\import.csv | Foreach-Object{ Set-DistributionGroup –Identity $_.Name –ManagedBy $_.ManagedBy}
Hope it works.
Thanks,
Winnie Liang
TechNet Community Support

How to export database from oracle 9.2 and 10g

Hi,
I want export the database from oracle 9i and 10g.
i tried like....... start button--->run--->exp--->
then it asked password. I have no password to my local database only scott/tiger. i given this, but in one attempt window has closed.
pls guide me how to export data.
Thanks and regards,
Venkat.

I have no password to my local database only scott/tigerThen use OS authentication :
C:\>set ORACLE_SID=<your SID>
C:\>exp \"/ as sysdba\" <options>or change passwords, e.g.
C:\>set ORACLE_SID=<your SID>
C:\>sqlplus "/ as sysdba"
SQL> alter user system identified by <new password>;

How to export animated gif with transparent background and glow effect?

I've been having issues lately with creating animated gifs in flash. I finally figured out a way to export a gif with a transparent background but I'm now having an issue with it again because I'm using a glow effect. When the gif is exported the glow effect changes into a very poor quality and becomes less of a glow and more like a solid color. I've even exported a png sequence from flash and put it into photoshop then created a gif from there but I'm still having the same issue. Is there anyway I can properly export this in gif form so the quality is the same as when I test it in flash?
I've provided an image of what my issue looks like and the settings (I've messed around with the settings and this is the best I can come up with) . This is in photoshop but the result is similar in flash. The left one is what it originally looks like and the right is what it will look like after exporting. As you can see as I said before the glow changes into more of a solid color kind of like a border. Any help would be greatly appreciated, thanks in advance!

A GIF is limited to 256 colors while a glow effect likely wants to tie up thousands (let's just say 'lots') of variations of tone.

How to export a Proxy video in MP4 and H.264

Similar Messages

Maybe you are looking for